Used Cnc Turning Centre for sale (15,388)

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Hfsdpfoxl Nfqex Afion Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: excellent (used), Year of construction: 2022, operating hours: 413 h, functionality: fully functional, machine/vehicle number: 3126137, SPECIFICATION Swing over cross slide 419mm Maximum cutting diameter 305mm Maximum cutting length 305mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Hsdoxm U Sxopfx Afisfn Number of turret tool station 12 X axis travel 200mm Z axis travel 406mm Rapid traverse X axis 30.5m/min Rapid traverse Z axis 30.5m/min Approximate weight 2750Kg MACHINE EQUIPPED WITH: - Haas CNC Control system 3 jaw chuck 165mm diameter Parts catcher Hydrafeed Multifeed 65 Barfeed 17 assorted tool holders, 5 of which are new and boxed Interlocked guarding Automatic lubrication system Coolant system Manual Cycle start hours 782 Feed cutting hours 413 NB Current list price new, machine £56,415.00, barfeed £12,000.00 Total £68,415.00 Special Price here at RK International

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Hfedpfxexd Ay Eo Afisn Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2004, ECOCA SJ20MC 3 AXIS CNC TURNING CENTRE MAKE ECOCA, MADE IN TAIWAN MODEL SJ 20MC YEAR 2004 CONTROL FANUC 18-T MAX. TURNING DIA 170.0 mm MAX. TURNING LENGTH 300.0 mm SWING OVER BED 380.0 mm OVER CROSS SLIDE 225 MAX. SPINDLE SPEED 4,500 RPM POWER TOOL SPEED 4000 Hfsdetvav Iepfx Afien SPINDLE NOSE A-5 / A2-6 DRAW TUBE DIA 45 RAPID TRAVERSE RATE X24 / Z24 PLUS VDI20 TOOLING PARTS CATCHER SWARF CONVEYOR POWER TAIL STOCK TURRET TOOLING

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Hfsdpfsuwc T Hex Afisn Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: used, Year of construction: 2013, DMG Mori Seiki CTX Gamma 1250 CNC Turning Centre with DMG CNC Control (Ergoline Siemens), 12 Position Tool Turret, Tailstock, Coolant Tank with Clarifier, DMG Filter Unit, Spindle Speed 2500rpm Max, Machine Weight 17000kg. S/No. 00650000201 (2013) - CE Mark Hedpfx Asxdb Etjfisfn Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Hfodpfewu I Irex Afion Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: ready for operation (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm, Tailstock, 10” Chuck, Swarf Conveyor, Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Ex works - £54,950.00 Hodpfxew Rrzae Afisfn Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, CNC-Turning and Milling Centre - Horizontal / Brand: DOOSAN Type: PUMA 5100 XLYB / Year of construction: 02/2022 (Start-up: 07/2022) Universally applicable, highly stable, horizontal turning centre with high performance. For heavy-duty machining of medium and large parts. Operating hours (August 1st, 2025): 592 h Condition: As new / ready for immediate use. The machine can be inspected by appointment under power. TECHNICAL DATA: - Swing over bed: 880 mm - Swing over saddle: 817 mm - Recom. turning diameter: 380 mm - Max. turning diameter: 550 mm - Max. turning length: 3.040 mm Capacity: - Chuck size: 533 mm - Chuck work weight (incl. chuck): 1.400 kg - Shaft work weight (incl. chuck): 5.700 kg - Bar working diameter: 165,5 mm Power source: - Electric power supply (rated capacity): 68,79 kVA Machine dimensions: - Length: 7.303 mm - Width: 2.632 mm - Height: 2.937 mm - Weight: 16 tons EQUIPMENT: - CNC-Control: FANUC i PLUS - Steady rest, Brand: SMW-Autoblok - Tailstock, MK5 - Tool magazine - Chip conveyor (hinged belt) - Flushing gun - Documentation - CE marking A wide range of additional accessories can be additionally purchased. Hjdpfew Hg Riex Afiofn There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 1999, operating hours: 1,887 h, functionality: fully functional, machine/vehicle number: 142031, spindle speed (max.): 5,000 rpm, Mazak Super Quickturn 200 (1999). Serial Number: 142031. Date: 1999. Hsdpfx Aotz A Dfefisfn Weight: 5000kg/11,000lbs. Mazak tooleye measuring system. Tailstock. Swarf Conveyor. Parts Catcher. 12 Station Turret. Mazatrol PC-Fusion- CNC 640T control panel. Main Spindle Max 5000RPM. Collet Chucks and Collets. Hydrafeed barfeeder NOT included. This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Year 2005 CF03E30096 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Hfedpfsuwn Dkox Afien Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 mm Distance Between Centres - 645 mm Max. Turning Diameter - 260 mm Max. Turning Length - 530 mm Bar Capacity - 52 mm X Axis Stroke - 180 mm Z Axis Stroke - 530 mm Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 Rpm Driven Tool Motor - 1.1/3.7 kW Tailstock Travel - 435 mm Tailstock Quill Travel - 100 mm Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 kW Floor Space - 2360 X 1745 mm Machine Weight - 4300 Kgs Electrics - 415 V, 3 Ph, 50 Hz

Condition: refurbished (used), Year of construction: 2020, WFL Millturn M120X/3000 WORKING RANGE centre distance = 3000mm Swing over bed = 1220mm Swing over slide top = 1140mm Longitudinal travel (Z) = 3330mm Face travel (X) = 920mm Distance spindle nose to tailstock tip = 3812mm ROTATING SPINDLE Spindle head DIN 55026 form size A15 spindle bore 165mm MAIN DRIVE AC-drive with 2-stage gearbox Drive power 100% ED 60kW Max. Spindle speed 1600 1min Max. Spindle torque 100% ED 4472 NM C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Smallest programmable increment 0.001°. Max. Speed 20min-1 Max. Torque on spindle 100% ED Nm 3000 Holding torque of disc brake Nm 6000 Hjdpfswwkvwjx Afiofn FEED DRIVE Cross slide, rotary drilling-milling unit: AC servo drive Feed force longitudinal (Z) kN 30.0 Feed force plane (X) kN 31,5 Feed force Y-axis 55kW kN 25.0 Rapid traverse speed: longitudinal (Z) m/min 15.0 plane (X) m/min 15.0 Y-axis m/min 12.5 Rapid traverse B-axis °/s 90 BALL SCREW LENGTH (Z axis) ø x pitch mm 63X20 PLAN (X-axis) ø x pitch mm 63X10 RIDGE STOCK Quill diameter mm 180 Quill stroke mm 200 Quill force (adjustable) N 5400-40000 Quill with built-in bearing MK 6 TOOL CARRIER (single tool carrier, rotary drilling-milling unit) AC drive, drive power 100% ED kW 55 Spindle speed max. min-1 3200 Max. Torque at spindle 100% ED Nm 730 Travel perpendicular to X/Z plane (Y axis) 55kW mm 650(-300/+350) Tilting angle of the milling spindle (B axis) ° -110/+90 Spindle head for tools according to DIN 69893 HSK-A100 Milling spindle diameter in front bearing mm 130 TEMPERATURE STABILISATION through controlled cooling circuit with compressor - cooling unit EXTERNAL TOOL MAGAZINE: Number of Storage spaces (space-coded) Size HSK100 pcs 90 Max. Tool length mm 500(800) DIMENSIONS Length(max. tool magazine with chip conveyor) m 13 Height m 4,1

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Hjdpfx Asvxmy Nefisfn Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: ready for operation (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Hodpfxjw Rry Ne Afijfn Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001 Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Cost: £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2022, operating hours: 1,920 h, functionality: fully functional, machine/vehicle number: MV0091-004260, travel distance X-axis: 1,000 mm, travel distance Y-axis: 615 mm, travel distance Z-axis: 597 mm, mount diameter: 40 mm, rotational speed (max.): 10,000 rpm, overall weight: 6,500 kg, 4-axis machining center with 32 tool positions Hfedewnn Irepfx Afien

Condition: excellent (used), Year of construction: 2007, Mazak Horizontal Centre Nexus 5000-II Hjdevrdqlepfx Afiefn Year of manufacturer: 2007 Serial Number: 194000 Swarf Conveyor 18000 rpm spindle Mazatrol matrix nexus control panel Renishaw measuring system Tooling and fixtures are included This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Serial number CF02E30091 Year 2005 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Hjdpfxeuwdg Uo Afijfn Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 MM Distance Between Centres - 645 MM Max. Turning Diameter - 260 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X Axis Stroke - 180 MM Z Axis Stroke - 530 MM Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 RPM Driven Tool Motor - 1.1/3.7 KW Tailstock Travel - 435 MM Tailstock Quill Travel - 100 MM Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 KW Floor Space - 2360 X 1745 MM Machine Weight - 4300 KGS

Condition: refurbished (used), Year of construction: 2008, WFL Millturn M120X/3000 WORKING RANGE centre distance = 3000mm Swing over bed = 1220mm Swing over slide top = 1140mm Longitudinal travel (Z) = 3330mm Face travel (X) = 920mm Distance spindle nose to tailstock tip = 3812mm ROTATING SPINDLE Spindle head DIN 55026 form size A15 spindle bore 165mm MAIN DRIVE AC-drive with 2-stage gearbox Drive power 100% ED 60kW Max. Spindle speed 1600 1min Max. Spindle torque 100% ED 4472 NM C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Smallest programmable increment 0.001°. Max. Speed 20min-1 Max. Torque on spindle 100% ED Nm 3000 Holding torque of disc brake Nm 6000 FEED DRIVE Cross slide, rotary drilling-milling unit: AC servo drive Feed force longitudinal (Z) kN 30.0 Feed force plane (X) kN 31,5 Feed force Y-axis 55kW kN 25.0 Rapid traverse speed: longitudinal (Z) m/min 15.0 plane (X) m/min 15.0 Y-axis m/min 12.5 Rapid traverse B-axis °/s 90 BALL SCREW LENGTH (Z axis) ø x pitch mm 63X20 PLAN (X-axis) ø x pitch mm 63X10 RIDGE STOCK Quill diameter mm 180 Quill stroke mm 200 Quill force (adjustable) N 5400-40000 Quill with built-in bearing MK 6 TOOL CARRIER (single tool carrier, rotary drilling-milling unit) AC drive, drive power 100% ED kW 55 Spindle speed max. min-1 3200 Max. Torque at spindle 100% ED Nm 730 Travel perpendicular to X/Z plane (Y axis) 55kW mm 650(-300/+350) Tilting angle of the milling spindle (B axis) ° -110/+90 Spindle head for tools according to DIN 69893 HSK-A100 Milling spindle diameter in front bearing mm 130 TEMPERATURE STABILISATION through controlled cooling circuit with compressor - cooling unit Hfodpsl Smhljfx Afien EXTERNAL TOOL MAGAZINE: Number of Storage spaces (space-coded) Size HSK100 pcs 90 Max. Tool length mm 500(800) DIMENSIONS Length(max. tool magazine with chip conveyor) m 13 Height m 4,1

Condition: ready for operation (used), Year of construction: 1999, Takisawa EX-108 2 Axis CNC Turning Centre FANUC 21i-T Control Max’ Turning Ø 320mm X Axis Travel 180mm Spindle Bore 52mm 12 Station Block Turret 7.5kW Spindle Motor Spindle Range to 3500rpm Tool Setting Arm Collet Chuck Machine Multifeed ML1 Barfeed Separate Transformer Electronic Handwheel Swarf Conveyor Turret Tooling as photographed Year of Manufacture 1999 Hfedpjwnd Iuofx Afijn For sale with Jet Machinery Ltd Jet Machinery Stock No: #78879 Machine Serial Number: NA Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use

Condition: excellent (used), Year of construction: 2007, operating hours: 2,770 h, machine/vehicle number: 199581, Mazak Vertical Centre Nexus 510C-II (2007) 4th axis Serial number: 199581 Low working hours: 2770 Matrix Nexus control Kitagawa 4th axis EIA/Mazatrol Control Mazatrol tool length measuring system Through coolant CAT40 tooling 12,000 rpm main spindle Hfedpfx Ajv D E Iisfijn Full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Year of construction: 2007, condition: refurbished (used), CNC-TURNING-BORING-MILLING CENTRE M35 MILLTURN WITH TAILSTOCK AND CONTROL SINUMERIK 840D PL WORKING RANGE center distance mm 2000 max. turning diameter mm 420 longitudinal travel (Z) mm 2150 cross travel (X) mm 550 distance spindle flange to center mm 2300 turning length mm 2090 URNING SPINDLE spindle head DIN 55026 form A size 8 Hjdsm H Tutspfx Afijfn spindle diameter in front bearing mm 160 spindle bore mm 77 MAIN DRIVE Built in motor drive power 100%(40%) duty cycle kW 29(33) max. speed min-1 4000 max. torque at the spindle 100%(40%) duty cycle Nm 550(630) AILSTOCK - MECHATRONIC Movement via AC-servodrive,mechatronic function Rapid traverse motion m/min 10 Feed force programmable daN 1200 Installed live center MK 5 TOOL HOLDER (single tool holder, Turning-Drilling-Milling Unit) C-drive drive power 100%(40%) duty cycle kW 15(20) speed range max. min-1 9000 max. torque at the spindle 100%(40%) duty cycle Nm 125(165) max. torque at the B-axis Nm 900 travel vertical to the X/Z-plane (Y-axis) mm 250[-100/+150] pivot capability of the milling spindle (B-axis) ° +/-110 tool accommotation suitable size 63 spindle diameter in front bearing mm 80

Condition: excellent (used), Year of construction: 2005, Doosan S400 CNC 2 Axis Turning Centre Fanuc Oi-TC Control Manufactured 2005 Tool Setting Arm 12” 3 Jaw Chuck 12 Station Turret Tail Stock Swarf Conveyor (Not photographed) Tooling as photographed. Bar Capacity 76.5mm Max Cutting Dia. 400mm Max Cutting Length 750mm Spindle Motor Power 22KW Spindle Speeds 3500rpm For sale with Jet Machinery Ltd Jet Machinery Stock No: #78861 Hodpfev Epzpox Afiefn Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: refurbished (used), Year of construction: 2007, turning length: 5,200 mm, turning diameter over cross slide: 1,140 mm, turning diameter: 1,140 mm, spindle motor power: 90,000 W, spindle speed (max.): 1,000 rpm, spindle bore: 245 mm, travel distance X-axis: 920 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 5,370 mm, mount diameter: 100 mm, rotational speed (max.): 3,200 rpm, torque: 730 Nm, spindle nose: B20, Equipment: rotational speed infinitely variable, WFL Millturn M120/5000 CNC TURNING-DRILLING-MILLING CENTER TYPE M120 MILLTURN WITH TAILSTOCK Hfjdeul S Eyspfx Afien AND SINUMERIK 840 D CONTROL SYSTEM

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 Hfsdpfx Aju Hl R Tofisn quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm Hodpfxjxdmgvs Afijfn