Used Romania for sale (251)

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and Ljdsu Nad Tspfx Affsta capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: used, Electric motor, three-phase motor Lsdpfx Afspu Itfsfota -Manufacturer: EP Romania, electric motor type MA24F165S-2 -Power: 1.5 kW -Speed: 2855 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP44 -Dimensions: 295/200/H220 mm -Weight: 18 kg

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Ltodocrd Nmjpfx Affsa Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Max. ram stroke: 800 mm Number of strokes per minute: 110 Lodpfxstgpdze Affsta Total weight: 35 ton Anvil weight: 24 ton

Condition: ready for operation (used), Year of construction: 1984, Romanian Hot Former AMP 20 line Press Capacity : 220 tons, Ltedpotaui Usfx Affea Forming section : 3, Forming load: 90 ToF, Bar Diameter: 14 to 25 mm, Part Outer Diameter, Max.: 35 mm, Cut-Off Length: 15 to 40 mm, Ram Stroke: 110 mm, Ejector Stroke: 55 mm, Die Center Distance: 110 mm, Production Per Minute: 12 to 180 , Weight: 11 tons, Technical documentation: yes Movie underpower available

Condition: excellent (used), Year of construction: 1981, overall weight: 64,000 kg, Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Ltsdpfx Aelnk Tysffoa Max. ram stroke: 950 mm Number of strokes per minute: 100 Total weight: 64 ton Anvil weight: 47 ton

Condition: ready for operation (used), Romanian Lathe SN 1800x3000 Manufacturer Uppetrom 1 MAY Chuck diameter 1800 mm Max swing over bed 1800 mm Ledpfxsv Uaufj Affeta Length between centers 3000 mm Max swing over slide 1450 mm Max weight of work piece between centers 25,000 kg Movie with machine underpower available

Condition: excellent (used), Year of construction: 1982, total height: 5,600 mm, pressing force: 400 t, air pressure: 6 bar, distance between side stands: 650 mm, distance between stands: 1,600 mm, stroke length: 280 mm, table length: 1,600 mm, table width: 1,120 mm, Trimming press in working condition: Nominal force: 400 ton Stroke: 280 mm Number of strokes per minute: 36 1/min Table size: 1 600 x 1 120 mm Ltodpfx Ajubyrxoffea Slide size: 1 435 x 960 mm Main electric motor: 37 kW Overall dimensions: - Length: 3 010 mm - Width: 2 135 mm - Height: 5 600 mm Total weight: 50 000 kg.

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Stroke 500mm, 320mm and 200mm Ltedpfx Afetz S Hcefja

Condition: ready for operation (used), VTL SC 14 cc Chuck diameter 1200 mm Max turning 1400 mm Max height of workpiece 1000 mm Lsdpfx Afog D Hv Isfeta Aprox weight 16.1. to

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 90 mm Clamping Unit Clamping force 5000 kN Ledpsx Nr Uxjfx Affjta This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. Application Types Injection Moulding

Condition: new, Year of construction: 2025, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. Ltodpfx Ajgmhxasffea By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment CHRISTMAS DISCOUNT

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, General Data Machine weight 8700 kg Measurements height 2095 mm Lsdpfx Afjx Nr Husfeta Dimensions Machine Length 5155 mm Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 1600 kN This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 37,235 h, General Data Machine weight 5300 kg Measurements height 1932 mm Dimensions Machine Length 3974 mm Injection Unit Screw diameter 35 mm Ltedpfxex Nr Hzj Affoa Clamping Unit Clamping force 800 kN This Engel Victory 330/80 Tech was manufactured in 2015. It features a clamping force of 800 kN, a screw diameter of 35 mm, and a maximum injection volume of 154 cm³. The machine dimensions are 3974 x 1437 x 1932 mm, weighing 5300 kg. Currently in production with excellent condition and 37,235 operating hours. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 330/80 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,013 h, General Data Machine weight 12200 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Injection Unit Screw diameter 50 mm Clamping Unit Ltodpfex Nr Rmex Affoa Clamping force 1800 kN This Engel VICTORY 750/180 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 1,800 kN and a screw diameter of 50 mm, it supports a maximum injection volume of 393 cm³. Currently in production and in excellent condition, this machine also includes a robot interface EUROMAP 67. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 105 mm Clamping Unit Clamping force 6500 kN This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Ltsdpex Nr R Hsfx Affoa Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, General Data Ltedpfox Nr H Isx Affoa Machine weight 20000 kg Measurements height 2230 mm Dimensions Machine Length 8840 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 5500 kN This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, General Data Machine weight 11000 kg Ledpfx Afsx Nr Ryjfsta Measurements height 2360 mm Dimensions Machine Length 7420 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 4000 kN This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,164 h, General Data Machine weight 19400 kg Measurements height 2300 mm Ltedpjx Nr Rtjfx Affoa Dimensions Machine Length 5861 mm Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 2600 kN This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 27,137 h, General Data Machine weight 2900 kg Measurements height 1780 mm Dimensions Machine Length 3179 mm Injection Unit Screw diameter 25 mm Clamping Unit Ltodpfsx Nkn Dsx Affja Clamping force 400 kN This Engel VICTORY 200/40 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 40 tons and a screw diameter of 25 mm, it supports a maximum injection volume of 69 cm³. The machine includes a robot interface (Euromap 67) and is still in production, showcasing its reliability and excellent condition. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 31,732 h, General Data Machine weight 12000 kg Measurements height 2160 mm Clamping Unit Clamping force 2300 kN Injection Unit Screw diameter 55 mm Dimensions Machine Length 5871 mm This HAITIAN ZE2300 was manufactured in 2019. It features a clamping force of 2300 kN, a platen opening stroke of 1150 mm, and a screw diameter of 55 mm. Equipped with a robot and Euromap 67 interface, it remains in excellent condition and is still in production. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN ZE2300 machine we have for sale. Contact us for more information. Ledox Nkphspfx Affsta Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 34,573 h, General Data Machine weight 2200 kg Measurements height 2240 mm Dimensions Machine Length 7200 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 4500 kN Lodpfx Afsx Nkn Refeta This HAITIAN JU4500II was manufactured in 2019. It features a clamping force of 4,500 kN, a maximum injection volume of 1,239 cm³, and a screw diameter of 80 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN JU4500II machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, operating hours: 23,125 h, General Data Machine weight 22000 kg Measurements height 2160 mm Dimensions Machine Length 5871 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 4500 kN Ltsdpfxsx Nkpbe Affea This HAITIAN JU5500III was manufactured in 2021. A hydraulic injection moulding machine with a clamping force of 4,500 kN and a maximum injection volume of 1,239 cm³. Features a screw diameter of 80 mm and an opening stroke of 1,250 mm. Equipped with a robot interface, Euromap 67, and still in production. Consider the opportunity to buy this HAITIAN JU5500III hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,270 h, General Data Machine weight 9300 kg Measurements height 2160 mm Dimensions Machine Length 5871 mm Ltedpfjx Nkpnsx Affsa Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 1900 kN This HAITIAN ZE1900 was manufactured in 2019. It features a clamping force of 1900 kN, a maximum injection volume of 412 cm³, and a screw diameter of 50 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the HAITIAN ZE1900 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2020, Injection Unit Shot weight 172 g Screw diameter 70 mm Clamping Unit Clamping force 2200 kN Ltodjx Nkp Ijpfx Affoa This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding