Condition: used, tank capacity: 2,400 l, 2400 liter heatable/coolable tank made of V2A stainless steel Bjdpfeyfwr Hsx Ab Ioda

Condition: used, tank capacity: 3,000 l, 3000 liter pressure vessel made of V2A stainless steel Bodpeyfwtdefx Ab Isda

Condition: used, tank capacity: 1,050 l, 1050 liter pressure vessel made of V2A stainless steel Bdodeyfwtkepfx Ab Ija

Condition: used, tank capacity: 1,027 l, 1027-liter horizontal pressure vessel made of V2A stainless steel Bdjdpfxoyfwt Rj Ab Iea

Condition: used, tank capacity: 30,000 l, GENERAL INFORMATION Equipment: Spray head Design: Horizontal Remarks: 2 loose bearing shells made of Fe (galvanized) each; 1 manhole approx. 350 x 445 mm in the front end for each; noticeable dents in the cylinder Internal diameter: 3,100 mm Total length: 5,000 mm Mounting type: Saddles Location: Bremen Volume: 30,000 liters Cylinder wall thickness: 3.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical length: 3,700 mm EQUIPMENT Outlet: 65 mm Bdedpfx Aexqcncsb Iea TECHNICAL DATA / DIMENSIONS End wall thickness: 3.7 mm

Condition: used, tank capacity: 180,000 l, GENERAL Equipment: Crane lugs Design: suspended Outer diameter: 4,500 mm Inner diameter: 4,100 mm Total height: 17,000 mm Bdjdpfx Abexqcnie Ioa Heating/cooling: available Insulation: available Max. permissible operating temperature: 20°C Max. overpressure: 1.5 bar Location: Outdoor storage Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Volume: 180,000 liters Double jacket volume: 1,462.0 liters Condition: used Cylindrical height: 12,000 mm Last use: beer tank VESSEL Max. permissible operating temperature: 18°C Bottom: conical bottom EQUIPMENT Manhole / dome: in the upper head Outlet: available

Year of construction: 2011, condition: used, tank capacity: 1,100 l, GENERAL Equipment: Level indicator (without guarantee), disc valve, spray head, crane lugs Design: upright Year of manufacture: 2011 Notes: Exhibition tank - slight signs of use; yeast plug installed inside Outer diameter: 1,200 mm Inner diameter: 1,000 mm Total height: 2,580 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.00 bar Support type: feet Location: Bremen Technical documentation: drawing, TÜV certificates, CE marking and declaration of conformity, operating instructions Cylinder temperature control: thermoplate Nameplate: Volume: 1,100 liters Bjdpfxjxqcp Ho Ab Ijda Double jacket volume: 10.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4301 (AISI 304) Condition: unused Cylindrical height: 1,000 mm TANK Max. permissible operating temperature: 50 °C Bottom: conical floor Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 100 mm FEATURES Manhole / access: in cylinder Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Internal surface: high-gloss Feet material: stainless steel

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Spray head Bodpfxjxqc Sbo Ab Isda Design: upright Remarks: 1 dent in the inner tank (overpressure from the non-functional heating jacket; see photos); insulation jacket with minor dents and partially detached panels; tank has interior residues; mounts for load cells under the feet (3 loose load cells are included in the scope of delivery; these were not considered in the total height specification) Speed: 52 rpm External diameter: 1,900 mm Internal diameter: 1,790 mm Total height: 4,150 mm Agitator manufacturer: Jongia Insulation: available Power: 0.37 kW Agitator: paddle agitator Agitators: 3 agitators Agitator element: propeller Support: feet Location: Bremen Volume: 5,000 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Last application: food TANK Number of feet: 3 pcs INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: 48 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 2 Agitator arrangement: off-center in the top head Speed: 450 / 965 rpm Voltage: 400 V Power: 1.1 / 4.4 kW AGITATOR 1 Agitator manufacturer: Jongia Voltage: 230/400 V Agitator arrangement: central in the top head Agitator equipment: Propeller 3: agitator data no longer reliably readable; probably 460 / 920 rpm

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Features: Air/ventilation system, disc valve Design: vertical Speed: 0 - 85 rpm Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Max. viscosity: 5,000 mPas Top: agitator traverse with folding lid Agitator: blade agitator Base design: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Product-contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Material of feet: plastic AGITATOR 1 Voltage: 400 V Agitator arrangement: eccentric in top plate Bjdjxqc S Ijpfx Ab Ioda Agitator features: NORD frequency inverter 400V IP55 NORD helical gear unit made with latest aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit filled with food-grade Klüber oil Gear motor unpainted

Condition: used, tank capacity: 25,000 l, GENERAL Equipment: Venting/inlet and outlet, spray nozzle, crane lugs Design: vertical Remarks: Manway approx. 345 x 440 mm; wall thickness of lowest cylinder segment: approx. 4.0 mm Internal diameter: 2,600 mm Total height: 6,250 mm Agitator: agitator flange Foot design: height-adjustable feet Location: Bremen Nameplate: Capacity: 25,000 litres Cylinder wall thickness: 3.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,500 mm Last use: fruit juice industry TANK Bsdjxqc T Eepfx Ab Ijda Specific gravity of medium: 1.4 (to/m³) Number of feet: 3 units EQUIPMENT Manway / Dome: in cylinder Outlet: pipe end approx. Ø 100 mm Note: outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom plate thickness: 4.0 mm AGITATOR 1 Agitator position: eccentric in top head Top head wall thickness: 3.0 mm

Condition: used, GENERAL Other: Manufacturer: GRUNDFOS Bdjdpfx Ajxqc Dqob Ioa Type: CRN-7 F-P-G-E-HQQE Power: 1.10 kW Location: Bremen Condition: used

Condition: used, tank capacity: 100,000 l, 100,000 liter heatable/coolable pressure vessel made of V2A stainless steel Bjdpjyfwq Njfx Ab Ioda

Year of construction: 2019, condition: used, tank capacity: 1,000 l, 1000 liter pressure vessel made of V2A stainless steel Bdjdpfx Aoyfwt Deb Ija

Condition: used, tank capacity: 1,020 l, GENERAL Design: horizontal Remarks: Cooling system consisting of a copper pipe installed along the entire length of the tank; various manufacturers, therefore slight differences in design (for example, the tank from manufacturer Müller has a different frame and varying pressure ratings compared to the other two tanks, see photos) Heating/Cooling: available Insulation: available Max. permitted operating temperature: 50 °C Max. permitted operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Stand type: Frame Location: outdoor storage Nameplate: Volume: 1,020 liters Double jacket volume: 3.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Bdjdpfxox Dln Ss Ab Ija Last application: brewery TANK Max. permitted operating temperature: 50 °C INSULATION Insulating jacket: hermetically welded Insulation material: PU foam Insulation jacket material: stainless steel FEATURES Manhole / Dome: handhole MATERIAL SPECIFICATION Temperature control system material: copper

Condition: used, tank capacity: 2,400 l, 2400 liter heatable/coolable tank made of V2A stainless steel Bdsdpfxsyfwr To Ab Iea

Year of construction: 2000, condition: used, tank capacity: 3,500 l, GENERAL INFORMATION Equipment: Ventilation/inlet and outlet, Spray head, Lifting lugs Design: Vertical Year of manufacture: 2000 Remarks: Feet were originally mounted on load cells, which are no longer present (see photos); According to the nameplate, heating coil is rated for an operating pressure of 3 bar at a temperature of -5°C (see nameplate photos); Manhole diameter 430 mm; Manhole cover suspension incomplete Speed: 910 rpm External diameter: 1,560 mm Internal diameter: 1,350 mm Total height: 3,450 mm Heating/Cooling: available Insulation: available Power: 0.55 kW Max. allowable operating overpressure: 3.0 bar Agitator: Propeller Mounting type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 3,500 liters Double jacket volume: 62.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,500 mm Last application: Laboratory production TANK Bottom: Flat bottom with slope Number of feet: 3 pcs Bdsdpfsxqc Suex Ab Ioa INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole/Dome: On top cover Outlet: DN40 DIN 11851 MATERIAL CHARACTERISTICS Feet material: Stainless steel AGITATOR 1 Voltage: 230/400 volts Agitator arrangement: Side-mounted on the cylinder

Condition: used, tank capacity: 5,000 l, GENERAL Design: vertical Remarks: Frame construction of the legs made of Fe (see photos); calotte bolts of the legs missing; manhole diameter 450 mm Inner diameter: 1,990 mm Total height: 2,650 mm Agitator: agitator flange Support type: legs Location: Bremen Volume: 5,000 liters Bdedpfx Aboxqc Tls Isa Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,650 mm Previous application: fruit juice industry TANK Bottom: dished bottom Number of legs: 3 pieces EQUIPMENT Manhole / dome: in top head Outlet: 50 mm MATERIAL QUALITY Legs material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 1,285 l, GENERAL Equipment: Disk valve, spray head Design: upright/vertical Bsdexqcnvjpfx Ab Isda Remarks: According to information from the previous operator, the tanks were most recently used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were approved for a test pressure of +4 bar. However, a TÜV inspection was not carried out. Manway diameter: 350 mm. On one tank, one height-adjustable cap screw for the feet is missing; on another tank, the manway cover suspension is incomplete. External diameter: 1,160 mm Internal diameter: 1,000 mm Total height: 3,050 mm Heating/Cooling: present Insulation: present Max. overpressure: 2.0 bar Foot design: height-adjustable feet Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Volume: 1,285 liters Cylinder wall thickness: 2 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm Last application: brewery TANK Max. admissible operating temperature: 50 °C Bottom shape: conical bottom Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manway / dome: in top plate Outlet: DN40 DIN 11851 Note: slight residue MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2 mm Top wall thickness: 2.5 mm

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Bracing between the feet made of standard steel (see photos) Inner diameter: 2,200 mm Total height: 5,900 mm Heating/cooling: available Max. permissible operating temperature: 3 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 1.0 bar Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Volume: 15,000 liters Double jacket volume: 30.0 liters Cylinder wall thickness: 3.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,360 mm Last application: brewery TANK Bdsdpfsxqcpgsx Ab Isa Max. permissible operating temperature: 25 °C Number of feet: 3 pcs EQUIPMENT Manhole/dome: in cylinder (approx. 350 x 450 mm) Outlet: DN80 DIN 11851 Note: slight residues MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.4 mm

Condition: used, Year of construction: 2006, Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data  Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery  Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Max. 12 modules (10 functional, 2 defective) Control system | Siemens | Simatic Multi Panel | Touch control Pump system | Integrated pumps CIP / Backflush system Instrumentation | Pressure sensors, manual valves per module Bdsdpfoyycqljx Ab Isa

Condition: used, Year of construction: 1969, Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork Jansen & Sutorius N.V. | 1969 / 2020 | Multi-tank system with carbonation unit Plate heat exchanger | Alfa Laval  Pump unit | Siemens | With motor Control system | Kinco | HMI touchscreen Frequency converter  Bodpfeyycklox Ab Ieda

Condition: used, Year of construction: 2001, Overview  This shrink packaging machine (film only) was manufactured in 2001 by Italy SMI. The SMI LSK 45 is designed for film-only shrink wrapping of bottles in beverage production lines. The machine operates with 4 infeed lanes and supports multiple pack configurations and bottle formats. It was fully operational prior to dismantling in January 2026 and is currently dismantled. The machine is supplied with technical documentation. Technical data  Capacity: approx. 45 packs/min Formats: 3×2 / 3×3 / 4×3 Bottle formats: 500 ml / 1,000 ml / 1.5 L / 2.0 L Application: Shrink packaging (film only) Configuration: 4-lane infeed system, shrink film wrapping unit, shrink tunnel Scope of Delivery Shrink packaging machine | SMI | LSK 45 | 2001 | Film-only shrink wrapper with 4-lane infeed Shrink tunnel | SMI | 2001 | Integrated shrink tunnel Conveyor system |  With lane separation Control system | Control panel with Gefran temperature controller Bdedpfx Aoyycgtsb Isa

Condition: used, Year of construction: 2009, Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data Capacity: approx. 18,000 bottles/hour Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L Application: Roll-fed labelling of PET bottles Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Cooling unit | Kelvin Cool-Power | External cooling unit Control system | Control panel with process indicators Bsdoyyb Snspfx Ab Isda

Condition: used, Year of construction: 2017, Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data Capacity: approx. 12,000 bottles/hour Formats: up to 3 L PET bottles Application: PET bottle production Configuration: Rotary stretch blow moulding machine, 6 cavities Neck finish: PCO 1881 Scope of Delivery Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds Preform feeding system  Chiller unit  Air conveyor system  Control system | Integrated HMI Bdjdpfx Absyybkdj Ioa

Condition: ready for operation (used), Year of construction: 2010, Technical Details : - Year - 2010 Bdedpfjyyapfox Ab Ija - Capacity - 300 kg/h Complete line with automatic packing unit ! Perfect condition