Used machining centers (horizontal) X-axis travel 1000-1199mm for sale (55)

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Guedpsx Hn D Dsfx Ag Dok Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Gujdolaugaepfx Ag Djk Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements height 3280 mm Machine weight 24000 kg Gsdpfx Aex D Rttog Deuk Main Drive Spindle speed range 12000 Tool taper HSK 100 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Table Table load 1200 kg This 4-axis Okuma MA 600H II was manufactured in 2019, featuring a robust 630 × 630 mm table, capable of handling loads up to 1,200 kg. It boasts rapid traverse rates of 60 m/min and a high-speed spindle up to 12,000 rpm, ensuring efficient machining. The machine includes a large tool magazine with 171 stations and advanced features like spindle cooling and a chip conveyor system. If you are looking to get high-quality milling capabilities consider the Okuma MA 600H II machine we have for sale. Contact us for more information. Application Types Milling

Condition: as good as new (ex-display), Year of construction: 2022, Control : Heidenhain TNC 640 Working area Travels X : 1,020 mm Travels Y : 700 mm Travels Z : 500 mm Clamping surface (L x B) : 1,050 x 700 mm Table load max. : 800 kg Guodpjt A Ucpofx Ag Dok Spindle Speed : 15,000 rpm Tool holder : SK 40 In general Tool changer : 30 stations Machine bed : Meehanite cast Rapid traverse (X/Y/Z) : 32 / 32 / 32 m/min Equipment / Accessories Chip management : Chip conveyor Coolant : high pressure coolant 30bar Handwheel : electr. Handwheel Additional parts : flushing gun Linear scale : direct

Condition: used, Overall dimensions (machine and tool magazine) : 7000 x 4400 x 3850 mm Shipping dimensions (machine) : 7000 x 3500 x 3850 mm Tool magazine dimensions : 6000 x 2100 2850 mm TECHNICAL DETAILS x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm Control name: Siemens Feed force X-axis: at ED S3 -40% 15000 N Feed force Y-axis: at ED S3 -40% 15000 N Feed force Z-axis: at ED S3 -40% 20000 N Feed rate in X, Y and Z axes: 1 - 30000 mm/min Rapid traverse speed: 30000 mm/min Acceleration in X-, Y- and Z-axes: 3.0 m/s² Rotary indexing table: 20 l/min Guedpfjxzdr Rox Ag Dok Tool holder: SK50 Spindle diameter in the front bearing: 100 mm Speed range: 45 - 4,500 rpm Pallet size: 630 x 800 mm Pallet change time: 21 s

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Gujdpex Ad Nlefx Ag Djk Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: good (used), Year of construction: 2007, Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Guodpox Hnwkefx Ag Dok Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe Gjdpfx Agjxylqxs Dsuk - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Guedox D Rtmepfx Ag Dek Z-Axis Rapid Traverse 60 m/min Table Table load 1200 kg Tools Number of station 171 Type of tool holder HSK 100 This 4-axis Okuma MA 600H II was manufactured in 2019. It features a 630 × 630 mm table, capable of handling loads up to 1,200 kg, and a high-speed spindle up to 12,000 rpm. The machine offers rapid traverse rates of 60 m/min and a comprehensive tool magazine with 171 stations. If you are looking to get high-quality milling capabilities consider the Okuma MA 600H II machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Machine type: CNC Horizontal Machining Center Model: FH6800 Manufacturer: MAZAK Control: Mazatrol 640M Year of initial operation: 2010 Gjdpfxoxxzlve Ag Douk Location: Germany Options: - Number of tool magazine pockets: 80 pcs - MAZAK Monitoring B (Renishaw probe) - Software options package “Performance” - NC rotary table (C-axis) 0.001 degree - Chip conveyor Mayfran Consep 2000 - Through-spindle coolant (IKZ) pressure: 20 bar Travel X-axis: 1,050 mm Travel Y-axis: 800 mm Travel Z-axis: 880 mm Rapid traverse X/Y/Z-axis: 40 m/min Pallet size: 630 x 630 mm Max. spindle speed: 7,000 rpm Coolant supply: 20 bar

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Siemens, controller model: Siemens 840d solution line SL, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, workpiece height (max.): 900 mm, workpiece diameter (max.): 900 mm, table width: 630 mm, table length: 630 mm, table load: 850 kg, overall weight: 16,000 kg, spindle speed (min.): 5,000 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 960 h, coolant supply: 70 bar, spindle motor power: 43,000 W, spindle nose: HSK100, number of spindles: 1, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, rotational speed infinitely variable, List price new: €749,000 HSK100, the machine is in like-new condition and has not yet produced any series parts. So far, only one component has been sampled. Guedpfx Agsxzh Ebs Dsk

Condition: used, Year of construction: 2007, operating hours: 40,933 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 280 C Operating hours: 40.933h Year of construction: 2007 Control unit: Siemens 840D PL Spindle: 8.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine / places (Options): Rack / 234 (Operating panel at the tool loading station with terminal) Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 100 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Receiver for measuring probe (RENISHAW); interface exhaust system; additional weight for pallets; drill fracture sensing; status lamp; interface exhaust system; integrated tool and collision monitoring; toolshaft cleaning; tool codechip; Interface handheld; Godexwpmxepfx Ag Deuk

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Gsdpfox Hnwdjx Ag Djuk Further information: Coolant system = 1250 l

Condition: excellent (used), Kitamura HX630i Horizontal Machining Center Year of manufacture: 2010 Control: Fanuc 16i-MB Travel paths: X: 1000 mm Y: 800 mm Z: 820 mm Guedpfexx Drxsx Ag Djk B axis: 0.001° Table size: 630 mm x 630 mm Spindle: 12,000 rpm Tool changer: 50 positions Tool holder: BT50 The machine is in very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 6110 mm Measurements depth 3380 mm Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Godpfox D Hzyox Ag Deuk Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Tools Number of station 150 Max weight 25 kg Max tool diameter 140 mm Max tool length 450 mm Type of tool holder HSK 100 This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2015, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Sinumerik 840Dsl, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, rotational speed infinitely variable, 2x Heller H6000 + Fastems Container Automation Horizontal Machining Centers with Flexible Pallet Container Heller H6000 2 machines with identical specifications Travel ranges Feed force X 1000mm 15kN Y 1000mm 15kN Z 1000mm 20kN B 360°, 0.001° Direct linear measurement system on all axes Rapid traverse: Axis dynamics Power X/Y/Z 50 m/min, 5m/s² B 25 rpm Godpfx Asxxx Dceg Dsuk Spindle – Power Cutting Interface: HSK100 Speed: 5–8000 rpm Power: 43kW (40% duty cycle) Torque: 822Nm (40% duty cycle) Last spindle replacement: 2020 Tool Magazine Type: Shelf magazine Magazine positions: 265 Max. tool length: 600mm Max. diameter: 280mm Tool coding: Balluf chip Second control panel at setup station Setup station with 7 exchange positions Pallet changer Pallet size: 630x630mm Max. interference circle: 1000mm Max. height: 1200mm Max. weight: 1000kg Coolant system: Scraper belt chip conveyor Knoll coolant system Paper band filter Internal coolant supply (ICS) 50 bar, frequency controlled Work area rinsing Emulsion mist extraction Disc blow-off device for operator door Additional equipment: Facing slide device (auxiliary axis/U-axis) 4 facing slides per machine Tangential control incl. NC cycles Wireless measuring probe (Renishaw) Space requirements: 7100x3750x4300mm (LxWxH) Machine weight: 15,600kg Total power requirement: 44kVA Control: Sinumerik 840D sl Fast drill breakage monitoring Process-integrated tool monitoring Status lights 3D workspace model data Operating data acquisition (OPC/UA) Year of manufacture: 2015 Operating hours: approx. 32,000h (Machines still in operation) Fastems Pallet Automation FPC1500 Base container with 2 setup stations Extension container Total 20 pallet positions on 2 levels Control: MMS Space requirements: approx. 18x2.4x4.2m Total space requirement for the system (2x Heller + Fastems) approx. 18x10x4.5m Machines are still in ongoing production. Inspection possible by arrangement. Relocation of the machines can be organized.

Condition: used, Year of construction: 2002, Technical details: x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 20 t Gusdpfew T Tntox Ag Dsk dimensions of the machine ca.: 6,80 x 3,0 x 3,20 m Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, Description: Heidenhain 530 iTNC Control Working ranges X-axis [mm] 1,600 Y-axis [mm] 1,200 Z-axis [mm] 800 B-axis rotary table 360° C-axis Gujdpexwbbnjfx Ag Djk W-axis Milling head Power (S1/100%) [kW] 25 Torque (S1/100%) [Nm] 200 Spindle speed [rpm] 10,000 Tool holder HSK-A100 Table size [mm] 1,600 x 1,600 Maximum workpiece weight [kg] 10,000 Rapid traverse [mm/min] 30,000 Axis acceleration [m/s²] 2.5 Automatic tool changer for 10 tools IKZ (internal coolant supply) Chip conveyor Machine weight [kg] 40,000 (total) Robust 4-axis machining center, specifically designed for tool, mold, and die manufacturing 4-sided machining enabled by rotary table Enclosed double-beam and cross-slide structure with an internally, completely guided ram-type milling unit Vertical gantry design ensures controlled dynamics and high accuracy Consistently excellent milling results due to load- and thermo-symmetrical machine architecture Stationary workpiece setup guarantees consistently high surface quality High productivity through roughing and finishing in a single setup Optimal chip removal, especially in deep cavities

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm Gedjxvw I Iepfx Ag Djuk - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm Gsdpfx Agexcp R Uo Douk In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 21000 kg Control Unit Model 31i–Mod.A Gusdpfx Agsx D I Rvo Djk Brand FANUC Main Drive Number of spindles 1 Spindle speed range 600 Spindle motor power 30 Kw Tool taper ISO 50 Din 69871 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 48 m/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 48 m/min Z-Axis Movement 850 mm Z-Axis Rapid Traverse 48 m/min Tools Number of index 60 Media Chip conveyor Yes Additional Equipment 2 Pallets (dimensions 630 x 630 mm, indexing: 1°, change type: 180° rotary, weight allowed on the pallet: 1,200 kg) Renishaw predisposition Remote electronic handwheel The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details. Application Types Milling

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Gusdpoxvw Izsfx Ag Dek Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 3400 MM Measurements depth 8000 MM Measurements height 3300 MM Machine weight 24000 KG Main Drive Spindle speed range 6000 RPM Number of axis 4 Movement X-Axis Movement 1000 Y-Axis Movement 800 Gedpfxjx D R Evs Ag Douk Z-Axis Movement 810 Table Outer length 630 MM Outer width 630 MM Additional Equipment Number of tools (atc warehouse) 160 This 4-axis OKUMA SPACE CENTER MA-600HB horizontal machining center was manufactured in 2007. It boasts a robust 160-tool ATC warehouse, continuous 4th axis table, and high-pressure cooling system at 30 BAR. With X/Y/Z strokes of 1000/800/810 mm and a maximum spindle speed of 6000 RPM, this machine ensures precision and flexibility for various machining tasks. The OKUMA MA-600HB machine we have for sale is designed for heavy-duty machining, accommodating pieces up to 1500 kg. For further details, please contact us. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, operating hours: 400 h, General Data Machine weight 15000 kg Measurements height 3950 mm Dimensions Machine Length 9500 mm Table Guodpfjx D D I Djx Ag Dek Table load 1000 kg Control Unit Brand FANUC Model 16iMA Main Drive Spindle Speed 10000 RPM Number of axis 3 Spindle motor power 30 kW Movement Z-Axis Movement 1000 mm Y-Axis Movement 1200 mm X-Axis Movement 1080 mm This 5-axis MORI SEIKI SH8000/5AX was manufactured in 2002. Fully overhauled in 2016, it features a Fanuc 16iMA control, a spindle speed of 10,000 rpm, and a tool magazine with a capacity of 150 tools. The machine has a pallet size of 630 × 630 mm and a loading capacity of 1000 kg. If you are looking to get high quality milling capabilities consider the MORI SEIKI SH8000/5AX machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 3415 mm Measurements depth 6015 mm Measurements height 3500 mm Movement X-Axis Movement 1050 Y-Axis Movement 920 Z-Axis Movement 960 A-Axis Movement +30°～-120° B-Axis Movement ±360° Table Outer length 630 mm Outer width 630 mm Media Chip conveyor Yes Additional Equipment Tool Magazin: ATC 240 positions Air Cleaner: AR Filtrazioni Equipment: Chip conveyor, Laser tool presetting Gjdpsx D Svvefx Ag Djuk This 5-axis Matsuura MAM 72-100H was manufactured in 2016, offering advanced capabilities for efficient and precise machining. Ideal for complex parts, this horizontal machining centre is a robust addition to any production line. Consider the opportunity to buy this Matsuura MAM 72-100H horizontal machining centre. Contact us for more information. Application Types Milling