Used Alfa Laval Aalborg Micro for sale (102)

Condition: used, Year of construction: 1986, Alfa Laval Drehbürstensieb Credps Ahluusfx Aiiji

Condition: used, Year of construction: 2003, machine/vehicle number: PST45, Used SAP complete Pasteurizer 5000 LPHTechnical Specifications & Performance DataThis SAP pasteurizer system is a complete continuous-flow plate-and-tube pasteurization solution for still, non-carbonated beverages. Built around an Alfa Laval/Tetra Pak Clip 6-SR sanitary plate heat exchanger, the system is designed for controlled thermal treatment of liquid food products before filling. Its configuration supports production of non-alcoholic beverages with fruit content up to 5% and can process juices containing fibers and pulp up to approximately 8% when operated with the appropriate cycle and CIP procedures.Continuous flow rate: 3,500–5,000 L/hPasteurization temperature: 80°C to 95°CHolding time: 30 to 60 secondsHeat exchanger: Alfa Laval/Tetra Pak Clip 6-SRHeat exchanger internal volume: 62.0 LDesigned operating pressure: up to 6.0 barMaximum operating temperature: up to 110°CPasteurizer dimensions: 3300 x 2050 x 2370 mmManufacturing year: 2003Advanced Automation & Control SystemsThe pasteurizer is supplied with a control cabinet incorporating PLC control, enabling coordinated management of the process equipment. The system includes automatic valves, a temperature-maintenance system, holding tubes and a dedicated safety system. Pneumatic air demand is limited to valve actuation. Electrical consumption is primarily associated with two 4 kW pumps, while PLC consumption is minimal.The associated McQuay chiller is equipped for a 380–420 V, 3N~, 50 Hz electrical supply. Its total input is 12.19 kW at 25.3 A, with a nominal cooling capacity of 33.71 kW.Production Line Integration CapabilitiesDesigned for industrial packaging and beverage production applications, this second hand pasteurization system is intended to operate upstream of filling equipment. The process arrangement maintains the required pasteurization temperature and holding time before product transfer toward the filling area. A chiller is required in conjunction with the pasteurizer to lower product temperature before filling.The water-cooled process arrangement makes this equipment suitable for integration into a used bottling line handling still beverages, fruit beverages, juices and other liquid food products requiring continuous thermal treatment. The sanitary plate construction and clip-on gasket design support hygienic operation and CIP cleaning routines.Machine Condition & Maintenance HistoryThe system was previously used for the production of non-alcoholic beverages with fruit content up to 5%. It is scheduled to be taken out of service at the end of 2025. The supplied configuration includes the pasteurizer and the required chiller for pre-filling cooling duty.No electrical schematics or layout drawings are included. The PLC has no backup system.Operational Performance & VersatilityThe Clip 6-SR heat exchanger uses sanitary stainless steel plates with glue-free clip-on gaskets. The SR configuration is suited to high-viscosity media and juices containing fibers or pulp, while maintaining low pressure drop and reducing the risk of ... Crsds Aia D Sepfx Aiisi

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 4188894-2010, overall weight: 1,500 kg, The Alfa Laval HBPX 2000 is configured to operate with blood or fish processing glue water. Csds Ahrgpjpfx Aiiori No control panel is included, but a new panel can be purchased for an additional 15,000 euros. The machine is delivered with a complete set of tools and spare parts.

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. Crjdpfsg N Db Hox Aiisi • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: new, Year of construction: 2022, operating hours: 550 h, functionality: fully functional, machine/vehicle number: 5132324, overall weight: 2,200 kg, Alfa Laval Foodec 219 machine, serial number 5132324, year 2022, intended for food processing in dairies. Has only been used for 500 hours since new. Can be installed anywhere in Europe. Includes control panel, all pipes, etc., and a complete set of tools. Also includes service log and manual. Crodpfx Aij Ahrhbsiji

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: AA2328995, total height: 2,495 mm, total width: 2,280 mm, total length: 10,500 mm, overall weight: 6,000 kg, Equipment: documentation/manual, For sale is a dry cooler (air-cooled liquid cooler with forced convection) designed for outdoor installation. Air is passed over the finned heat exchanger, which contains the working fluid, for example, a water-glycol mixture. Alfa Laval VDDSE1008.1CD96 C4 ICM Dimensions approximately 10.5m x 2.28m x 2.95m (no heavy-duty transport required for transportation) Weight approximately 6 tons Csdpfx Ajz S U Naeiieri Cooling capacity 866.8 kW Airflow: 217476 m³/h Volume flow rate of cooling medium: 150.8 m³/h A cooling unit is being sold – it has already been dismantled and is ready for loading. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 1994, Decanter is brand new and unused. Maximum speed: 3,250 rpm Drum diameter: 353/202 mm Csdpo Ah Hh Rofx Aiisri Maximum solids density: 1.2 kg/dm³

Year of construction: 2014, condition: ready for operation (used), machine/vehicle number: 5125781, Alfa Laval ALDEC 45 Decanter Centrifuge – For Sale Alfa Laval ALDEC 45 industrial decanter centrifuge in very good working condition. The machine has been well maintained and is suitable for continuous solid-liquid separation applications. Key Specifications: Manufacturer: Alfa Laval Cedjzu S Uyopfx Aiieri Model: ALDEC 45 Year: 2014 Machine / Serial No.: 5125781 Maximum Bowl Speed: 4,200 rpm Main Motor: Approx. 22 kW Back Drive Motor: Approx. 5.5 kW Bowl Diameter: Approx. 360 mm Processing Capacity: Approx. 3–15 m³/h, depending on feed characteristics and separation requirements Continuous industrial operation Heavy-duty stainless steel construction Location: Türkiye Condition: Very good, ready for operation Suitable for various industrial separation applications, including wastewater treatment, sludge dewatering, chemical processing, food processing and other solid-liquid separation processes. The machine is available for inspection. Additional photos, technical details and videos can be provided upon request.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Alfa Laval / Krämer + Grebe VSM 200 | Vacuum cutter with loading and discharging system, 200l Manufacturer: Alfa Laval / Krämer + Grebe Model / Type: VSM 200 Machine serial number: 208/202/1 Year of manufacture: 1991 Loading system serial number: 274/547 Power supply: 380 V / 400 V, 50 Hz Bowl capacity: 200 liters Overall dimensions of the cutter: 2800 x 2300 x 1700 mm Dimensions of the stainless steel control cabinet: 1800 x 600 x 1700 mm Additional equipment: - Integrated vacuum pump - Integrated hydraulic loading lift (for 200 l meat carts, type: Beschick) - Disc-type filling unloader - External stainless steel control cabinet - 3 pallets with various spare parts and accessories Crjdo Ad U Apepfx Aiioi The Krämer + Grebe VSM 200 industrial vacuum cutter with a 200-liter bowl capacity is a legendary, extremely durable design from a renowned German manufacturer, used in the most demanding meat processing plants. The machine is used for chopping, emulsifying, mixing, and grinding meat under vacuum conditions. The vacuum technology allows for deep foaming and emulsification of the filling without air bubbles, which results in a perfect structure, better binding of water and fat, extended shelf life, and optimal color in cooked, raw, pâté-style, and frankfurter-style sausages. The heart of the machine is a stable, massive 200-liter stainless steel bowl connected to a precise knife head. The integrated hydraulic loading lift, adapted for standard 200-liter meat carts, facilitates and speeds up the loading process, and the hydraulic filling unloader allows for quick and complete emptying of the chamber after the cutting cycle. The entire system is controlled from a separate, free-standing control cabinet made entirely of stainless steel.

Condition: used, Year of construction: 2009, The *Alfa Laval M10-MBASE* is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. *Technical Specifications* *Type:* M10-MBASE *Heat transfer area:* 2.6 m² *Plate material:* Stainless steel Alloy 316, thickness 0.50 mm *Gasket material:* NBRFF Clip-On (Nitrile rubber) *Plate pack thickness:* 63 mm *Total weight:* 232 kg *Total volume:* 13 liters *Dimensions:* Height 672 mm, width 618 mm, depth 530 mm *Connection standard:* DIN NW100 *Bolts:* M20 *Expandable:* up to 17 additional plates *Operating Data* *Design pressure:* 10 bar *Test pressure:* 14.3 bar *Design temperature:* up to 120 °C *Minimum temperature:* 0 °C *Typical flow examples (according to datasheet):* Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa) Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa) Fruit juice: 240 L/h (heating 21 → 75 °C with 90 °C hot water, Δp ≈ 40–50 kPa) *Design Features* *Plates with parallel flow channels* ensure high efficiency and low pressure drop. *Clip-on gaskets* for easy maintenance and cleaning. *Robust frame and pressure plate construction* with M20 tightening bolts (length 360 mm). Crjdpfxj Ahlr De Aiiei *Flexible capacity expansion*, up to 17 additional plates can be installed. *User-friendly assembly* with clear A/B plate markings. *Typical Applications* Beverage pasteurization (e.g., wine, juice, beer) Hot water and cooling water circuits CIP cleaning systems General process heat transfer in industrial applications

Condition: used, System: Mobile dewatering system, decanter, and mobile centrifuge - used Application: Sludge dewatering Type: Alfa Laval DSNX 4250 Year of manufacture: 1996 Operating hours: 29,200 Generator operating hours: 31,640 (see enclosed nameplate) Codpfx Aijwmwrqeisri

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro AALBORG MICRO Credpfx Aeqy Nv Rjiisi The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode

Condition: good (used), Year of construction: 1983, functionality: unexamined, 2 pieces 1x Alfa Laval H10-RC Codor Nvg Sepfx Aiiori 1x Alfa Laval H10

Condition: used, Year of construction: 2014, machine/vehicle number: PST39, Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordinated sequence. The 285-second holding tube provides the retention stage required for yogurt pasteurization, helping maintain consistent process exposure before the product continues through the line. Control and monitoring arrangements should be integrated with the plant process system to supervise temperature, pressure, flow and product-routing conditions.Production Line Integration CapabilitiesThis pasteurization equipment can be integrated into a dairy processing or industrial packaging line upstream of filling equipment. It is suitable for handling yogurt and pure milk within a process layout that includes product reception, preparation, heat treatment, hygienic transfer and downstream packaging. The plate heat exchanger supports efficient thermal exchange in continuous processing, while the holding section provides a dedicated pasteurization stage for yogurt production.In a used bottling line or second hand dairy production installation, equipment of this type is typically connected to hygienic product piping, process utilities and downstream buffer, filling or packaging machinery. Integration planning should consider product viscosity, cleaning procedures, piping configuration and synchronization with the selected beverage production or food-processing line.Machine Condition & Maintenance HistoryThe main Tetra Therm Lacta machine was originally released from the factory in 2014. The Tetra Plex plate heat exchanger is described as original equipment for the machine. Operational Performance & VersatilityDesigned for dairy thermal processing, this pasteurizer supports yogurt pasteurization through its dedicated 285-second holding tube and can also be used for pure milk pasteurization through the integrated plate heat-exchange section. Continuous pasteurization systems are an important part of hygienic beverage production and industrial packaging operations where stable thermal treatment is required before filling or further processing.The Tetra Plex plate heat exchanger is engineered for product heating and cooling duties within the pasteurization process. Its dual-circuit pressure and temperature ratings support controlled operation in a process envi... Cedjz Ecmxjpfx Aiiori

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Buttermilk Pasteurization Line Complete buttermilk pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with a buffer tank, circulation pumps, process valves, flowmeter, and control cabinet. The system is designed for hygienic thermal processing of buttermilk in dairy plants. Capacity: 25,000 liters/hour Main components of the line: 1. Siersma Scheffers Stainless Steel Buffer Tank Serial number: Karnemelk Year of manufacture: 1995 Capacity: 1,000 liters Overall dimensions: Ø 1100 × 3000 mm Material: stainless steel (s/s) 2. APV Valves (4 units) High-quality process valves for food applications 3. Pomac Centrifugal Pump, type: CP19555 / 165 x 10 Serial number: 20080 Year of manufacture: 2007 Csdpextvftjfx Aiiori Capacity: 30 m³/h Power: 5.5 kW Dimensions: 700 × 350 × 450 mm 4. Endress + Hauser Flowmeter, model: Promag H / Promag 300 Dimensions: 350 × 200 × 200 mm Provides precise measurement of liquid food products 5. Samson Valve Dimensions: 560 × 300 × 300 mm Application: flow and pressure regulation in process systems 6. Alfa Laval / Tetra Pak Buttermilk Pasteurizer, type: C8-K8M Serial number: 30107-33855 Year of manufacture: 2012 Capacity: 559 liters Operating parameters: PS: 16.0 bar PT: 22.9 bar TS: 120 °C Dimensions: 3200 × 550 × 1850 mm High-performance heat exchanger system optimized for buttermilk processing 7. Hovap Centrifugal Pump, type: HP-5032/170 Serial number: 33740 Capacity: 35 m³/h Power: 7.5 kW Dimensions: 700 × 320 × 550 mm 8. IPBE Control Cabinet (s/s) Purpose: control and supervision of the buttermilk pasteurization line Dimensions: 620 × 230 × 770 mm The Alfa Laval / Tetra Pak buttermilk pasteurization line with a throughput of up to 25,000 l/h is a complete, integrated system for the thermal processing of dairy products. Use of components from Alfa Laval, Tetra Pak, Pomac, Hovap, Endress + Hauser, and APV ensures high reliability, durability, and process quality.

Condition: new, Nieużywany płytowy wymiennik ciepła Alfa Laval model AQ4T-BFG o powierzchni wymiany około 15 m2. Płyty wykonane ze stali ko 316L. Ciśnienie robocze do 12 bar, przy temperaturze do 150 C. Crode Agvzwopfx Aiioi

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. This, in very good condition draw through water/glycol cooler is equipped with: Cjdpfx Aioucnzwsijri 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Evaporator Alfa Laval Crjdjzxzfvepfx Aiisi -Type: THOR-Z 428-7 -Cooling capacity for R404A: 33 kW at DT8, 29 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 500 mm -Dimensions: 2500 x 1870 x 1100 mm -Capacity: 64 l -Weight: 228 kg -Stock quantity: 2 -Condition: used in very good condition

Condition: repair required (used), Year of construction: 2017, functionality: not functional, AS-07251-Alfa Laval Clarifier Module 10 m3/h ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) CLARIFIER MODULE, 316SS. Crsdpsw Ap I Aofx Aiiji Capacity min. 10,000 L/H Offering 4 identical units INCOMPLETE! Only for spare parts (Machine without bowl) Max. bowl speed 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 kW motor 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares, and manual Year of Manufacture 2017

Condition: good (used), Year of construction: 2018, Alfa Laval SRU2/018/LS Lobe pump 2018, stainless lobe pump on skid, with 1.1Kw motor, 3Ph Codpfx Ais Ad Rdvjiori

Condition: excellent (used), functionality: fully functional, SPX APV & ALFA LAVAL | Industrial CIP Valve Manifold (Hybrid Process Valve Block on a Frame) Manufacturers: SPX FLOW / APV and ALFA LAVAL Model / System Type: DELTA / UNIQUE MIXPROOF (Integrated single- and double-seat valve block) Control Heads: SPX APV (CU4 series model, including CU41N S AS-i) Control Heads and Actuators: ALFA LAVAL Main Component Identifier: Olympia BE-0112005 / DS53XVE03 Configuration Factory Code: 13085-089614-E Power and Communication: Industrial AS-Interface network bus, pneumatic actuator power supply Crsdpfxsy Ufgle Aiiji Construction Material: AISI 316L / 1.4404 grade stainless steel Supporting Structure: Factory-made stainless steel support frame with adjustable leveling feet This professional, hybrid valve manifold, based on components from SPX APV and Alfa Laval, represents a top-class industrial distribution hub. This device is the absolute core of liquid flow management systems, automatic process distributors, and advanced CIP (Cleaning In Place) stations. This type of valve block is a key pillar of infrastructure in large and medium-sized dairy plants, breweries, fruit and vegetable processing plants (juice, beverage, and concentrate production), as well as in the production of liquid ready meals, sauces, and in the chemical and food industry. The use of Mixproof technology (double-seat valves) from Alfa Laval, combined with SPX APV CU4 digital control, solves one of the biggest problems in liquid logistics: it allows the simultaneous flow of two completely different media (e.g., a finished food product and an aggressive cleaning agent, such as lye or acid) through a single valve block, without any risk of cross-contamination. When switching, special drain chambers immediately remove any remaining residue, providing a 100% guarantee of microbiological cleanliness. Thanks to AS-Interface communication, the manifold transmits real-time feedback signals about the exact position of each valve seat directly to the main PLC controller (e.g., Siemens S7). This prevents operator errors, reduces technological downtime, and allows for the simultaneous cleaning of one section of the pipeline while continuous production continues on the other. The compact mounting of the entire unit on a sturdy, stainless steel frame (so-called skid construction) dramatically reduces installation costs in a new or modernized plant. Key features and advantages: - Hybrid of best technologies (SPX APV + Alfa Laval): Combines the mechanical reliability and sealing of Alfa Laval stainless steel with the advanced control and monitoring electronics of the APV DELTA CU4 series. - Quick installation and space saving: A complete, compact valve block mounted on a stable mounting frame – delivered as a plug-and-play unit, minimizing the time required for line modernization.

Condition: used, functionality: fully functional, Item: MD-10622 - Small Open Cheese Vat, 650 L Older, open-type cheese vat for small-scale, on-farm production. Capacity: 650 L Stainless steel, with agitator and pressing tools. Double-jacketed and insulated. Csdpfx Aio Afn I Ujijri Manufactured by Alfa Laval.

Condition: used, Year of construction: 1994, System: Decanter / centrifuge, used Manufacturer: Alfa Laval Model: ALDEC 406 Mach. No. 512-0006.01 Crjdpfx Aijvz Dddeiei Year of manufacture 1994 Maximum drum speed 4000 l/min Drum inner diameter

Condition: used, Evaporator Alfa Laval -Type: THOR-Z 326-10 -Cooling capacity for R404A: 18 kW at DT8, 15 kW at DT7 -Fin spinning: 10 mm -Fans: 2 x 500 mm -Dimensions: 2050 x 2200 x 1000 mm -Capacity: 40 l Csdpfx Aozxziboiijri -Weight: 160 kg -Stock quantity: 4 -Condition: used in very good condition

Condition: used, Evaporator Alfa Laval Csdezxzgtepfx Aiisri -Type: THOR-Z 336-10 -Cooling capacity for R404A: 27 kW at DT8, 23.5 kW at DT7 -Fin spinning: 10 mm -Fans: 2 x 500 mm -Dimensions: 2900 x 1900 x 1150 mm -Capacity: 56 l -Weight: 222 kg -Stock quantity: 4 -Condition: used in very good condition