Used Milking Parlor for sale (218)

Condition: used, functionality: fully functional, Year of construction: 2018, Item: AL-9288 – Insulated Milk Transport Truck Complete milk transport truck with tank Gusdpfx Aoylpa Ajk Uog Insulated, stainless steel, 15,000 L capacity 4 chambers: 4000 / 2200 / 4400 / 4400 litres MB2558, 6x2 Year 2018, 415,000 km Very good condition, no damage at all and no corrosion on the chassis.

Condition: ready for operation (used), Year of construction: 2000, Continuously adjustable dosing volume: 60-1050ml, length: 1750mm, width: 650mm, height: 1700mm. Equipment: mounted on a stainless steel frame, mobile with four swivel castors, manual feeding and removal of bottles, self-priming, with a dipping device for the filling tube, automatic circulation cleaning, homogenizing and refining of curd possible, usable products: liquid, pasty, cold and hot milk, yogurt, curd, cream cheese, fondue, honey, salad dressings, mayonnaise, jam, cake batter etc. An on-site inspection is possible, not under power. Gusdpfxoy Uyd Ej Ak Usg

Condition: good (used), Item: D-2414-Tank500 Stainless Steel transport tank. Gjdpfsh E Dp Ujx Ak Uoug Single skin, CIP connection Lid Ø 400 mm Dia. Ø950 mm Total H 1500 mm Outlet 2"

Condition: good (used), Item: A-12.000-MKT MKT Cheese PrePress Line in good condition, capacity 12.000 L Guedpfx Akjh E Dpis Ujg Please contact us for more information.

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Gjdpsw Ahg Rofx Ak Uoug Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Year of construction: 2025, condition: used, 5Kg Thermo Scientific™ Tryptone Soy Broth (Soybean Case in Digest Medium EP/USP/BP/JP) (Dehydrated) New in original packaging Dated for use by end January 2026 Representing a price reduction of around 80% from the manufacturers retail price list Soybean Casein Digest (SCD), also known as Soybean-Casein Digest Medium or Tryptic Soy Broth (TSB), is a general-purpose nutrient medium used for cultivating a wide range of microorganisms, including bacteria and fungi. It's especially valuable because it's rich in nutrients derived from enzymatic digests of soybean meal and casein (milk protein) Used By 1. Pharmaceutical Industry - Sterility testing of pharmaceutical products (especially injectables and ophthalmic solutions). - Microbial limit testing of raw materials, finished products, and water. - Environmental monitoring (e.g., surface swabs, air sampling). Gedpfx Akjxv Azgo Ujug 2. Medical Device Manufacturers - Used for sterility testing of surgical instruments, implants, catheters, etc. 3. Hospitals & Clinical Laboratories - For culturing bacteria and fungi from clinical specimens. - Used in blood culture bottles to detect septicemia. 4. Food and Beverage Industry - To test for microbial contamination in food products. - Used for hygiene monitoring in food processing environments. 5. Biotechnology and Research Laboratories - General purpose medium for growing a variety of microbes in research. - Useful in antibiotic sensitivity testing or microbiome studies. 6. Cosmetic Industry - For microbial limit testing and product safety validation.

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 6 kg, first registration: 07/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED STAINLESS STEEL TANK WITH INSULATION, SINGLE COMPARTMENT, FORMERLY USED AS A MILK CONTAINER REF: 26-U-89 TYPE: Stainless steel tank DIMENSIONS OVERALL TANK LENGTH: 3.70 m TANK LENGTH: 3.00 m OVERALL TANK WIDTH: 2.10 m TANK HEIGHT: 1.55 m Gedpfezlu Ttox Ak Usug TOTAL TANK VOLUME: 7,000 liters WEIGHT: 1390 kg COLOR: Steel Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales department for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specializing in trucks, trailers, and demountable equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without demountable cranes. S.E.&O Given the quantity of advertisements and details provided, Aurora encourages you to verify the accuracy of the data with the sales staff.

Condition: good (used), APV Cheese PrePress Type OPD 11,5 in very good condition, capacity 18.000 L. 1 piece with curd distributor. Complete line with all support equipment but without lifting parts!. Gujdpedctzlsfx Ak Ujg

Condition: used, A-0826-Damrow Cheesevat type Double-O 18.000 L Gjdpfoc Nc Duox Ak Uoug Double jacketed, Insulated, Curd master with agitators and control unit.

Condition: not inspected (used), Year of construction: 1995, gabletop filling machine for milk 1000 packs/h Gedpfohx D E Dex Ak Usug 0,25 L / 0,5 L / 1,0 L for cartons without screwcap

Condition: excellent (used), MyRef MY-ZB26-TFD refrigeration unit MyRef MY-ZB26-TFD condensing unit suitable for refrigeration applications Typical applications are Freezer cabinets in supermarkets and minimarkets cold stores Beer cellars Milk cooling systems Standard equipment Copeland Scroll M compressor ZB series with sound insulation hood Oil sump heater Liquid receiver with burst protection Filter dryer Sight glass visible from outside Ball shut-off valves Component-tested combined HP/ND safety pressure switch Electrical equipment: IP 55 switch box, compressor contactor, DIN rail mounting Condenser is integrated and protected in the housing Gsdovtl T Djpfx Ak Usug Condenser fins coated with epoxy resin phenol (gold paint*) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; all screws and components can be accessed from the front with minimal effort Blind rivet nuts with carriage bolts for secure, durable fastening without rust problems Pressure-controlled speed regulator with EMC filter Space-saving installation of several units next to each other possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit Type: MyRef -ZB26-TFD Built-in compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dbA-10 m Collector volume: 6 liters Air volume: 4500m³/h Cooling capacity: 9 kW Voltage: 400V,3PH,50Hz Power consumption: 8.9 A Dimensions: HxWxD 715 x 1120 x 450 mm Weight: 102 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 6 kg, first registration: 06/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED STAINLESS STEEL INSULATED TANK, NON-DETACHABLE, FORMERLY A SINGLE-COMPARTMENT MILK TANK WITH NON-FUNCTIONING REFRIGERATION UNIT REF: 25-U-169 Godpfezc Scnsx Ak Ujug TYPE: stainless steel tank OVERALL DIMENSIONS TOTAL TANK LENGTH: 4.00 m TOTAL TANK WIDTH: 2.10 m TOTAL TANK HEIGHT: 2.10 m TOTAL TANK VOLUME: 13,600 liters COLOR: steel. Errors and/or omissions excepted. The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of selling and purchasing industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and detachable equipment. With a readily available fleet of over 50 trucks and over 150 containers, including those with and without cranes. S.E.&O Given the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: ready for operation (used), Item: D-10655-Small Open cheese vat Gusdpsh Hrdyofx Ak Ujg Open Type Cheese vat, for small home-farm production Capacity 100 L, Stainless Steel with agitation and control unit Vat dimension: 800 x 600 x 300 mm Stainless Steel frame Complet with Pump

Condition: used, Year of construction: 2018, Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)     Guodpfx Akel Hx Dmj Usg

Condition: good (used), Item: D-2929-Cheese cutting machine Cheese dividing / cutting machine, Gujdpfxeh D H T He Ak Usg Semi automatic pneumatic type, Stainless steel for cheese block up to 500 mm Please contact us for more information. Many tools for offer!

Condition: new, Year of construction: 2026, The SV-series Vibro Sieve is a high-performance circular screening machine designed for the efficient separation, classification, and grading of powders and bulk materials. Manufactured entirely from AISI 304 stainless steel. Technical Specifications Model: SV-1000 • Screen diameter: 1000 mm • Standard number of fractions: 2 • Motor power: 1.1 kW • Material: AISI 304 Stainless Steel (18/10) • Dimensions (L × W × H): 1037 × 1000 × 1000 mm • Weight: 230 kg Flexible Screening Configuration The SV-series can be configured to meet different production requirements: • Single deck (standard) – separation into 2 fractions • Two decks– separation into 3 fractions • Three decks (optional) – separation into 4 fractions Screen meshes are available in various aperture sizes according to the customer’s application. Self-Cleaning Screen System The SV-series is equipped with a self-cleaning ball system designed to prevent screen blockage during operation. Applications The SV-1000 is suitable for a wide range of industries, including: • Plastic recycling and compounding • PVC processing • Chemical industry • Fertilizer production • Detergent manufacturing • Food processing • Milk powder production • Spices and flavorings • Confectionery • Pharmaceutical manufacturing • Dry construction materials Gsdpfxozvqd Ae Ak Ujug • Mineral powders • Bulk powder classification

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: Godpfx Aszg Dlbek Ujug • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: new, Year of construction: 2026, functionality: fully functional, High performance soft and hard cheese grater. The 2.2kW motor will easily grate any cheese. By changing blades you can get vegetable slicer with the same machine. General Features: • Productivity 500-1000 kg/h; • High quality, long lasting stainless steel cutting knives (up to 100 tons between sharpening); • Disc diameter of 40 cm, grants, that you can put whole or cut in half small cabbage heads; Gjdpsdv Ec Uofx Ak Ujug • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; • Compact size can be equipped with wheels and easily transported; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(picture); • Machine motors can be adjusted as required up to 2200 W. • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask;

Year of construction: 1998, condition: ready for operation (used), Two identical AZO aluminum silos are available. Volume: 10m³/10000l, diameter: approx. 1960mm, height: approx. 3300mm, products: Powdered sugar/cocoa (heavily de-oiled)/lactose/whey/skimmed milk, bulk density: 0.6kg-0.7kg/l, conveying capacity: 1500kg-2000kg/h, material: A2-2, frame: painted. Including vibrating discharge trays, separators, top filters, pneumatic conveying system with pressure blower. Documentation available. On-site inspection is possible. Gedpsuaftxjfx Ak Usug

Condition: like new (used), Auger Doser Rovema SDX – Precision Dosing for Powdered and Small-Grained Products The Auger Doser Rovema SDX is designed to handle nearly every powder and small-grained product, including milk powder, coffee, spices, sugar, and chemicals. Engineered for high hygienic standards, the SDX ensures efficient, precise dosing even with difficult products. This advanced dosing system offers a 35-liter hopper, a fill-level sensor, and a swivel-out screw, allowing for easy cleaning and quick tool changes, making it ideal for high-uptime production environments. The tailored screw design will be specifically catered to the characteristics of your product, ensuring reliable and consistent dosing performance. Gedpex Ai Awsfx Ak Ujug

Condition: excellent (used), BERTOLI H5 150 Homogenizer – Stainless Steel BERTOLI H5 150 industrial homogenizer in stainless steel, designed for high-pressure homogenization of liquid and semi-liquid products in continuous processes in the food and beverage industry. The equipment allows the product to be subjected to high pressure to reduce and uniform the size of particles or globules, promoting the production of a more homogeneous and stable mixture. This process is especially important in products where it is desired to improve emulsion stability, reduce phase separation, and achieve a more uniform texture. Its industrial construction and product-contact parts in stainless steel allow it to be integrated into continuous processing lines for thermal treatment, pasteurization, and production of liquid foods. MAIN FEATURES -Manufacturer: BERTOLI -Model: H5 150 -Type: Industrial high-pressure homogenizer -Continuous homogenization process -High-pressure pumping system -Robust homogenization block -Reduction and uniformization of particle size -Improvement of product stability and homogeneity -Product parts in stainless steel -Pressure control pressure gauge -Sanitary inlet and outlet connections -Industrial construction for continuous operation -Integrable into existing process lines APPLICATION The BERTOLI H5 150 is designed to receive the product continuously, pressurize it, and pass it through the homogenization system. The application of high pressure generates mechanical forces that allow the particle or globule size to be reduced and a more uniform distribution to be achieved, depending on the characteristics of the product and the process conditions. Homogenization can contribute to improving properties such as emulsion stability, texture, consistency, and resistance to phase separation. It can be integrated with: Pasteurizers and UHT systems Heat exchangers Process tanks Mixing systems Sanitary pumps Deaerators Aseptic processing systems Godpewny Nzjfx Ak Ueug Automatic filling lines APPLICATIONS Especially suitable for dairy industries, beverage and juice manufacturers, sauce, cream, and emulsion producers, and other manufacturers of liquid or semi-liquid foods that require industrial homogenization. Depending on its configuration, it can be used for milk and dairy products, beverages, juices and nectars, sauces, emulsions, fruit preparations, and other liquid food products. The combination of BERTOLI technology and high-pressure homogenization provides a particularly interesting solution for industrial lines that require a uniform and stable final product. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2004, machine/vehicle number: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Gujdpfxox H Tf To Ak Usg Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts. When supplied refurbished, a 6-month warranty is available, offering confidence in performance and longevity for second hand indus...

Year of construction: 2001, condition: ready for operation (used), Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible. Guodpferp E Nksx Ak Ujg

Condition: ready for operation (used), A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible. Guedpfxov Sugqe Ak Ujg

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: Gujdpfx Ajzi Hc Ijk Uog The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, resins, chemicals, detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Key advantages: the medium only comes into contact with the working hose, dry running capability, self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.