Used Moving Column Machining Center for sale (69,578)

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Bodpfx Asy Ed D Rja Dedb Year of construction: 2007 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor Bedpfoy Aw Rxjx Aa Djdb

Condition: good (used), TECHNICAL DATA • CNC: Heidenhain TNC 430 • Table surface: 7,100 x 1,200 mm • Longitudinal travel (X axis): 7,000 mm • Cross travel (Y axis): 1,500 mm • Vertical travel (Z axis): 1,500 + 500 mm • Rapid traverse (axes): 20,000 mm/min • Maximum working feed rate: 10,000 mm/min • Automatic head with 1° x 1° indexing: Included • Spindle taper: SK-50 • Speed range: 20 - 3,500 rpm • Number of speed ranges: 2 • Main motor power: 50 kW • Automatic tool changer: Included • Number of tool positions: 60 • Internal coolant supply: Included • Chip conveyor: Included • Electronic handwheel: Included • Additional paper filter tank: Included • Operator platform: Included Bdedpfxjxqq Rre Aa Deb • Guarding with 4 sliding doors: Included • Admissible table load: 30,000 kg • Machine weight: 45,000 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Bjdpfx Aeyuzg Hoa Dedb Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, position of the milling head: Testa ad assi ortogonali indexati - TTL2 25 360, spindle diameter: 180 mm, travel distance W-axis: 1,000 mm, table load: 100,000 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, table length: 3,000 mm, table width: 3,500 mm, quill travel distance: 2,500 mm, quill diameter: 180 mm, spindle stroke: 1,000 mm, workpiece weight (max.): 100,000 kg, torque: 9,050 Nm, CNC BORING MACHINE PAMA mod. SPEEDRAM 2000 Hydrostatic CNC Control: Siemens Sinumerik 840D Axis X: 13,000 mm Axis Y: 5,000 mm Axis Z: 1,200 mm Axis W: 1,000 mm Total axial travel (Z+W): 2,200 mm Working feed on all axes: 8,000 mm/min Rapid traverse on all axes: 20,000 mm/min Spindle: Boring spindle diameter: 180 mm Spindle carrier ram dimensions: 400 x 440 mm Spindle speed (3 ranges) max: 2,500 rpm Spindle power (S1): 91 kW Spindle nominal torque (S1): 9,050 Nm Spindle internal taper: ISO 50 DIN 69871 AD-Type Big Plus Orthogonal axis indexed head – TTL2 25 360 Tool taper: ISO 50 DIN 69871/2 AD-Type Big Plus Max spindle power: 25 kW Max spindle speed: 2,500 rpm Speed ratio: 1:1 Spindle indexing: +/- 100°, 200 positions per 1° Head indexing: +/-180°, 360 positions per 1° Max spindle nominal torque: 1,000 Nm Bjdpfxoyxg Hbo Aa Dsdb TH 100 rotary-travelling table: Table dimensions: 3,000 x 3,500 mm Table load capacity: 100 Ton Central T-slot size: 36h7 mm Lateral T-slot size: 36h12 mm T-slot pitch: 320 mm Longitudinal travel V-axis: 2,500 mm Feed/rapid traverse V-axis: 10,000 mm/min Chain-type tool magazine with 80 tools (capacity CU 145 R80) Machine weight approx. 160/165 Ton Complete with: - Hinged belt chip conveyor - No. 02 side chip conveyors for rotary table - Fixed closed accessory magazine with 2+1 positions - Fixed tool rack (ISO50, 6 positions) - Internal and external tool coolant system, 30 bar - Wireless workpiece probe (Renishaw) USED MACHINE YEAR: 2009

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,000 mm, travel distance W-axis: 1,200 mm, MAKE: PAMA MODEL: SPEEDRAM 4 CATEGORY: Floor Type CNC Boring Mill YEAR OF MANUFACTURE: 1999 CNC CONTROL: Siemens Sinumerik 840C Spindle Internal Boring Spindle Taper: ISO 50 Boring Spindle Diameter: Ø 180 mm Spindle Speed Range: 2 – 1,600 rpm Spindle Motor Power: 100 kW Machine equipped with through-spindle coolant Working Capacity X Axis (Column Longitudinal Travel): 13,000 mm Y Axis (Head Vertical Travel): 5,000 mm Z Axis (Ram Cross Travel): 1,000 mm W Axis (Quill Stroke): 1,200 mm V Axis (Table Cross Travel): 3,000 mm Ram Section Dimensions: 440 x 500 mm Machine equipped with Heidenhain linear scales on all axes Table & Floor Plates Rotary Table Dimensions: 4,000 x 4,000 mm Rotary Table Load Capacity: 80 tons Rotary Table Continuous Rotation: 360,000 positions, minimum angle 0.001° Bjdeyari Aopfx Aa Dsdb Number of Floor Plates: 2 Each Floor Plate Dimensions: 7,100 x 2,400 mm Total Floor Plate Area: 7,100 x 4,800 mm Accessories Chip conveyor Coolant tank with high-pressure pump for through-spindle coolant (CTS) 1 x 90° milling head, indexing every 2.5° (C axis) Spindle oil chiller and hydraulic unit Operation manuals and electrical schematics

Year of construction: 2005, condition: ready for operation (used), X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024. Bdjdpfxjpvk Ahj Aa Dob

Condition: good (used), Year of construction: 1994, KEKEISEN Universal moving column milling machine UFF 6000/15, YOP 1994, machine-no. F37642, well maintained, good condition 2-axis automatic universal milling head with autom. positioning in 1°-positions tool holder SK50 according to DIN 69871/872 form B Longitudinal travel of the column (X-axis) 6000 mm Vertical travel of the headstock (Z-axis) 1500 mm Transverse travel of the headstock (Y-axis) 1200 mm Table size 6200 x 840 mm, table load 8000 kg Bsdpfx Aaenuda Ao Djdb Table surface with T-slots 22 mm, spacing 140 mm Spindle speed 20 - 2000 rpm (infinitely variable in 2 ranges) Axis speeds 4 m/min or 10 m/min (rapid traverse) CNC control Heidenhain TNC 415 with electr. handwheel HR130 Complete 2nd user interface on the operator's platform that travels with the machine 3D touch probe m&h radio-controlled Tool changer 40 places max. Ø 250 mm, max. 400 mm long Coolant unit (also IKZ, max. 10bar) with 800 l tank + drum filter cladding of the machine table, with chip conveyor between bed and table without fixators, without installation and commissioning Connection data 400 V; 50 Hz; approx. 57 kVA Price: on request, plus VAT Pricing: ex works, delivery time: short term by agreement

Condition: good (used), Year of construction: 2010, functionality: fully functional, X 3,200mm, Y 2,100mm, Z 920mm, ATC 40 pos, BT50 10,000Rpm. Bdedpfxjyglbxs Aa Dsb weight ca 35.000kg, delivery April 2026

Year of construction: 1999, condition: good (used), used moving column bed milling machine > make Kekeisen > type 1200/8 > year99 > With Heidenhain TNC 426 > > Spindle mounting SK40 > With 30-fold tool changer > Speed 20-7300 rpm > Rapid traverse 0-30 m/min > travels > X 1200 mm > Y 500 mm > Z 800 mm > Milling head automatically swivels in vertical > and horizontal position Bdedpfxom Twc Ts Aa Dob > Drive power 28 kw > Weight 12 to

Year of construction: 1997, condition: used, Technical Data Spindle taper ISO 50 DIN 69871 Longitudinal stroke 3000 mm Slide stroke 1000 mm Transversal stroke 1000 mm Vertical stroke 1500 mm Table size 3500x920 mm Bsdpsg Amzkjfx Aa Dedb Spindle speed 4000 rpm Spindle power KW. 27,5 Non binding data to be verified / Data must be verified Standard equipment CNC SELCA 3045 AUTOM.BI-ROTARY HEAD (A-AXIS 1° - B-AXIS 1°) 30 POS. HORIZONTAL AND VERTICAL TOOL CHANGER SWARF EVACUATION

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 0112, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 9,000 rpm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! Bdedpsw Hrh Hofx Aa Dob TECHNICAL DETAILS Travel distances Travel X: 1,500 mm Travel Y: 3,500 mm Travel Z: 1,000 mm Worktable dimensions: 4,500 x 1,600 mm Spindle and Tooling Max. spindle speed: 9,000 rpm Swivel range of angular head (B-axis): ±90° Tool holder: SK 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 5,000 x 3,700 mm Weight: 32,000 kg EQUIPMENT 2 ALMATIC machine vices Various clamping devices for the machine Technical documentation

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW Bsdpfx Ajxpudtja Dsdb - Max. torque: 6,500 Nm

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min Bodpsxxwy Asfx Aa Dodb VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Feed rate: 10 – 2,000 mm/min Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: excellent (used), Year of construction: 1999, Moving column milling machine in excellent condition. Disassembled machine visible at our headquarters. Bedpfjlfcdqjx Aa Dedb

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm Bdsdpfexc I Dgjx Aa Deb

Condition: ready for operation (used), Year of construction: 2013, operating hours: 13,672 h, functionality: fully functional, machine/vehicle number: 1237361A51A, travel distance X-axis: 610 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: Fanuc 0-MD, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 610 mm Travel Y-axis: 430 mm Travel Z-axis: 570 mm Table length: 650 mm Table width: 450 mm Tool holder: BT40 Main spindle power: 15 kW Max. spindle speed: 10,000 rpm Number of axes: 3 MACHINE DETAILS Control: Fanuc 0-MD Tool magazine: 24 positions Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,200 x 2,450 mm Net weight: 9,000 kg Shipping units: 2 Operating hours: 13,672 h Power consumption: 11 kW Bedpfx Ajy Avucja Dsdb EQUIPMENT External cooling system Chip conveyor Pallet milling machine Spindle cooling Changeover table Tool magazine Note: The robot shown in the video is not included in the scope of delivery or sale.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table size: 500 mm x 500 mm MACHINE DETAILS Bdsdpfx Aasy Atwue Dsb CNC control: Fanuc G-Tech 16i Tool magazine: 120 stations Internal coolant: 70 bar EQUIPMENT 6-fold pallet changer 4th axis Knoll high-pressure system Note: The machine has already been dismantled.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M242-06206013CFA, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table width: 510 mm, table length: 760 mm, TECHNICAL DETAILS Travel X-Axis: 610 mm Travel Y-Axis: 508 mm Travel Z-Axis: 610 mm Spindle Nose to Table: 152 - 762 mm Table Clamping Surface: 760 x 510 mm T-Slots (DIN 650): 5 x 18 H8 x 100 Table Load Capacity (evenly distributed): 1,500 kg Bsdpoy Dglnefx Aa Dodb MACHINE DETAILS AC Voltage: 400 V Phases: 3 Frequency: 50 Hz Connected Load: 18 kVA Largest Motor: 7.5 kVA

Condition: ready for operation (used), Year of construction: 2012, operating hours: 24,101 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Shopmill 3 D Formingstar, spindle speed (max.): 12,000 rpm, coolant tank capacity: 900 l, The machine is in very good used condition with no outstanding maintenance required! TECHNICAL DETAILS Bjdpey A Rzdofx Aa Dsdb Travel distance in long-operation X-axis: 1,800 mm Travel distance swivel table X-axis: 1,020 mm Travel distance rotary table X-axis: 675 mm Travel distance in pendulum operation: 675/675 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 600 mm Spindle speed: 12,000 rpm Swivel range: +10° to -100° × ±360° Feed rates X/Y/Z: 40 m/min Rotary-swivel table Rotary table size: Ø 620 × 500 mm Interference circle diameter: Ø 700 mm T-slots: 18 mm T-slot spacing: 100 mm Number of T-slots: 5 Reference keyway: 18H8 Centering bore: 30H7 × 10 mm Swivel range: +10° to -90° × ±360° Swivel speed 90°: 1.2 s Swivel accuracy: < ±10″ Rotary speed: 0–30 rpm Indexing accuracy: < ±6″ Axial runout: 0.015/Ø 300 mm Table load capacity: max. 375 kg Fixed machine table Clamping surface: 1,120 x 750 mm Max. tool weight: 10 kg Max. tool length: 330 mm Max. tool diameter: 80 mm (100 mm with adjacent pockets free) Chip-to-chip time approx.: 7.5 - 12 sec. Tool stations: 30 MACHINE DETAILS Internal coolant supply (IKZ): 40 bar Coolant tank capacity: 900 liters Tool holder: SK40 Control: Siemens 840D Shopmill 3D Formingstar Standby magazine Total positions: 190 Levels: 6 Tool length A: max. 240 mm Capacity A: 100 pcs Tool length B: max. 330 mm Capacity B: 90* pcs Tool change time: approx. 17–22 s Space required: 1,780 × 1,760 mm Height: 2,810 mm Weight: approx. 950 kg Spindle hours: 24,101 h Power-on hours: 62,438 h EQUIPMENT 3D touch probe Rotary-swivel table

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,360 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X axis: 1,016 mm Travel Y axis: 660 mm Travel Z axis: 635 mm Max. spindle speed: 12,000 rpm Spindle power: 22.4 kW Table size: 1,372 x 610 mm Max. table load: 1,360 kg Rapid traverse X axis: 30 m/min Rapid traverse Y axis: 30 m/min Rapid traverse Z axis: 30 m/min MACHINE DETAILS Control: HAAS CNC control Tool changer: 20 + 1 positions Tool holder: SK40 EQUIPMENT Documentation/manual Chip conveyor Tool changer Bdodoy A Ip Sopfx Aa Deb Coolant system Work area lighting Electronic handwheel Network / USB interface

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, table load: 500 kg, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 750 mm Distance spindle nose to table surface: 50 - 750 mm Distance spindle nose to table center: 150 - 900 mm Pallet dimensions: 500 mm x 500 mm Table load capacity: 500 kg Pallet clamping surface: 24 x M16 x D 2.0 Table indexing angle: 1° Spindle speed: 14,000 rpm Spindle taper: ISO 40 Max. spindle torque (25% duty cycle): 220.5 Nm Rapid traverse (X, Y, Z): 60 m/min Working feed rate: 30,000 mm/min Tool holder type: MAS403 BT40 Magazine capacity: 120 tools Max. tool length: 400 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1 sec Tool change time (chip-to-chip): 3.5 sec Number of pallets: 7 Type: Rotary shuttle Pallet change time: 7.5 sec Pallet rotation at loading station: 90° MACHINE DETAILS Spindle motor (30 min rating): 18.5 / 22 kW Bedpoy Edarefx Aa Djdb Axis motors (X, Y, Z, B): 7.0 / 7.0 / 7.0 / 2.7 kW Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,700 x 3,000 mm Machine weight: 15,000 kg EQUIPMENT High-pressure through-spindle coolant 35 bar Chip extraction Operating manuals CE Declaration

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, controller model: HEIDENHAIN iTNC 435, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,230 mm Y-axis travel: 1,400 mm Z-axis travel: 850 mm Table dimensions: 2,000 mm × 1,250 mm Maximum table load: 6,000 kg Spindle speed: 6,000 rpm Tool holder: SK50 Tool magazine capacity: 40 positions Bedpfxjy Dgy Ej Aa Dsdb Rapid traverse in X / Y / Z directions: 12 m/min MACHINE DETAILS Control model: HEIDENHAIN iTNC 435 Spindle drive power: 38 kW Dimensions & Weight Dimensions (L × W × H): 6,135 mm × 4,338 mm × 4,150 mm Machine weight: 22,000 kg Operating hours (machine): 72,846 h Operating hours (program run): 48,891 h Operating hours (spindle running time): 47,512 h EQUIPMENT Coolant system Internal coolant supply (IKZ) Electronic handwheel Touch probe Automatic workpiece measurement Chip flushing Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, In January 2025, a new spindle was installed! The machine has been regularly maintained! TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 800 mm Feed rates Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous duty) Vertical: 10,000 rpm Spindle speed S1 (continuous duty) Universal swivel head, 2 axes: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Electrical data Bedpfxoy Dgyfj Aa Djdb Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Current draw: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT DINO series Precision linear guides and ball screws Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Includes documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Interchangeable milling head with 4th/5th axis

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA2/004582, functionality: fully functional, operating hours: 14,500 h, travel distance X-axis: 3,120 mm, travel distance Y-axis: 1,320 mm, number of axes: 5, TECHNICAL DETAILS X-axis travel: 3,120 mm Y-axis travel: 1,320 mm Number of axes: 5 MACHINE DETAILS Operating hours: approx. 14,500 h EQUIPMENT Suction pads Bsdpfx Aaey Akr Ae Dedb Mounted air-blow nozzle Newly installed control unit Note: The machine has already been dismantled by the manufacturer.