Horizontal Machining Centre

DOOSAN HM 6300

Condition: ready for operation (used), No 2 - USED- 4-AXIS HORIZONTAL MACHINING CENTRES WITH MULTIPALLET SYSTEM X-AXIS TRAVEL: 1200 - 1460 mm Y-AXIS TRAVEL: 800 - 1000 mm Z-AXIS TRAVEL: 1200 - 1200 mm RAPID FEEDS X-Y-Z: 36 m/min SPINDLE: 25 - 6000 rpm; 900 - 1130 Nm; ISO 50 - DIN PALLET: N.18+N.12 ; 800X630 + 1000X800 mm; 15 rpm MAX ADMITTED LOAD: 1800 - 4500 Kg MAX MACHINABLE PIECE DIMENSIONS: 1250X1250X1400 - 1700X1350X1400 mm TOOL MAGAZINE: CHAIN-TYPE ; 300 POS MAX TOOL DIAMETER: 125 (250) mm MAX TOOL LENGHT: 650 mm MAX TOOL WEIGHT: 40 Kg CONTROL UNIT: SIEMENS 840 D OVERALL DIMENSIONS: 10000 x 6000 x 3800 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; Dwsdpfjn Ny A Dox Ab Tef PAPER FILTER ; TOOL SETTER NOTE: LINEAR MULTI-PALLET SYSTEM LPP WITH No 30 PALLETS AND No 2 LOADING AND UNLOADIND STATIONS; 290 yom 2009, 2.500Kg; 230 yom 2008, 1.200Kg.

Condition: excellent (used), Kitamura HX630i Horizontal Machining Center Year of manufacture: 2010 Control: Fanuc 16i-MB Travel paths: X: 1000 mm Y: 800 mm Z: 820 mm Dwjdpjxx Drxjfx Ab Tjf B axis: 0.001° Table size: 630 mm x 630 mm Spindle: 12,000 rpm Tool changer: 50 positions Tool holder: BT50 The machine is in very well-maintained condition.

Condition: used, Year of construction: 2005, Technical details: x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm B-axis (table): 360° size of pallet: 1000 x 1250 mm workpiece swing dia.: 2100 mm workpiece weight: 3500 kg spindle taper ISO: 50 spindle drive motor: 37 kW spindle turning speed range: 25 - 10000 U/min feed range: 40/50 m/min rapid power traverse circular: 10 U/min total power requirement: 90 kVA weight of the machine ca.: 43 t Dwodpfovgcrkex Ab Tsf dimensions of the machine ca.: 11 x 9 x 4,5 m Machine with SIemens 840 D control for 4 axis - full B-axis - palette changer - tool changer for 150 tools - coolant device with coolant through spindle - chip conveyor *

Condition: used, Year of construction: 2011, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, controller manufacturer: Fanuc, controller model: i 31A, workpiece weight (max.): 2,200 kg, table width: 800 mm, table length: 800 mm, table load: 2,200 kg, spindle nose: MAS BBT 50, CNC Control MSX-701 lV (Fanuc i 31A) Pallet table size 800 x 800 mm Number of pallets 2x Table load 2200 kg Movement X-axis 1400 mm Movement Y-axis 1200 mm Movement Z-axis 1350 mm Table indexing 0,001° Spindle Taper MAS BBT 50 Spindle Speed 10 -8.000 R/min Spindle motor 37/30 kW Magazin capacity 100 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Dedsxnmftspfx Ab Tswf

Condition: excellent (used), Year of construction: 2004, Used Kia Model Kia Centre H63 Twin Pallet Horizontal Machining Centre with 60 Station ATC and Fanuc 18M Control. Serial Number KH630216. Year of Manufacture 2004. MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle • Shuttle Type Pallet Changer • Pre-Tensioned Double Anchored Ballscrews • Fanuc 18M Control with 15 Inch Colour Screen • 20 Bar ‘Cool-Jet’ Through Spindle Coolant • Set of BT50 Toolholders • Filtermist FX5002 Mist Filtration • Frontal and Side Operators Platforms TABLE Dwsdpfsu A Ut Nex Ab Tsf Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM 0bwkk Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper NT #50 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEARED HEADSTOCK FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type BT #50 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415V / 3PH / 50HZ MACHINE Floor Space (L x W) 3,610 X 5,320 MM Height 3,140 MM Weight 14,000 KGS

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller model: Mazatrol 640M, table width: 800 mm, rotational speed (max.): 7,000 rpm, spindle speed (max.): 7,000 rpm, coolant supply: 50 bar, number of slots in tool magazine: 40, tool length: 500 mm, tool diameter: 200 mm, tool weight: 35,000 g, MAZAK FH8800 Djdpsxw Ht Nofx Ab Tewf

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 3415 mm Djdpfxjx D Svve Ab Tswf Measurements depth 6015 mm Measurements height 3500 mm Movement X-Axis Movement 1050 Y-Axis Movement 920 Z-Axis Movement 960 A-Axis Movement +30°～-120° B-Axis Movement ±360° Table Outer length 630 mm Outer width 630 mm Media Chip conveyor Yes Additional Equipment Tool Magazin: ATC 240 positions Air Cleaner: AR Filtrazioni Equipment: Chip conveyor, Laser tool presetting This 5-axis Matsuura MAM 72-100H was manufactured in 2016, offering advanced capabilities for efficient and precise machining. Ideal for complex parts, this horizontal machining centre is a robust addition to any production line. Consider the opportunity to buy this Matsuura MAM 72-100H horizontal machining centre. Contact us for more information. Application Types Milling