Used Krones for sale (138)

Condition: used, Year of construction: 2024, Overview Used spare parts for KRONES Contiform S PET stretch blow moulders (S8 to S24), sold individually from stock - no need to buy the complete inventory. The part descriptions name the executions S Gen. 2-3.1, S Gen. 4a, S Enviro and Enviro 2. Age and condition - Mould carriers and heating chain: 2 years old - Cams: older, without damage - Electrical parts: partly from 2005, others newer. The older ones are no longer made in this form; the alternative is a retrofit at extra cost. - All parts used, sold as-is without guarantee, subject to applicable law and the agreed sales terms Available parts (part number, description, quantity) Heating and preform handling - actuation unit T50 NRS (32) - heating chain link HZM T50 (250) - 1786323181 heating mandrel, 44 mm stroke (250) - three-phase motor 120/150 W (20) - 1786323430 reflector, complete (60) - 2800200575 energy-optimised heating box (20) Cams and locking - 1786470930 guide cam, downward (1) - 1786470940 guide cam, upward (1) - 1786470640 cam segment (1) - 1786470660 cam segment (1) - 1786470650 cam segment (1) - 1786470700 cam segment (1) - 1786470710 connecting plate (1) - 1786471180 linkage lever (1) - bearing bracket LBN-20/25 (1) - double-acting cylinder 25 mm, stroke 20 mm (1) - rod-end joint (1) - locking cam type 787 (1) - unlocking cam type 787 (1) - main cam (quantity on request) Drive and blowing modules - synchronous geared motor 11 kW (1) - 2786107120 pinion shaft, 18/24 stations (1) - 2800207818 intermediate shaft, 24 stations (1) - sealing head (1) - 2800200738 stretch module housing (10) Bwedj Ahxz Hspfx Aknjw - 9120641682 blow piston block, Enviro 2 (24) - blow slide, S Enviro (20) - 2800200762 stretch slide, S Gen. 2-3.1 (20) Mould carriers S Gen. 4a - mould carrier, complete (23) - 2800200765 base mould holder (23) - 2800200774 actuation assembly (23) Bottle transfer - 9121792003 swivel arm, infeed star (24) - 2800200556 bottle rejection assembly, 16-24 stations (2) Media and electrical - flow meter type 335 (3) - 1786411200 hose assembly, base mould (20) - 1786411210 hose assembly, mould half A (20) - 1786411220 hose assembly, mould half B (20) - power controller (20) - safety switch 250 V / 2 A (8) - Danfoss VLT 500 frequency inverter (6) Compatibility Check the fit on your machine before purchase: send the KRONES machine model with its type plate data, the part number and, if available, the assembly or drawing number. KRONES and Contiform are trademarks of their respective owner; this is an independent offer of used spare parts. Availability Available immediately from stock; quantities subject to confirmation, photos of individual parts on request.

Condition: used, Year of construction: 2015, Overview Complete glass bottle line for still soft drinks and juices, built around a Krones Modulfill filler with Variojet rinser from 2015 and rated at 13,000 bottles per hour on 1 l and 22,000 bottles per hour on 0.25 l. The line runs non-returnable glass: depalletizing, rinsing, hot or cold filling, a White Cap twist-off capping machine behind the filler, hot-fill pasteurization, cooling, full bottle inspection, labelling on a Krones Prontomatic and a Langguth labeller, sleeving, tray and carton packing, incrating and palletizing, with buffer table. Two cappers are part of the line. The filler runs hot fill and can also fill cold, which widens the range of products the line can handle. There is no carbonator, so the line fills still (non-carbonated) products only. Technical data - Products: still soft drinks, juices - Filling: hot fill or cold fill, no carbonation - Containers: non-returnable glass bottles 0.25 l - 1 l - Line output: 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l - Years of manufacture: 1987 - 2016 Scope of Delivery Type | Manufacturer | Model | Description | Year - Glass depalletizer | Legendre | 16,000 bottles/h | 1999 - Rinser | Krones | VARIOJET | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Filler | Krones | MODULFILL | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Twist-off capping machine | White Cap | closure diameters 38 - 53 mm, arranged behind the filler - Bottle inverter | Polyketting | 12,000 bottles/h | 2004 - Hot-fill pasteurizer | APV | 15,000 l/h | 2005 - Bottle cooler | SEN | 1987 - Full bottle inspector | Heuft | SPECTRUM TX | 22,000 bottles/h Bsdpj Agpk Aefx Aknoww - Labeller | Krones | PRONTOMATIC | 15,000 bottles/h | 2006 - Labeller | Langguth | 13,200 bottles/h | 2004 - Sleever | Sleeve Technology | 16,000 bottles/h | 2016 - Buffer table | Krones | 2006 - Tray packer | SMI | 16,000 bottles/h | 1996 - Incrater | Stork | 16,000 bottles/h | 1996 - Carton erector | Kettner | KAF | 12,000 bottles/h | 1999 - Carton closer | Kettner | HDV | 12,000 bottles/h | 1999 - Palletizer | Kettner | PRESSANT UNIVERSAL | 17,000 bottles/h | 1996 Condition Used, still installed. The line produces one last time from 1 to 20 November 2026. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Bwjdpfx Aez Euuboknjw Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour • Maximum container volume: up to 3 l (depending on the shape) • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: used, Year of construction: 2000, machine/vehicle number: 690-264, Machine: KRONES KGW-65-S-E Crate washer Bjdps Ahlaaofx Aknjww

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A Bwedpfx Aszzz Najknew - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Bedpfx Ajzzz N Heknoww Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, Year of construction: 2004, Overview Krones Lavatec KES bottle washer from 2004, rated at 11,000 bottles per hour. The machine cleans glass bottles in a juice and soft drink bottling line and is still installed and under power. Technical data - Manufacturer: Krones - Model: Lavatec KES - Year of manufacture: 2004 - Output: 11,000 bottles/h - Containers: glass bottles Bwsdpfx Ako Agpqwenow - Electrical supply: 380 V, 3 phases, 50 Hz, 70 A connected load Condition Used, still installed and under power. The line produces until shutdown on 20 November 2026. Inspection on site is possible. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, Year of construction: 2018, Overview Bwodpfszy Ud Iex Aknjw This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 1987, with 2 stations photo-oriented working direction: left-right Bwodpfx As Ahk N Asknew Capacity: 8000 bph

Condition: used, Year of construction: 1996, Monobloc filling machine from the renowned manufacturer Krones – model VHK 032 / SV 08. This machine is designed for filling alcoholic beverages (vodka, liqueurs, still drinks) into glass bottles with aluminum ROPP closures. Technical data: Manufacturer: Krones (Germany) Year of production: 1996 Model: VHK 032 / SV 08 Machine type: monobloc (filling + capping) Output: approx. 10,000 bottles/h Bsdpsyxv Ihofx Aknoww Filler: 32 valves (gravity system) Capper: 8 ROPP heads (aluminum, e.g. 28 mm) Technical condition: used machine, condition as shown in the photos, serviced and fully operational until end of production.

Condition: used, Year of construction: 2012, Overview Krones filling and labelling block from 2012 for glass bottles, offered as one package: a Krones Modulfill filler/capper monoblock with 60 filling valves and 12 capping heads, and a Krones Universella cold glue labeller with two labelling stations for front, back and neck labels. The filler is specified for approx. 15,000 bottles per hour and was observed in production at approx. 14,990 bottles per hour; the labeller is rated for 20,000 bottles per hour. Both machines are in production until early 2027; the labeller has been regularly maintained by Krones. Scope of Delivery - Filler/capper monoblock | Krones | MODULFILL | 60 filling valves, 12 capping heads, plastic screw caps | 2012 - Cold glue labeller | Krones | UNIVERSELLA | 2 labelling stations (front, back, neck), date coder, glue pumps | 2012 Technical Data - Filler/Capper - Application: filling and closing of glass bottles - Filling system: volumetric filling - Filling valves: 60 - Capping heads: 12, plastic screw caps - Output: approx. 15,000 bottles/hour - Adjusted to bottle sizes: 0.75 l (Ø75 mm x 265 mm) and 0.33 l (Ø65 mm x 175 mm) - Control: Krones iPanel CD - Operating hours: 41,381 h (production counter 40,754 h) - Electrical supply: 400/230 V, AC 3/N/PE, 50 Hz, full load current 36 A - Construction: stainless steel and glass safety enclosure Technical Data - Labeller Bjdpfxjz I Rfnj Akneww - Labelling: cold glue, 2 stations for front, back and neck labels - Output: 20,000 bottles/hour - Formats: 0.25 l Vichy, 0.5 l, 0.7 l and 0.75 l GDB and Schlegl bottles - Pitch circle diameter: 600 mm - Container plates without servo drive - Infeed and outfeed direction 90°, counter-clockwise rotation - Date coder installed on the machine - Glue pumps included - Operating hours: 36,000 h Condition Used, both machines in operation in a beverage production environment; labeller regularly maintained by the OEM. Availability Available from . Location: Germany.

Condition: used, Year of construction: 2003, machine/vehicle number: RV150, Consisting of: - Rinser 20 nozzles - Filler 20 valves - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Bjdpfxs Ahlr Is Aknoww Capacity: 3500 bph

Condition: used, Year of construction: 2003, Overview This Krones Sander Hansen tunnel pasteurizer was built in 2003 for the pasteurization of beer in glass bottles. It is a double-deck machine with a nominal capacity of 40,000 bottles per hour on 0.5 l bottles. Its 12 treatment zones - 4 regenerative zone pairs and 4 pasteurizing zones - cover a treatment area of 241.6 m². At the design point it delivers 25.3 PU at 60 °C, with a total treatment time of 54.2 min (17.2 min heating, 19.9 min pasteurizing, 17.2 min cooling) from an inlet temperature of 12 °C to an outlet temperature of approx. 35 °C. Technical data - Manufacturer: Krones (Sander Hansen) - Year of manufacture: 2003 - Machine type: double-deck tunnel pasteurizer - Capacity: 40,000 bottles/hour (0.5 l glass bottles) - Treatment area: 241.6 m² - Decks: 2, main conveyors: 2 - Zones: 12 in total (4 regenerative zone pairs, 4 pasteurizing zones) - Max. spray temperature: 64.5 °C - Water content: 38.9 m³ in total (20.6 m³ in the zones, 18.3 m³ in the buffer tanks) - Steam: 2,270 kW design flow, approx. 1,100 kW in balanced operation - Main water: 77.8 m³/h design flow, approx. 1.0 m³/h in balanced operation - Compressed air: 5 m³/h - Electrical: 215 A rated current, 141.3 kVA, 113 kW, cos phi 0.80 - Overall length without operator platforms: approx. 24,752 mm - Width: approx. 5,580 mm (7,680 mm incl. pumps and operating area) - Pump side: right, seen from the infeed - Empty weight: approx. 74,000 kg (163,200 kg with product and water) - Largest section for transport: 12,000 x 1,100 x 2,250 mm - Transport: approx. 12 x 40 ft containers or trucks Equipment - Stainless steel housing with external circulation pumps and piping - Buffer tanks for regenerative water management - Local push-button control stations with emergency stops along the machine - Electrical cabinets and field terminal boxes - Operator platform with stairs Bsdpfx As Af Tkhsknsww Scope of supply The associated conveyor systems are not included. The scope of the conveyor system can be seen in the photos. Condition Used, still installed. The machine can be visited. Dismantling and loading can be carried out by the seller. Availability From 28 October 2026. Location: Poland.

Condition: used, Year of construction: 2013, machine/vehicle number: ET238, Used KRONES labeller machine - 2013Technical Specifications & Performance DataThis Krones rotary labeling machine is engineered for high-speed wrap-around labeling with OPP film using hot melt adhesive. Built in 2013, it is suitable for modern beverage production and industrial packaging lines, offering dependable performance for second hand and used bottling line applications.Manufacturer: KronesModel: AC 3/N/PEYear: 2013Maximum speed: 25,000 bphMachine type: Rotary labeling machineLabel type: OPP roll-fed wrap-aroundAdhesive: Hot glueNumber of plates: 15Machine pitch: 111 mmLabel reels: 2 reels, max roll diameter Ø 500 mmLabel magazines: 2Container material: PETCurrent bottle format: 0.5LWorking height: 1200 mmElectrical data: 400 V, 3 PH + N, 50 Hz; full-load current 23 A; pre-fuse 35 A; enclosure rating IP54Compressed air: 7 barApprox. overall length: 3800 mmHMI: KronesPLC: SiemensAdvanced Automation & Control SystemsThe machine integrates a Krones HMI for intuitive operation and recipe management, coupled with a Siemens PLC for reliable, industry-standard control. The hot glue roll-fed system is optimized for consistent label feed, precise cutting, and accurate wrap-around application at high speeds. The rotary carousel with dedicated bottle plates supports stable container handling, while quick-access stations and repeatable settings facilitate efficient operation and changeovers.Operator-friendly Krones HMISiemens PLC-based automationRepeatable settings for label and container changesIP54 electrical cabinet protectionProduction Line Integration CapabilitiesDesigned for seamless integration into PET bottling equipment, this labeling machine can operate as a standalone unit or inline within a complete packaging machinery ecosystem. It fits beverage production lines handling wrap-around OPP labels on cylindrical PET containers.Standalone or inline integration with conveyorsCompatible with PET cylindrical bottlesSuited for high-speed industrial packaging linesApplicable in used bottling line and second hand equipment upgradesMachine Condition & Maintenance HistoryThe machine is ready for operation, overhauled, and supplied with compatible spare parts. It comes with a 6-month warranty, offering assurance of performance and reliability for immediate deployment in production.Ready for useOverhauled and testedIncludes compatible spare parts6-month warrantyOperational Performance & VersatilityEngineered for beverage applications that demand consistent wrap-around labeling quality a... Bwjdpfs Adt Iwjx Aknow

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Bwodpfx Asvddkvoknew Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition

Condition: used, Year of construction: 2012, operating hours: 759 h, machine/vehicle number: LC644, Used Krones CSD filling line for Glass 36000 BPHTechnical Specifications & Performance DataThis line is build in 2012, Krones complete line for glass CSD, rated 36,000 bottles/hour in 1.0 L format, with a 70‑valve isobaric filler and 18 capping heads. ready for operation, and shows 759 working hours.Manufacturer: KronesYear of manufacture: 2012Nominal capacity: 36,000 bphProduct type: CSD (carbonated soft drinks)Container type: Glass bottlesBottle neck finish: 28 mmVolume format: 1.0 LRinsing heads/nozzles: 90Filling valves: 70 (isobaric filler for CSD)Capping heads: 18Working hours: 759Electrical ratings: 400/230 V, 50 Hz; up to 46 A on major modulesLine components: Krones Linatronic empty-bottle inspector; rotary rinsing machine (90 nozzles); isobaric filling machine (70 valves, 18 capping heads); Krones Checkmat filled-container inspector; Krones Autocol labeling machine; Krones Variopac wrap-around packer; Krones Modulpal palletizer; integrated conveyor systemDocumentation: Operating manuals availableLayout: Line layout availableAdvanced Automation & Control SystemsKrones automation with centralized HMI enables recipe-based changeovers and synchronized drives for high-speed CSD operation.Operator HMI for setup and monitoringAutomatic synchronization across rinsing, filling, labeling, packing, palletizingElectronic fill control optimized for isobaric CSD fillingInterlocked safety guards and distributed emergency stopThree-phase 400 V supply with 230 V control circuits, 50 HzProduction Line Integration CapabilitiesEngineered as a cohesive Krones platform and bottling station, maintaining precise glass handling from infeed through palletizing.Inline operation with full conveyor integration from empty bottle inspection to finished palletsFormat range centered on 1.0 L, 28 mm neck glassIsobaric technology dedicated to carbonated soft drinksLabeling via Krones Autocol for accurate application on glassWrap-around case packing (Variopac) and palletizing (Modulpal)Machine Condition & Maintenance HistoryOn power and ready for operation with low hours. Documentation and layout support fast installation and service planning.Operational status: ready for operationLow-hours profile: 759 hoursManuals and layout includedOperational Performance & VersatilityConfigured for glass CSD, providing stable carbonation retention and foam control at 36,000 bph. As a CSD bottling machine, quality control is ensured by dual inspection: Linat... Bwjdpfx Akozd Uftsnow

Year of construction: 2011, operating hours: 10,500 h, condition: used, machine/vehicle number: ISP17, Used Inspector KRONES Linatronic K735 year 2011 Bedpfx As Adyv Uokneww The Used Inspector KRONES Linatronic K735 year 2011 offers a proven and efficient solution for quality control in high-performance bottling lines. The German manufacturer KRONES, a global leader in beverage industry automation, built this model with reliability, precision, and modular construction in mind. As a result, this inspector fits seamlessly into industrial environments that demand high accuracy and operational consistency. Electrical characteristics and technical configuration of the Used Inspector KRONES The Used Inspector KRONES Linatronic K735 year 2011 runs on a three-phase power supply at 400/230 volts, with a 50 Hz frequency and a 13-ampere current draw. Consequently, it aligns with European industrial standards and supports stable operation under demanding conditions. Furthermore, the electrical system includes integrated safety devices that protect the components from overload or malfunction. In addition, the compact and durable enclosure facilitates easy integration into existing production layouts. Year of production and machine hours KRONES produced this unit in 2011. Since then, the machine has logged 10,500 operating hours, which reflects moderate usage for equipment designed for industrial use. Compared to other models with similar functionality, this unit maintains good performance standards. Moreover, the machine structure shows minimal wear, confirming its careful maintenance. Therefore, technicians can expect reliable functionality without immediate need for major refurbishment. The machine is currently operational, specifically until Easter. Then it will be dismantled.  Supported inspection types The Used Inspector KRONES Linatronic K735 year 2011 is equipped with a comprehensive range of inspection functions to ensure the quality and integrity of each bottle. -The system performs bottom inspection to detect chips, cracks, or foreign objects at the base. -The sidewall (walls) inspection uses a rotating mirror and cameras to identify defects such as scratches, cracks, or dirt on the entire lateral surface. -The neck finish and thread inspection ensures that bottle openings are free from damage or deformation that could compromise sealing or capping. -Scuffing inspection checks for surface abrasions that indicate excessive wear. In addition, the machine employs infrared (IR) and high-frequency (HF) technology to detect residual liquid, ensuring the bottles are dry and ready for fill...

Condition: used, Year of construction: 2012, machine/vehicle number: LC647, Used Sidel filling line for water, PET 36000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-efficiency PET still-water production system engineered for industrial packaging and beverage production. Designed around a 0.55L format and the 30/25 PCO1881 neck finish, it delivers a nominal output of 36,000 bottles per hour. Major equipment includes a Sidel SBO20 blow molder with 20 cavities, a Sidel EUROPA WM filling monoblock configured with 60 filling valves and 15 capping heads, and a Krones Contiroll HS labeling machine for continuous high-speed labeling. The line is a robust second hand solution for producers aiming to scale PET water operations with proven reliability.Production speed: 36,000 bph (design format 0.55L)Primary format: 0.55L (550 ml) bottlesNeck finish: 30/25 PCO1881Containers: PET bottlesBlow molder: Sidel SBO20, 20 cavitiesFilling monoblock: Sidel EUROPA WM, 60 valves / 15 capping headsLabeler: Krones Contiroll HSCap feeding: Sidel Aidlin 24 cap feederLine year: 2012 (core filler unit 2011)Advanced Automation & Control SystemsThe line integrates synchronized control between the blow molder, filling monoblock, cap feeding, and labeling systems to maintain stable, high-speed operation. Central operator interfaces coordinate start/stop sequences, speed ramps, and fault diagnostics. Safety interlocks, guarding, and emergency stops protect operators while ensuring consistent uptime. Quick adjustments and recipe-based parameters support repeatable setups for the 0.55L format, minimizing changeover downtime and optimizing overall equipment effectiveness.Production Line Integration CapabilitiesEngineered for inline operation, this PET bottling equipment connects via conveyor systems with accumulation and transfer sections for smooth product flow. The configuration supports still water applications with the 30/25 PCO1881 neck finish, enabling efficient handling from preform feeding and blow molding through filling, capping, and wrap-around labeling. The system architecture allows integration with upstream and downstream equipment such as inspection, case packing, and palletizing to form a complete beverage production and industrial packaging solution.Machine Condition & Maintenance HistoryThe line is still in production, indicating maintained operability and continuous performance under real operating conditions. Components have been kept in working order to support ongoing output. This second hand PET water line benefits from active status, helping prospective users evaluate performance and plan for a smooth transition to new production requirements.Operational Performance & VersatilityOptimized for still water, the Sidel EUROPA WM monoblock combines precise filling with consistent capping torque control across 15 heads. The Sidel SBO20 blow molder provides reliable preform heating and stretch-blow performance across 20 cavities for stable bottle quality at high speeds. The Krones Contiroll HS delivers continuous, high-speed labeling accuracy suitable for demanding PET beverag... Bjdezc Hqmjpfx Akneww

Condition: excellent (used), Year of construction: 1996, The machine was located at a school and was never put into production. It is also suitable for being disassembled for parts. Bwode Afb D Ajpfx Aknow

Condition: used, Year of construction: 2023, Labelling machine for the cold-glue application of paper front, back and belly labels onto glass bottles. Equipped with a Domino CO₂ laser for label marking. The labelling machine was upgraded in 2023 with a mechanical overhaul and a refurbishment of the electrical systems. Additional title: cold glue labeling Capacity appr.: 60000 bo/h Current: 32 A Voltage: 400 / 230 V Frequency: 50 Hz Formats: 0.5 l Longneck Operation / Control: Simatic S7-1500 Position: in stainless steel housing on feet Base construction: carousel-type machine Features: label magazines; glue pumps; safety doors; control cabinet; operator terminal with visualisation Bsdpezu Rzlsfx Aknjww

Condition: used, Year of construction: 2010, machine/vehicle number: ET244, Used KRONES STARMATIC labeller machine 20000 BPHTechnical Specifications & Performance DataManufactured by Krones, the Starmatic is a rotary cold glue labeling machine engineered for precise application of pre-cut paper labels on glass bottles. This second hand unit is an excellent fit for a used bottling line where reliable labeling performance and easy integration are required.Production speed: up to 16,000 bphContainer material: GlassCurrent bottle format: 1.0LLabel type: Pre-cut paperLabeling method: Cold glueMachine type: Rotary, clockwise rotationNo. of plates: 16Machine pitch: 187 mmLabel magazines: 2Dimensions (L x W x H): 3200 x 3000 x 2500 mmWorking height: 1200 mmElectrical supply: 400 V, 3 PH, 50 HzCurrent draw: 17 ACompressed air: 7 barYear of manufacture: 2010Advanced Automation & Control SystemsThe machine is equipped with proven automation and operator interfaces to support consistent, high-quality label application in beverage production environments.PLC: SiemensHMI: Krones iPanel CDProcess control: Integrated temperature control and Krones Checkmat-based control functionsOperator-friendly setup and repeatability for format adjustmentsDesigned with rotary precision for stable bottle handling and label transferProduction Line Integration CapabilitiesThe Krones Starmatic integrates seamlessly into industrial packaging and beverage production lines. It can work inline with upstream rinsing and filling equipment and downstream capping and inspection systems. With two label magazines and rotary handling, it supports rapid operation within a complete packaging machinery layout.Inline or standalone operation with standard conveyorsDesigned for glass bottle handling in 1.0L formatSuitable for integration into used bottling line upgrades and second hand line expansionsMachine Condition & Maintenance HistoryThis unit is overhauled, tested, and ready for immediate operation. It is offered with compatible spare parts and a commercial guarantee to support rapid commissioning and dependable performance.Condition: Overhauled and guaranteedAvailability: Ready for operationWarranty: 6 monthsOperational Performance & VersatilityEngineered for high-quality cold glue labeling with pre-cut paper labels, the Starmatic delivers accurate positioning and secure adhesion for a wide variety of beverage categories. It is well suited for premium branding where paper labels and glass packaging are preferred.Ideal for beverage production including water (still and sparkling), CSD, beer, wine, spirits, and also suitable for ... Bsdpj Adyuwefx Aknsww

Condition: used, Year of construction: 2016, Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data - Capacity: approx. 33,000 bottles/hour - Formats: - 0.75 GDB DN2 - 0.5 L longneck beer - 0.33 L longneck - 0.25 L individual bottle - Application: Cold-glue labelling of beverage bottles Bedpfxezhaadj Akneww - Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates - Label positions: Front, back, neck - Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

Condition: used, Year of construction: 1999, machine/vehicle number: LC693, Used KRONES Sensometic VP-G filling line 12000 BPH for fruit syrup - Year 1999Technical Specifications & Performance DataThis KRONES complete bottling line is configured for filling raspberry syrup, various fruit syrups and special citrus vinegar at a filling temperature of 25 °C. Built in 1999, the line handles glass bottles and PET bottles in three documented formats, combining rinsing, filling, dual capping and cold-glue labeling within an integrated industrial packaging process.Maximum production speed: 12,000 bph with 0.7L glass bottlesProduction speed: 10,000 bph with 1.0L glass bottlesProduction speed: 6,000 bph with 1.5L PET bottlesCompatible formats: 0.7L glass, 1.0L glass and 1.5L PET bottlesElectrical supply: 240/400 V, 50 HzLine direction: left to rightAdvanced Automation & Control SystemsThe bottling equipment is controlled by a Siemens S5 115 U PLC. Electronic valve control is fitted to the three-channel KRONES Variojet rinser, while motorized height adjustment is provided on the filler upper section and on both capping stations. The labeling machine incorporates a horizontal, single-line laser dater for in-line coding.The Prontomatic labeling machine has a full protective enclosure and a lift-up monoblock design, supporting protected operation and access during routine line activities.Production Line Integration CapabilitiesDesigned as a complete used bottling line, this KRONES configuration integrates bottle rinsing, filling, screw capping, snap-on capping and multi-position labeling. Standard feeding, right-angle labeler infeed and transfer-screw container handling support continuous bottle movement through the labeling section. The line is suitable for industrial packaging applications involving syrup and vinegar products in glass and PET containers.Machine typeManufacturer / modelYearRinsing MachineKRONES Variojet 2.520-070-1131999Filling MachineKRONES Sensometic VP-G 050-113/SV 10/SOV 10-S1999Capping MachineAlcoa PP 10 / 360Capping MachineAlcoa K 10 / 360Labeling MachineKRONES Prontomatic 720-12-6-4-1801999PrinterLaser daterMachine Condition & Maintenance HistoryThe line is availa... Bedpfj Adtqxex Aknoww

Condition: used, Krones bottle washing machine, manufactured in 2001. Capacity: 6,000 bottles/hour, bottle size: 0.2 l - 1.0 l. Bweds Adraxepfx Aknjw Machine will be available in December 2026.

Condition: used, Year of construction: 1995, Machine for palletizing cartons or bottles and wrapping with stretch film. Manufacturer: KRONES Model: PALMASTER Year of manufacture: 1995 Set includes an OCTOPUS pallet stretch wrapper with pressing device. Used machines, still installed—as shown in the photos. Bodpfx Aoyrf Atoknsww Technical documentation included. A KRONES depalletizer is also available in the offer.