Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Spray head Design: upright Remarks: 1 dent in the inner tank (overpressure from the non-functional heating jacket; see photos); insulation jacket with minor dents and partially detached panels; tank has interior residues; mounts for load cells under the feet (3 loose load cells are included in the scope of delivery; these were not considered in the total height specification) Speed: 52 rpm External diameter: 1,900 mm Internal diameter: 1,790 mm Total height: 4,150 mm Agitator manufacturer: Jongia Hjdpfexqc Sbex Ab Ijk Insulation: available Power: 0.37 kW Agitator: paddle agitator Agitators: 3 agitators Agitator element: propeller Support: feet Location: Bremen Volume: 5,000 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Last application: food TANK Number of feet: 3 pcs INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: 48 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 2 Agitator arrangement: off-center in the top head Speed: 450 / 965 rpm Voltage: 400 V Power: 1.1 / 4.4 kW AGITATOR 1 Agitator manufacturer: Jongia Voltage: 230/400 V Agitator arrangement: central in the top head Agitator equipment: Propeller 3: agitator data no longer reliably readable; probably 460 / 920 rpm

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Features: Air/ventilation system, disc valve Design: vertical Speed: 0 - 85 rpm Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Max. viscosity: 5,000 mPas Top: agitator traverse with folding lid Agitator: blade agitator Base design: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Hedpfxjxqc S Io Ab Iek Nameplate: Volume: 550 liters Product-contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Material of feet: plastic AGITATOR 1 Voltage: 400 V Agitator arrangement: eccentric in top plate Agitator features: NORD frequency inverter 400V IP55 NORD helical gear unit made with latest aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit filled with food-grade Klüber oil Gear motor unpainted

Condition: used, tank capacity: 25,000 l, GENERAL Equipment: Venting/inlet and outlet, spray nozzle, crane lugs Design: vertical Remarks: Manway approx. 345 x 440 mm; wall thickness of lowest cylinder segment: approx. 4.0 mm Internal diameter: 2,600 mm Total height: 6,250 mm Agitator: agitator flange Foot design: height-adjustable feet Location: Bremen Nameplate: Capacity: 25,000 litres Cylinder wall thickness: 3.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,500 mm Last use: fruit juice industry TANK Specific gravity of medium: 1.4 (to/m³) Number of feet: 3 units EQUIPMENT Manway / Dome: in cylinder Outlet: pipe end approx. Ø 100 mm Note: outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom plate thickness: 4.0 mm AGITATOR 1 Agitator position: eccentric in top head Top head wall thickness: 3.0 mm Hsdpjxqc T Eefx Ab Ijk

Condition: used, tank capacity: 1,020 l, GENERAL Design: horizontal Remarks: Cooling system consisting of a copper pipe installed along the entire length of the tank; various manufacturers, therefore slight differences in design (for example, the tank from manufacturer Müller has a different frame and varying pressure ratings compared to the other two tanks, see photos) Heating/Cooling: available Hsdpfx Abjx Dln Se Ijk Insulation: available Max. permitted operating temperature: 50 °C Max. permitted operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Stand type: Frame Location: outdoor storage Nameplate: Volume: 1,020 liters Double jacket volume: 3.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: brewery TANK Max. permitted operating temperature: 50 °C INSULATION Insulating jacket: hermetically welded Insulation material: PU foam Insulation jacket material: stainless steel FEATURES Manhole / Dome: handhole MATERIAL SPECIFICATION Temperature control system material: copper

Condition: used, tank capacity: 2,400 l, 2400 liter heatable/coolable tank made of V2A stainless steel Hjdpoyfwr Tjfx Ab Isk

Year of construction: 2000, condition: used, tank capacity: 3,500 l, GENERAL INFORMATION Equipment: Ventilation/inlet and outlet, Spray head, Lifting lugs Design: Vertical Year of manufacture: 2000 Remarks: Feet were originally mounted on load cells, which are no longer present (see photos); According to the nameplate, heating coil is rated for an operating pressure of 3 bar at a temperature of -5°C (see nameplate photos); Manhole diameter 430 mm; Manhole cover suspension incomplete Speed: 910 rpm External diameter: 1,560 mm Internal diameter: 1,350 mm Total height: 3,450 mm Heating/Cooling: available Insulation: available Power: 0.55 kW Max. allowable operating overpressure: 3.0 bar Agitator: Propeller Mounting type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 3,500 liters Double jacket volume: 62.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,500 mm Last application: Laboratory production TANK Bottom: Flat bottom with slope Number of feet: 3 pcs INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole/Dome: On top cover Hedpfx Abexqc Suj Isk Outlet: DN40 DIN 11851 MATERIAL CHARACTERISTICS Feet material: Stainless steel AGITATOR 1 Voltage: 230/400 volts Agitator arrangement: Side-mounted on the cylinder

Condition: used, tank capacity: 5,000 l, GENERAL Design: vertical Remarks: Frame construction of the legs made of Fe (see photos); calotte bolts of the legs missing; manhole diameter 450 mm Inner diameter: 1,990 mm Total height: 2,650 mm Agitator: agitator flange Support type: legs Location: Bremen Volume: 5,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,650 mm Previous application: fruit juice industry TANK Bottom: dished bottom Number of legs: 3 pieces Hodpfx Aboxqc Tls Iok EQUIPMENT Manhole / dome: in top head Outlet: 50 mm MATERIAL QUALITY Legs material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 1,285 l, GENERAL Equipment: Disk valve, spray head Design: upright/vertical Remarks: According to information from the previous operator, the tanks were most recently used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were approved for a test pressure of +4 bar. However, a TÜV inspection was not carried out. Manway diameter: 350 mm. On one tank, one height-adjustable cap screw for the feet is missing; on another tank, the manway cover suspension is incomplete. External diameter: 1,160 mm Internal diameter: 1,000 mm Total height: 3,050 mm Heating/Cooling: present Insulation: present Max. overpressure: 2.0 bar Foot design: height-adjustable feet Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Volume: 1,285 liters Cylinder wall thickness: 2 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm Last application: brewery TANK Max. admissible operating temperature: 50 °C Bottom shape: conical bottom Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manway / dome: in top plate Outlet: DN40 DIN 11851 Note: slight residue MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Hedpfx Abjxqcnvs Ijk Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2 mm Top wall thickness: 2.5 mm

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Bracing between the feet made of standard steel (see photos) Inner diameter: 2,200 mm Total height: 5,900 mm Heating/cooling: available Max. permissible operating temperature: 3 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 1.0 bar Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Hodpfx Abexqcpgj Ijk Volume: 15,000 liters Double jacket volume: 30.0 liters Cylinder wall thickness: 3.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,360 mm Last application: brewery TANK Max. permissible operating temperature: 25 °C Number of feet: 3 pcs EQUIPMENT Manhole/dome: in cylinder (approx. 350 x 450 mm) Outlet: DN80 DIN 11851 Note: slight residues MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.4 mm

Condition: used, Year of construction: 2006, Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data  Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery  Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Max. 12 modules (10 functional, 2 defective) Control system | Siemens | Simatic Multi Panel | Touch control Pump system | Integrated pumps CIP / Backflush system Instrumentation | Pressure sensors, manual valves per module Hedpfx Abeyycqlj Ijk

Condition: used, Year of construction: 1969, Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork Jansen & Sutorius N.V. | 1969 / 2020 | Multi-tank system with carbonation unit Plate heat exchanger | Alfa Laval  Pump unit | Siemens | With motor Control system | Kinco | HMI touchscreen Frequency converter  Hedpoyycklsfx Ab Isk

Condition: used, Year of construction: 2001, Overview  This shrink packaging machine (film only) was manufactured in 2001 by Italy SMI. The SMI LSK 45 is designed for film-only shrink wrapping of bottles in beverage production lines. The machine operates with 4 infeed lanes and supports multiple pack configurations and bottle formats. It was fully operational prior to dismantling in January 2026 and is currently dismantled. The machine is supplied with technical documentation. Technical data  Capacity: approx. 45 packs/min Formats: 3×2 / 3×3 / 4×3 Bottle formats: 500 ml / 1,000 ml / 1.5 L / 2.0 L Application: Shrink packaging (film only) Configuration: 4-lane infeed system, shrink film wrapping unit, shrink tunnel Scope of Delivery Shrink packaging machine | SMI | LSK 45 | 2001 | Film-only shrink wrapper with 4-lane infeed Shrink tunnel | SMI | 2001 | Integrated shrink tunnel Conveyor system |  With lane separation Control system | Control panel with Gefran temperature controller Hedpfx Aeyycgtob Ijk

Condition: used, Year of construction: 2009, Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data Capacity: approx. 18,000 bottles/hour Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L Application: Roll-fed labelling of PET bottles Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Cooling unit | Kelvin Cool-Power | External cooling unit Control system | Control panel with process indicators Hsdpfxsyyb Snj Ab Ijk

Condition: used, Year of construction: 2017, Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data Capacity: approx. 12,000 bottles/hour Formats: up to 3 L PET bottles Application: PET bottle production Configuration: Rotary stretch blow moulding machine, 6 cavities Neck finish: PCO 1881 Scope of Delivery Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds Preform feeding system  Chiller unit  Air conveyor system  Control system | Integrated HMI Hodpsyybkdefx Ab Ijk

Condition: ready for operation (used), Year of construction: 2010, Technical Details : - Year - 2010 - Capacity - 300 kg/h Hsdpfxoyyapfs Ab Ijk Complete line with automatic packing unit ! Perfect condition

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection Hsdpfxeyx Tmno Ab Iek overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: used, all stainless steel electrically heated (= 300 kW) total power 313 kW nett belt length 5.000 mm nett belt width 650 mm Hedjyx Tl Ropfx Ab Iek frying time min/max : 20-250 sec throughput speed min/max 1,2-15 m/min min. oil volume at oil level of 2cm above the belt : ± 1.009 L max. oil level above the belt : 90 mm setting overheating protection : 220°C adjustable speed outfeed conveyor oil level control circulation pump sediment removal system filter lifting unit with electric hoists weight : 4.000 kg capacity : 3 x 400V, 50Hz

Condition: used, loading : max. 2.800 kg (depending on the product) all stainless steel vacuum pump not included suitable for cooling PLC control Hodpfx Asyx Tl Djb Iek adjustable speed tilting system to discharge 1 water filter dimensions (l x w x h) : ± 3.490 x 1.820 x 2.250 mm power: 5,9 kW

Condition: used, all stainless steel belt width 600 mm mobile Hjdpfxeyx Tlqo Ab Isk adjustable speed adjustable working height with air knife outside dimensions (l x w x h) : ± 3.400 x 1.300 x 1.900 mm

Condition: used, cooking length 4.000 mm belt width 600 mm all stainless steel with electrical hoist steam heated (steam generator not included) Hedpfx Aoyx Tlkeb Iok temperature distribution in 2 zones dimensions (l x w x h) : ± 5.000 x 1.550 x 2.200 mm adjustable speed

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Hodpfxoyx Na Re Ab Iek

Condition: used, Year of construction: 2023, Overview  This pallet labeller was manufactured in 2023 by LOGOPAK. The machine is designed for applying self-adhesive labels on pallets. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The machine is available immediately and can be visited on request. Maintenance was carried out twice per year; . Technical data  Capacity: max. 100 pallets/hour Application: Pallet labelling (self-adhesive)     Hodpfxoyx I A Dj Ab Isk

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) Formats: 250 ml – 1000 ml Application: Hot-fill and cold-fill beverage production Container types: Glass bottles and PET bottles (hot-fill) Filling temperature: 10°C – 104°C CO₂ capability: Yes Closures: Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off PET: 38 mm 3-start hot-fill closure Labelling: Cold glue paper labels (optional sleeve labelling available) Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones Bottle dryer | Europool | - | 2007 | High-speed air dryer Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt Conveyors | KHS / Krones | - | - | Complete conveying system Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial Pallet labeller | Logopack | - | - | Pallet labelling system Reverse osmosis system | MWT | - | - | Capacity 800 l/h Hsdpfx Aeyx I Awjb Iok

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Hedpfxjwcwbqs Ab Ijk

Condition: good (used), Compact GEA Eurotek spiral freezer for sale. Refurbished in 2021. 16 tiers, 130mm pitch, 110mm max product clearance. 500mm wide belt with 450mm useable belt width. North South configuration. Can be seen 'in situ' through November. Being removed 5th December. Hjdpju Iw H Nefx Ab Iek