Used other food technology for sale (241)

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Iiodpsy Dvpvofx Akxsa Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: used, Multi-person workstation, see photo's for more details. Ijdpeu Nm Rasfx Akxoia

Year of construction: 1995, condition: good (used), Item: M-2068-Collette-CVC50 Iiodpfx Akoh Dbvtsxea Mixer and aerator line Manufacturer: Collette (GEA) Model: Converticoll CVC 50 Year of manufacture: 1995 For mixing and foaming of dairy or confectionary products

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: 99.103.902, For sale is an almost new Marcelissen Slitmaster French Fry Cutter, year of manufacture 2022. This machine was used for approximately one week in a professional kitchen and has been thoroughly cleaned and maintained since. It is in like-new condition—visually and technically flawless, with no signs of wear and no defects. Iijdpfx Akey Dvicoxja The Slitmaster 85 is a high-quality Dutch cutting machine that precisely and evenly cuts potatoes up to 85 mm in diameter into long, straight French fries. It minimizes waste and delivers professional results—ideal for the foodservice industry, snack bars, catering, or small-scale food processing. Technical specifications: - Manufacturer: Marcelissen (Netherlands) - Model: Slitmaster 85 French Fry Cutter - Year of manufacture: 2022 - Machine no.: 99.103.902 - Motor: DERTEC stainless steel motor 0.37 kW (230/400 V, food grade) - Material: Fully stainless steel construction - Features: Large feed hopper, conveyor belt discharge, emergency stop, intuitive controls - CE certified Condition: Like new – only approx. 1 week in use. The machine can be inspected, tested, and demonstrated on site. Price: €7,900 negotiable (ONO) Terms of sale: Collection only (no shipping). Location: 64331 Weiterstadt, Germany. The machine is immediately available. I am happy to arrange a viewing appointment. If you have any questions or are interested, please get in touch – you'll receive a quick response!

Year of construction: 2026, condition: like new (used), functionality: fully functional, overall weight: 49 kg, total length: 600 mm, total width: 800 mm, total height: 990 mm, machine/vehicle number: 2026, Table Trolley TW 800 Stainless steel table trolley Worktop on top Shelf below Rugged construction Dimensions: 800 x 600 x 990 mm (W x D x H) Mobile with 2 braked castors Iisdpfx Ajy Ac Ucekxsa As new condition

Year of construction: 2003, condition: like new (used), functionality: fully functional, CYLINDRICAL STORAGE SILO for liquids, made of food-grade stainless steel, mounted on 4 robust stainless steel legs with height-adjustable feet (never used) TECHNICAL DATA Dimensions: Ø 190 cm Height from ground: 330 cm Usable capacity: approx. 8,000 liters Full discharge via central cone Iiodpjy Dpyusfx Akxsa Top inspection manhole Top loading inlet device Top vent valve Top fitting with automatic washing device Heavy-duty stainless steel rings for lifting, hoisting, and moving Material suitable for food use (never used) Year of manufacture: approx. 2003 Asking price: EXW €2,900.00 + VAT Payment in advance

Condition: used, Manufacturer : Clextral Model : Evolum 32 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled Iodoy Abclspfx Akxjia DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Condition: like new (used), functionality: fully functional, - TIME AND TEMPERATURE CONTROLLER - Drum diameter: 1.80 m Designed for pulses and vegetables, also suitable for blanching many other fruits. Automatic regulation of the blanching temperature. Iisdpeynknmefx Akxja Internal screw conveyor for blanching fruit. Water recirculation to homogenize the internal temperature.

Condition: used, functionality: fully functional, Precise Defect Identification The Optyx sorting platforms are characterized by exceptional color, shape, size and texture recognition. High resolution Vis/IR, Tri-chromatic, or UV cameras ensure even the subtlest defects are identified and targeted for removal increasing quality. Precise Removal of Defects and Foreign Material The intelligent ejection system features precision pneumatic-based valves with exceptional response time for pinpoint accuracy. Unparalleled yield improvement can be achieved with the optional three-way sorting. Intelligent Sorting Advanced object-based image processing allows FMAlert™ to track foreign material providing you with a digital record. Custom algorithms determine shape, length, width, curvature, symmetry, circularity and other special characteristics improving quality. Using cameras, Optyx recognizes the size and shape of each object, as well as millions of subtle color differences. As the product passes through the sorter, it inspects it from above while on the conveyor belt. The product is then moved to the end of the Optyx conveyor for an overhead view from below. Using proprietary image processing technology designed specifically for dates, the sorter quickly analyzes the images, comparing each item to previously defined standards as accepted or rejected. When the sorter identifies objects to separate from the main product section, it activates the ejector system, comprised of a series of air valves that reach the full width of the system. As the air is expelled, the valves identify each object to be separated and removed from the main product section. Features & Benefits • Multiple camera configurations to match product requirements • High Resolution Vis/IR, UV or Tri-chromatic camera options • HID, UV, & LED lighting options • Simple, user-friendly operation, cleaning and maintenance • Easy adjustment for product change over • Wet or dry products. Typical Applications Potatoes (chips, whole, strips, sliced, diced, wedges), fruits, nuts, vegetables, cereal, confectionery, dry beans, fresh-cut (including core removal), raisins, snack foods, wet or dry products. Isdewnxupjpfx Akxsia Sorting Excellence Green bean processors use an Optyx 3000 to re-sort the defect streams of other sorters to increase yields. Output. 6 TN metric/H = 13,000 lbs/h = 5,896 kg/h. Production may vary depending on the product. Work measures: Long tape: 2.20 m. Tape width: 0.66 m Download: 1.22 m.

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. Iiedpfx Akex S Ipwexja - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: like new (used), functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Rotary autoclaves: These are used to sterilize products that present greater difficulties in heat transmission. Examples include vegetables in grains, grated or diced, and beverages such as milkshakes, teas, coffees, or evaporated milk. In this type, the basket rotates inside the autoclave, stirring the contents and preventing the pieces closest to the sides of the vessel from roasting. Isdpex Tilisfx Akxjia Distance between rollers:

Condition: like new (used), Rotary autoclave SURDRY 1 B Iisdpfx Akexp Rqvexoa

Condition: like new (used), functionality: fully functional, Features: - Automatic can feeding with synchronised auger. - Lid feeding from both sides (right and left). - Rotary clinching system using guides and inverted ramp with smooth approach, allowing for 10-20 mm overfills. - Upper transmission unit in oil bath supported by production and consistency in closure quality. - Closure technology with progressive closure system and stainless steel head. - Stainless steel protection and safety guards. - Maximum production: 100 cans/min. - Production with the current format (127 mm) carried by the machine is approximately 80 cans/minute. Technical data: Max. diameter 160 mm Min-max height 20-175 mm Iodsyrfbvspfx Akxoia Rotary clincher with guides * Production may vary depending on the format and product to be sealed.

Condition: like new (used), functionality: fully functional, The GG 90 capsuling machine is an in-line machine suitable for vacuum sealing jars and bottles with a wide range of caps. A magnetic feeder for metal caps is available as an option. Iisdex S Et Hepfx Akxsa Immediately afterwards, sealing is carried out using appropriate threading and pressure belts. Machine designed for closing glass jars, PET jars, etc., compatible with TWIST-OFF or PT closure systems. Production output may vary depending on the product and the format to be sealed.

Condition: excellent (used), A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom. Therefore, we are not only talking about mixing particles, but about a more complex process that can integrate emulsification, homogenization, solubilization, suspension, dispersion and disintegration of solid particles. To carry out this particle size reduction, the product is pumped under pressure by means of valves and pistons in monobloc compression blocks. These valves allow us to define the desired flow rate and pressure. Iiodpfx Akowny Nzsxoa

Condition: like new (used), It is suitable for direct filling of whole solid products of medium and large dimensions in cans, jars, plastic containers, etc. Products: peach halves, pear halves, whole peeled tomatoes, olives, cucumbers, carrots, apricots, artichoke hearts. - Production capacity will depend on the format and the product to be filled. Iodpfjxp Rqpox Akxoia

Condition: like new (used), functionality: fully functional, Jar closing machine for glass, PET, etc. formats, for TWIST-OFF type closing system. Isdpfxjycgn So Akxeia The EMERITO 1.8 closing machine is designed to close TWIST caps on glass jars with cap diameters from Ø30 mm to Ø82 mm. Featuring an exclusive design, it stands out for its user-friendliness and simple format changeover without the need for additional tools. In addition to the closing mechanism, it is equipped with an automatic cap feeder. Optionally, it can be complemented with a steam injection system to achieve vacuum sealing.

Condition: like new (used), Triblock rinser/filler for sparkling wine with gas and corker for cork stoppers. Output varies according to product, format, and filling capacity. Production up to: 8,000 bottles/h (130 bottles/min). Iiedex S Ix Sopfx Akxea

Condition: excellent (used), Program-controlled pasteurizer for fruit juices and cremogenates with indirect heating and a regenerative heat exchanger circuit, including a CIP connection. Features: *Production: 30,000 l/h depending on the product. *Number of tubes: 94. *Includes Simens Simatic control panel. Iisdpfjwnzcpox Akxea *Max. viscosity: 25 cp/10°C *Max. pulp percentage: 89% *Max. fiber length: 6-8 mm.

Condition: like new (used), The production will vary depending on the product. Ijdoyn Hcaopfx Akxoia

Condition: like new (used), functionality: fully functional, Stainless Steel Roller Washer + Roller Sorting Isdpfsynkknex Akxoia

Condition: used, functionality: fully functional, Zilli & Bellini telescopic fillers are suitable for handling a wide range of products, from free-flowing granular products to whole peeled tomatoes. Isdswnd Emopfx Akxoia Suitable for round and non-round containers made of metal, glass, plastic. Specially designed to compact dense and difficult to fill products inside the container after piston filling. PRODUCTS: peeled tomatoes (whole, sliced and diced) olives (whole and sliced) mushrooms (whole and sliced) PET FOOD pulses: peas, chickpeas, lentils, beans and broad beans vegetables (whole, sliced and diced): carrots, potatoes, onions, corn kernels, green beans, etc. fruits (whole, sliced and diced): cherries, strawberries, plums, currants, apricots, pears, peaches, etc. ravioli, pasta, cereals and rice. cockles and mussels. * Production may vary depending on the format and product to be filled.

Condition: like new (used), The system consists of, after feeding the multihead weigher, the product passes through the feeder, which transfers it to the center of the rotating cone. The cone then conditions the product by rotating it evenly across the dosing paths. An adjustable vibration transfers a random quantity, preferably between 20% and 30% of the desired nominal weight, to the pre-dosing containers, from where it is transferred as needed to the weighing containers. Min weight: 50 gr. Max weight: 5000 gr. INCLUDES: 4 types of funnels according to the required format and the electric panel. PRODUCTS: products with very different characteristics (granular, powder, or chunks) Iijdpfoyn Htxsx Akxoa 14 WEIGHING HEADS.

Year of construction: 1998, condition: used, Manufacturer : Clextral Model : BC 45 Year : 1998 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion AC motor: 25 kW Length of screw/barrel: 1800 mm Isdpfx Aeyzt Ukekxsia Screw elements: nominal diameter 55 mm. L/D : 33 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Year of construction: 1990, condition: used, Manufacturer : Clextral Iedpoyzt Udjfx Akxsia Model : BC 45 Year: 1990 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire DC motor: 21 kW Length of screw/barrel: 1500 mm Screw elements: nominal diameter 55 mm. L/D : 27 Included in the package: Granulator, water pump and control panel Peripheral equipment not included but available on request: Dosing unit. (Its integration may be subject to a feasibility study and a supplementary quotation.)