Used eccentric presses single column over 100t for sale (131)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 100/2/173/02, throat depth: 330 mm, table length: 950 mm, stroke adjustment: 10 mm, total width: 660 mm, pressing force: 100 t, stroke length: 130 mm, punching force: 100 t, Used 100ton mechanical power press for sale complete with sheet metal feed system Video at the bottom of the listing MODEL 100 CNR 4 SERIAL N° 100/2/173/02 NOMINAL FORCE (Max stroke) 1000 [ KN] MACHINE WEIGHT 7000 [ daN] NOMINAL SPEED 65 [C/min ] VARIABLE SPEED MIN/MAX 30/90 [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 22 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 ( bar ] MAXIMUM STOPPING TIME 0,195 [s] SAFETY DISTANCE 312 [ mm] FLYWHEEL ENERGY 8493 [KJ ] STROKE LENGTH MIN/MAX 10 / 130 (mm ) Hfedjxqn Twepfx Ag Der RAM ADJUSTMENT 100 [mm ] SHUT HEIGHT S.D.A.U. 370 [ mm ] MAXIMUM EJECTOR STROKE 55 [ mm ) TABLE SIZE 68 / 660 / 950 [mm ) RAM SIZE 450 / 540 ( mm) TOOL SPIGOT DIA 60 THROAT DEPTH 330 [mm / MAX TOOL SIZE 450 / 540 ( mm] MAX TOP TOOL WEIGHT 180 ( daN]

Condition: refurbished (used), Year of construction: 1999, TECHNICAL FEATURES: Press Model: T50 CNR4 Year of construction: 1999 Rated force: kN 500 Mass: kg. 3.500 Strokes per minute: No. 90 Max. insertions per minute: No. 41 Min./max. operating air pressure: BAR 4÷5.5 Stopping time: s 0.117 Safety distance: mm 187 Energy: KJ 2000 Min./max. adjustable stroke: mm 8÷100 Mace adjustment: mm 70 Hsdpfx Agsqbtc Nj Djfr P.M.I high adjustment: mm.280 Maximum extraction stroke: mm. 30 Work surface area: mm 770x530x58 Mace plane size: mm. 450x300 Shank diameter: mm. 45 Overhang from the center: mm 270 Max. mold size: mm 450x300 Upper mold mass: kg 84 Voltage: V 400 Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts NEW COMPONENTS INSTALLED: - Engine bearings; - Flywheel bearings; - Engine belts; - Clutch plates; - Front accident guards; - Work surface brightened on CNC machine; - Foot pedals.

Condition: new, Year of construction: 2025, throat depth: 320 mm, table width: 920 mm, table length: 660 mm, pressing force: 160 t, ram bore: 55 mm, power: 15 kW (20.39 HP), punching force: 160 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction frame • 4-sided supported guideways • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Automatically adjustable stroke (for 150–300 ton models) • Light curtain safety barrier • PLC control system • Touchscreen LCD display (for 150–300 ton models) • Dual hand pedal control system • Mechanical safety lock system • Hydraulic safety system (for 200–300 ton models) • Emergency reverse motor operation • Compliant with occupational safety regulations • Vibration damping pads • CE certification • Country of origin: Turkey • Warranty period: 24 months TECHNICAL SPECIFICATIONS: Hedpfsvtywdsx Ag Defr Type: C-type monoblock frame Capacity: 160 tons Throat depth: 320 mm Distance table to ram: 500 mm Distance between slide and table: 540 mm Distance between walls: 500 mm Ram adjustment: 120 mm Approximate press width: 1,600 mm Approximate press depth: 2,280 mm Approximate press height: 2,750 mm Front anchoring dimension: 840 mm Side anchoring dimension: 1,300 mm Diameter of table hole: 220 mm Table size: 660 / 920 mm Die fixture slot diameter: 55 mm Ram size: 600 / 290 mm Table height from floor: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1,450 rpm Approximate weight: 7,100 kg • As the manufacturer, we can modify technical specifications upon request.

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 2242, table width: 300 mm, table length: 1,000 mm, Surface grinding machine type SPD-30b for metal. Max. grinding area – 300 x 1000 mm; power supply – 18 [kW] Hodoxrluhjpfx Ag Dofr

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm Hfjdoxq Rz Rjpfx Ag Dor - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm Hedpfx Agsuqdwxo Dofr HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Year of construction: 1966, condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets pressure 1500 kN (150 tons) Hfedpsir I Slofx Ag Dor stroke 60 mm ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Tech. Data and dimensions: Errors excepted.

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm Hodpsdzqddofx Ag Dsfr table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, pressing force: 300 t, stroke length: 200 mm, power: 30 kW (40.79 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction frame,  Stress relief for the frame and welded parts by vibration,  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards,  Pneumatic clutch and brake combination – OMPI-Italy,  Slide ram supported on 8 guides,  Ram, connecting rod, and slide are made from GS52 steel casting,  High strength one-piece crankshaft – 4140,  With spare table,  Table-to-ram adjustment with ratchet device,  Automatic central lubrication,  Hydraulic overload protection,  Pneumatic pedal with locking mechanism and time-adjusted dual-hand control,  Electric counter,  PLC application and touch screen – DELTA, Hfsdpfexrk Hvex Ag Dsr  Electrical switchgear – SIEMENS-SCHNEIDER,  Double-solenoid safety valve – GPA, TOPAIR,  CE compliance,  Finger protection light barriers – SICK, LEUZE, KEYENCE,  Safety PLC (controls all electrical systems, valves, dual-hand and pedal controls) – PILZ,  Position switch with lock and control panel,  Safety block,  Protective guards within CE standards. TYPE A TYPE MONOBLOCK FRAME Capacity 300 Ton Throat Depth 370 mm Table-to-Ram Distance 530 mm Ram-to-Table Max Distance 650 mm Distance Between Walls 600 mm Ram Adjustment 150 mm Approx. Press Width 1300 mm Approx. Press Depth 2700 mm Approx. Press Height 3200 mm Front Anchor Dimension 1000 mm Side Anchor Dimension 1440 mm Table Bore Diameter 260 mm Table Size 700 x 1200 mm Die Clamping Slot Diameter 60 mm Ram Size 780 x 400 mm Floor-to-Table Height 810 mm Stroke Adjustment 20 – 200 mm Strokes per Minute 38 spm Motor Power 30 + 2.2 kW Motor Speed 1450 rpm Approximate Weight 15,000 kg

Condition: used, Year of construction: 1989, pressure 150 t throat 310 mm stroke 30-120 mm no. of strokes 20-60 Hub/min ram - range of adjustment 90 mm table surface area 820x600 mm ram surface 550x430 mm hole in the table 330x200 mm table height 750 mm Hfjdpfx Aoxh Sw Usg Dsr tool hole in ram Ø50 mm weight of the machine ca. 9,5 t dimensions of the machine ca. BxTxH 2500x2500x3000 mm

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Hedpfx Aget Ei Hnj Defr Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: new, pressure 30 t Hsdpfx Agsxabvkj Dofr throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min engine: 380 V, 5,5 kW Hfedpfoddhw Sox Ag Djr space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Condition: good (used), Year of construction: 1977, Offer 25021 Technical data approx.: - Pressure force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Hole in the table approx. 320 mm - Ram surface approx. 800 x 475 mm - Tenon hole in the ram mm - Ram adjustability 110 mm - Stroke adjustment 30 - 140 mm Hfjdpfx Agjvmx N Es Dsr - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

Condition: new, Year of construction: 2026, throat depth: 350 mm, table width: 700 mm, table length: 1,100 mm, pressing force: 250 t, stroke length: 160 mm, power: 22 kW (29.91 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body,  Stress relief of the body and welded components by vibration,  Parallelism and perpendicularity tolerances between tables compliant with ISO and DIN standards,  Pneumatic clutch and brake combination – OMPI-Italy,  Ram supported by 8 guides,  Components such as ram, connecting rod, and slide, made of cast steel GS52,  High-strength, solid crankshaft – 4140,  Equipped with spare bolster plate,  Ratchet-type bed-ram adjustment mechanism,  Automatic central lubrication system,  Hydraulic overload protection,  Pneumatic pedal with locking and time-controlled two-hand operation,  Electrical counter included,  PLC application and touchscreen – DELTA,  Electrical switchgear components – SIEMENS-SCHNEIDER,  Double-coil safety valve – GPA, TOPAIR,  CE compliance,  Light curtain guards for finger protection – SICK, LEUZE, KEYENCE,  Safety PLC (controls the entire electrical system, valves, two-hand and pedal operations) – PILZ,  Locked position switch and electric panel,  Safety block,  Protective guards in accordance with CE regulation. TYPE: A TYPE MONOBLOCK FRAME Capacity: 250 Tons Throat Depth: 350 mm Bed-to-Ram Distance: 520 mm Slide-to-Table Distance: 630 mm Hfsdjxrkz Tjpfx Ag Der Distance Between Walls: 640 mm Ram Adjustment: 150 mm Approx. Press Width: 1300 mm Approx. Press Depth: 2500 mm Approx. Press Height: 3200 mm Front Anchorage Measurement: 980 mm Side Anchorage Measurement: 1430 mm Table Bore Diameter: 250 mm Table Size: 700 / 1100 mm Die Clamp Slot Diameter: 60 mm Ram Size: 670 / 380 mm Floor-to-Table Height: 810 mm Stroke Adjustment: 20 / 160 mm Strokes per Minute: 40 spm Motor Power: 22 + 2.2 kW Motor Speed: 1450 RPM Approximate Weight: 113,500 kg

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm Hjdpfjxh Swhox Ag Defr ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: good (used), Year of construction: 1983, Rotary indexing table with 12 stations Automatic ejector Three pressing stages pressure capacity 1.000 KN stroke 12-120 mm Hfedpfx Aslp Nqhsg Dor Stroke rate 30-60 1/min ram adjustment 80 mm total weight 9.500 kg

Condition: new, pressure 20 t throat 200 mm stroke 0 - 50 mm table: 360 x 550 mm table: 140 mm - Bohrung no. of strokes 160 Hub/min Hodpfx Agjxabrrj Dsfr bore 35,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW weight 1.250 kg range L-W-H 1310 x 1250 x 1860 mm

Year of construction: 1983, condition: used, machine/vehicle number: 535350, Lg-Nr. 05466, - Compressive force 100 t - Throat 320 mm - Width in the column below the guide 400 mm - table size approx. 850 x 610 mm - drop-through hole in the table 335 / 300 mm - thickness of the table clamping plate 90 mm - overall installation height approx. 300 mm - surface of the chair 600 x 335 mm - height adjustment of the chair 80 mm - stroke adjustment 10 - 130 mm - ejector stroke in the chair 32 mm - Stroke rate continuous operation approx. 56 /min - Drive 380 V / 11 kW - space requirement approx. W 1900 x H 2800 x D 2200 mm - weight approx. 9000 kg - with : - UVV press safety control unit PREVENTA - Hydr. + pneumatically operated clutch - LUTEX additional brake system Hfjdpfx Ago E A Tme Dsr - central lubrication

Condition: new, Year of construction: 2026, throat depth: 340 mm, table width: 680 mm, table length: 1,000 mm, pressing force: 200 t, stroke length: 140 mm, power: 18.5 kW (25.15 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body  Stress relief of body and welded parts by vibration  Parallelism and perpendicularity tolerance between tables according to ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 8 slideways  Ram, connecting rod, and parts such as slide block made of steel casting, GS52  High-strength monobloc crankshaft – 4140  With spare bolster  Table-to-ram adjustment with ratchet device  Automatic central lubrication  Hydraulic overload protection  Pneumatic pedal with latch and dual-hand control with timer  Electric counter  PLC system and touch panel – DELTA  Electrical switchgear – SIEMENS-SCHNEIDER Hedpfxoxrkzte Ag Defr  Dual-coil safety valve – GPA, TOPAIR  CE compliant  Light curtain finger protection barriers – SICK, LEUZE, KEYENCE  Safety PLC (Controls all electrical systems, valve, dual-hand and pedal controls) – PILZ  Lockable position switches and control panel  Safety block  Protective guards included as per CE regulations TYPE: A TYPE MONOBLOC BODY Capacity: 200 Tons Throat Depth: 340 mm Table–Ram Distance: 500 mm Slide–Table Distance: 600 mm Distance Between Side Walls: 620 mm Ram Adjustment: 130 mm Approx. Press Width: 1200 mm Approx. Press Depth: 2400 mm Approx. Press Height: 3100 mm Front Anchorage Dimension: 970 mm Side Anchorage Dimension: 1420 mm Bolster Hole Diameter: 240 mm Bolster Size: 680 / 1000 mm Die Mounting Slot Diameter: 60 mm Ram Size: 620 / 350 mm Floor to Table Height: 805 mm Stroke Adjustment: 20 / 140 mm Strokes per Minute: 50 spm Motor Power: 18.5 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 11,500 kg

Condition: new, pressure 10 t throat 160 mm stroke 0 - 40 mm table: 270 x 370 mm table: 100 mm - Bohrung no. of strokes 200 Hub/min bore 25,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 180 mm total power requirement 0,75 kW Hedpfxexaad Hs Ag Djfr weight 590 kg range L-W-H 1.168 x 1.010 x 1.670 mm

Condition: new, Year of construction: 2026, throat depth: 320 mm, table width: 660 mm, table length: 920 mm, pressing force: 150 t, stroke length: 125 mm, power: 15 kW (20.39 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body,  Stress relief for the body and welded parts via vibration,  Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Slide guided by 8 bearings  Components such as ram, connecting rod, and ram nose made of cast steel, GS52  High-strength monoblock crankshaft – 4140  Equipped with spare table,  Ratchet device table-to-ram adjustment  Automatic central lubrication system,  Hydraulic overload protection  Pneumatic pedal with latch and dual-hand control with timer,  Electric counter,  PLC system and touchscreen – DELTA  Electric switchgear components – SIEMENS-SCHNEIDER  Double-solenoid safety valve – GPA, TOPAIR  CE compliance  Finger safety light curtains – SICK, LEUZE, KEYENCE  Safety PLC (controls all electrical systems, valves, dual-hand and pedal controls) – PILZ  Locked position switch and control panel,  Safety block,  Protective guards in compliance with CE regulations. TYPE A TYPE MONOBLOCK BODY Capacity 150 Ton Throat Depth 320 mm Table-to-Ram Distance 500 mm Slide-to-Table Distance 540 mm Hsdexrkvqopfx Ag Defr Distance Between Side Frames 600 mm Ram Adjustment 120 mm Approx. Press Width 1100 mm Approx. Press Depth 2280 mm Approx. Press Height 2900 mm Front Anchorage Size 890 mm Side Anchorage Size 1300 mm Table Bore Diameter 220 mm Table Dimensions 660 / 920 mm Die Mounting Slot Diameter 55 mm Ram Dimensions 600 / 290 mm Floor-to-Table Height 805 mm Stroke Adjustment 10-125 mm Strokes per Minute 50 s.p.m. Motor Power 15 kW Motor Speed 1450 RPM Approximate Weight 9,500 kg

Condition: new, Year of construction: 2025, throat depth: 310 mm, table width: 630 mm, table length: 820 mm, pressing force: 125 t, stroke length: 125 mm, power: 11 kW (14.96 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body  Stress relief of the body and welded components by vibration  Table parallelism and squareness tolerance in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram guided on 8 slides  Components such as ram, connecting rod, and ram adapter (die holder) are made of cast steel GS52  High-strength monoblock crankshaft – 4140  With spare bolster plate  Ram adjustment with ratchet mechanism  Automatic central lubrication system  Hydraulic overload protection  Pneumatic foot pedal with interlock and dual-hand control with timer  Electric counter  PLC system with touchscreen – DELTA  Electrical switchgear components – SIEMENS-SCHNEIDER  Dual-coil safety valve – GPA, TOPAIR  CE conformity  Light curtain finger protection barriers – SICK, LEUZE, KEYENCE  Safety PLC (controls the entire electrical system, valve, dual-hand control, and pedal) – PILZ  Position interlock switch and control panel  Safety block  Protective guards in compliance with CE standards TYPE: A TYPE MONOBLOCK BODY Capacity: 125 Ton Throat Depth: 310 mm Table-to-Ram Distance: 500 mm Slide-to-Table Distance: 510 mm Distance Between Walls: 540 mm Ram Adjustment: 100 mm Press Width: 1100 mm Press Depth: 2200 mm Press Height: 2700 mm Front Anchoring Dimension: 840 mm Side Anchoring Dimension: 1250 mm Table Hole Diameter: 210 mm Hjdpoxrkt Nsfx Ag Dsfr Table Size: 630 / 820 mm Die Clamping Slot Diameter: 55 mm Ram Size: 500 / 250 mm Table Height from Floor: 785 mm Stroke Adjustment: 10 / 125 mm Strokes per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 RPM Weight: 7,800 kg

Condition: new, Year of construction: 2026, throat depth: 300 mm, table width: 600 mm, table length: 780 mm, pressing force: 100 t, power: 11 kW (14.96 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body,  Stress relief by vibration will be applied to the body and welded components.  Table-to-table parallelism and perpendicularity tolerances according to ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram guided by 8 sliding guides  Components such as ram, connecting rod, and slide block made of cast steel, GS52  High strength one-piece crankshaft – 4140  Equipped with spare table  Table-ram adjustment with ratchet device  Automatic central lubrication  Hydraulic overload protection  Pneumatic pedal with latch and time-controlled dual hand control  Electric counter  PLC system and touch screen – DELTA  Electrical switchgear – SIEMENS-SCHNEIDER  Double solenoid safety valve – GPA, TOPAIR Hfjdpoxrktiefx Ag Dor  CE compliance  Finger guard light curtains – SICK, LEUZE, KEYENCE  Safety PLC (controls the entire electrical system, valves, dual-hand and pedal) – PILZ  Position switch with lock and control panel  Safety block  Protective enclosures within CE scope. TYPE: MONOBLOCK BODY, TYPE A Capacity: 100 tons Throat Depth: 300 mm Table-to-Ram Distance: 450 mm Distance Between Slide and Table: 465 mm Distance Between Side Walls: 500 mm Ram Adjustment: 85 mm Approx. Press Width: 1000 mm Approx. Press Depth: 1900 mm Approx. Press Height: 2500 mm Front Anchor Size: 760 mm Side Anchor Size: 1135 mm Table Hole Diameter: 200 mm Table Dimensions: 600 / 780 mm Die Clamping Slot Diameter: 50 mm Ram Size: 405 / 240 mm Floor-to-Table Height: 775 mm Stroke Adjustment: 10 / 110 mm Strokes Per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 RPM Approximate Weight: 5,700 kg

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 800 mm, table length: 1,100 mm, stroke adjustment: 180 mm, pressing force: 200 t, ram bore: 60 mm, power: 15 kW (20.39 HP), punching force: 200 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION Hjdpfx Agsvtyx Is Dsfr • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 200 AUTOMATIC STROKE ADJUSTMENT RANGE (MM) 20-180 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 45 RAM - REGULATION RANGE (MM) 90 RAM - TABLE DISTANCE (MM) 600 LOWER TABLE DIMENSIONS (MM) 800X1100 LOWER TABLE HOLE DIAMETER (MM) 220 RAM TABLE DIMENSIONS (MM) 425X650 RAM MOLD EYEBALL DIMENSIONS (MM) 60 MOTOR POWER (KW) 15 WEIGHT (KG) 9100 MACHINE DIMENSIONS (MM) (H - W - L ) • MANUFACTURER TECHNICAL SPECIFICATIONS MAY CHANGE IF REQUIRED.