Machining center

Hasegawa PM 150

Year of construction: 2012, condition: excellent (used), 1. SCOPE OF SUPPLY - Hasegawa PM 150 compact machining center - Oil mist separator - Siemens fire extinguishing system 2. TECHNICAL DATA SPINDLE Spindle nose: HSK - E32 Speed: 100 - 30`000 rpm Motor: Spindle motor 3.0/4.5 kW TOOL CHANGER Tool capacity: 10 Tool to tool change time: 1.8 sec WORK TABLE Working area: 300 x 260 mm T-slots: 12H7 x 5 Workpiece weight: 80 kg TRAVEL X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm Gijdpfx Agognkp Uj Rju rapid traverse: 30 m/min Dimensions: 630 x 1950 x 2670 mm We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: good (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 55 mm max. module 6 Gjdstumrpjpfx Ag Rsiu min. module 1 Control 840 C Siemens total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Manufacturer: Hasegawa Model: PM 150 Year of manufacture: 2012 Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Table load capacity: 80 kg Table working surface: 300 × 260 mm Gijdpfxex Hqv Ne Ag Reu T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Giedpfxex D Irmo Ag Reu • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320 Gsdjuha Umopfx Ag Rsiu

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm Gjdpfxsifn N Ne Ag Rjiu (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. Gsdpfx Aex D I Smog Rjiu • Electrical: • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control

Year of construction: 2019, condition: ready for operation (used), Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 6 Movement Godpfx Agox D Rqxs Rjiu Y-Axis Movement ±31 mm Y-Axis Rapid Traverse 6 m/min B-Axis Movement 525 mm B-Axis Rapid Traverse 40 m/min C-Axis Rapid Traverse 600 rpm This 6-axis NAKAMURA WT-100 was manufactured in 2019 and features dual spindles with a speed of 6,000 rpm and a motor power of 11/7.5 kW each. It boasts a bar capacity of Ø42 mm and a maximum turning diameter of Ø190 mm. The machine includes a dodecagonal drum turret with 24 indexing positions and rapid traverse rates up to 40 m/min. If you are looking to get high-quality turning capabilities, consider the NAKAMURA WT-100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 36,000 rpm, operating hours of spindle: 4,651 h, spindle nose: HSK 50, number of spindles: 15, Equipment: CE marking, documentation/manual, VERTICAL MACHINING CENTER MIKRON MODEL HSM 800 X-AXIS TRAVEL 800 mm Y-AXIS TRAVEL 600 mm Z-AXIS TRAVEL 500 mm SPINDLE HSK E 50 SPINDLE SPEED 36,000 RPM WORKPIECE PROBE LASER MEASUREMENT SYSTEM OPERATION AND MAINTENANCE MANUALS CE CERTIFICATION CNC HEIDENHAIN iTNC 530 REMOTE HANDWHEEL SIEMENS MOTORS AND DRIVES HEIDENHAIN LINEAR GLASS SCALE MEASURING SYSTEM TOTAL OPERATING HOURS: 6447 Gisdpfxjw U T Szo Ag Rou SPINDLE HOURS: 4651

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA Gsdpjv E R E Aefx Ag Rsiu weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions