Used Horizontal Machining Centre for sale (64,794)

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 3755 mm Measurements depth 2300 mm Measurements height 2610 mm Machine weight 9600 kg Main Drive Spindle speed range 14000 rpm Tool taper 7/24 Taper No. 40 Number of axis 4 Movement X-Axis Movement 560 mm X-Axis Rapid Traverse 50000 mm/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 50000 mm/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 50000 mm/min Table Outer length 400 mm Outer width 400 mm Kdodpfxoxya Dgs Ag Asw Table load 400 kg This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2006 and features a horizontal machining centre with only 1,300 hours on the main spindle, which was overhauled in April 2022. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI NH 4000 DCG machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2007, Doosan ACE-HM630 Horizontal Twin Pallet Machining Centre. Serial No. HM630262 (08-2007) with Fanuc Series 18i-MB Control, Pallet Size, 630mm x 630mm, Travel X/Y/Z = 1000/800/850mm, Full B Axis, 40 Position ATC, Spindle Taper ISO50, High Pressure Coolant, Filtermist Kdjdpfx Asxvz Ufog Aew Location: These lots are located in Middlesborough, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 28,349 h, Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper HSK 63 This 3-axis HELLER MC 12 horizontal machining center was manufactured in 2004. It features a tool holder with HSK 63, a hydraulic workpiece clamping system at 60 bar, and a spindle speed of 12,000 rpm. The machine includes a 42-position tool changer and an NC rotary table. If you are looking to get high-quality milling capabilities, consider the HELLER MC 12 machine we have for sale. Contact us for more information about this machine. Kdedpfxjxyaz Ej Ag Aow Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 6000 mm Measurements depth 5500 mm Measurements height 3000 mm Machine weight 22000 kg Main Drive Number of spindles 2 Spindle speed range 4200–16000 Movement X-Axis Movement 450 mm X-Axis Feed Force 8000 N X-Axis Rapid Traverse 60000 mm/min Y-Axis Feed Force 8000 N Y-Axis Rapid Traverse 60000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 8000 N Z-Axis Rapid Traverse 60000 mm/min Ksdexnr D Ujpfx Ag Asdw Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 320 mm This SAMAG MFZ 2-2 was manufactured in 2006. A robust horizontal machining centre, it features a power rating of 72 kW and operates on a 400V mains voltage with a 50 Hz frequency. Weighing 700 kg, it includes optional 3D data for clamping towers and spare parts. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 6110 mm Measurements depth 3380 mm Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Tools Number of station 150 Max weight 25 kg Max tool diameter 140 mm Max tool length 450 mm Type of tool holder HSK 100 This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. Ksdpfx Agexya A Ns Ajdw Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, Main Drive Kodpfxjxx Duao Ag Ajdw Number of axis 4 Spindle Speed 6000 RPM Tool taper HSK 100 Control Unit Brand SIEMENS This 4-axis Burkhardt-Weber MCX 900 was manufactured in 2002. It features a horizontal machining center with a 2-pallet changer, rotatable pallets at the loading station, and a Siemens 840D control. The machine includes a storage rack tool magazine with 264 tool positions and a tool setup station. It offers a spindle speed of up to 6000 rpm and a rapid traverse of 40 m/min in XYZ. Consider the opportunity to buy this Burkhardt-Weber MCX 900 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2009, operating hours: 18,098 h, Movement X-Axis Movement 610 mm Z-Axis Movement 610 mm Y-Axis Movement 510 mm This 4-axis Yida MH-500 horizontal machining center was manufactured in 2009. It features a spindle speed of up to 10,000 rpm, a pallet size of 500 × 500 mm, and a tool magazine with a 40-tool capacity. Ideal for high-precision machining with its LM linear guideways and rapid traverse rates. If you are looking to get high-quality milling capabilities, consider the Yida MH-500 machine we have for sale. Contact us for more information about this machine. Kjdpfxjxx Dvds Ag Aodw Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,458 h, Control Unit Brand FANUC Model oi-F Kdjdpfx Agjxx Dvwj Asw This 4-axis KAFO HMC-500 was manufactured in 2019 and features a robust FANUC 0i-F control unit. With a spindle speed of up to 10,000 rpm and a tool magazine capacity of 40 tools, it ensures efficient machining. The machine has a pallet size of 500x500 mm and a maximum workpiece size of Ø700 mm by 800 mm. Consider the opportunity to buy this KAFO HMC-500 horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 6000 mm Measurements depth 5500 mm Measurements height 3000 mm Machine weight 22000 kg Main Drive Number of spindles 2 Spindle speed range 4200–16000 Movement X-Axis Movement 450 mm X-Axis Feed Force 8000 N X-Axis Rapid Traverse 60000 mm/min Y-Axis Feed Force 8000 N Y-Axis Rapid Traverse 60000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 8000 N Z-Axis Rapid Traverse 60000 mm/min Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 320 mm Kedoxnr Elepfx Ag Aodw This 3-axis SAMAG MFZ 2-2 was manufactured in 2007, featuring a line voltage of 400V, frequency of 50 Hz, and a control voltage of DC 24 V. With a power consumption of 72kW and a weight of 700kg, it includes optional 3D data of the clamping tower. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 10000 kg Ksdpfx Aoxx Dypsg Asdw Movement X-Axis Movement 560 mm Z-Axis Movement 625 mm Y-Axis Movement 610 mm This 4-axis Okuma MA 400 HA horizontal machining center was manufactured in 2005. It features a 400 × 400 mm working surface, 560 mm X-axis travel, 610 mm Y-axis travel, and 625 mm Z-axis travel. The machine supports a maximum table load of 400 kg and offers rapid feeds up to 60 m/min. Consider the opportunity to buy this Okuma MA 400 HA horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 4800 mm Measurements depth 5800 mm Machine weight 12800 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 10000 Spindle motor power 24 kW Number of axis 4 Kjdpfx Aoxxnfvjg Aedw Movement X-Axis Movement 625 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 650 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 650 mm Z-Axis Rapid Traverse 40 m/min Table Table load 4000 kg Tools Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69893-HSK-A63 Media Chip conveyor Yes Additional Equipment Renichaw measuring probe Tool breakage detection: Yes, in tool magazine Flushing gun at the setup station Waterfall shower Paper belt filter Pallet sequential operation Enclosed work area enclosure according to UW Computer connection via Ethernet interface Network connection This 4-axis Starrag Heckert Dynamic CWK 400D was manufactured in 2005. It features a Siemens Sinumerik 840D control system, spindle speeds up to 10,000 rpm, and a dual pallet system with rapid 8-second pallet changes. The machine includes a tool magazine with 60 positions and a high-capacity coolant system. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,804 h, General Data Measurements width 7000 Measurements depth 5000 mm Machine weight 3400 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 8000 Number of axis 4 Movement X-Axis Working Feed 60000 mm/min X-Axis Rapid Traverse 60 m/min Y-Axis Working Feed 60000 mm/min Y-Axis Rapid Traverse 60 m/min Z-Axis Working Feed 60000 mm/min Z-Axis Rapid Traverse 60 m/min X-Axis Movement 600 mm Y-Axis Movement 560 mm Z-Axis Movement 560 mm Table Table load 350 kg Tools Slots in storage 90 Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69871-SK40 Ksdpfoxxnfpsx Ag Aedw Media Chip conveyor Yes Additional Equipment Coolant Type/Content: Emulsion (internal & external) / approx. 1100L Coolant Unit: Knoll with drum filter 30, 40, 50 bar via M-command Machine Accuracy: VDI / DGQ 3441 Renishaw Measuring Probe Tool Breakage Detection Drum filter Pallet Sequential Operation Enclosed Work Area Enclosure Network Connection Technical Documents and Layout Plan available This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 4 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm Kdsdpfx Asxxng Tjg Aow This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, Main Drive Kodsxxngyopfx Ag Asdw Number of axis 3 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 5585 mm Measurements depth 3080 mm Measurements height 3280 mm Machine weight 21000 kg Control Unit Model OSP-E100M Brand OKUMA Main Drive Spindle speed range 20000 rpm Kjdpjxxdrlefx Ag Aodw Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 900 mm Z-Axis Movement 980 mm Media Internal cooling Yes This Okuma MA-500HA was manufactured in 2004. A robust horizontal machining centre, it features a spacious X-axis travel of 700mm, Y-axis of 900mm, and Z-axis of 980mm. It includes a high-speed spindle capable of 20000 RPM and an efficient through coolant pump. For more information about this horizontal machining centre, please reach out to us. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand SIEMENS Model 840D sl Operate with CELOS® Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 660 mm Media Chip conveyor Yes Additional Equipment Tool breakage control system in the tool magazine Two pallets with threaded holes Automatic turning APC with 2 stations Direct distance measuring system Rotating viewing window in the work area door Coolant rinsing gun I/F for oil mist separator Knoll KF110/700 compact filter system Spindle sensor measuring system with optical signal transmission / Cooling unit for spindle Signal light (red, yellow, green, blue) This 4-axis DMG MORI NHX 4000 was manufactured in 2017. A robust horizontal machining center, it features a travel range of 560x560x660 mm and a clamping surface of 400x400 mm. The spindle was completely overhauled in May 2023. It has a tool magazine with 60 slots. The tool Holder is HSK 63 HSK-A63 motor spindle and the spindle speed range is 20 - 20,000 min-1. The machine includes a CELOS® control system with Siemens 840D sl Operate, enhancing usability with a multi-touch screen. For more information about this horizontal machining center, please reach out to us. Application Types Milling Kdodpfx Agsxwz Afj Aew

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HAAS Kdodpfx Aexwzzbog Aew Main Drive Tool taper SK 50 Number of axis 4 Movement X-Axis Movement 1626 mm X-Axis Rapid Traverse 15.2 m/min each Y-Axis Movement 1270 mm Y-Axis Rapid Traverse 15.2 m/min each Z-Axis Movement 814 mm Z-Axis Rapid Traverse 15.2 m/min each Workpiece Workpiece weight 4536 kg Media Chip conveyor Yes Additional Equipment Coolant tank with low and high pressure pumps 2 chip conveyors with screw This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 4210 Measurements depth 6900 mm Measurements height 3400 mm Machine weight 21500 kg Control Unit Brand MAZATROL Model SMOOTH G Main Drive Spindle speed range 10000 Number of axis 4 Movement X-Axis Movement 1050 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 980 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece X 1050 mm Workpiece Y 1300 mm Table Min distance between vertical spindle and table 100 mm Max distance between vertical spindle and table º1000 mm Table load 1500 kg Tools Max weight 30 kg Max tool diameter 125 (250) mm Max tool length 630 mm Additional Equipment Chip Conveyor Tool Presetting Air Blow on the Spindle Remote Handwheel This 4-axis Mazak HCN-6800 horizontal machining center was manufactured in 2016. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this Mazak HCN-6800 horizontal machining center. Contact us for more information. Kedpexmlkxsfx Ag Aodw Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 2700 mm Measurements depth 4200 mm Measurements height 2650 mm Machine weight 11500 kg Control Unit Brand MAZATROL Model PC-FUSION-CNC Movement X-Axis Movement 560 mm Y-Axis Movement 610 mm Z-Axis Movement 560 mm Additional Equipment Maximum Tool Diameter: 150 mm /Maximum Tool Length: 375 mm/ Maximum Tool Weight: 12 kg Tool Capacity: 64 positions This 4-axis Mazak FH-4800 horizontal machining center was manufactured in 2002. It offers robust and precise machining capabilities, ideal for a variety of applications. Consider the opportunity to buy this Mazak FH-4800 horizontal machining center. Contact us for more information about this machine. Application Types Milling Kedjxwzx Hspfx Ag Aedw

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 5584 mm Machine weight 16000 kg Measurements height 3342 mm Measurements depth 3693 mm Control Unit Brand FANUC Main Drive Number of axis 4 Tool taper BT 50 Spindle Speed 10000 RPM Movement X-Axis Movement 900 mm Z-Axis Movement 1020 mm Y-Axis Movement 800 mm Kdjdpfxoxl H A Te Ag Aew Tools Number of index 40 or 60 Max tool diameter 115 mm Max tool length 600 mm Max weight 30 kg This 4-axis Makino a81 horizontal machining center was manufactured in 2011. It features a robust 630×630 mm pallet, capable of handling a maximum load of 1200 kg, and a spindle speed range of 20−10000 min−1. The machine offers a rapid traverse rate of 50000 mm/min, enhancing productivity. Ideal for complex machining tasks, consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, Main Drive Spindle speed range 16000 Tool taper HSK-63A Tools Number of index 120 This HELLER MC 16 with pallet pool was manufactured in 1999. It features a Control Uni Pro system, a 120-tool magazine, and an HSK-63A tool holder. The spindle operates at a speed of 16,000 rpm. Consider the opportunity to buy this HELLER MC 16 horizontal machining centre. Contact us for more information. Application Types Kdedpfexu Rvvox Ag Aew Milling

Condition: ready for operation (used), Year of construction: 1999, Main Drive Spindle speed range 10000 Number of axis 4 Tools Number of index 160 Type of tool holder HSK-63A This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Kodpfx Agjxu Rwae Aedw Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand SIEMENS Main Drive Kdodpfxoxuay Ds Ag Asw Spindle speed range 10000 Spindle motor power 17 kW Number of axis 3 Additional Equipment Scraper belt conveyor for dry machining Cold light in the work area Central cooling unit for motor spindle and control cabinet, CFC-free This 3-axis HELLER MC 2000 was manufactured in 2011 and features a robust three-phase motor spindle, delivering 17 kW at 10,000 rpm with a SK 40 tool holder. It includes a 2-axis servo tool changer, a stationary tool magazine with 54 positions, and a pallet changing device with 2 pallet positions. If you are looking to get high-quality milling capabilities, consider the HELLER MC 2000 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,000 h, Control Unit Brand SIEMENS Model 840D Tools Type of tool holder SK 40 DIN 69 871 Additional Equipment Operating voltage: 400 V, 50 Hz Kedpfxoxuaxtj Ag Asdw This HELLER H2000 was manufactured in 2017. It features a robust SIEMENS 840D solution line control system and a tool magazine with 80 positions. The machine includes a NC rotary table and a coolant purification system with a 50 bar internal supply. Ideal for precision machining with its advanced spindle technology and 3,000 operating hours. Consider the opportunity to buy this HELLER H2000 horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand MAKINO Model Pro5 Main Drive Number of axis 4 Table Table load 1200 kg Tools Max weight 20 kg Max tool diameter 100 mm Max tool length 690 mm Additional Equipment Spindle cooling Tank system with Knoll compact band filter, 3200 liters Coolant supply through the spindle Kdsdpoxtgm Iefx Ag Asw Oil mist extraction Scraper belt conveyor Conversion kit for stand-alone operation (currently used as a system machine) This 4-axis Makino a81 horizontal machining center was manufactured in 2008. It offers robust capabilities for precision machining. Consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information. Application Types Milling