Used Steinau Construction Door for sale (26,886)

Condition: ready for operation (used), Year of construction: 1997, SCHMID T3-400 2 Nutation Press / Taumelpresse Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 2 Machine No.: T3-400 2 / MK20166 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Nutation press / Taumelpresse Control: Siemens PLC Operation: Automatic / PLC controlled Technical Data Press type: Nutation press / orbital forming press Nominal press capacity: 400 t / approx. 4,000 kN * Number of pressing stations: 2 / double station configuration * Working direction: Vertical Press construction: Four-column press Tool / die arrangement: Upper and lower tooling Operation: Hydraulic Machine cycle: Automatic / programmable *The 400 t capacity and interpretation of “2” as the machine configuration are consistent with the T3-400 designation, but I would not advertise those two as manufacturer-confirmed specifications unless you have the original technical manual. Control & Electrical Equipment Control system: Siemens PLC PLC hardware: Siemens SIMATIC Power supply module: Siemens SITOP PSU8200 Operator control: Machine-mounted control panel Electrical cabinet: Separate integrated electrical cabinet Electrical Data Ksdpfezvnqtjx Abnedr Connection voltage: 3 × 400 V Frequency: 50 Hz Total connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 These values are directly readable from the SCHMID machine plate in your photo. Press / Working Area Press frame: Four-column construction Number of columns: 4 Lower tool table: Circular tooling / die mounting arrangement Upper tool holder: Circular tooling arrangement Machine enclosure: Fully enclosed working area Access: Front access door Automatic workpiece handling: Integrated Hydraulic lubrication system: Yes Production Counter Total strokes displayed: 19,304,255 strokes

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. Kjdpfxozgh Tvj Abnsdr The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: ready for operation (used), Year of construction: 1995, turning diameter over cross slide: 560 mm, spindle bore: 100 mm, turning diameter: 560 mm, turning length: 3,000 mm, Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Passage: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: kg Blue year: 1995 Options: Tools included Movie available! Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Tube diameter: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: 0 kg Year of manufacturing: 1995 Options: Includes tools Movie available! Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Kdjdpferfw Nwex Abnjr Padovani Labor 275 E Electronic Teachin Drehmaschine Drehdurchmesser over the bed: 560 mm Carriage door diameter: 100 mm Drehlänge: 3000 mm Transport abmessungen (LxWxH) 490x140x160 cm Weight: 0 kg Construction year 1995 Optionen: Inklusive Werkzeug Film verfügbar! Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 500 mm, spindle bore: 75 mm, turning length: 1,000 mm, turning diameter: 500 mm, Equipment: rotational speed infinitely variable, Dormac CY-K500T Teachin lathe Turning diameter above bed: 500 mm Passage: 75 mm Turning length: 1000 mm Transport dimensions (LxWxH): 300x180x210 cm Weight: 2800 kg Steering: Fagor Year of construction: 2009 Options: Including tools and documentation Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Dormac CY-K500T Teachin lathe Turning diameter above bed: 500 mm Tube diameter: 75 mm Turning length: 1000 mm Transport dimensions (LxWxH): 300x180x210 cm Weight: 2800 kg Control: Fagor Year of manufacturing: 2009 Options: Includes tools and documentation Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Dormac CY-K500T Teachin Drehmaschine Drehdurchmesser over the bed: 500 mm Basket door diameter: 75 mm Drehlänge: 1000 mm Transport abmessungen (LxWxH) 300x180x210 cm Weight: 2800 kg Steuertyp: Fagor Construction year: 2009 Optionen: Enthält Tools und Dokumentation Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Kodpfx Ajrfxihjbnsdr Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules Kdodpozvdc Sefx Abnsr • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Condition: excellent (used), Used steel hall, 36.5 x 13.5m, eaves height approximately 9.8m from finished floor level, gable roof with 3° pitch, top of rail for mounting bridge cranes approximately 8.5m above finished floor level. Originally, the existing hall had 2 x 10t cranes installed. Steel structure including roof and wall purlins, crane runway, 2 x 10t cranes – without wall panels, windows, and doors. As can be inspected on site. Base plates must be newly constructed by the buyer. Price is for the hall as it stands at the location: 56759 Kaisersesch. Kdedpfx Abopqx I Hjnor

Condition: new, Year of construction: 2023, loading space volume: 21 m³, Hooklift container    • Internal dimensions: 6000 x 2300 x 1500 mm    • Volume: 20.7 m³    • Reinforced floor beams    • Double doors Kdjdpfx Aozvnynobnjr    • Rollers    • 1 external step    • High-quality, heavy-duty construction Condition: New Year of manufacture: 2023

Year of construction: 1961, condition: used, functionality: fully functional, machine/vehicle number: 15/15/61, VEB Ellma Double-ended tenoning machine - 1100, manufactured in 1961. Machine designation and size: KS Manufacturing number and year of construction: 15/15/61 Total weight: 5.55 t Wiring diagram: G1-106/1 Sp Wiring diagram code: Lp Voltage type: ~ Frequency: 50 Hz Kjdpezavpgofx Abnodr Operating voltage: 380 V Control voltage: 220 V Connected power: 15 kW Machine rated current: 28 A Auxiliary machine rated current: 2 A Time-delay fuse: 25 A The used double-ended tenoning machine is in working order; it was mainly used for precisely cutting door components to length. The electrical components have recently been replaced, including a new electrical panel, as well as the feed motor and speed control mechanism. The machine has 2 vertical saws and 8 milling cutters, including 2 horizontal saws.

Condition: good (used), overall weight: 3,200 kg, type of input current: three-phase, input voltage: 400 V, For Sale: Costa Levigatrici KA CC 1350 Industrial Wide Belt Sander (2004) High-performance, heavy-duty wide belt calibrating and sanding machine manufactured by Costa Levigatrici S.p.A. (Italy). Known for its exceptional build quality, reliability, and accuracy in high-capacity woodworking and panel production environments. Key Specifications Manufacturer: Costa Levigatrici S.p.A. (Italy) Model: KA CC 1350 Serial Number: A40506 DR 1 Kdsdpfezu Sbmjx Abner Year of Manufacture: 2004 Working Width: 1,350 mm Aggregates / Heads: 2 Sanding Belts ("CC" Configuration) Total Power: 57 kW Amperage / Voltage: 109 A / 400 V (50 Hz) Total Machine Weight: approx. 3,200 kg Certification: CE Compliant General Overview & Features Capacity: 1,350 mm working width allows for handling large panels, solid wood components, doors, and composite boards. Dual Head Configuration ("CC"): Designed for efficient combined calibrating and finish sanding operations in a single pass. Robust Construction: Industrial-grade heavy-steel frame (3.2 tonnes) ensures vibration-free operation and precise thickness tolerances. Applications: Ideal for solid wood processing, panel sizing, veneer finishing, and lacquer sanding lines. Condition & Inspection Status: Used / Good condition Location: Available upon request Inspection: On-site inspection can be arranged prior to purchase.

Condition: good (used), Year of construction: 1989, functionality: fully functional, For sale is an OTT Alpha wide belt sanding machine in a robust industrial design. This machine is ideally suited for calibrating and fine sanding solid wood, veneer, MDF, chipboard, and other wood-based materials. The proven OTT technology impresses with its stable construction and reliable sanding results. Manufacturer: OTT Type: Alpha 110 Wide belt sanding machine Calibrating and fine sanding machine Robust industrial design Dimensions in mm: 1860W x 1970D x 2100H 1100mm working width Max. workpiece thickness 1600, min. 3mm Sanding belt 2150 x 1120mm 4 + 8 m/min feed rate 11 kW motor 10 liters/min Kodjzrnlvopfx Abnodr Weight: 2500kg Feed belt with rubber pad Sanding unit with wide belt Pneumatic belt tensioning Pneumatic sanding shoe control Control panel with clear machine control Ammeter for load monitoring Pressure gauges for pneumatics Emergency stop switch Large maintenance doors for easy service access Integrated dust extraction connections Solid machine construction for low-vibration operation Ideally suited for: Carpentry shops Joinery shops Furniture manufacturing Interior finishing Door and window manufacturing Series and single-piece production Condition The machine is in used condition with age-related signs of wear. It comes from a carpentry shop and impresses with its robust industrial quality. Inspection and trial run are possible at any time by appointment. Transportation is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, intermediate sales and changes reserved. All information without guarantee.

Condition: used, - Dimensions: 1210x700x1330 mm - Table dimensions: 900x480 mm - Model: KMN2-MUL-W - Serial number: 0061355KMN2 - Capacity: 281 L Ksdpfjy If Uvex Abnodr - Temperature range: -2°C to +8°C - 9 pans - 2 doors - Year: 2020 - Refrigerant gas: R134A - Glass construction - Space for 9 pans - Adjustable temperature - Digital display - Voltage: 220V - Power: 360W - Weight: 153 kg

Condition: used, Year of construction: 2023, Labelling machine for the cold-glue application of paper front, back and belly labels onto glass bottles. Equipped with a Domino CO₂ laser for label marking. The labelling machine was upgraded in 2023 with a mechanical overhaul and a refurbishment of the electrical systems. Additional title: cold glue labeling Kjdpfx Abezu Rzljnsdr Capacity appr.: 60000 bo/h Current: 32 A Voltage: 400 / 230 V Frequency: 50 Hz Formats: 0.5 l Longneck Operation / Control: Simatic S7-1500 Position: in stainless steel housing on feet Base construction: carousel-type machine Features: label magazines; glue pumps; safety doors; control cabinet; operator terminal with visualisation

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay Kdjdpfx Aozr Ircsbnjr • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of construction: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning spread Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLC outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (including automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and single image transmission to the network (view of the first 2.5 m) Additional 10 m extension of the LLC between laser and machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine with platform design (without steel structure) Connection to STOPA large storage system (SKL or UL) Safety devices for storage system connection including 2nd light barrier circuit Storage system interface (without storage carriage) LiftMaster Compact (STOPA version) TRUMPF Laser: Solid-state laser TruDisk 8001 with one LLC outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Kdodpozu Sqhsfx Abnor Cutting head: Universal cutting unit with fully adaptive lens system Single cutting head strategy Protective glass against lens contamination Condition check of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shut-off Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via Internet Data transmission: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust collection system Machine enclosure, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding any warranties or guarantees. Subject to prior sale.

Year of construction: 2024, condition: used, We are selling our workshop heater, which we have been using for about 1.5 years. The oven comes with a chimney pipe, as well as approximately 20 meters of ducting for warm air distribution. The unit is in good condition. Please note: collection and disassembly by the buyer only. If interested, please get in touch — we look forward to hearing from you! Technical specifications for the heater are as follows: — Nominal heat output: 30.00 kW — Maximum heat output: 35.00 kW / approx. 400 m² — Supplied with axial fan: Speed 1380 rpm, air flow: 4650 m³/h — Supplied with SCL-1515 fan control unit — Innovative air jacket design completely surrounding the combustion chamber for maximum efficiency — Durable combustion chamber, made entirely of certified boiler plate steel (16M06 #6mm thick) — Large flue which reduces fuel consumption by up to 30% — Energy efficiency class: A — Energy efficiency index: 110 — Net weight: 260 kg — Gross weight: 290 kg — Grate: 1000 x 250 mm — Coated with certified heat-resistant paint for corrosion protection and attractive appearance Kjdpfxoxgf Scj Abnjdr — Solid construction — High-performance combustion chamber (100 x 55 cm) — Large loading door — User manual included — Efficiency: 72.00% — CO emission at 13% O₂: 1.20 m — Recommended fuel: seasoned hardwood with moisture content ≤20%* mg/Nm³, briquettes, coal (up to 10%) Dimensions: — External dimensions (W x D x H): 650 mm x 1350 mm x 920 mm — Firebox dimensions (W x L x H): 550 mm x 1000 mm x 450 mm — Upper door (3 and 4 mm steel plate): 410 mm x 340 mm — Lower door (3 and 4 mm steel plate): 410 mm x 150 mm — Upper loading aperture: 320 mm x 320 mm — Lower opening: 320 mm x 130 mm — Grate: Width 250 mm x Depth 1000 mm — Hot air outlet diameter: Ø 150 mm — Flue gas outlet diameter: Ø 150 mm — Leg height: 140 mm

Year of construction: 2020, condition: used, functionality: fully functional, This is a combination steamer, model CMP 201, in an electric version, manufactured by the premium brand Rational, built in 2020. Kedpfx Abozmu Akenjdr The unit features an automatic self-cleaning program! The combination steamer has only 982 operating hours. The combination steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible options for shipping or self-collection. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow, and cooking time. Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Serial number: E21MI20022814161 Year of construction: 2020 Condition: Used, inspected and fully functional. Further information: Possible applications: Steam operation: from 30° C to 130° C Hot air operation: from 30° C to 300° C Combination operation: from 30° C to 300° C Finishing®: prepares pre-cooked and chilled dishes to the optimal serving temperature in an ideal climate. Automatic separation of fat for clean cooking chamber air. Automatic cleaning program. 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food. Ventilated double-glazed door (swivels for easy cleaning). Cooking chamber lighting. Core temperature measurement by means of a sensor. Cool-down function. High-performance fresh steam generator (automatic rinsing and emptying). Handheld spray nozzle with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2006, CNC WORKING LINE FOR DOOR FRAMES, comprising: 1 HORIZONTAL LOADING TRANSFER MOTORIZED, model 0190 T.C Loading buffer with horizontal transversal belts and motorized rollers with variable speed control. 1 gasket insertion unit on a horizontal groove, consisting of: - 2 motorized gasket roll holders - 1 pressure roller insertion unit - 1 cutting unit positioned near the end of the profile 1 cutting/drilling machine for finished cuts, model 01TFRD SPECIAL, referencing the upper workpiece. Suitable for cutting, drilling, milling, and hinge (anuba) insertion on door jambs. Kdjdpfx Asygcmfjbnor MACHINE CONFIGURATION: Worktable constructed of a solid steel frame, with a fixed left section and a movable right section. Electronically controlled positioning system, supporting a total of 6 machining units: 2 on the right, 2 on the left, and 2 on the upper bridge. 1 CENTRAL MOTORIZED SHUTTLE with CNC control for milling the ends of jambs. 1 HORIZONTAL RADIAL CUTTING STATION, 0-45°, quick tilting with selector, featuring 2 groups (one per side). Each side with its own motor, including a timed entry system to prevent double cutting positions. Cutting motor power: 5 HP – 3000 rpm – inverter-controlled. Cutting blade bore: 30 mm. Saw blade diameter: 370 mm. Adjustable extraction hoods and safety guards. 1 HORIZONTAL HEAD DRILLING STATION 0-45°, fast vertical tilt with selector, with 2 groups (right and left). 2 HP motor, 3000 rpm. 7-spindle drilling head with 32 mm pitch. Individually selectable spindles. Groups travel on linear guides for increased speed and drilling accuracy, with longitudinal and vertical adjustment capability. 1 UPPER VERTICAL ROUTING (PANTOGRAPHING) STATION, on a transverse bridge, with 1 motor for counterplate slotting, 2 HP, 12,000/18,000 rpm. Vertical, horizontal, and depth (x-y-z axis) movements are CNC-controlled, utilizing precision linear guides and recirculating ball carriages. Equipped with tool holder collet. 1 HORIZONTAL ANUBA DRILLING STATION, with 1 CNC-positioned motorized unit moving in conjunction with the router. Includes a drilling unit, custom Anuba inserting unit, and custom Anuba feeder with approx. 35 piece capacity (depending on Anuba diameter). 1 LINE CONTROL COMPUTER Capable of importing data (CSV or ASCII) via MMC (Memory Card). Note: The imported data will be used for automatic positioning and execution of processing steps as per the job list. Workpiece dimensions: Minimum length: 580 mm (45° internal for frame) Maximum length: 3000 mm (45° external for frame) Minimum thickness: 30 mm Maximum thickness: 60 mm Minimum width: 75 mm Maximum width: 300 mm

Condition: new, Year of construction: 2022, NEW ❗❗❗ office container/residential container for sale/ In stock ❗❗❗ External dimensions: 240x 400x 240H Description of standard version: • Insulation roof/wall PU- 40 mm • Sandwich panels - (Standard RAL 9002) • Frame color - (standard RAL9002) • Floor - laminate • 1x 90x200 outer door • 2x windows (turn/tilt & fix) • LED lighting (inside/outside) • Electrical box with circuit breaker Kodpshy Tb Nsfx Abnodr • 32 A power connection including sockets BS Containers have a high quality standard and are ISO 9001-2015 certified. The materials selected for the containers correspond to the specified EU standards. Our containers are particularly characterized by: High-quality materials Stable construction Premium insulation individual design Versatile uses The price is a net price. For companies with EU VAT ID no. no VAT will be charged (price equals take-away price).

Condition: new, functionality: fully functional, Year of construction: 2025, color: white, overall weight: 1,100 kg, empty load weight: 1,100 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: SUN-2, Sun Container GmbH | Office Containers | Living Containers | Construction Site Containers | Model SUN-1 | 240cm x 600cm | High-Quality and Flexible Solutions xq Available products can be viewed at our warehouse and picked up directly. Our office and living containers offer an excellent solution for a wide range of applications, characterized by outstanding quality, maximum flexibility, and short delivery times. Technical Details: Dimensions: • Length: 600 cm • Width: 240 cm • Height: 250 cm • Weight: 1200 kg Insulation: • Roof/Walls: 5 cm PUR (Polyurethane) • Optional: 10 cm insulation available with PUR, PIR, or rock wool • Floor: 16 mm fiber cement board • PVC flooring Features: • 1 room • 1 external door • 2 windows Colors: • Facade color: RAL 9002 Ksdpfx Abjvvygwjnjdr • Frame color: RAL 7016 • Customization: Tailored designs available according to customer preferences High-Quality Craftsmanship for Long-Term Use Stock & Delivery: • In Stock: Same-day shipping • Out of Stock: Production time 2 to 4 weeks depending on the model • Worldwide Shipping: We offer professional shipping to all countries to ensure fast and reliable delivery • Custom Sizes: Products can be manufactured according to specific customer requirements Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen For more information or custom requests, feel free to contact us!

Condition: new, Year of construction: 2025, Currently, we have 3 units of this model available. JCB G45QS Diesel Generator: 44.8 kVA CONSTRUCTION SPECIFICATION ----* Lockable maintenance access doors * Control panel viewing window * High-density fireproof foam * CE pack * Central lifting point * Fork pockets * 12V starter battery * Sump oil drain pump * Socket wrench cover * Deep sea electronics control panel * Bunded base fuel tank TECHNICAL SPECIFICATION * Prime power: 41 kVA * Length: 2250 mm * Width: 840 mm * Height: 1350 mm * Weight: 1070 kg * Total fuel capacity: 77 L * Fuel consumption: 7.06 L/h * Noise level: 66 dB(A) Kjdpfx Abjy Aiqqjnedr ----11917, 11916, 11915 Vehicle number: Errors and prior sale excepted.

Condition: good (used), SUMMER SALE – UNBEATABLE PRICE: €9,900 Please read the technical specifications carefully. If the machine is a worthwhile investment for you, please provide your full details, including a valid telephone number and email address, so that we can prepare a quotation. DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2-axis CNC milling machine With SIEMENS 810 D – ShopMill software (Buffer batteries renewed) Operating hours: 13,020 hours Spindle hours: 1,561 hours Year of manufacture: 2003 Travel distances: X/Y/Z: 350 x 240 x 340 mm Spindle speed, continuously variable: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55/80 Nm max. Universal swivel/rotary table: 400 x 290 mm Kdodpfxexz Rdaj Abnor Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feeds: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotational range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1,750 kg Technical data is non-binding! Accessories/Equipment: Direct linear scale for 3 axes Spindle drive via servomotor with toothed belt 2 gear stages Full-protection enclosure with sliding door Swiveling control panel Coolant nozzles on the vertical head Coolant system Chip tray with coolant tank Electric handwheel Machine feet Machine light Serial RS232C, LAN (RJ45) interface The machine is ideal for prototype construction, toolmaking, training, mechanical workshops, and weapons manufacturers, etc. It is characterized by its versatility, with the additional manually operated rotary/swivel table, which allows for 5-sided machining. Condition: good to very good, from a vocational training center; see pictures. Can be tested under power.

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: white, overall weight: 1,500 kg, maximum load weight: 1,500 kg, empty load weight: 1,500 kg, loading space volume: 38 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer Modell Sun-1, Office containers | Living containers | Construction containers | Model SUN-1 240cm x 600cm | High-quality and flexible solution Available products can be viewed and collected directly from our warehouse. Our office and living containers offer an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical details Dimensions: • Width: 240 cm • Length: 600 cm • Height: 250 cm Insulation • Ceiling/Wall: 60mm PUR (polyurethane) • Optional: 100mm insulation with PUR, PIR, or mineral wool available • Floor: 16 mm fiber cement board + PVC covering High-quality workmanship for long-term use Equipment: • 1 room • 1 exterior door • 2 windows • High-quality window and glazing systems from REHAU for optimal thermal insulation and durability Colors: • Facade color: RAL 9002 • Frame color: RAL 9002 • Customization: Individual design according to customer requirements possible Stock & Delivery: • In stock: Shipped the same day Kodezvp Tpopfx Abnodr • Not in stock: Production time, depending on the model, 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. Custom dimensions: Products can be manufactured according to the specific requirements of the customer. Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen We are happy to provide you with further information or customized solutions!

Year of construction: 2020, condition: used, overall weight: 90,000 kg, total length: 9,500 mm, total width: 10,000 mm, total height: 7,000 mm, The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control), AVD (Active Vibration Damping), and CTC (Cross Talk Compensation). These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. The equipment includes a direct-drive NC rotary table Ø 3,500 mm with a table load capacity of up to 15,000 kg. The custom rotary table plate is equipped with 16 AMF zero-point clamping modules, enabling short setup times and flexible workpiece clamping. The machining center features an 80-tool magazine with HSK-A100 tool holder and an additional 3-tool pick-up magazine for large tools. A BLUM laser system for tool measurement and a wireless 3D probing system support automatic setup and monitoring of machining. Additional equipment includes two Barberis chip conveyors, a 2,500-liter coolant processing system with drum filter, oil separator, and coolant cooling, automatic front doors, a camera system for workspace monitoring, a wireless handwheel, and the Breton Smart Start & Stop energy-saving system. Control ON: 21,347 hours Machine ON: 13,503 hours Kdjdpfxozknwcj Abnsr Program runtime: 5,812 hours Spindle runtime: 5,740 hours Travel X-axis: 4000 - mm Dimensions (LxWxH) approx.: 9500 x 10000 x 7000 mm Travel Y-axis: 4000 - mm Tool Changer: Yes Weight approx.: 90,000 kg Control: HEIDENHAIN iTNC 640 HSCI Travel Z-axis: 1300 - mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, mileage: 288,370 km, power: 132 kW (179.47 HP), first registration: 05/2003, overall weight: 7,490 kg, fuel type: diesel, color: red, next inspection (TÜV): 02/2027, gearing type: mechanical, emission class: euro3, total length: 6,700 mm, total width: 2,280 mm, total height: 2,830 mm, number of seats: 6, Equipment: ABS, Very nice fire engine TSF-W M.A.N 8.185 4x2 double cab with 4 doors First registration: 12.05.2003 288,370 kilometers ABS 6-speed manual gearbox Cruise control Roof hatch Heated exterior mirrors 100 L fuel tank Wheelbase: 3,900 mm Kodsx U Nv Rspfx Abnsdr Tires: 235/75 R 17.5 M&S Towing equipment: ball head Towing device: Rockinger with 2-line brake system Double cab with 4 doors 6 seats 2 fittings for breathing apparatus Superstructure by TOMA, year of construction 2011 Water tank approx. 800 liters Pneumatic TEKLITE light mast 4 spotlights (24 Volt) Hose carrying baskets 4-section ladder JOHSTADT EL 200 FPN 5-200 pump, year 2011, driven by B&S engine type 6.5 205 cc petrol Differential taxation according to § 25a.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A050694, total length: 4,500 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 850 kg, height adjustment type: mechanical, input voltage: 400 V, extraction connection diameter: 160 mm, input frequency: 50 Hz, grinding width: 140 mm, Grinder for narrow surfaces with the possibility of milling edges and grinding them. At the beginning there are two sanding units with oscillation and 160 mm wide belts, i.e. pre-sanding followed by smoothing, then two units milling the edges from above and below, equipped with cutters for rounding edges r-6 mm and further two units sanding with narrow belts after milling at the end, also with oscillation, and the last seventh unit with a brush wheel for smoothing. The machine is suitable for sanding wooden parts of solid wood and MDF boards, such as countertops of various types, shelves , elements of stairs, doors, windows and other various types of furniture and wooden construction elements. Ready to work possibility to check and start on site. Equipped with several sanding tapes and some parts. Kdjdpfx Absuynnusnor