Used Food Processor for sale (8,175)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Hersteller: A·S·T·A Eismann GmbH Food Technology • Typ: DLP • Baujahr: 2017, Manufacturer: A·S·T·A Eismann GmbH Food Technology • Type: DLP • Year of manufacture: 2017 • Machine number: 903758 • Throughput: up to approx. 2,000 l/h • Siemens S7 with touchscreen • Heat recovery and product pump Bwjdpo Adrqqefx Aknsw • Feed tank: 100 l • Double jacket: 30 l • Operating pressure tank/double jacket: max. 6/3 bar • Temperature tank/double jacket: max. 90/100 °C • Stainless steel design, CE marking HOMOGENIZER: • Manufacturer: Bertoli S.r.l. • Type: H3007 • Year of manufacture: 2001 • Serial number: 1784 • Capacity: up to approx. 1,200 l/h • 7.5 kW, 380 V, 50 Hz, 15.4 A • Maximum working pressure: 18 MPa or 180 bar

Condition: excellent (used), Year of construction: 2018, 2500 litre system for cooking and cooling ready meals, soups, broths, fruit preparations, jams and marmalades, traditional and international dishes, sauces and pastes, confectionery. Installed new in 2018 at a cost of over £450,000 Bwsdpfjw Rn S Uex Aknsw

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15-35-19-01, total length: 29,011 mm, total width: 1,995 mm, total height: 1,250 mm, input voltage: 400 V, Equipment: documentation/manual, The device is in working condition, but it is currently out of service and stored in a dry and warm area. It can be started upon prior arrangement. All technical documentation and the CE declaration are included. A detailed description with specifications can be found in the attached .pdf documents. The maximum working height (height of the cooled material) is 6 cm. Bsdpfs Af Ng Nex Aknoww

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 14-35-15-10-02, The device is made of AISI 304 stainless steel. It has been lightly used and stored in a warm, dry area. The device is currently not in use, but it can be started after prior arrangement. Technical documentation, including a CE declaration, is available. Bwsdpfxe Af Ihcs Aknew - Total drum length: approximately 3100 mm. - Total drum height: approximately 2050 mm. - Inclination angle: 0 to -6º - Maximum drum diameter: 800 mm. - Motor rotational speed: 1.375 rpm - Gearbox ratio: 25.00 - Service factor: 2.2 - Rated motor power: 0.750 kW - Motor supply voltage: 230/400 V Additional information can be found in the attached photos.

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. Bwsdpfx Ajz Ad Dcoknew 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: like new (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, warranty duration: 12 months, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, year of last overhaul: 2026, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off right hand units, Full production capacity 60-70k per hour ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: • Available individually or as a complete package • Priority given to bulk buyers 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged Bodpfjyyl Aqjx Aknsww • Viewing can be organized by appointment 💰 Price: £20,500 Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Please get in touch for: • Additional photos • Full specifications • Video / demonstration • Bulk purchase enquiries All Test certs attached from Ishida for X Ray and radiation safe levels Viewings Welcome for full demonstration

Condition: good (used), functionality: fully functional, Maurer-Atmos Smoking Chamber for 3 Trolleys Bwedpfx Akextvh Ionew Manufacturer: Maurer-Atmos Device type: Smoking and cooking chamber with friction smoke generator The Maurer-Atmos smoking chamber is designed for thermal processing (smoking, drying, cooking) of meat, fish, and sausage products. Equipped with a friction smoke generator, this unit allows for both hot and cold smoking, ensuring excellent product quality, color, and aroma. Capacity: 3 smoke trolleys Internal dimensions: 3100 × 1100 × 2000 mm Overall dimensions: 4000 × 1800 × 3300 mm Smoke generator type: Friction smoke generator The Maurer-Atmos chamber is a reliable, industrial solution for meat processing plants and food processors, enabling uniform smoking and thermal processing of up to three trolleys simultaneously. The use of a friction smoke generator allows for efficient consumption of smoking material and consistent, high-quality results.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: S40Basic, Compact size, high productivity vegetable processing machine: ​ The commercial vegetable processing machine, cabbage shredder S40 is a productive, compact size commercial food processing machine that is intended for cabbage shredding, slicing, High productivity 500-1000 kg/h, high-quality materials as food-grade stainless steel AISI 304. Made for small and middle-size producing companies. Bodpfx Aoffwgvsknoww General Features: Productivity 500-1000 kg/h; High quality, long-lasting stainless steel cutting knives (up to 100 tons between sharpening); Disc diameter of 40 cm, grants, that you can cut small cabbage heads that are sliced in half. Universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; (additional attachments) Compact size, can be equipped with wheels and easily transported; Easy to clean, can be washed with low-pressure water; All food contact elements made of stainless steel; Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(additional option) Machine motors 0.75kW in the ​standard version Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Features fan assist / air circulation (electric). Supplied with 15 x bakery racks. Located in Northern Ireland and ready to collect. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Date of manufacture - 1992 ✅ Rating 500-000 General overview ℹ️ Bwedpfxjxb Alvj Aknsw Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Bwjdpfx Aksxg Tfqonsw

Condition: like new (used), JBT Industrial Finisher / Refiner – Stainless Steel JBT industrial finisher in stainless steel, designed for the continuous refining of pulps, purees, and food products, allowing the separation of the usable fraction from peels, seeds, coarse fibers, and other undesired solids. This type of equipment is typically used after crushing, extraction, or preheating operations to obtain a product with a finer and more homogeneous texture before subsequent stages of concentration, heat treatment, or packaging. The system operates using an internal rotor and a perforated sieve or screen, performing continuous mechanical separation between the refined product and solid waste. MAIN FEATURES -Manufacturer: JBT -Type: Industrial finisher / refiner -Application: refining and separation of pulps -Automatic and continuous processing -Rotary refining system -Internal separation sieve / screen -Solid-liquid / pulp-waste separation -Continuous product feed -Independent product and waste discharge -Construction primarily in stainless steel -Driven by an electric motor -Closed processing chamber -Robust design for industrial operation -Access for cleaning and maintenance -Integrable into continuous processing lines PROCESS Bwodpfxoyz Ttms Aknew The product, previously crushed or processed, enters the JBT finisher continuously. Inside, the rotor drives the product against a perforated refining surface. The pulp, puree, or liquid fraction that meets the required size passes through the screen, while larger particles remain retained and are conveyed to a separate discharge. This process allows operations such as: Refining of pulps and purees Separation of peels and seeds Removal of coarse fibers Reduction of undesired solids Homogenization of the texture Preparation of product before concentration Pre-treatment prior to aseptic sterilization APPLICATIONS Especially suitable for tomato industries, fruit and vegetable processors, juice, pulp, puree, concentrate, and sauce manufacturers. Depending on the screen and configuration installed, it can be used for tomatoes, fruits, and various vegetable products, forming part of industrial extraction and refining lines. It can be integrated with crushers, preheaters, pumps, evaporators, aseptic sterilizers, and fillers. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), functionality: fully functional, OMIP K7 Automatic Pitting and Destoning Machine – Stainless Steel The OMIP K7 is an industrial pitting and destoning machine designed for the automatic processing of stone fruits, performing cutting and pit separation operations to prepare the product for subsequent processing, preservation, or packaging stages. Manufactured by OMIP, the K7 is designed for continuous operation, individually positioning the product before performing the mechanical pitting and pit extraction operation. Its configuration allows for the automation of a preparation stage that requires precision and consistency to minimize manual handling. Its construction, primarily in stainless steel, makes it particularly suitable for industrial fruit processing lines. MAIN FEATURES -Manufacturer: OMIP -Model: K7 -Type: Automatic pitting/destoning machine -Application: Stone fruits -Function: Fruit cutting and pit separation -Automatic and continuous processing -Product feeding system -Individual fruit positioning -Multiple processing stations -Mechanical cutting system -Pit extraction/separation -Continuous discharge of processed product -Construction primarily in stainless steel -Motorized drives -Safety guards -Hygienic design for the food industry -Integrable into complete processing lines PROCESS The fruit is fed into the feeding area, where the system distributes and guides it to the different work positions. Each piece is positioned in a controlled manner before entering the cutting and destoning mechanism. The machine performs the fruit opening and mechanical pit separation, allowing the product to be prepared for further processing. Depending on the line configuration, it can be integrated with: Bwsdpjwnxkwofx Aknjw Fruit washers Sorting systems Selection and inspection tables Peelers Conveyors and elevators Post-washing systems Fillers IQF freezing systems Canning lines Packaging equipment APPLICATIONS Particularly suitable for canning industries, fruit processors, frozen fruit manufacturers, and fruit and vegetable processing plants that need to automate pitting and destoning. This type of equipment can be used for peaches, apricots, and other compatible stone fruits, depending on the size, variety, maturity stage, and installed configuration. The OMIP K7 provides an industrial solution to achieve continuous and regular processing, reducing the need for manual operations during the preparation of stone fruit. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Dimensions: 4900 mm x 1500 mm x 2300 mm. Bjdpfx Asv Abm Eokneww

Condition: like new (used), functionality: fully functional, Optical Sorter / Color Detector PROTEC BICS 2000 40C – Stainless Steel The PROTEC BICS 2000 40C optical color sorter is designed for the inspection, sorting, and automatic rejection of products based on color differences within food processing lines. The equipment allows for the analysis of the product as it passes through the inspection zone, detecting units, particles, or materials that do not meet the established color parameters. Non-conforming products can be automatically separated from the main flow, improving the uniformity and quality of the final product. Its configuration with a feeding system, optical inspection zone, and automatic rejection mechanism enables continuous operation on industrial sorting lines. MAIN FEATURES - Manufacturer: PROTEC - Model: BICS 2000 40C - Type: Optical sorter / color detector - Application: Automatic sorting and classification - Product inspection using optical technology - Detection of color differences - Automatic separation of non-conforming products - Continuous industrial processing - Product feeding and distribution system - Optical inspection zone - Automatic ejection / rejection system - Construction primarily in stainless steel - Integrated control panel - Configurable selection parameters Bjdpfxoynkdno Aknoww - Hygienic design for the food industry - Integrable into automatic processing lines PROCESS The PROTEC BICS 2000 40C is designed to automatically inspect the product as it passes through the equipment. The product is distributed in a controlled manner before passing through the optical inspection zone, where the system analyzes its color characteristics and compares them with the previously established parameters. When out-of-specification product is detected, the rejection system automatically separates it, allowing the accepted product to continue to the next stage of the process. This system can be used for: - Color sorting - Removal of defective product - Separation of units outside specifications - Improvement of product uniformity - In-line quality control - Automatic classification APPLICATIONS Particularly suitable for processors of fruits and vegetables, legumes, nuts, frozen products, and other food industries that need to automate visual product selection. Depending on the installed configuration, it can be used for different solid and particulate products where color is a relevant parameter for determining their quality or classification. The combination of PROTEC technology, optical sorting, and automatic rejection provides an efficient solution for improving quality control in food processing industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Industrial Flourer / Breadcrumb Coating Machine – Stainless Steel Automatic industrial flourer / breadcrumb coating machine, designed for the continuous and uniform application of flour, breadcrumbs, or other dry coatings onto food products before subsequent frying, baking, or freezing operations. The equipment incorporates a continuous conveying system that guides the product through the coating area, where the dry ingredient is distributed over its surface. This type of machine allows coating both the top and bottom of the product, depending on the configuration and the material used. MAIN FEATURES - Type: Industrial flourer / breadcrumb coating machine - Automatic application of dry coatings - Continuous operation - Product conveying system - Hopper / tank for flour or breadcrumb material - Controlled coating distribution - Coating of the product surface - Recovery and recirculation system for excess material, depending on configuration - Adjustment of product flow and coverage - Construction primarily in stainless steel - Open design for easy cleaning and inspection - Mobile structure on wheels - Electrical control panel - Guards on moving parts - Designed for integration into industrial food preparation lines PROCESS The product enters continuously via the conveyor belt and passes through the dry coating application area. The flour, breadcrumbs, or breading mix is distributed around the product to achieve the most uniform coverage possible. Excess material can be separated from the product and returned to the coating circuit, depending on the installed configuration. Once floured or breadcrumb coated, the product automatically continues to the next operation. Bwsdszxwycepfx Aknew It can be integrated with: Formers Pre-dusters / pre-flouring machines Batter applicators Coating machines Systems for removing excess coating Continuous fryers Ovens IQF freezing tunnels Coolers Packaging lines APPLICATIONS Especially suitable for meat industries, fish processors, manufacturers of breaded products, pre-cooked foods, and ready-made dishes. Depending on its configuration, it can be used for: Nuggets Hamburgers and formed products Chicken fillets Meat products Fish and seafood Croquettes Vegetable products Other breaded or floured foods The machine allows for the automation of the dry coating application, improves its uniformity, and maintains a continuous flow of product to the subsequent processing stages. Machine available for inspection. Additional technical information, working width, production capacity, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), VORAN EP1000 Industrial Pulper / Refiner – Stainless Steel VORAN EP1000 industrial pulper, designed for the separation, crushing, and refining of fruits and vegetables, allowing for the extraction of pulp or puree and the simultaneous separation of skins, seeds, pits, and other unwanted solid fractions, depending on the processed product and the installed screen. The product is continuously fed into the machine, where a rotating system drives it against a perforated sieve or screen. The usable fraction passes through the screen, while the solid residues are conveyed to a separate outlet. Its stainless steel construction and hygienic design make it particularly suitable for industrial lines for the production of juices, purees, pulps, and products derived from fruits and vegetables. MAIN FEATURES -Manufacturer: VORAN -Model: EP1000 -Type: Industrial pulper / refiner -Continuous processing system -Separation of pulp and solid residues -Rotating extraction / refining system -Internal sieve or screen -Continuous product feed -Separate outlets for product and residues Bwjdpfszxcp Aex Aknow -Construction mainly in stainless steel -Driven by an electric motor -Closed process chamber -Access for cleaning and maintenance -Hygienic design for the food industry -Integrable into fruit and vegetable processing lines PROCESS The pre-prepared product is introduced into the VORAN EP1000, where the rotating system conveys and presses it against the perforated surface of the screen. The pulp, puree, or liquid fraction passes through the perforations and is collected by a specific outlet, while the larger parts that do not pass through the screen are evacuated separately. This principle allows for the following operations: Extraction of pulp and puree Refining of product Separation of skins and seeds Separation of coarse fibers Removal of solid residues Preparation of product for subsequent processes APPLICATIONS Especially suitable for fruit and vegetable processors, manufacturers of juices, purees, pulps, jams, sauces, and preserves. Depending on the screen and configuration installed, it can process different fruits, berries, tomatoes, and vegetables, and can be part of extraction and pulp preparation lines. The VORAN EP1000 can be integrated with washers, mills, crushers, pumps, tanks, pasteurizers, refiners, and filling systems. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Industrial Linear Cooler – Stainless Steel Industrial linear cooler in stainless steel, designed for the continuous cooling of food products after cooking, scalding, pasteurization, or other heat treatment processes. The equipment allows for the gradual and controlled reduction of the product temperature as it moves through the different cooling zones, providing a high-capacity solution for continuous processing industrial lines. Bsdpfjx S Iu Tex Aknoww Its stainless steel construction, long processing length, and integrated transport system make it especially suitable for fruit, vegetable, canning, frozen food plants, and other food applications. MAIN FEATURES - Type: Industrial linear cooler - Application: Continuous cooling of food products - Continuous processing system - Automatic product transport - Several sections/process zones - Water circulation and distribution system - Integrated process pipes, pumps, and valves - Primarily stainless steel construction - Robust structure for industrial operation - Large treatment surface - Continuous discharge system - Top access for inspection and cleaning - Hygienic design for the food industry - Integrable into automatic processing lines PROCESS The product from a previous thermal stage enters the linear cooler continuously, where it is transported through the different zones of the equipment. During the process, the product temperature is gradually reduced using a water-cooling system, according to the configuration and operating conditions of the installation. The linear design provides a controlled dwell time and allows for maintaining a continuous product flow between the different production phases. It can be installed after: - Linear cookers - Scalders - Heat treatment systems - Vegetable preparation lines - Pasteurization processes And subsequently connected to: - Inspection belts - Draining systems - Sorting equipment - IQF freezing tunnels - Filling and packaging machines - Weighing and dosing systems APPLICATIONS Especially suitable for fruit and vegetable processors, canning companies, frozen food manufacturers, and other food industries that need to quickly reduce the product temperature after a thermal stage. Depending on its configuration, it can be used with vegetables, legumes, fruits, and other food products processed continuously. Its large capacity, stainless steel construction, and linear configuration provide a robust solution for continuous cooking and cooling industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), HERMASA TUNIPACK-500 Automatic Packaging Machine The HERMASA TUNIPACK-500 is an automatic packaging machine designed for the automatic placement and packaging of products into containers within industrial food processing and preservation lines. Manufactured by HERMASA, a specialist in machinery for the canning industry, the TUNIPACK-500 is designed to automate the product loading and distribution phase into the container, reducing manual handling and providing a continuous and uniform process. Its industrial-grade construction in stainless steel, combined with the automatic feeding and control system, allows for integration into highly automated production lines. MAIN FEATURES -Manufacturer: HERMASA -Model: TUNIPACK-500 -Type: Automatic packaging machine -Automatic feeding and packaging system -Controlled product handling -Continuous industrial operation -Robust stainless steel construction -Integrated transport system -Control panel with HMI screen -Protections and safety systems -Designed to reduce manual handling -Integrable into existing canning lines -Hygienic construction for the food industry APPLICATION The HERMASA TUNIPACK-500 is designed to automate the packaging operation within an industrial canning line. The product is fed into the machine and managed automatically during the packaging process, facilitating its correct introduction and arrangement into the containers before continuing to the next stages of production. It can be integrated with: Product feeding systems Container conveyors Product preparation equipment Dosers Can sealing machines Inspection systems Bodpfezw A Shox Aknjww Container washers Autoclaves and sterilization systems Labeling machines Complete automatic canning lines APPLICATIONS Particularly suitable for canning industries and fish processors looking to automate the packaging process and reduce manual operations on the production line. The HERMASA TUNIPACK-500 provides an industrial solution to achieve a continuous flow of product and facilitate its subsequent closing and processing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Set of 3 Industrial Vacuum Cookers – Stainless Steel Set of 3 industrial vacuum cookers made of stainless steel, designed for cooking, heating, and processing food products under controlled vacuum conditions. The set consists of three process vessels installed on a common frame with an elevated work platform, providing a robust solution for industrial batch production. Vacuum processing allows for cooking and concentration operations at reduced pressure, enabling operation at temperatures lower than those used in conventional atmospheric processes, depending on the product and recipe. MAIN FEATURES -Quantity: 3 vacuum cookers -Type: Industrial vacuum cooking/processing system -Application: Cooking, heating, and processing of food -Robust construction in stainless steel -3 independent process vessels -Configuration for batch production -Integrated piping and valve system -Vacuum processing -Bottom product discharge -Individual drive systems -Inspection/access hatches -Stainless steel work platform -Guardrails and access system -Designed for professional food processing environments -Integrable into complete production lines APPLICATION The system is designed to process food products in closed vessels under vacuum conditions. Working at reduced pressure allows the cooking and heat treatment conditions to be adapted to the characteristics of each product. The configuration of three vessels also provides high flexibility for managing different batches or production stages within the same facility. Depending on the product, it can be used for: Vacuum cooking Heating and heat treatment Concentration Mixing and homogenization Reduction of liquid products Sauce production Processing of fruits and vegetables Preparation of fillings and formulated products Bsdpfx Aszwv Ipeknoww APPLICATIONS Especially suitable for food manufacturers, sauce and condiment producers, fruit and vegetable processors, prepared meal manufacturers, and industrial kitchens. Depending on its configuration, it can be used to produce sauces, jams, preserves, fruit preparations, vegetable products, fillings, concentrates, and prepared meals. The configuration of 3 industrial vacuum cookers offers a particularly interesting solution for facilities that require production flexibility and simultaneous processing of different batches. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 1997, Stainless Steel Tank 500 Liters with SCABA Agitator and Measurement Technology Manufacturer: Food Tech Tank Type: Stainless steel tank with agitator Capacity: 500 l Year of manufacture: 1997 Quantity available: 2 units Agitator: SCABA Motor power: 0.37 kW Protection class: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Measurement technology: Endress+Hauser Liquiphant Supply voltage: 10–55 V DC Equipment and Accessories Agitator fully assembled Internal mixing system with agitator blades Manhole with cover Bwjdpfx Ajyxvwpeknow Filling opening with grate insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated into support frame Discharge at the bottom with connection Pipe fittings and valves

Year of construction: 2010, condition: good (used), Food Tools 5AFCE Cheese cutter Bodpfx Akjy Ayb Tonoww Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries

Condition: like new (used), Horizontal Mixing Tank ROSSI & CATELLI 3,000 L – Stainless Steel ROSSI & CATELLI 3,000-liter horizontal mixing tank, designed for the mixing, homogenization, and intermediate storage of liquid and semi-liquid products in industrial processes within the food industry. Manufactured by ROSSI & CATELLI, the equipment features a horizontal cylindrical configuration and includes a motorized agitation system, allowing the product to remain in motion and achieve uniform mixing throughout the process. Its 3,000-liter capacity and stainless-steel construction make it a particularly interesting solution for facilities that require processing large volumes of product. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Type: Horizontal mixing tank -Capacity: 3,000 liters -Horizontal cylindrical configuration -Agitation/mixing system -Driven by a motor-reducer -Stainless steel construction -Integrated support structure -Top inspection/access hatch -Sanitary product connections -Product inlet and outlet -Integrated piping and connection system -Designed for batch industrial processes -Hygienic construction for the food industry -Integrable into existing processing lines APPLICATION The ROSSI & CATELLI 3,000 L is designed to perform mixing, homogenization, accumulation, and product maintenance operations within an industrial line. The agitation system keeps the components in motion, promoting uniform distribution and helping to prevent separation or sedimentation during certain phases of the process, depending on the characteristics of the product. It can be integrated with: Preparation and mixing systems Sanitary pumps Heat exchangers Pasteurizers Homogenizers Dosing systems Buffer tanks Filling equipment Complete processing lines APPLICATIONS Especially suitable for juice and beverage industries, fruit and vegetable processors, sauce manufacturers, purée producers, concentrate manufacturers, and other food industries that require a large-capacity tank with a mixing system. Depending on its configuration, it can be used with juices, purées, sauces, tomato products, concentrates, fruit preparations, and other liquid or semi-liquid products. The combination of ROSSI & CATELLI, 3,000-liter capacity, horizontal configuration, and agitation system provides a robust solution for industrial mixing and intermediate storage processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request. Bjdjzw E Aijpfx Akneww

Condition: like new (used), FISHBAM Double-Door Static Autoclave / Cooker – 4 Cages FISHBAM double-door static autoclave / cooker with a capacity of 4 cages, designed for the cooking, pasteurization, and heat treatment of food products in industrial batch processes. Its double-door configuration allows for loading from one end and unloading from the opposite end, facilitating the organization of the production flow and its integration into facilities with separation between entry and exit zones. The equipment features a large-capacity horizontal chamber, industrial-grade construction in stainless steel, and an automatic system for controlling process parameters. MAIN FEATURES -Manufacturer: FISHBAM -Type: Industrial static autoclave / cooker -Capacity: 4 cages -Configuration: double door -Static operation -Batch heat treatment -Horizontal chamber -Stainless steel construction -Large-diameter doors -Mechanical safety locking system -Automatic process control -Integrated control panel -Pressure indicators -Process piping and valve system -Designed for industrial operation -Integrable into cooking and heat treatment lines PROCESS The 4-cage FISHBAM is designed to perform controlled heat treatments on food products. The loaded cages are placed inside the chamber, and once closed, the programmed cycle is executed, controlling the different phases of the treatment. Depending on the application and equipment configuration, it can be used for cooking, pasteurization, and other batch heat treatment operations. The double-door configuration allows for establishing a continuous workflow, with loading and unloading from opposite sides of the equipment. It can be integrated with: Cage loading and unloading systems Cage conveyors Bwjdpfjyufk Nox Aknsw Transfer systems Cooking lines Cooling systems Product handling equipment Complete food processing lines APPLICATIONS Especially suitable for canning industries, fish and seafood processors, meat products, vegetables, ready meals, and other food industries that require industrial batch heat treatment processes. The combination of 4 cages, static operation, and a double door provides a particularly interesting solution for facilities that need high processing capacity and an organized flow between the loading and unloading areas. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Industrial Automatic Onion Peeler – Stainless Steel Industrial automatic onion peeler, designed for the continuous removal of the onion’s outer skin within professional vegetable processing lines. The equipment provides an automated solution for peeling and cleaning onions, reducing manual handling during product preparation and facilitating its transfer to the next stages of the process. Its robust stainless steel construction makes it particularly suitable for industrial food environments where hygiene, ease of cleaning, and corrosion resistance are essential. MAIN FEATURES -Type: Industrial onion peeler -Application: onions -Function: removal of the outer skin -Automatic and continuous processing -Robust stainless steel construction -Designed for industrial food processing plants -Suitable for continuous production -Accessible construction for cleaning and maintenance -Adjustable support legs -Motorized processing system -Integrable into existing onion processing lines -Compatible with feeding and discharging conveyors APPLICATION The machine is designed for the automatic peeling of onions as part of an industrial vegetable preparation and processing line. Onions are continuously fed into the equipment, where the peeling system removes the dry outer skin. Subsequently, the product can be discharged to the next stage of production. It can be integrated with: Bwjdpfx Akjzwv D Rjnjw Onion feeding systems Elevators and conveyors Inspection tables Washing equipment Choppers and slicers Dicing equipment Sorting and grading systems Packaging equipment APPLICATIONS Particularly suitable for vegetable processors, onion processing plants, manufacturers of frozen products, ready-made meals, and food industries seeking to automate onion preparation. It is suitable for facilities where a continuous supply of peeled onions is required before cutting, slicing, dicing, cooking, freezing, or further processing operations. Its stainless steel construction allows it to be integrated into both existing and new onion processing facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Slicer, Wedging, Coring & Stick Cutting Machine PND SS8 The PND SS8 is a professional fruit and vegetable cutting machine designed for the efficient processing of fresh produce. This versatile fruit processing machine is suitable for cutting, segmenting, and coring a wide range of products, including apples, pears, mangoes, kiwis, citrus fruits, pineapples, tomatoes, potatoes, cucumbers, and peppers. Thanks to its interchangeable knives, the machine produces precise slices, wedges, sticks, and segments with consistent quality. The PND SS8 offers a capacity of up to approximately 50 fruits per minute, making it ideal for fresh-cut companies, fresh produce processors, and the food industry. The robust stainless steel construction meets the highest hygiene standards and is easy to clean. Product-contact parts can be quickly removed, significantly reducing cleaning and maintenance time. The compact machine can be easily integrated into an existing production line. Its precise cutting technology minimizes product waste while maintaining optimal quality of the finished product. The PND SS8 is suitable for both small and large production volumes and provides a reliable solution for efficient fruit and vegetable processing. If you are looking for an industrial fruit cutting machine, apple cutting machine, mango coring machine, vegetable cutting machine, fresh produce processing machine, or fresh-cut machine, the PND SS8 is a durable investment combining speed, precision, and high processing capacity. Production capacity: 3,000 pieces/h Functions: Cutting, coring (pitting) Cutting shapes: Slices, wedges, sticks Installed cutting knife: Mango coring knife Voltage: 400 V (3 + N, 50 Hz) Power: 1 kW Weight: 580 kg Year of manufacture: 2014 Dimensions (W x D x H): 4300 x 2030 x 2550 mm Bwsdpfx Akozur Srjnew