Used wide belt sanders 1300-1499mm working width for sale (124)

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Hnodpfow R Hh Uox Ak Don Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: new, Working width 1350 mm Number of sanding units 2 st. Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS Hedpfx Aksrmucxj Donn

Condition: like new (used), Year of construction: 2013, operating hours: 250 h, Wide-belt sanding machine Bütfering Type: SWT 315/C Optimat Year of manufacture: 2013 Working width: 1350 mm Feed rate: 2.5 – 13 m/min, adjustable via frequency converter 1 combination unit with steel contact roller, with three options: - infinitely variable, frequency-controlled cutting speed 2-18 m/s, - calibration sanding with profiled contact roller - veneer and lacquer sanding - one electro-pneumatic segmented pressure bar with 25 mm segmentation - protected storage area on the machine for storing additional sanding pads - adjustable sanding belt blowing device, 5-stage adjustable, application-optimized cleaning results with low compressed air consumption Technical data: Working width: 1350 mm Sanding belt width: 1350 mm – 1380 mm Belt change side: left Workpiece thickness: 3 – 160 mm Operating voltage: 400 V / 50 Hz Drive motors: Unit: 20 kW Total connected load: approx. 23 kW Extraction nozzle: 1 x Dm 180 mm (unit) Extraction volume: approx. 1,830 m³/h Hjdpfx Akezb Ikxe Denn BL 1 (1350 MM) BELT LENGTH 2150 MM Sanding belt length: 2150 mm UPGRADE TO MPS 1 Design of the segmented pressure bar as an electromagnetic segmented pressure bar MPS with program-controlled, current-controlled adjustment of the sanding pressure of each individual sanding segment, with 2 buttons per actuator in a 25 mm grid VAKIX 1/2 (1350 MM) VACUUM INTEGRATED (T3) High-performance fan for connection to a prepared vacuum clamping device with a 3 kW fan, nozzle diameter: 160 mm Extraction volume: 940 m³/h FBM (1350 MM) FINISHING BRUSH Driven finishing brush on the outfeed side of the machine Nozzle diameter: 140 mm Extraction volume: 1100 m³/h ATA 2 (1350 MM) SUPPORT TABLE, FOLDABLE Support table approx. 900 mm long with an integrated roller at the outfeed (foldable) Machine weight: 2800 kg

Condition: used, machine/vehicle number: 008399, Max. machining width: 1350 mm Working Table: Fixed pass height No. Operating units: 4 Nr Hsdey I Tm Hopfx Ak Dsnn

Condition: used, machine/vehicle number: 008400, Max. machining width: 1350 mm Working Table: Fixed pass height No. Operating units: 4 Nr Hodpfxeywafbs Ak Donn

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Hnedex N A Aaepfx Ak Den Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode Hodpfx Akok Dpp Se Denn - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Hjdpfx Akjy Ehiwj Dsnn Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Hnjdpfezcmcvex Ak Dsn Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: A50729/RC1, working width: 1,350 mm, Equipment: documentation/manual, SECOND-HAND WIDE BELT SANDER COSTA MOD. AK-CCCT 1350 - CE RULES - Working width 1350 mm - S/N A50729/RC1 Hjdpfxszcl Tao Ak Denn - Year 2005

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. Hjdpfxeych Igo Ak Dsnn (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Hjdjychqzspfx Ak Denn Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: used, Year of construction: 2006, 1. Combi aggregat with steel roller and electronic segmented pad working width 1350 mm, motor 15 kw, sandingbelt size 2620 x 1350 mm use full for sanding of Solid wood, veneer, laquer Hnjdpfx Ajym Rdrsk Den available from march 2026

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm Hnodpfx Aeym Rl Nok Don 2. combi unit - rubberroller and electronic segmented pad, eps system working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM total 30 kw - total kg ca. 1900

Condition: good (used), Year of construction: 1990, functionality: fully functional, STEMAC Wide belt sander for lacquer sanding MICRON 1 R Manufacturer Stemac Italy year of construction 1990 S/N S90.503 working width 1350mm 1 lacquer sanding unit 20 kW, infinitely variable speed Sanding belt length 2620mm with cleaning brush Infinitely variable feed Sanding belt blow-off device Electronic work table adjustment 400 V , 50 Hz Weight approx. 4300 kg Hodpfetyyl Ssx Ak Denn with some additional sandpaper

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Min. machining thickness: 200 mm Hedpfx Akewvq E Ao Dsnn Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: good (used), working width: 1,350 mm, HESEEMANN LSM8 Hjdpfjxcg Scjx Ak Djnn

Condition: good (used), Code: 0312 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 11 - Norme CE Automatic calibrating sanding machine with 2 belts and movable head for furniture, carpentry, custom-made furnishings, panels, solid wood, tables, composite materials and various - CE Standard Steel enblock Conveyor plane provided with a thick rectified steel structure Sanding belt motors placed inside the base Rubber conveyor belts structured in 3 cloths and sectionated in rings for constant centering on the plane Base with thickness sheet up to 30 mm Movable head using big lifting columns Technical data: Working width 1350 mm Working thickness 3-130 mm Fixed working surface height 900 mm Feed speed from 5 to 30 mt/min Belt dimensions 1400 x 2620 mm Working thickness display Composition: 1° Group Steel Calibrating Roller diameter 280 2° Group Rubber Sanding Roller diameter 300 Hsdpeynk Dnjfx Ak Denn Cleaning brush - Motor 2 Hp - Suction inlet diameter 160 Total power 57 kW Compressed air 7-8 bar Overall dimensions mm 2100 x 2300 x 2400 h Weight kg 5500

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Hnodpfx Asx Dm Tvok Djn Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 Hnsdpfxogm Tqws Ak Djn working width 1350 mm number of aggregates 2 1. sizing roller with the engine with power 18,5 kw 2. aggregate with the viscera with the power 11 kw brush with the power of 11 kw sweeping brush smooth regulation of feed speed weight of the machine: 2700 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic calibrating wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top range of automatic wide belt sanders and stands out due to its compact size, perfect sanding quality, ease of operation, and high reliability. It was used for final sanding of solid wood flooring. 2 main units: soft sanding rollers, 1350 mm rollers Additional units: Scotch-Brite brush, cleaning brush, cleaning air blowers Total maximum power consumption: 31 kW Hnsdpfx Ajy Idxyok Den Sanding width: 1350 mm Max. workpiece height: 160 mm Constant working height of the machine – suitable for integration into a production line Motorized adjustment of working thickness with LCD display Continuous speed control of the feed belt Continuous speed control of both working units Pneumatic air blowers for the working units Ammeter for monitoring motor load Remote switching off of units from the control panel Stop with 4 positions for compensating belt grit Feed belt is perforated with the option of vacuuming the parts Roller extension of the table at the inlet and outlet Pneumatic oscillation controlled electronically CE safety standard Weight: 3800 kg Year of manufacture: 2008 Damage to the first sanding roller – see photo Negotiable price: 28,000 EUR excluding VAT The machine is fully functional and sold as is. In stock in Telnice near Brno - Czech Republic Machine testing, demonstration, and operator training are, of course, available.

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW Hodpfxox Rdn Ts Ak Donn 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine with two sanding belts and a cutterhead for milling Hedpowmxh Tsfx Ak Denn

Condition: used, machine/vehicle number: 007614, Max. machining width: 1300 mm Hjdjx A Tatepfx Ak Donn Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: excellent (used), Year of construction: 1995, 3-HEAD WIDE BELT CALIBRATING/SANDING machine with 3 upper wide abrasive belts and calibrating/sanding rollers for sanding MDF, plywood, chipboard, and wood panels. Main technical data: * Maximum working width mm 1180 * Maximum sanding height mm 160 * Minimum sanding height mm 3 * Height of working table: 900 * 1st unit: Rubberized sanding roller, 90 Shore – Motor HP 15, ROLLER DIAMETER: 250 MM * 2nd unit: Rubberized sanding roller, 60 Shore – Motor HP 15 (together with the 3rd roller), ROLLER DIAMETER: 250 MM * 3rd unit: Rubberized sanding roller, 30 Shore – (together with the 2nd roller), ROLLER DIAMETER: 250 MM * Brushing unit HP 2.2 * Variable feed speed from 5 to 25 m/min. * Feed motor HP 7.5 * Size of abrasive belts: 2620 x 1180 mm. * Oscillating blowers for belt cleaning. * Vacuum pump for working table HP 7.5 * Lifting motor HP 0.33 * Weight 3000 kg. Approximately 20 new sanding belts – various grits Used machine in very good condition, tested in our workshop before delivery. Hnodpfxszbk U He Ak Djn