Used center lathes 300-399mm turning diameter over bed for sale (186)

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter over bed slide: 320 mm, turning length: 910 mm, total length: 700 mm, total width: 1,610 mm, total height: 1,350 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 65 rpm, metric thread diameter (max.): 6 mm, metric thread steps: 23, overall weight: 272 kg, three-jaw chuck diameter: 160 mm, The HOBBY 910 G lathe in its standard configuration comes equipped with a leadscrew and feed shaft for threading, as well as for automatic longitudinal and cross feeds. The 12-speed gearbox allows for quick speed adjustment without the need to change the V-belt. Thanks to its compact design and high weight, the machine ensures quiet and highly precise operation. - Easy and quick spindle speed changes via the gearbox - High concentricity due to precision ball bearings - High-power drive motor with high torque, spindle speed range 65 - 1650 rpm Bwodpfxjyn Amne Aknow - Wide scope of use: precision engineering, vocational training centers, educational institutions, etc. - Simple feed adjustment mechanism, smooth and precise switching - Rigid machine bed with induction-hardened and ground guideways - Optimally suited for machining steel, non-ferrous metals, and plastics - Standard equipment includes a leadscrew for automatic longitudinal and cross feed - Saddle with handwheels with precision dials Centre distance: 910 mm Centre height: 160 mm Swing over bed: 320 mm Bed width: 160 mm Spindle bore: 38 mm Spindle taper: MT 5 Spindle speed min.: 65 rpm Spindle speed max.: 1650 rpm Speed change - number of steps / stepless: 12 Longitudinal feed range: 0.087 – 2.049 mm/rev Cross feed range: 0.019 – 0.444 mm/rev Metric thread: (23) 0.25 – 6 mm Imperial thread: 4 – 120 TPI Tailstock quill travel: 75 mm Tailstock taper: MT 3 Motor power: 1.5 kW Continuous motor power S1 100%: 1.1 kW Voltage: 230 V Dimensions (W): 1610 mm Dimensions (D): 700 mm Dimensions (H): 1350 mm Weight approx.: 272 kg Scope of supply: - 160 mm 3-jaw chuck - Cross slide - Fixed centres - Change gears - 4-way tool post - LED work lamp - Chuck guard - Chip tray - Leadscrew cover - Service tools - Stand

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 264 mm turning length 1000 mm turning diameter in the gap 550 mm turning speeds 44 - 2000 U/min centre height 200 mm spindle bore 52 mm Bwsdpfjupxrhsx Aknsw tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 1,5 / 2,4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools

Condition: new, neu Bulgarien 26210 € 500.61 € 325 mm 750 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 MK 2 85-405; 470-2200 U/Min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 0.1 - 1.75 70 - 4 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm Bodpsyq Sngjfx Akneww € 26.730,-

Condition: good (used), Tovaglieri parallel lathe Bedpfx Askt U E Ijkneww Used, originally from a school. In excellent condition. Center height: 180 mm. Distance between centers: 700 mm. Bar capacity: 45 mm. Included accessories. No. 4 available, subject to prior sale.

Condition: new, Bernardo Standard 165 D Lead and Feed Lathe Technical Specifications Distance between centers: 1000 mm Distance between centers over bed: 350 mm Distance between centers over cross slide*: 450 mm Distance between centers over compound slide: 190 mm Bed width: 180 mm Spindle bore: 40 mm Spindle mount: DIN 55029, D1-4 Speed range: (8) 70 - 2000 rpm Range of longitudinal feeds: (40) 0.053 - 1.29 mm/rev Range of cross feeds: (40) 0.013 - 0.31 mm/rev Metric threads: (32) 0.4 - 7 mm Inch threads: (36) 4 - 60 TPI Tailstock travel: 110 mm Tailstock mount: MK 3 Motor output power: S1 100% 1.5 kW (400 V) Motor input power: S6 40% 2.2 kW (400 V) Machine dimensions (W x D x H): 1730 x 700 x 1340 mm Weight approx.: 514 kg * Bed length can be extended Scope of delivery • 3-axis digital display i200 with LCD • 3-jaw chuck DK11-160 mm / D4 • Faceplate 200 mm / D4, according to DIN 55029 • Fixed steady rest – bore diam. max. 60 mm • Follow rest – bore diam. max. 60 mm • Clamping plate 250 mm • Four-way tool holder • Shaft locking device • Protective device for tool holder • Slip clutch Bjdpfxod Ri Ezo Aknjww • Micrometer length stop • Coolant system • Extendable chip tray • Motor with magnetic brake according to CE standard • Foot pedal with braking function according to CE • Splash guard • Threading dial • LED machine light • Reducing sleeve • Change gears • 2 centering points • Base frame • Operating tools

Condition: new, Bernardo Master 180 Lathe with Lead and Feed Screw including 3-axis digital display Distance between centers: 1000 mm Swing over bed: 180 mm Swing over cross slide: 360 mm Swing over compound rest* : 480 mm Swing over carriage: 220 mm Bed width: 185 mm Spindle bore: 51 mm Spindle mounting: DIN 55029, D1-5 Speed range: (8) 70 - 2000 rpm Range of longitudinal feeds: (32) 0.052 - 1.392 mm/rev Range of cross feeds: (32) 0.014 - 0.380 mm/rev Metric threads: (26) 0.4 - 7.0 mm Inch threads: (34) 4 - 56 TPI Tailstock diameter: 42 mm Tailstock travel: 110 mm Tailstock mounting: MK 4 Motor output power S1 100%: 1.5 kW (400 V) Motor input power S6 40%: 2.2 kW (400 V) Machine dimensions (W x D x H): 1920 x 750 x 1600 mm Weight approx.: 540 kg * Removable bed extension: 225 mm Scope of supply • 3-axis digital display i200 with LCD screen • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, according to DIN 55029 • Fixed steady rest - bore diameter max. 70 mm • Traveling steady rest - bore diameter max. 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Removable chip tray • Clamping plate 320 mm • Four-position tool holder • Safety device for four-position tool holder • Slip clutch • Micrometer length stop • Thread dial • LED machine lamp • Reducing sleeve • Change gears • 2 centering points • Foot pedal with braking function according to CE Bsdpfxsd Du Tis Aknoww • Motor with magnetic brake according to CE standard • Base frame

Condition: new, Precision guide and lead screw lathe Manufacturer: GDW Model: LZ 280 VS-G basicline Condition: New machine with stepless feed rate control meeting the highest safety standards Center height: 165 mm Distance between centers: 670 mm Spindle bore: 43 mm standard equipment: GDW control panel with feed rate potentiometer - Display of travel direction - Display of spindle speeds - Teach-in for travel distance during thread cutting - Input of feed rate and thread pitch - Thread pitches: Metric, Inch, Module, DP GDW 3-axis positioning display - 6" TFT color display - Radius/diameter display - Tool memory for 100 tools - Switching mm/inch - Axis coupling Z/Zo - Taper calculation - Calculator - Graphical input assistance - USB port - Automatic standby mode also included as standard: - LED machine light, integrated in the machine housing - Quick-change tool holder size A with turning tool holder - Lead screw shut-off with key - Braking system for main drive - Chuck guard, adjustable with limit switch monitoring - Chip guard back panel, removable - Splash guard, adjustable Bjdpfxsfbmlij Aknsww - Chip tray, pull-out - Simple steady rest (fixed steady rest, longitudinal) - Central lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protection flange for spindle head DIN 55027-5 - 2 fixed centers DIN 806-MK 3 - Set of operating tools with tool bag, set of wrenches, oil pump - 5 spare shear pins - 2 operating manuals with parts lists, electrical documentation

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 264 mm turning length 1000 mm turning diameter in the gap 550 mm turning speeds 44 - 2000 U/min centre height 200 mm spindle bore 52 mm tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 1,5 / 2,4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light Bwjdpokxhqvsfx Aknow machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools

Condition: new, Precision guide and lead screw lathe Manufacturer: GDW Model: LZ 280 VS comfortline Condition: New machine with stepless speed control and stepless feed rate control according to the highest safety standards Center height: 165 mm Distance between centers: 670 mm Spindle bore: 43 mm standard equipment includes: The base price already includes the latest display generation "comfortline", which incorporates many new features and improvements: - 9'' TFT color screen - Technology memory for 99 tools Bwodpocunqgofx Aknsw - Spindle positioning via teach-in button - Input of constant speed or constant cutting speed (V = c) - Speed limitation can be selected - Error and status display in plain text - Feed rate and thread pitch input via image-supported menus - When cutting threads, there is no need to change or even purchase additional gears to be able to cut all common threads! In addition, the standard equipment includes: - LED machine light, integrated into the machine housing - Quick-change tool holder, size A, with turning tool holder - Lead screw disengagement with key - Braking system for main drive - Sliding chuck guard with limit switch monitoring - Removable chip guard at the rear - Movable splash guard - Pull-out chip tray - Simple bed stop (fixed stop, longitudinal) - Central lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle head, DIN 55027-5 - 2 fixed centers, DIN 806-MK 3 - Set of operating tools with tool bag, set of keys, oil can - 5 spare shear pins - 2 operating manuals with parts lists, electrical documentation

Condition: new, Lead and feed spindle lathe Manufacturer: ROMI Model: T240 x 1000 Condition: New machine Center height: 220 mm Distance between centers: 1,000 mm Standard equipment: Bjdpob Suakofx Aknjww - 3-axis digital display FAGOR Innova 30i-T - Coolant system - Bed stop for automatic shutdown - Quick-change tool holder base, size B - Operating manual

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swinging diameter over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2000 rpm Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Cross feeds X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER Bjdpfx Ajir Igwoknjww - Overload protection for feed drive - Pulse button for main spindle - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard - 3-jaw chuck - 4-way tool holder - Foot pedal with mechanical braking device - Coolant system - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment in accordance with CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix Also available as a geared version.