Used Lasercell 1005 for sale (182)

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to Fodpfx Akozcgtboyspn 10 m.

Condition: like new (used), Year of construction: 2022, Siemens 8DJH LLL gas-insulated medium-voltage switchgear. Never used. Fpjdpsz Nxz Ujfx Akyjn Configuration: LLL - three circuit-breaker feeders. Date of manufacture: July 2022. Country of manufacture: Germany. Nameplate ratings: - Rated voltage: 24 kV - Rated current: 630 A - Rated frequency: 50 Hz - Rated short-time withstand current: 16 kA / 1 s - Rated peak withstand current: 40 kA - Lightning impulse withstand voltage: 125 kV - Power-frequency withstand voltage: 50 kV - Internal arc classification: IAC A FL 16 kA / 1 s - Service continuity category: LSC2 - Insulating medium: SF6 The attached photograph shows the original manufacturer nameplate.

Condition: like new (used), Year of construction: 2024, operating hours: 24 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,970 cm³, rotational speed (min.): 1,500 rpm, type of cooling: water, CHP POWER PLANT fueled by SYNGAS (Woodgas) with electrical capacity 140 kWel and thermal capacity 280kWth Fedpfx Aoz Iyq Tokyjpn

Condition: ready for operation (used), Year of construction: 2007, A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible. Fpjdpfx Aey Ax Tnjkysn

Condition: excellent (used), solid fuel furnace for supplying heat to the drying chamber. production of heating pellets. Fpjdpfxjzn Au Ro Akyjn capacity: 2.5 tons per hour.

Condition: like new (used), functionality: fully functional, Log sorting line with 4 pockets, 2 on each side. Material diameter: 100-500 mm, length: 3-5 m. Accumulation conveyor, 12 m, new. Stepfeeder, new. Receiving conveyor, 10 m, refurbished. Pockets, 13 m, 50% new. ABB and Siemens electronics, new. Hydraulic system, new. Fsdpfsz Dtchsx Akyopn

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm Fodpsya Dz Dofx Akyopn - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm - Top slide width: 200 mm - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs, on a solid base cabinet with drawers -Length: 1500mm -Width: 1005mm -Plate: with support ribs -Base cabinet: 3 cabinet doors, pull-outs see photos -Total dimensions: 1500/1005/H910 mm Fpodspbigxjpfx Akyon -Weight: 1200 kg

Condition: excellent (used), The milling cutter motor has a power of 37 kW, and the roller drive motor has a power of 4 kW. Fpsdpfx Akozxc Aioyon

Condition: used, TECHNICAL DETAILS - number of hours : 34373 - strokes X x Y x Z : 220 x 120 x 170 [mm] - fixed table size : 350 x 140 [mm] - working feed : 0 - 5000 [mm/min.] - spindle speed : 20 000 [Rpm] - spindle diameter : 60 [mm] - tools type : ISO 25 - changer : RANDOM 20 positions - spindle motor : 1.5/3.4 [kW] - installed power : 6 [kW] - size : 1830 x 1250 x 1750 [mm] - weight : 1 500 [kg] EQUIPMENT - control CNC FANUC 16i - rigid tapping - spindle cooling unit - oil mist extractor Fpedpfx Akjuhbq Noyen - measuring rule on the 3 axis (1/10 [um]) - tools measurer Blum - Humard robotization for parts - 3 R parts cell - lubricating tank with pump

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 1005/40200317/2010, color: grey, macchina perfetta in ogni sua parte, pronta per essere messa in produzione composta da : sfilatore a cassetto / 3 mettifogli dei quali 1 con dischi di lancio 1 sdoppiabile per doppio inserimento inserti, 1 pivottante a 90 gradi per inserimento inserti in linea di senso di marcia, incollatore abbinato ad etichettatrice elettronica per inserimento indirizzi da 1 pollice a 4 pollici da 2 a 4 piste oltre anche per conti correnti, confezionatrice predisposta con apparato stirofilm per riduzione del lasco sacchetto, staker di raccolta e conteggio prodotti con espulsioone laterale e nastro meccanico di uscita prodotto. Fedpfx Aksuxmlioyopn

Condition: excellent (used), Year of construction: 2003, Chain hoist crane, 500 daN, year of manufacture 2003 Fpodpfx Aksxu Ek Uoysn

Condition: used, functionality: fully functional, Well-maintained Roland VersaUV LEJ-640 UV hybrid printer in good working condition. This versatile printer can print directly onto a wide range of rigid and flexible materials, delivering high-quality, vibrant results with Roland's UV-LED technology. Ideal for signage, promotional products, packaging prototypes, displays, and specialty graphics. The printer has had regular professional maintenance throughout its lifetime and has been operated by a single owner since new. It has been carefully maintained to ensure reliable performance and consistent print quality. Key features: UV-LED hybrid printing technology Prints on both rigid and roll media CMYK + White + Gloss capabilities Suitable for a wide range of substrates Regularly serviced and maintained One-owner machine Reliable and proven production printer Available for inspection and test printing. Please contact us for additional information, photos, or pricing. Fpodpszw U Ubefx Akysn

Condition: used, Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: RATM 0445, fuel type: gas, color: silver, power: 132 kW (179.47 HP), output current: 270 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 400 kW (543.85 HP), continuous power (apparent): 187 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 15 units available, MTU, Leroy-Somer based ONSITE ENERGY units. 7 units worked 5 years x approx. 7000 hours yearly. 5 of those overhauled last year. Fodpfsxcvflex Akyopn 8 units worked 2 years x approx. 7000 hours yearly. 3 of those overhauled last year. All units has Leroy-Samer LSAC 47.2 S5 C6S/4 generator. Under separate agreement we can rebuild genset to diesel version. Potentially Leroy-Samer LSAC 47.2 S5 C6S/4 generator can be sold separately.

Condition: good (used), Year of construction: 1992, Travel X/Y/Z: 1000/500/500 mm Control: Heidenhain TNC 415 B Spindle: SK 40 Speed range: 0 - 5000 rpm Coolant device Fpodpfx Akstmtvlsysn Universal milling head Can be swiveled and manually indexed via scale, can be swiveled away for horizontal machining

Condition: like new (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Buy your coordinate measuring machine from the leading specialist in CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and guaranteed ready for use – quality you can trust. General machine data: Machine type: CRYSTA-Apex V9108 Year of manufacture: 2020 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw SP25M with SM modules Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 Fpsdpfxsyvit So Akysn As specialists, we are happy to provide tailored advice to help you find the right machine for your measuring requirements. Worldwide delivery available upon request!

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,005 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 381 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2020 Operating hours: 1,005 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 381 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Fsdpfsz Ikb Aex Akyspn Voltage: 24 V Battery weight: 150 kg Charger: Charger integrated

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,000 h, machine/vehicle number: S1631C0399, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: TRUMPF, controller model: TruLaser Cell 8030, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 8,000 h, laser power: 3,000 W, laser wavelength: 1,030 nm, TRUMPF TruLaser Cell 8030 – 3D Laser – 2017 – 3 kW TruDisk is one of the most advanced and efficient 3D laser cutting machines in the world, widely used in the automotive industry, especially for processing hot-formed stamped components, body parts, rocker panels, and B-pillars. The machine is equipped with a TRUMPF TruDisk 3000 fiber laser (3 kW), offering high cutting quality, process stability, and low operating costs. The system features a 5-axis motion system and a spacious, ergonomic working chamber. Technical Data: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH (Germany) Model: TruLaser Cell 8030 Type: L60 Year of manufacture: 2017 Serial number: S1631C0399 Laser: TRUMPF TruDisk Laser type: solid-state fiber laser Laser power: 3000 W (3 kW) Wavelength: 1030 nm Operation: CNC Controller manufacturer: TRUMPF / Beckhoff Controller model: Beckhoff CX-Series (CX2030 / CX2040, TruControl system) Power supply: 400 V / 50 Hz Connected load: 45 kVA Protection: 3 × 100 A Fpodpfjxxl A Eex Akysn Media: electric + pneumatic (no hydraulics) Motion axes: 5-axis 3D machining Maximum cutting thickness: Mild steel: up to 6 mm Stainless steel: up to 4 mm Aluminium: up to 3 mm

Condition: reconditioned (used), functionality: fully functional, Automatic pointer, completely overhauled. New pneumatic system. Fsdjz D I Skjpfx Akyepn New electrical components. The unit is in working order; a test video is available.

Condition: good (used), machine/vehicle number: 1152, power: 37 kW (50.31 HP), fuel type: electric, overall weight: 1,015 kg, total length: 1,530 mm, total width: 1,005 mm, total height: 1,700 mm, Year of construction: 2005, operating pressure: 8 bar, noise level: 70 dB, pressure (max.): 8 bar, space requirement height: 1,700 mm, space requirement length: 1,530 mm, space requirement width: 1,005 mm, volume flow: 432 m³/h, type of cooling: air, motor manufacturer: KAESER KOMPRESSOREN, Key features: Airflow capacity: approx. 7.2 m³/min Fjdpfxewtmxye Akyspn Operating pressure: up to 8 bar Drive motor: Electric motor with approx. 37 kW power Noise level: around 70 dB(A), enabling quieter operation Additional information: Energy efficiency: Equipped with a control system that optimizes energy consumption Cooling: Uses air cooling to maintain optimal operating temperature Dimensions: (L) 1530 x (W) 1005 x (H) 1700 mm Weight: 1015 kg

Condition: used, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+1275+1005-700-600 RA2499 Technical data: Conveyor length (NL): 2980 mm ( 830 +150 mm arch + 1200 mm riser segment + 800 mm leading ) frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Fodpfx Akjy N E Tboyjpn Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: refurbished (used), functionality: fully functional, Finished product diameter range 40-140 mm Rollers pressure by pneumatic cylinders + spring mechanism Speed regulation by VFD (adjustable) Fpsdpfx Akozv Euvsyjn Different range of size flasks included Machine tool after renovation (partly): Bearing, pneumatic system, gears, axes, rollers. Machine is prepared for transportation and operation.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, number of cylinders: 12, MTU E3042D3, 12V400GS engine Fedpfxjywg Ipe Akyjpn Deeply refurbished, repainted. New cylinder sleeves, new pistons, new oil pump etc. Missing only oil pan.

Condition: used, Proseal PR30 Fjdpfx Asku H Nhekyjpn Very simple compact traysealer with a high output with its rotating table system. Have a look at the video for an impression. More photos and full specifications: /

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TruLaser Cell 3000 Highly dynamic and precise CNC laser machine solid polymer concrete machine body cantilever axes system 800 x 600 x 400mm travel X-Y-axes with linear motors direct absolute measuring system Z axis with linear guides and ball screw drives TRUMPF control based on SIEMENS Sinumerik 840D sl panel PC for process monitoring integrated switch cabinet and cooling unit water-air incl. start-up and instruction TruFiber 400 Laser equipment compl. TruFiber 400 (G2) Single mode fiber laser for industrial use in welding and cutting: laser power: 400W at fiber end beam quality: M2 1.1 laser light cable: 6m LLK-B operation mode: Cw / modulated max. modulation frequency: 50 kHz pilot laser: standard Trumpf coil feeding unit design tube • Clamping and guiding for coil material • Length up to 800mm • Thickness from 0,1mm to 1,9 mm • Width from 40 to 250 mm • Width adjustment with Handwheel Fpedpsyvfuwefx Akyon • Cutted parts guidance in a Boxsystem or a funnelsystem • Pneumatic feeding coil 50mm stroke right • Coil feed control