Used beverage production for sale (1,129)

Condition: used, Year of construction: 1978, machine/vehicle number: 72418, with manual hydraulics and 79x plastic filter plates 1x VA starter plate 1x VA end plate Plates maximum: 150 Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 380x100x140 cm Gbodpfx Akoz Abmno Ujt Distance between first plate and spindle approx ca. 200cm

Condition: used, Machine: Filler volumetric Gbjdpfx Asz Aclxsk Uet

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Gedpjz Abkyefx Ak Uebt

Condition: used, incl. case for CIP Gbodpfxjz Aclrs Ak Ujt

Condition: used, Year of construction: 2011, Automatic labeling machine for glass bottles Manufacturer/Model: Makro MAK-1 4P Ua2 L2 Version with 2 self-adhesive labeling units MAK-A50 Suitable for front label and back label Output: up to approx. 3,000–3,500 bottles/hour Container diameter: 40–130 mm, container height: 140–380 mm Label length: 10–195 mm, label height: 10–180 mm Stainless steel version AISI 304, safety enclosure in accordance with CE PLC control with touch-screen display Automatic speed regulation and electric head height adjustment Optical orientation via sensors, plate rotation via stepper motors Installed power: approx. 4 kW Technical data: working direction: left-right, clockwise capacity bph max.: 4500 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 4 orientation: bottle plate with stepper motor, optical orientation using a photocell bottle diamater max (mm): 130 bottle diamater min (mm): 40 bottle height max (mm): 380 bottle height min (mm): 140 motor height adjustment: yes Godpfx Akjz Abkaj Uebt speed adjusment: frequence converter

Condition: excellent (used), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, Equipment: compressor, documentation/manual, High-end (!) Austrian Brewery, newly purchased in 2017 directly from the owner. It has been used less than 100 times ever since because it is positioned at a remote location away from the main brewery. It has been maintained very well, ready for inspection. Ideally for brew-pubs. It is 5HL machine but can do 2 brews simultaneously, so effectively it can be considered a 10HL machine. It has 4 Uni-tanks of 12 HL and all the necessary equipment, such as cooling, to make it a turn-key brew installation of a premium quality. Also all necessary hoses plus a mobile pump for CIP of the Unitanks, etc. Original documentation available, in German, showing that all equipment was purchased at the Labu factory. This whole set would currently cost approx. 240.000€ (ex VAT, ex works). Delivery possible per direct after dismantling. We could provide a proper instruction / training by one of our senior brewers. Current asking price is approx. 135K€, ex VAT ex work but including instruction. The brewery is located in the Amsterdam area, the Netherlands Gbedpfx Akozz Rlws Ust

Condition: used, Year of construction: 2009, machine/vehicle number: 09-0116, Cardboard labeling HERMA DS Gbsdpfx Aez Ablqok Uet

Condition: used, Year of construction: 2007, Machine: Kematec Sekam 1AF/EA Sparkling wine capsiling Sekam 1AF/EA Gedpfx Akjz Abiij Ujbt

Condition: used, Year of construction: 2006, machine/vehicle number: 1434, Suitable for piccolo bottles With optical orientation for sparkling wine Godpfjz Abh Esx Ak Ujbt Working direction: left-right

Condition: used, Year of construction: 1986, Laufrichtung links-rechts, Kronenkorker 26mm, für Bier geeignet mit Vorevakuierung working direction: left-right capacity / hour ca.: 3000 weight [kg.]: 3200 Strom / Volt: 400 Gjdozz Rl Dspfx Ak Uobt

Condition: used, Year of construction: 2005, The machine is dosing ClO2 into water to use it in a Rinser. Gbjdpfx Aez Abl Djk Ust

Condition: used, Year of construction: 2017, machine/vehicle number: 472447, LEIBINGER TRANSVASA 12/6 EK – monobloc counter-pressure bottle emptying / transfer machine for carbonated beverages in glass bottles IDENTIFICATION - Manufacturer: LEIBINGER - Model: TRANSVASA 12/6 EK - Year of manufacture: 2017 - Serial/order number: 472447 - Previous application: cider FUNCTION AND OUTPUT - 12 emptying valves - Counter-pressure emptying with long-tube technology - 6 decapping stations - Direction of operation: clockwise - Nominal output: 2,500 bottles/h for 0.75 l bottles - Adjustable range: 560–2,800 bottles/h - Designed for carbonated beverages, e.g. traditionally produced cider - Automatic removal and collection of pierced bottle closures - Integrated through conveyor PRODUCT AND UTILITY DATA - Maximum product temperature: 20 °C - Compressed air: 6 bar; connection R 1/2" Gedpjzz Rmbjfx Ak Uebt - CO₂ product pressure: 8 bar; gas connection R 1/2" - Product outlet: DN 40 - Gas discharge: DN 40 - Buffer tank: 100 l nominal volume according to the order confirmation; 108 l according to the rating plate - Product pump: stainless-steel rotary lobe pump, material 316L - Conveyor height: 1,000 mm ± 50 mm ELECTRICAL DATA - Operating voltage: 400 V - Control voltage: 24 V DC - Frequency: 50 Hz - Main drive: max. 0.75 kW MATERIALS AND DESIGN - Product-contact parts mainly made of stainless steel 316Ti and 316L - Main pipework made of stainless steel 316L - Emptying tubes made of stainless steel 304 - Food-grade plastics, e.g. POM and PTFE - Food-grade elastomers, e.g. EPDM - Hygienic tubular frame design without horizontal collection surfaces - Frameless Makrolon safety guarding with interlocked doors and removable covers - CIP connections - Mechanical lifting pistons press the bottles against the emptying valves - Bottle-presence monitoring at the infeed and jam monitoring at the discharge - Central safety clutch - Height-adjustable machine feet - CE-compliant design at the time of delivery ACCESSORIES AND DOCUMENTED BOTTLE FORMATS - SOWEC SO filter, year 2017 - Order confirmation: guide parts for one bottle format included - Lightweight 75 cl cider bottle: height 290 ± 1.8 mm, body diameter 82.8 ± 1.5 mm, 29 mm crown finish, approximate brimful capacity 78.5 cl, approximate glass weight 540 g - Méthode Traditionnelle 75 cl bottle, model 1164/320: height 300 ± 1.8 mm, body diameter 85.9 ± 1.5 mm, 29 mm crown finish, filling capacity 750 ± 10 cm³ at 72 mm, approximate glass weight 775 g, maximum carbonation 5.0 volumes CO₂ The original order confirmation, operating manual and bottle data sheets are available. The completeness and condition of the format parts and accessories currently present must be verified before use.

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats Gedpfx Akszzz Naj Uebt - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 1992, Stainless Steel Storage Tank Gjdpfx Aez Abkmsk Usbt

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request. Godpfozzz N Hjx Ak Ujbt

Condition: used, Year of construction: 2003, Capacity: up to 25.000 l/h Godpfxjz Abico Ak Ujbt

Condition: used, Year of construction: 1979, machine/vehicle number: 61/32401/06, 3000l/h Liter per hour: 3000 Godpfx Akszz Rqao Uobt

Condition: used, machine/vehicle number: 329601, Machine: Bortolin Kemo Mara H-M Carton sealer MARA H-M Gbjdpfez Abhljx Ak Uet

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg Gedpfszzz Rdsx Ak Usbt - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring Godpfozzz R Dsx Ak Usbt - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2000, Manufacturer: FIMER, type T/6-V.A. Year of constr. 2000 6 capping heads. for 28 MCA amount of capping heads: 6 working direction: right-left (CCW) Technical data: Gjdpfsz Abk Tex Ak Uebt working direction: right-left number of heads: 6 capacity bph max.: 12000

Condition: used, Year of construction: 2011, machine/vehicle number: 11M095, - with 2 cap conveyors (BVS 30x60 and MCA 28) - incl. cap control unit - 3 sets of format parts complete incl. screw conveyors 1x0.75 litre round Ø 75 mm, 1x1.0 litre round Ø 90 mm, 1 x 0.25 litre round Ø 57 mm Technical data: working direction: left-right number of heads: 4 capacity bph max.: 7000 Gbedpfx Akjzz Rulo Ust speed adjusment: frequence converter

Condition: used, Year of construction: 2014, machine/vehicle number: 1404902, Self adhesive labeler 2 stations farmat 46mm diam Technical data: working direction: left-right, rotative, counter clockwise capacity bph max.: 6000 labels: self adhesive labels number of labelling stations: 2 Gbjdpfx Aezz Rxkok Uot number of bottle plates: 9 bottle diamater max (mm): 125 bottle diamater min (mm): 40 bottle height max (mm): 330 bottle height min (mm): 60 speed adjusment: frequence converter

Condition: used, Year of construction: 2006, for adhesive tape below. Gjdezz Rnlspfx Ak Usbt Optional on top - fully automatic sealing, Gluing drive: -drive motor for feed belts -pneumatic arm to close the lid

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Complete craft beer bottling line: Cime Careddu GOLD DPS 6/6/1 rotary triblock (rinser – isobaric filler with double pre-evacuation – crown capper) and matching Compatta self-adhesive labeler. Both manufactured in 2018, installed in 2019 by Coenco (official Cime Careddu agent for the Benelux), professionally maintained, with low operating hours. Available immediately from a brewery in Dokkum, the Netherlands, due to production shutdown. 1. Triblock – Cime Careddu GOLD DPS 6/6/1 CROWN Type: rotary triblock (rinser – isobaric filler – crown capper) in stainless steel Year of manufacture: 2018 (serial no. 708) Rinser: 6 grippers, water rinse Filler: 6 isobaric (counter-pressure) filling valves with double pre-evacuation (DPS) and CO₂ pressurization for low dissolved oxygen Capper: 1 head for 26 mm crown caps, with crown feeder Capacity: approx. 1,000–1,200 bottles/hour (33 cl) Bottle formats included: [e.g. 33 cl longneck Ø 60 mm, 33 cl Steinie Ø 69 mm, 75 cl Ø 85 mm – fill in] CIP: cleaning-in-place connections for internal and external sterilization Electrical: 400 V / 50 Hz / 3-phase + N Operating hours: approx. [xxx] hours (approx. [xxx,xxx] bottles filled) CE certified, safety guarding fitted 2. Labeler – Cime Careddu / ENOS Compatta Gjdpfx Akszza Rie Ujbt Type: linear self-adhesive labeling machine, one label station (front or wrap-around label) Year of manufacture: 2018 (serial no. 720) Capacity: up to approx. 1,800 bottles/hour Electrical: 400 V / 50 Hz / 3-phase + N Manual station adjustment, suitable for round bottles from 25 to 75 cl