Used Emco Accessories for sale (152)

Condition: used, Year of construction: 2005, functionality: limited functionality, machine/vehicle number: Maschinen-Nr. F4UT3901, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, quill stroke: 100 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,120 mm, total width: 2,115 mm, total length: 2,220 mm, table width: 500 mm, table length: 900 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 63 rpm, overall weight: 2,550 kg, Equipment: documentation/manual, For sale is an EMCO milling machine, model FB-6. The Y-axis is malfunctioning when moving in the positive direction. Ncedpfxoyka Rcs Aqlew Accessories included: 2 hydraulic machine vices, a mobile cabinet with sliding doors for milling tools, including 17 tool holders, a tool drawer cabinet with approximately 150 different milling cutters, and a cabinet with hinged doors containing various milling cutters. Take advantage of the opportunity to inspect this machine on-site while it is powered on and assess its condition.

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm Nsdpfjvwgpbex Aqlscw - Parat 4-fold tool holder - Various tool holders

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 1,892 mm, total width: 875 mm, overall weight: 570 kg, spindle speed (max.): 2,000 rpm, spindle motor power: 750 W, product length (max.): 1,730 mm, number of axes: 3, This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details. • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–500 mm/min Ncjdjy E S Uqepfx Aqlew • Rapid traverse: 500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz Technical Specification Taper Size SK 30

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,459 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 18i, number of axes: 4, This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details. • Quantity: 2 machines (offered together) • 4th axis: Yes, mounted • Tool magazine: 30 stations • Automation: Lang Eco Compact 10 (2011) (fully functional) Additional equipment, not included Ncjdpjyxnmvsfx Aqlsw • Chip conveyor • Band filter • Tool holder package SK40 • 10 vices • Custom-made wooden floor grating for ergonomic loading Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2004, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2004 Control : Siemens 840D - Powerline Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping I:Collet chuck, SMW Autoblok Spannax Gr. 65 Workpiececlamping II:3-Jaw chuck, SMW Autoblok KNCS-N 260-72 : Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Nedpfx Aqsznqyzoljcw Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, Bristol EF Toolholder:Misc. static and driven toolholder Further Equipment:Spindlechiller, Rinsing pistol Further Accessory:Misc. used clamping heads and spindle reducers

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840D - ShopTurn, _____ Description: Year of manuf. : 2007 Control : Siemens 840D - ShopTurn Turning diam. : 300 mm Turning length : 480 mm Mainspindle: Technology:Belt-driven spindle Speed:6.300 rpm Njdjznqyuspfx Aqlecw Power (max.):13 kW Torque (max.):100 Nm Barcapacity:45 mm Workpiececlamping I:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Workpiececlamping II:Collet chuck, SMW Autoblok Gr. 52 Subspindle: Technology:Motorspindle Speed:6.300 rpm Power (max.):10 kW Torque (max.):42 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N 140-35 Ejector:Pneumatic Movement in Z:510 mm Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:160/70/510 mm Eilgang in X/Y/Z:24/10/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, UAS SMOG HOG Toolholder:Misc. static and driven toolholder Further Accessory:Misc. used clamping heads and spindle reducers

Condition: used, Year of construction: 2013, Technical details: bar material dia.: 65 mm turning length: 644 mm turning dia. over bed: 600 mm turning diameter over slide: 430 mm y-axis: 100 (+-50) mm turning speeds: 2x 5.000 1/min positive location each: 2x C-Achse, 0,001° Grad Sub spindle: ja/yes turret (x-stations): 2x 12 VDI 30 Pos. driven tools: 2x 12 Pos. turning speeds: 2x 4.000 1/min control: FANUC 18 iTB total power requirement: 30 kVA Njdephuwqjpfx Aqljcw weight of the machine ca.: 8 t dimensions of the machine ca.: 3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding" *

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cotrol system Fanuc 21iB. Probe Marposs T36. X ... 1200 mm Y ... 600 mm Z ... 640 mm Table ... 1300x620 mm Max. table loading ... 800 kg Taper in spindle ... ISO 40 Spindle revolutions ... 50 - 8000 rpm Number of tools in tool changer ... 24 ks Machine dimensions ... 2001 x 3641 x 3158 mm Weight ... 7000 kg Ncedpoyk D R Tofx Aqlsw

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 13,067 h, functionality: not functional, Equipment: documentation/manual, Control system issues (under Programs) Electrical fault (control boards) Suitable for spare parts Tool changer – chain conveyor included Without tools Ncsdpfx Aqeznvm Heljw Already disassembled and stored separately!

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 810D, workpiece height (max.): 190 mm, total height: 2,450 mm, total width: 2,400 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, overall weight: 2,900 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 12, tool weight: 5,000 g, positioning accuracy: 0.004 mm, product length (max.): 2,300 mm, number of axes: 3, This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us. • 2x units available (one newer and one older) with different Control Brands • Distance from Spindle Nose to Table: 210 – 450 mm • Number of T-Slots: 3 • T-Slot Width: 14 mm • T-Slot Spacing: 100 mm • Spindle Bearing Diameter: Ø60 mm • Bearing Type: Angular Contact Ball Bearing • Tool Taper: SK40 (DIN 69871 / ISO 7388-I) • Pull Stud: M16 (DIN 69872 / ISO 7388-II) • Automatic Tool Clamping • Tool Clamping Force: 6,000 N • Spindle Overhang: 330 mm • Spindle Motor Power: 9 / 11 kW (100% / 60% Duty Cycle) • Optional Spindle Speed: 0 – 8,000 rpm • Maximum Torque: 100 Nm (5,000 rpm) / 78 Nm (8,000 rpm Option) • Noise Level: 72 dB(A) at 5,000 rpm • Milling Capacity in Steel (16MnCr5 – 790 N/mm²): 220 cm³/min • Maximum Drilling Capacity in Steel: Ø25 mm • Maximum Tapping Capacity in Steel: M20 • AC Servo Drives with Ball Screw Spindles • Feed Rate (X/Y/Z): 0.01 – 12,000 mm/min • Rapid Traverse (X/Y/Z): 12 m/min • Feed Force X/Y: 6,000 N • Feed Force Z: 8,800 N • Resolution: 0.001 mm • Tool Carrier: Drum Type with Direction Logic • Automatic Tool Changer • Maximum Total Tool Weight in Magazine: 36 kg • Maximum Tool Diameter: 100 mm • Maximum Tool Length: 220 mm • Tool Change Time: T1: 5.8 s / T2: 3.9 s / T3: 3.9 s • Chip-to-Chip Time (VDI 2852): T1: 8.9 s / T2: 7.0 s / T3: 7.0 s • Coolant Tank Capacity: 100 L • Coolant Pump Flow Rate: 10 L/min • Maximum Coolant Pressure: 3.7 bar • Coolant Supply: 4 External Nozzles • Automatic Central Lubrication for Guideways and Ball Screw Spindles • Grease Lubricated Main Spindle Bearings • Power Supply: 3/PE ~ 400 V / 50–60 Hz • Maximum Voltage Fluctuation: +5% / -10% • Connected Load: 15 kVA • Rated Current: 22 A • Maximum Current: 25 A • Main Fuse: 35 A (Slow-Blow) • Required Short-Circuit Power: 1600 kVA • Pneumatic System Pressure: 5 – 10 bar • Minimum Air Flow: 750 L/min • Average Air Consumption: 180 L/min Additional Equipment Ncodpfoya Hg Njx Aqljw • Automatic 12-Position Tool Changer • Automatic Central Lubrication System • Coolant System with 4 External Nozzles • Automatic Tool Clamping System • SK40 Spindle Interface Machine Benefit: • Reliable 12-Station Automatic Tool Changer • Integrated Automatic Lubrication System for Guideways and Ball Screw Spindles Dimensions Machine Depth 2300 mm Technical Specification Taper Size SK 40

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm Ncodpeu Ixw Asfx Aqlow revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, Year of construction: 1992, Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 125mm Collet Chuck, 8 Tool Turret. S/No. RSG E2ES 002 S, Run Time 3241 Hours, Sameca Bar Feed Type SAM65. S/No. M062103 (1992) includes Autoblok Chuck, Selection of Tooling & Collets. Country of Origin: Austria Nodpfxjznkpce Aqlecw Location: This lot is located in Birmingham, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2004, emco VMC 300 D - CNC Milling Machine - SIEMENS Sinumerik 810D CNC Control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant system - 41,300 operating hours - Year of manufacture: 2004 Technical data Working area: - Travel in X-axis: 420 mm - Travel in Y-axis: 330 mm - Usable travel in Z-axis: 240 mm - Workpiece dimensions L x W x H: 400 x 300 x 190 mm - Distance between spindle nose/table surface: 210 - 450 mm Milling table: - Clamping area L x W: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: Ncjdpfezl D Awex Aqljw - AC motor, power (100/60% duty cycle): 9 / 11 kW - Speed range (continuously variable): 0 - 5000 rpm - Sound pressure level at 5000 rpm: 72 dB A - Max. torque: 100 Nm Machining performance: - Milling performance in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling performance in steel: ø 25 mm - Thread cutting performance in steel: M20 Feed drive (AC motor with individual drive + ball screw): - Feed rate in X/Y/Z axes: 0.01 - 12000 mm/min - Rapid traverse in X/Y/Z axes: 12 m/min - Feed force in X/Y axes: 6000 N - Feed force in Z axis: 8800 N - Resolution: 0.001 mm - Positioning accuracy X/Y/Z: 0.004 mm Tool system: - Tool magazine: Drum with direction logic - Number of tool stations: 12 - Insertion force: 6000 N - Max. permissible tool weight: 5 kg - Total permissible tool weight in magazine: approx. 36 kg - Max. tool diameter: 100 mm - Max. tool length: 220 mm - Chip-to-chip time according to VDI 2852 T1/T2/T3: 8.9 / 7.0 / 7.0 s - Tool change time (without traverse movements) T1/T2/T3: 5.8 / 3.9 / 3.9 s Lubrication system: - Guide rails & ball screw: automatic central oil lubrication - Main spindle bearing: grease lubrication Coolant system: - Tank capacity: 100 l - Max. flow rate: 10 l/min - Max. delivery pressure at 50 Hz: 3.7 bar - Coolant supply: 4 nozzles, external Electrical connection: - Power supply: 3/PE 400 V 50/60 Hz - Connected load: 15 kVA Pneumatic connection: - System pressure: 5 - 10 bar - Required minimum air flow (related to 1 bar): 750 l/min - Average air consumption (related to 1 bar): 180 l/min Dimensions: - Dimensions W x H x D: 2300 x 2450 x 2400 mm - Weight: approx. 2900 kg

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Ncjdpfx Aeznh Ddoqlow Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: used, Emco F3 - Milling Machine Accessories: - Vice - Workplace lighting - Coolant system - Tools & machine feet Nodpfx Aqjy A Sdyelocw - Operating manual Technical specifications: Working area: - Longitudinal travel: 300 mm - Transverse travel: 200 mm - Vertical travel: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Swiveling vertical milling head: ± 90° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Slot spacing: 45 mm Spindle: - Tool holder: DIN 2078 / SK30 - Tool clamping: extraction bolt M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slide: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (stepless) - Rapid traverse: 1200 mm/min Coolant system: - Tank capacity: 30 l - Pump capacity: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% duty cycle) - Speed: 1400 / 2800 rpm Dimensions: - Dimensions W x H x D: approx. 1200 x 1900 x 1400 mm - Machine weight: approx. 450 kg

Condition: good (used), Year of construction: 2005, EMCOMILL FB 6 (with digital scales X, Y, Z) Tool milling machine with 18 spindle speeds from 63-3150 rpm, 18 feeds in the X, Y, Z axes, toolmaker accuracy according to DIN 8615, slide travels X/Y/Z 700/500/500 mm, power 5.5 kW (100% duty cycle), hydraulic tool clamping, tool holder DIN 69871 SK 40, electrical connection 400/50/3, incl. Heidenhain scales in X/Y/Z, machine complies with CE, without counter support, with work area protection Manufactured according to ISO 9001: 1994 Ncedozln R Eepfx Aqljw Year of manufacture 2005 F4UT3901

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre height: 170 mm centre distance: 700 mm revolution per minute: 35 - 3000 U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm max. workpiece weight -without tailstock: 50 kg max. workpiece weight: 150 kg tailstock quill: 50 mm Nedpfxezlhhwe Aqljcw total power requirement: 5 KVA weight of the machine ca.: 0,78 t dimension machine xH: 1,7 x 1,0 x 1,4 m The EMCO EMCOMAT 17D is a high-quality conventional precision lathe designed for toolmaking, single-part manufacturing, repair work, and small-batch production. It is distinguished by its high accuracy, robust construction, and continuously variable spindle speed control. *

Condition: not inspected (used), Year of construction: 2006, operating hours: 28,200 h, functionality: unexamined, machine/vehicle number: R2EU3804, turning length: 310 mm, turning diameter: 220 mm, rotational speed (max.): 6,300 rpm, controller model: Siemens 810 DC powerline, Submitting a bid obligates you to collect the item on time, on July 30, 2026, at 1:00 PM! Technical data: ● Control system: Siemens 810 DC powerline ● Operating hours approx.: 28,200 ● Spindle hours approx.: 6,950 ● C-AXIS & POWERED TOOLS ● Tool holder: VDI 30 ● Number of tool positions in the turret: 12 (6 of which are powered) ● Max. bar diameter approx.: 45 mm ● Max. distance between centers approx.: 687 mm Ncsdpozlfcrefx Aqlsw ● Max. spindle speed approx.: 6300 RPM ● Internal coolant line through the turret ● Chip conveyor ● Parts catcher ● 400 V / 50 Hz / 17 kVA ● Further technical data - see images Scope of delivery: ● Existing manuals, chip conveyor, collet chuck ● The tool holders are not included in the scope of delivery! Dimensions & weights: ● Installation dimensions L x W x H approx.: 3700 x 2000 x 2200 mm ● Weight approx.: 3500 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,955 h, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, spindle motor power: 3,700 W, total width: 1,700 mm, overall weight: 1,400 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, product length (max.): 1,270 mm, number of axes: 2, Horizontal turning machine manufactured in 2014. This EMCO E25 features a maximum turning diameter of 85 mm and a maximum turning length of 225 mm. It includes a VDI 16 disk turret with 12 tool stations and a rapid traverse speed of 15 m/min in the X-axis. If you are looking to get high-quality turning capabilities, consider the EMCO E25 machine we have for sale. Contact us for further details. • Spindle motor power: 3.7 kW (5.5 kW at 40% duty cycle) • Spindle speed range: 60 - 6300 rpm (infinitely variable) • Feed Force: 3000 N / 3500 N • Rapid Traverse: 15 m/min / 24 m/min • Number of tool slots: 12 • Main electronic connection: 400 V (3/PE) • Power consumption: 6 kVA • Chip conveyor: Included • Swing over bed: 250 mm • Max. Turning Diameter: 85 mm • Max. Turning Length: 225 mm • Max. Bar Capacity: 25.5 mm • Distance between centers: 405 mm • Spindle Connection: Ø 70 h5 • Max. Chuck Size: Ø 100 mm • Max. Torque: 35 Nm • Turret Type: VDI 16 disk turret with directional logic • Tool Shank Cross-section: 12 x 12 mm • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Technical Specification Nsdpozk Ep Njfx Aqljcw Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2018, Rod diameter: 10 – 65 mm Maximum rod length: 3,000 mm Multi-track material support Nsdpfxjzkwcnj Aqlecw

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Siemens control system, 12-station turret (VDI16), collet chuck, Ncodpfxozkk Hye Aqlew jaw chuck, steady rest, driven tools, accessories

Condition: excellent (used), Year of construction: 2022, EMCOTURN E65 SMY - SIEMENS 3-AXIS CNC TURNING MACHINE WITH A TAILSTOCK AND POWERED TOOLS INCLUDING Y-AXIS AND C-AXIS Highly efficient universal turning machine for complete machining with stable and precise linear guides. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog programming. Main spindle: • Connection A2-6" (DIN 55026) • Max. bar diameter: ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Tailstock: • Connection A2-6" (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: • 12-position tool turret VDI 30 radially arranged with direction logic for up to 12 powered tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40mm Includes: • Hollow chuck cylinder incl. draw tube • C-axis for main/tailstock • Mechanical spindle brakes • Sinumerik 828D control with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 15" multi-touch color monitor - 3D simulation, etc. • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (additional pump (3.5 bar)) • Part ejector and flushing through the tailstock • Air gun with spiral hose • LED machine bay light • Hydraulic unit • Interface for chip conveyor • Vibration-damping leveling feet • Mounting angle and high-performance anchor • Documentation / CE certificate Machine No. S6E222101 Year of manufacture: 2022 Nsdezi Rr Tjpfx Aqlocw • Sinumerik 828D with dialog programming • Tool turret • 12-position tool turret VDI30 • Hollow chuck cylinder, C-axis for main and tailstock • Coolant system with coolant pump, part ejector • Hydraulic unit • Chip conveyor Jomatec 1200 mm • Tool breakage and wear monitoring • Part collection device • Short bar loader interface SL1200 • Tool measurement • 14 bar high-pressure coolant system • 3-jaw chuck BB-D 210/3 KK6 • Maximum machining length 175 mm • Maximum finished part diameter 65 mm • Maximum finished part weight 4.5 kg • Internal tool holder • Straight milling holder 90 mm • Angle drilling and milling holder • Door automation E 65

Condition: used, Year of construction: 2007, operating hours: 9,546 h, functionality: fully functional, machine/vehicle number: R2EVO401, turning diameter over cross slide: 210 mm, turning length: 500 mm, turning diameter: 210 mm, spindle bore: 45 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, overall weight: 2,600 kg, Equipment: documentation/manual, EMCO 45 E45 with bar feeder EMCO Compact Load Control system: Siemens 810D Turning length with chuck: 500 mm Ncsdezlihlspfx Aqlsw Max. turning diameter between centers: 210 mm Bar diameter: 45 mm Rapid traverse rates: 24/20 m/min Headstock: DIN 55026/KK5 12-position tool turret VDI-30 6 driven stations C-axis Tailstock with hydraulic quill MK-4 Power chuck Röhm KFD-HE 170/3 Removal, loading, and transport are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, center height over cross slide: 200 mm, overall weight: 865 kg, spindle motor power: 5,300 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet and various tool cassettes, collets, and 4 RÖHM chucks. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable construction – 865 kg machine weight - Safety monitoring via electrical limit switches - Equipped with a modern 3-axis digital display Technical data: - Center distance: 1000 mm - Center height: 200 mm - Swing over bed: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 - Drive power: 5.3 kW - Tailstock diameter: 50 mm - Taper: MK3 - Travel: 120 mm - Dimensions (L x W x H): 1950 x 1060 x 1635 mm Nedpfxeyxvqvo Aqljcw - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: - Machine including drawer cabinet and various tools, tool cassettes, etc. (see pictures) - 4 RÖHM chucks (3 and 4-jaw chucks) - Complete documentation (operating manual, wiring diagram, etc.) Quality & Safety: The machine impresses with the typical EMCO quality "Made in Austria": Interested? Please contact us to arrange a viewing appointment or to receive a quote.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, total height: 1,850 mm, total length: 3,100 mm, total width: 2,000 mm, Emco Turn 365 CNC lathe. Year of manufacture 1998. Includes bar feeder. Travel range X/Y/Z: 210/40/610 mm Y-axis Counter spindle Powered tools Max. turning diameter: 310 mm Ncodozlg Ntspfx Aqlew Max. spindle speed: 5000 rpm Location: Salzburg. Delivery possible.