Used Emco for sale (149)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Codpsxzq Ncjfx Ac Njpu Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: like new (used), Year of construction: 2012, operating hours: 15 h, functionality: fully functional, EMCO control system (PC control, Windows-based, 12.1" LCD screen, 1 x RS232, 2 x USB, 3 x LAN 10/100-bit) Table size 700 x 520 mm Max. table load: 500 kgs T-slots on the table: 5 x 18 x 100 mm X-axis travel: 600 mm Cpsdpsx Atv Usfx Ac Neu Y-axis travel: 500 mm Z-axis travel: 500 mm Distance between spindle nose and table surface: 100–600 mm Speed: 0–10000 rpm Spindle taper: SK40 Rapid traverse X/Y/Z: 24 m/min Feed rate X/Y/Z: 10 m/min Drive power: 13 kW Power requirements: 400 V / 3 PE Full load: 20 kVA Weight: 4200 kg Dimensions Dimensions (L/W/H): 2100 x 2500 x 2700 mm Equipment and accessories: - Coolant system - Tools - Machine feet The machine is in nearly new condition. It was used in a training workshop.

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Cpedpexp Hudsfx Ac Nsu

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm Csdjyhcfkjpfx Ac Nspu • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Csdju N Avxjpfx Ac Njpu Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Codpfx Asyha Atoc Nepu Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2010, operating hours: 64,321 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz Cedpsx Hwfqjfx Ac Nspu - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck. Cpsdjx Hwanopfx Ac Neu

Condition: used, Year of construction: 2011, EMCO Hyperturn 45 – CNC Turning Machine - Siemens SINUMERIK CNC control system - Main spindle equipped with a full clamping cylinder (operation with bar feeder not possible; loading and unloading via automatic swing loader, see video) - Year of manufacture: 2011 Technical Data Working Area: - Maximum swing diameter over bed: 430 mm - Swing diameter over cross slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar capacity: 45 mm - Distance between main and counter spindle (spindle noses): 720 mm Slide Travel Range: - Slide travel X / X2: 160 / 150 mm - Slide travel Z / Z2 / Z3: 510 / 510 / 510 mm Main Spindle (Spindle 1): - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² Main Spindle Clamping System: - Hollow clamping cylinder (hydraulic) with draw tube, max. bar passage: 45 mm - Max. standard chuck size: 160 mm Main Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm Counter Spindle (Spindle 2): - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Z3 travel: 510 mm - Traverse speed: 45 m/min - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² - Counter spindle clamping system: hollow clamping cylinder with draw tube and integrated pneumatic parts ejector - Max. chuck size: 160 mm Counter Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm C Axes (Spindles 1 and 2): - Circular axis resolution: 0.001° - Rapid traverse speed: 1000 / 100 rpm - Spindle indexing (disc brake): 0.01° Feed Drives: - Rapid traverse X / Z: 30 / 45 m/min - Feed force X: 4,000 N - Feed force Z / Z2 / Z3: 5,000 / 5,000 / 6,000 N - Position scatter width Ps per VDI 3441 in X / Y / Z: 3 / 3 / 3 µm Turrets 1 and 2 (upper and lower system): - Radial tool turret with directional logic and driven tools - Number of tool stations per turret: 12 - Tool holders according to DIN 69880: VDI 25 - Tool cross-section (square tools): 16 × 16 mm - Boring bar shank diameter: 25 mm - Turret indexing time: 0.2 s Driven Tool Stations (coupling according to DIN 5480): - Number of driven tool stations per turret: 12 - Speed range: 0 – 6,000 rpm - Maximum drive power: 4 kW - Maximum torque: 16 Nm Cpedpfx Aceyglx Rs Nsu - Maximum duty cycle at maximum speed or power: 25% Lubrication System: - Guideways, ball screws: automatic central oil lubrication - Main spindle, counter spindle: grease lubrication Chip Conveyor: - Hinged belt conveyor, discharge height: 1,200 mm Electrical Connection: - Power supply: 400 V ~3/PE - Machine connected load: 30 kVA - Max. main fuse for the machine: 80 A - Required short-circuit power: 2,500 kVA Dimensions / Weights: - Height of spindle axis above floor: 1,126 mm - Overall height (incl. oil mist separator): 2,325 mm - Footprint (incl. chip conveyor, without cooling unit): 3,830 × 1,950 mm - Net weight of the machine without chip conveyor: 4,200 kg Sound Pressure Level: - Average sound pressure level: 78 dB(A)

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N Cedpfju Ixwiex Ac Nspu rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Cpsdpfjvvtpxsx Ac Nsu Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 Cjdpsvc Awrofx Ac Nopu interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Cpjdpfx Acow Rrvwo Neu Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: excellent (used), Please read the technical specifications thoroughly. If you are considering the machine as an investment, we kindly request that, for an offer to be made, you provide full identification along with a correct phone number and email address. EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital display Year of manufacture: 2007 with CE marking Centre distance: 700 mm Centre height: 170 mm Swing over bed Ø 340 mm Swing over cross slide Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Distance from turning centre to top slide: 34 mm Top slide (compound) swivel range: 60 / 120° Main spindle: Spindle mounting: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Front bearing spindle diameter: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. face plate diameter: Ø 200 mm Spindle speeds: 40 - 3000 rpm Stepless speed control Number of mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at drive spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045 - 0.787 mm/rev 20 (28) cross feeds X: 0.023 - 0.406 mm/rev Threads: 20 (28) metric threads (standard) Pitch: 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MK 3 Quill stroke: 120 mm Offset: ±13 mm Permissible workpiece weights: (between centres) 50 kg, supported by tailstock 150 kg Cpjdexx S R Aepfx Ac Nsu Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and vocational training. Equipment: - EMCO 3-axis digital display with colour screen - Potentiometer, EMERGENCY STOP button, speed digital display on control panel next to digital display - 3-jaw chuck - MULTIFIX tool post head size B - Electrically interlocked chuck guard - Quick-collet clamping device - MICROJET coolant spray system - Chip guard (rear wall) - Machine lamp - Machine feet - Bed stop Condition: Very good, from a training facility "Due to its quality and price, this machine is not suitable for private individuals." Available from March 2026.

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW Cpsdpjx Aq Hwsfx Ac Nou weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: used, Year of construction: 2001, Technical details: turning diameter: 220 mm turning length: 700 / 665 mm Cpjdpfsx Aq Hksx Ac Nou total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: used, Year of construction: 2000, Technical details: turning diameter: 360 mm turning length: 520 mm total power requirement: 20 kW weight of the machine ca.: 3,8 t Cpsdsx Dcgxepfx Ac Neu dimensions of the machine ca.: 3 x 2 x 2 m

Condition: used, Year of construction: 2000, functionality: fully functional, We are offering this used CNC lathe EMCO EMCOTURN 465 DS with bar feeder. Year of manufacture: 2000, location: Spain. Immediately available. Control: Siemens Cjdpfjyhdl Ejx Ac Nepu Turning diameter: 185 mm Cross travel (X-axis): 235 mm Longitudinal travel (Z-axis): left 270 mm; right 680 mm Workpiece diameter: up to 160 mm Length (external machining): up to 186 mm Bar parts Workpiece diameter: up to 65 mm Length (external machining): left 188/115 mm; right 160/115 mm Spindle mount: DIN 55026, size: A6 Spindle nose diameter (front bearing): 100 mm Spindle bore: 73 mm Drawtube/bar diameter: 66/65 mm Power: left 12 kW; right 9 kW Max. torque: left 193 Nm; right 140 Nm Speed range: 0–4,000 rpm Speed control: stepless Acceleration time 0–4,000 rpm incl. chuck: 3 sec AC motors on X and Z axes Feed force Z-axis: 7,000 N Feed force X-axis: 7,000 N Rapid traverse speed: 24 m/min Positioning accuracy according to VDI 3441 X/Y: 0.003 / 0.005 mm Turret with directional logic Number of tool positions: 12 Driven tools: 12 Repeatability (at 100 mm radius): ± 0.0008 mm Torque: 16 Nm Speed range: 0–4,000 rpm C-axis Rotary axis resolution: 0.001 mm Rapid traverse: 100 rpm

Year of construction: 2001, condition: excellent (used), Digital display Heidenhain. Slide travel range Slide travel longitudinal (X) 450 mm Carriage travel transverse (Y) 300 mm Slide travel vertical (Z) 350 mm clamping surfaces 800 x 400 mm Tool holder SK 40 quill stroke 100 mm Swiveling vertical milling head ± 90 Speed range 50-2500 rpm Machine dimensions: Cpedpenab A Nefx Ac Neu Length 1485 mm width 1475 mm height 1475 mm Weight approx. 1500 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,612 h, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis EMCO MILL E350 was manufactured in 2019, featuring advanced Siemens control for precise operations. Ideal for complex milling tasks, this vertical machining center ensures reliable performance. Consider the opportunity to buy this EMCO MILL E350 vertical machining center. Contact us for more information. Cpodpfsyfu Uxsx Ac Nju

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: SIEMENS, controller model: 840-D, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, spindle speed (max.): 10,000 rpm, This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center. Csdpfx Aeyftgysc Njpu Additional equipment • 2-fold pallet changer • 1 spindle cooling • Linear guide • 30-fold tool changer incl. tool holders • Coolant preparation with cooling incl. filter unit • Screw chip conveyor • Fully protected cabin with safety doors, electrically fused • Ball screw in all axes Machine Benefits Technical Machine Benefits • Machine only ran in 1-shift operation, maximum 3 days a week Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun Cpsdpfxjyffgrs Ac Nsu • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 spindle tunring speed 15.000 U/min max. torque 190 Nm tool taper HSK 63 table surface area 600 x 600 mm table load capacity 350 kg feed 60.000 mm/min auto power on hours ca. 7.975 h Cpsdjydqq Tepfx Ac Nou NC program ON ca. 1.999 h spindle hours ca. 1.378 h weight of the machine ca. 9.800 kg Overall size ca. 5.000 x 4.500 x 3.110 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - External coolant system with 3 nozzles, 4 bar - Internal coolant system, 20 bar - Scraper belt chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Milling machine EMCO F 3 3-axis digital readout Fagor Speeds 80 - 2200 rpm Travel X 300 Y 200 Z 350 Stepless feed Cpjdpsygtxfjfx Ac Neu Quill, vertical and horizontal milling spindle with 10 SK 30 tool holders Precision vice 150 x 250 clamping width Table 200 x 600 Coolant, lamp, machine feet Dimensions: H 1.6 m D 1.25 m W 1.1 m Condition: very good, guides and smooth operation flawless Of course, can be inspected under power Loaded free on truck D - 88433 Schemmerhofen

Condition: excellent (used), Year of construction: 2006, EMCOturn E45 CNC lathe with C-axis with barfeeder Year: 2006 turning diameter 220 mm turning length 310 mm control Siemens 840D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ca. 3.300 kg Accessories/options: - barfeeder for 1.5 meter bars - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup Cpsdpfx Ajygtgpec Neu - footpedal - tailstock - parts cather - collet type chuck with collets - 3-jaw hydraulic chuck - coolant tank