Used Filler for sale (908)

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Aseptic filler for drums Asepsystems with 2 heads 1" plug with homogenizer and sterilizer. Nodpjq Rdhujfx Ad Nocl

Condition: used, Year of construction: 2002, TETRA PAK TBA 21-1000 SQUARE ASEPTIC FILLER Ncodpfox Agmyox Ad Nsl YOM 2002 V050 52.000 RUNNING HOURS CAPACITY 7000 CARTONS PER HOUR VERY GOOD CONDITION COMPLETED BY THE TCA88 1000 SQUARE APPLICATOR (SOME PARTS MISSED) DISMANTLED AND STORED IN POLAND, LASK CITY.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, Nedortnlaspfx Ad Nocl - a cap dispenser, - laminar flow, - spare parts, - belt conveyor 2200mm x 40mm, sold without peristaltic pump. YOM 2010 EXCELLENT CONDITION

Condition: new, Year of construction: 2024, functionality: fully functional, New filling machine suitable for dispensing liquids. Suitable for: - Milk - Water - Alcohol - Disinfectant Ncodpfx Asrivxcjd Nol - Etc. This is a very robust machine that runs on air and 220V power—plug and play! Ideally suited for filling small batches. Only a very small compressor is required to operate the machine, and one can be supplied if desired. We recommend a minimum compressor size of 12L. The filling machine comes with a 1000ml cylinder, allowing a maximum of 1000ml to be dispensed per cycle. By running multiple cycles, larger volumes can also be filled. For example, to fill 2500ml, you can run two cycles of 1250ml each. The smallest fill per stroke is 100ml, and any volume between 100ml and 1000ml can be achieved in a single cycle. We also offer models equipped with cylinders that can fill up to 5000ml per stroke. Equipped with a suction hose, enabling the machine to draw product directly from a drum or IBC. The machine includes both a foot pedal and an automatic mode. In automatic mode, continuous filling is possible, making it easy and efficient to process larger quantities. The foot pedal allows batch filling at your own pace. Depending on the operator and the fill volume, the machine is capable of filling between 15-25 units per minute, making it very fast and efficient. The machine weighs approximately 15/20kg and can easily be placed on a table. Constructed entirely from stainless steel, this is a very high-quality machine. For any questions, please email us. We are happy to assist you with this or other machines. We also supply a labelling machine that makes an excellent combination with the filling machine. We strive to respond to your inquiries within 24 hours. Of course, you can also reach us by phone. We are available on working days from 09:00 to 17:00.

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. Ncedpfx Ajxm Rmxod Njl The machine list is available in the documents along with information about the company. The machines have seen little use since 2019 and remain in good condition.

Condition: ready for operation (used), Can filler for several can sizes and formats suitable. For example for fish or meat cans or vegetables. Ncjdpfjvy Trhex Ad Nsl

Condition: ready for operation (used), Year of construction: 2017, We sell 20 l hydraulic sausage filler on photos Ncedpfx Adew Hc T Hj Nel

Condition: used, Year of construction: 1996, Overview This isobaric PET bottle filling and capping machine was manufactured in 1996 by German company Krones. The block machine includes an ALCOA capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected.  Technical data  filling and capping machine as a block system number of filling stations: 140 number of capping stations: 30 isobaric filling system suitable to carbonated soft drinks capping system: ALCOA Kupi 30/1080 for screw caps  cap feeding system: Gassner  capacity: 36.000/h at 1,5L  including neck handling system  bootle lifting cylinders direction: left-right / clockwise Ncsdpfx Aoydbrbed Nsl

Condition: used, Year of construction: 1966, Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  Capacity: 2,500 bph Formats: Prepared for 0.33 L Longneck Filling temperature: 6°C Overhaul & refurbishment details General overhaul in 2016: Pre-evacuation New rotary ball connection New stainless-steel table New electrics New valve control cabinet in stainless-steel design 0.33 L guiding set Sihi vacuum pump Renewed in 2023: Seals on lifting cylinders and filling valves Vacuum and overpressure valves equipped with new seals and springs Ncodpfx Adoyb Sdvs Nol

Condition: used, Year of construction: 2022, Overview  This dual isobaric counter-pressure filling line for bottles and cans was manufactured in 2022 by the Spanish company González Tratamiento. The system includes a Firulais 6 Latas-Botellas filler and MPC-AS self-adhesive labeller, offering a compact and flexible solution for small and medium-sized breweries or beverage producers. The filler is still in operation and was maintained regularly. The owner is selling it because the equipment exceeds their current production capacity. Technical data  Capacity: Up to 2,000 bph (operated between 500–1,000 bph) Filling System: Isobaric, counter-pressure Filling Valves: 5 Bottle Formats: 0.33 L and 0.75 L (adjustable) Can Formats: Standard 0.33 L Closure Systems: Integrated can seamer and crown capper Construction: Stainless steel Working Pressure: up to 3 bar CO₂ System: Pre-evacuation for cans, vacuum for bottles Controls: Touchscreen with adjustable parameters Mobility: On wheels with adjustable legs Condition: In use, regularly maintained Scope of Delivery  Filler | González Tratamiento | Firulais 6 Latas-Botellas | 2022 | 5-valve isobaric filler with integrated can seamer and crown corker Labeling machine | González Tratamiento | MPC-AS | 2022 | Self-adhesive labeler, wrap-around, for various bottle sizes, incl. thermal printer for compliance and expiry date marking   Ncodpfx Aoxn Uf Isd Nol

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) Capacity: Up to 3,000 bottles/hour (330 ml) Filling system: 12 counterpressure long-tube valves Capping system: 4-head crown capper (26 mm) Bottle format: 0.33 L (prepared) Working pressure: 2.0 – 2.2 bar Working temperature: 0 – 4 °C (optimal) Oxygen pickup: 10–12 ppb dissolved oxygen Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump Product pump: Included CIP system: Automatic and programmable Machine direction: Left to right Construction: AISI 316L stainless steel Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) Capacity: 2,000 – 6,000 bph Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm Labelling stations: 1 (option for second station) Label type: Self-adhesive (also supports polypropylene labels) Bottle infeed: Screw conveyor system Sensors: Self-adjusting photocell for transparent labels Control system: Processor board with inverter-based speed regulation Output system: Smoothing unit with adjustable perforated belt Transport system: 1.5 m conveyor with traction motor Rotary tables: 1 infeed + 1 outfeed, both motorized Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer Function: Seals top and bottom of cartons Adjustments: Width and height adjustable Conveyor: Plastic rollers, 1.5 – 4.5 m   Ncedpsyb S S Hofx Ad Njl

Condition: used, Year of construction: 2020, Overview  This semi-automatic can filling machine was built in 2020 by the Italian manufacturer EMMA SRL and is in excellent condition as it has been regularly serviced by the manufacturer. The machine is immediately available and is being sold due to a capacity expansion by a larger model from the same manufacturer. Technical details Output: approx. 350-400 cans per hour Formats: 330 ml (Sleek); format parts for 440 ml included Filling system: Isobaric with CO₂ pre-ventilation, CO₂ tunnel, CO₂ lid gassing Seaming: Integrated single-head can seamer Power supply: 0.8 kW, 220V, 50 Hz Compressed air consumption: 180 L/min at 6 bar Dimensions (L x W x H): 1100 x 1130 x 1160 mm Weight: 280 kg Ncjdpfx Aowrixyed Nel

Condition: used, Year of construction: 1998, Overview This isobaric filler was manufactured in 1998 by the Italian company Cortellazzi (SACMI). The machine is in working condition, regularly maintained by the operator, and has mainly been used for water. It will be sold including format parts and spare parts. Technical data  Capacity: 12,000 bph (operated at ~10,000 bph) Formats: 0.5 L, 1.0 L, 1.5 L PET bottles Filling system: Isobaric, 50 filling valves Rinser: 50 rinser stations Capper: 10 heads Products: Water, flavored water, CSD (minor share) Control: Siemens S7 Additional features: Central lubrication, format parts, spare parts Ncjdpfx Aexbf R Usd Nol

Condition: used, Year of construction: 2015, Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data Capacity: Approx. 250 bph Formats: Adjustable for different bottle sizes Filling system: Isobaric with CO₂ pre-injection into filling bell Valves: 2 Max. working pressure: 5 bar Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Electrical supply: Single-phase, 220 V   Nodpfexd Ez Eex Ad Necl

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available Ncjdpfovy D Adjx Ad Nsl

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C & 1500bph 15°C Currently set up for: Glass Bottles: 0,187ml 0,375ml 0,750ml 1500ml  Caps/Corks Cork (boucheuse liège) Screw cap Decorative Cap (Champagne style) Incl. CIP and wine filtration Nsdjv Aag Depfx Ad Nocl

Condition: used, Year of construction: 2002, Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  Capacity: 44,000 bph (500 ml glass bottles) Formats: 500 ml glass bottles Filling principle: Isobaric (mechanical filling system) Number of filling stations: 144 Crowner: 24 stations (crown cork) Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-400 Control cabinet: Air-conditioned, stainless steel Operating hours: approx. 30,000 (as of Nov. 2024) Direction: Left to right Scope of Delivery Filler: KHS Innofill DMG SVF 144-KK24 Crown corker with 24 stations Control cabinet and operator panel Bottle clamping star wheels CIP cups High-pressure injection (HDE) Bottle shower at discharge Bottle table in roof optic Central lubrication system VPN remote access capability Safety housing (updated in 2016, with flushing system) Touch panel Cork feeding unit by NSM Filling level inspection system: Krones Checkmat (2015) Ncodpfjwif Dgjx Ad Nol

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pick&Place neckhandling system Integrated foaming system Neumo butterfly valves Njdpfx Adewiizpe Njcl

Condition: used, Year of construction: 2010, Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data Capacity: Up to 600 bags/hour (depending on product viscosity and format) Volume range: 0.5L – 3L Pressure: min. 6 bar Bag type: Doypack with screw cap Filling principle: Gear pump with high-precision flowmeter Operation: Semi-automatic (manual bag positioning, automatic filling and capping) Frame: Stainless steel Cleaning/Sterilization: Integrated cleaning and sterilization functions Control panel: Touch screen Scope of Delivery  AIT DOYPACK semi-automatic filling and capping machine Integrated gear pump and flowmeter Touch screen control panel Nodswiu Hkopfx Ad Njcl

Condition: used, Year of construction: 2021, Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Cap hopper  Cap control Nodpfomk I Dtsx Ad Njcl

Condition: used, Year of construction: 1993, Overview The Triblock consists of a rinser, filler and capper and was manufactured by Sasib/Sarcmi in 1993. It is an isobaric machine for the production of still and sparkling water or CSD. Techn. Details Capacity: 22.000 bph Worked formats: PET 0,45l & 0,66l Cap type: PCO 1881 plastic screw Number of rinser stations: 90 Number of filling stations: 90 Number of capping stations (AROL capper): 15 Rinsing machine with integrated recirculation system Filling with differential pressure system Filling machine equipped with star clutches with quick format change Capper equipped with quick format change Original mechanical filling valves brand Simonazzi Revamping of electrical panel with Siemens S7 E300 PLC Cap hopper not included Ncedpjn Ek Niefx Ad Nsl

Condition: used, Year of construction: 2012, Overview The filler was built in 2012 by Italian manufacturer Framax. The filler comes with a Framax labelling machine. The machines have been regularly maintained and is already dismantled. Both machines can be viewed in person. Techn. Details Capacity: 1,800 bph (max. 2,200 bph) Processed format: 0,33 L Crown cap Filling monoblock | Framax | RFC‐09/08/1‐C 2K A/P | 2012 Rinser positions: 9 Filler positions: 8 Capper positions: 1 Suitable for natural beer Type of filling valve: EVO2 (15 mm) Max. diameter of bottle: 115 mm Min./ Max. height of bottle: 200 mm/ 350mm Dimensions: Length: 4,500 mm Width: 1,250 mm Height: 2,500 mm Ncjdpsrlf Tqsfx Ad Nel

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Ncedpfx Adoukkvno Nol

Condition: used, Year of construction: 2004, Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details Manufacturer: NATE (Czech Republic) Model: Veral 60 Year of Manufacture: 2004 Number of Filling Stations: 60 capacity: 20.000 bottles/h Filling Method: Counter pressure (overpressure) Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB Condition: Well-maintained, fully operational Nsdpfx Asyb Si Ssd Nscl

Condition: used, Year of construction: 1999, Overview  This KHS filling monobloc was manufactured in 1999. The filling monobloc is still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. It also includes an accumulation table. Technical data  Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Ncjdpjwvl Dgjfx Ad Njl