Used Laser Cl 500 for sale (19,657)

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Ijdpfxsz Eu Syo Ahyebc Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Iodezdqkropfx Ahyobc Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2017, Sieving machine- 2017 Mobile Concept Laser QM Powder With Siemens PLC Powder Handling Unit - Iedpfjz N H Atjx Ahysbc

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Ibodezt A H Rspfx Ahyjc Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Year of construction: 2017, condition: ready for operation (used), laser power: 600 W, Automation system manufactured in 2017. This CLEANLASER CL 600 features a laser wavelength of 1064 nm. With 3 units available, this system is designed for precision applications. If you are looking to get high-quality automation capabilities, consider the CLEANLASER CL 600 machine we have for sale. Contact us for further details. - 3 units available- Main Laser System Model: CL 600- Laser Power (max. av.): 600 W- Wavelength: 1064 nm- Pulse Frequency: 20-40 kHz- Pulse Duration (min.): 45 ns- Pulse Energy (max.): 33 mJ- Laser Safety Class: Class IV Laser Product- Main System Power Supply: 3x400 VAC, N, PE- Main System Frequency: 50 Hz / 50/60 Hz (correspond to separate units)- Main System Power Consumption: 10 kVA- Optic System Model: intelliSCAN 30- Optic Wavelength: 1064 nm- Optic Work Distance: 250 mm- Hydraulic Pump Drive Motor Brand: Leroy-Somer- Hydraulic Pump Drive Motor Weight: 490 kg- Hydraulic Pump Drive Motor Output: 90 kW (50 Hz, 1460 min-1) / 103 kW (60 Hz, 1780 min-1)- Hydraulic Pump Drive Motor Voltage / Connection: A380V / A400V / Y690V (50 Hz), A415V / A440V / A460V (60 Hz)- Hydraulic Pump Drive Motor Rated Current: 170A / 162A / 94A (50 Hz), 159A / 168A / 161A (60 Hz)- Hydraulic Pump Drive Motor Protection Class: IP 55- Hydraulic Pump Drive Motor Max Ambient Temperature: 40 °C- Hydraulic Pump Brand: Brueninghaus Hydromatik GmbH (The Rexroth Corp.)- Hydraulic Pump Displacement (Vg): 125 cc- Hydraulic Pump Nominal Speed (n): 1800 rpm- Hydraulic Pump Pressure (DR): 276 bar- Hydraulic Pump Fluid Type: mineraloil- Package sale possible (, ) Ibjdpfx Asz Aq Hqjhyoc

Condition: used, Year of construction: 1997, KP03 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1997 Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Ibjdpfx Ahozxq N Djyec Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco used

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Ijdpoz Rzikofx Ahyebc Model: Trumatic Lasercell 1005 (Type TLC 1005) Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Price negotiable Dismantling and transport preferably carried out by the buyer

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Plockmatic SD-500” booklet-making system Item for sale: 1 x Plockmatic SD-500 with the following equipment: incl. SD BM Booklet Maker incl. SD-BF Bookfold incl. SD RCT Rotate Crease Trim incl. SD-BF Bookfold price new over 60.000€ net Meter readings: Total: Approx. 4187 Ibsdpfx Ahszz Rp Aoysc Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Cuts materials up to 6000 mm in length. Can automatically cut an entire profile into smaller pieces. Length, cutting angle, and material thickness are electronically adjusted on the machine. The saw system is in perfect working order. Iedpfjx U Df Hex Ahyjbc For sale due to production shutdown. We are happy to assist with loading the machine onto the buyer's truck.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, number of tool turrets: 1, Note: This offer concerns the assignment of the leasing agreement. Narran ROD 500W pulsed laser cleaning system, IPG Photonics source. The unit is in very good condition. Technical specifications: - Average power - 500 W, - Peak power - 2.5 MW, - Wavelength - 1064-1070 nm, - Frequency - 2-50 kHz, - Fiber optic cable length - 10 m, - Head weight - 1.5 kg, - Dimensions - 1.4 x 0.6 x 1.1 m, - Unit weight - 195 kg, - Rated power - 3.5 kW, - Power supply - 220/230 V (16A). In addition, the following will be included with the unit: - TBH LN 265 filter – high-efficiency dust extraction system in a compact and mobile design; - Exhaust fan with extraction hose and nozzles; - Special safety glasses for laser operation – 6 pcs; - Interchangeable lenses for the working head; - 3M mask/face shield; - Protective screens to demarcate the work area; - PL and EN manuals, PL operating instructions, and workstation instructions; - Domain name, website, and email address. The leasing is managed by mLeasing Sp. z o.o. (mBank group). When submitting an inquiry, please provide the following: - EU VAT number, - Full company name, Iedjx Ezw Uspfx Ahyebc - Company address, - Name of the person representing the company, their email address, and direct phone number. Based on this information, we will submit a request for the assignment, and mLeasing will contact the interested party directly. The stated price is the sum of the net principal payments, excluding any additional costs, and is for informational purposes only. The offer does not include an assignment fee.

Condition: used, 3D MICROMAC Type: microCUT laser marking system microCUT Enclosure IPG laser source Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Ijdpfx Ahozdqp Ijysbc Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60Hz Power consumption 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Setpoint tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Setpoint tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous Wavelength 1070nm Power 5kW Frequency 5 kHZ Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Working pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: microCUT laser marking system Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1998, machine/vehicle number: 098211, KP09 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1998 Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco Iedjzxq Uyepfx Ahyobc

Condition: good (used), Haas-Laser HL 1203D Ijdexam Ryepfx Ahyjbc Optical system: 22-31-21-BX Laser class 4 1500 W 1064 nm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT. Ibjdpfoz A A Iwex Ahyjc

Year of construction: 2023, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Typ / Modell: NF-LC-M 500, Type / Model: NF-LC-M 500 Laser power: 500 watts Spot mode: Multi Water-cooled Max. pulse energy (mJ): 15 Working distance / scan width: 185 – 438 mm / 105 – 300 mm 20 µm rust removal (m²/h): 13.9 20 µm oil contamination removal (m²/h): 15.3 20 µm paint / coating removal (m²/h): 10.5 Ibjdpfxjzq H Uaj Ahysc 5 µm galvanized sheet removal (m²/h): 2.0 Removal of surface contaminants (m²/h): 16.2 Automotive paint removal (m²/h): 2.2 Power consumption: 3 kW Voltage / Hz: 230 V / 50 Hz Dimensions (cm L x W x H): 95 x 61 x 103 Weight (kg): 177

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System Ibsdpfxez Aha Ij Ahyoc • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Complete laser system for integration as individual components, consisting of the following modules: - Special item: Low-power laser production Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and main switch in the front door, tested according to DGUVV3 Ibsdpfxjzl Slye Ahyoc Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics Ibsdpfx Ahoz Ahccjyjc • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-PhaseAdditional photos are available upon request.

Condition: good (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: automatic, laser source manufacturer: IPG, laser source model: YLS-6000, laser power: 6,000 W, laser wavelength: 1,070 nm, positioning speed: 350 m/min, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, safety light barrier, TECHNICAL DETAILS General Information Manufacturer: EAGLE Model: iNspire 1530 F6.0 Machine Type: Laser Cutting System Weight: 18,000 kg Laser Source Laser Source: IPG Fiber Laser Laser Power: 6 kW Working Area and Travel Ranges Working Area: 3,000 × 1,500 mm X-Axis: 3,060 mm Y-Axis: 1,540 mm Z-Axis: 120 mm Dynamics and Positioning Maximum Cutting Speed X/Y/Z-Axis: 150 m/min Cutting Speed with Simultaneous Axis Movement: 280 m/min Positioning Speed: 280 m/min Acceleration: 60 m/s² Acceleration: 6 g Minimum Programmable Stroke: 0.001 mm/m Repeatability: 0.03 mm/m Cutting Accuracy: 0.05 mm/m Cutting Capacities Black Steel: 25 mm Stainless Steel: 25 mm Aluminum: 20 mm Brass: 12 mm Copper: 10 mm Pallet Load Maximum Sheet Metal Weight: 1,000 kg Gas Supply Air Pressure: 6 bar Iedez R D Dqspfx Ahysbc Nitrogen Pressure N₂: 25 bar Oxygen Pressure O₂: 10 bar Operating Times Beam Emission Time: approx. 4,400 h Laser Activation Time: 19,855 h Electrical Data Main Power Supply: 400 V / 50 Hz Power Consumption: 54 kVA Control Voltage: 24 V Machine Dimensions Length: 1,000 mm Width: 3,080 mm Height: 3,060 mm Cutting Head Overhaul: 9 months ago at the manufacturer EQUIPMENT IPG Fiber Laser Source Linear Motors in All Axes Carbon Crossbeam Composite Body Pallet Changer Various Nozzles Protective Lenses Additional Accessories

Condition: ready for operation (used), Year of construction: 2008, laser power: 115,000 W, number of axes: 3, CO2 laser cutting machine manufactured in 2008. This SEI Laser Paper Blaster 02 features a sealed CO₂ laser with a nominal power of 115 W, designed for paper and cardboard processing. It includes an automatic sheet feeder with a maximum stack height of 350 mm and an integrated conveyor system for efficient operation. If you are looking to get high-quality cutting, marking, and engraving capabilities, consider the SEI Laser Paper Blaster 02 machine we have for sale. Contact us for further details. Laser system • Wavelength: ~10.6 µm • Scanning head: 3-axis galvanometric system • Axes: X/Y via scanning mirrors; Z with dynamic focusing (per optical setup) • Working field: Approx. 200 × 200 to 500 × 500 mm • Processing modes: Cutting, marking, engraving, micro-perforation • Adjustable parameters: Laser power, frequency, processing speedPaper handling • Feeding: Automatic sheet feeder with stack loader • Max stack height: 350 mm • Paper weight range: 120–300 g/m² • Operation: Fully automatic cycle • Transport: Integrated conveyor system Iedsz Hbyyepfx Ahyobc • Output: Automatic sheet discharge and collectionControl and software • Control: PC-basedSafety and extraction • Enclosed laser processing area • Interlocked access doors • Laser safety shutters • Emergency-stop devices • Fume extraction connections (external unit required)Electrical data • Supply voltage: 230 V AC, single phase with neutral and PE • Frequency: 50/60 Hz • Machine nameplate power: 200 W • Machine nameplate current: 1 A

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Isdpfoziwwiox Ahyebc Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Ijdez Ii A Sopfx Ahysbc Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications • Working Area: 2500 mm × 1800 mm • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: o Optical registration camera for enhanced precision o Integrated conveyor system for efficient material handling Ibjdpfswm Nu Dex Ahysc o Modular design allowing up to three tools to operate in parallel

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Ibedpfx Ahjziww Asysc Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Cooling unit: Iedpfx Ahjrq D D Ejyjbc LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available