Used Processing Vessel for sale (20,269)

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs. Click on the link below to see a video of the machine running. Specifications: Capacity: 528 gal Material of construction: stainless steel Type Of Heads: welded dished top and welded dished bottom Internal Pressure: 29 PSI Jacket Pressure: 58 PSI Pedpfx Adoxt Ehdenerd Internal Temperature: 273°F Type of stainless: stainless steel Legs/Lugs: Yes

Condition: excellent (used), Here we offer an MDI glass-breaker machine. MDI Glass Breaker Machine Breaker CH1000 Dimensions Machine: Length 1700 mm x width 1500mm x height 1500 mm Mass machine: About 500kg Belade area: About 650 mm x 900 mm Workpiece voltage: Vacuum plate Type: Breaker CH1000 Predsd Nx Niepfx Adnsd Condition: used/used Delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We can answer more questions on the phone for you.

Condition: used, Cheese whey processing plant 15,000 Litres/Hour Plant consists of:- 250 litre stainless steel tank 15,000 litre/hr product pump complete with 5.5kw motor Tetra plex C8 SR plate heat exchanger SWEP gasketed hot water preparation unit Hot water pump complete with 3.0kw motor Automatic steam on/off valve Steam modulating valve Steam trap & Filter Holding tube for 25 seconds at 15,000 litres/hour in 3" pipe pipping and valving including 3 off x 2" 3 port flow divert valves Prjdpfx Adexxi R Tjnjd RTD's for hot water, hot whey & cold whey High level probe for the balance tank connection to UF Allen bradley for operation Full complete specification can be sent on request.

Condition: used, GENERAL Remarks: Pipe wall thickness 2 mm (1.7 mm in bend areas); 6 height-adjustable feet; minor dents in the insulation jacket; insulation jacket is missing in 2 sections (see photos) Overall width: 1,550 mm Overall height: 3,200 mm Overall length: 6,530 mm Insulation: available Miscellaneous: 8 minutes hot holding Pipes DN 80 Length: 647 meters Manufacturer: Tetra Pak Approx. weight: 7 t Location: Bremen Condition: used Last application: dairy Predpoxqclnsfx Adnod INSULATION Insulation jacket material: stainless steel PIPEWORK Pipe material: AISI304 (V2A) 1.4301

Condition: excellent (used), Year of construction: 1980, Cryogenic storage tank for liquid vessel Oxygen, Argon, Nitrogen, Methane, Helium and Carbon dioxyde LIN, LOX, LAR, LNG, LHe und CO2, hydrogen. Podpjfz Diqjfx Adnerd We would also be pleased to prepare an offer for you or provide you with further information about other vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: like new (used), Year of construction: 2019, MÜLLER Processing MF 150 Mobile Drum Handling up to 150 kg The like-new stainless steel mobile lifting column was designed for transporting and lifting drums in GMP environments. Drum holder Ø 360 - 560 mm Capacity: 140 Ah Psdow S T Dlepfx Adnsrd Load capacity: 150 kg Lifting height: 30 - 340 cm Manufacturer: Müller Year of manufacture: 2019 Space requirements: 80 x 240 x 195 cm

Condition: excellent (used), Set of 2 autoclaves for wood impregnation. Podpfx Adjw S N Awonord Internal diameter: 1950 mm Total length: 13,500 mm + 3 tanks for impregnant

Condition: excellent (used), MDI Type: Laser cutting system LC 800 MDI laser cutting system Laser cutting system LC 800 with UC-2000 laser controller and MSA control system 9010 LCD for gas warning system Technical data: Machine data: Machine dimensions: (L x W x H) 2,520 mm x 2,090 mm x max. 1,945 mm Control cabinet dimensions: (W x D x H) 600 mm x 600 mm x 2,000 mm Machine weight: Approx. 2,500 kg Control cabinet weight: Approx. 1,000 kg Control: Siemens S7-300 and Siemens Simotion Spindle drives: THK Rotation axis: Harmonic Drive Table size: 810 mm x 680 mm Max. substrate size: 650 mm x 780 mm Number of Cutting heads: 2 (laser for glass cutting, knife for foil cutting) Number of cutting tables: 1 Psdpfxed N Erqe Adnjrd Workpiece clamping: Lasercut frame for laser cutting, vacuum plate for foil cutting Noise level:

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Psdpfx Adetrdyrsnsrd Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Condition: good (used), Year of construction: 2011, Vibratory feeder for sale, price is for one unit Prsdpfx Adewydkgoned

Condition: excellent (used), Cryogenic storage gas tank for liquid Oxygen (LOX), Argon (LAR) , Nitrogen (LIN) gas vessel Volume: 6640L Prsdpeihfk Iofx Adnsd Working pressure: 20 bar Export from EU We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information about other vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, KUIPERS FOOD PROCESSING ID.NO. 2824 Kuiper's reliable conveyor belt made entirely of stainless steel can also be adjusted to adjust the inclination of the belt. H in 115 cm H out 185 cm. Band width 49 cm Dimensions 186 x 80 cm Height 200 cm. Pjdpou Iw Umsfx Adnsrd

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( 2 Bıçak), - Conforms to CE standards. - Possibility of lapping the middle register connections of PVC and aluminum profiles. - Up to 30 degrees at different angles, possibility of lapping the middle register connections of profiles - Pneumatic profile clamping system B7ull38nwa - Ability to move the milling motor with a pneumatic cylinder. - Easy series change thanks to the separator button (60-70) OPTION Prodeq U S Ahjpfx Adned - Hydro check system - Cooling System

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: Podpfx Adetzmifenord -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: LU0183, Roll forming line for solar profiles, both for trackers and fixed structures. High processing speed, with mechanical press and 10 CNC-controlled punching tools. Working speed up to 30 m/min. Working thickness from 0.8 to 3.0 mm and maximum strip width 450 mm. Pedpfx Adjwxfbwenjrd

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. Predpfx Ajwnx H Eodnjd As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom.

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 211 ALUMİNYUM PVC ÇOKLU ORTA KAYIT ALIŞTIRMA MAKİNESİ, - Notching (milling) process with adjustable linear motor movement - 5 adjustable resting systems for different profiles - Quick blade change feature that makes work easier - Notching of center register profiles between 1/6 pieces - Profiles are fixed in the machine with pneumatic vertical and horizontal clamps - Independent operation of vertical and horizontal clamps - Spare knife storage cabinet on the front of the machine - Notching (milling) of 2.5 meter long profiles by means of support arm Prsdoq U S Dispfx Adned - Maximum profile notch height ( h ) 140 mm OPTION - Spray cooling system - 220 volt operation

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Prodpfsrrglyox Adnjd Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( Seri Bıçak Değiştirme Sistemli), - Robust mechanical structure capable of processing aluminum profiles with high quality - Medium recording practice of aluminum profiles in -45 / +45 degree angle ranges - Easy blade group change system - Easy angle adjustment with mechanical stops - Adjustable resting system according to four different profiles Podpfjviq Rysx Adnjrd - Cutting speed adjustment with hydropneumatic system - Knife storage rack (4 pcs.) - Cutter fluid spray system - Max. process diameter : 160 mm - Max. Blade : 200 mm - Min : 90 mm

Year of construction: 2012, operating hours: 6,047 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 24,000 rpm, travel speed (max.): 60,000 mm/min, working length: 7,500 mm, machine/vehicle number: 0809-M_001327515, number of slots in tool magazine: 16, number of axes: 14, TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. cross-section W x H / length for single bar processing: 400 x 300 mm / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 mm / 300 mm Maximum steel wall thickness: 5 mm Max. traverse speed X-axis: 60 m/min Max. traverse speed Y-axis: 60 m/min Max. traverse speed Z-axis: 30 m/min Spindle speed range: 1 - 24,000 rpm Milling motor power: 16 kW A-axis rotation: ±110° continuous C-axis rotation: ±220° continuous Tool holder: HSK-F63 Max. tool dimensions mill/drill (d/l): Ø 50 mm / 200 mm Max. tool dimension disc milling cutter (d): Ø 500 mm Number of stations in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 10 Profile systems with quick-change system: Yes Max. number of profiles per machine setup: Up to 10 profiles Number of profile punching units: 2 Automatic repositioning of clamps during 2 machining steps: Yes MACHINE DETAILS Predoxxiuxjpfx Adned Dimensions & Weight Dimensions (L x W x H): 15 x 4 x 5.64 m Weight: 12 t Operating Hours Power-on time: 24,613 h Spindle running time: 6,047 h EQUIPMENT Quick-change system for profile installations Automatic clamping fixture positioning 19" TFT color touch display Schüco CAM software Machine operation based on Windows 8 with menu navigation Self-programming without NC/CNC knowledge required

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 24 kW (32.63 HP), pressure (max.): 120 bar, MACHINE DETAILS Performance Data Power: 24.0 kW Voltage: 400 V Frequency: 50 Hz Max. Pressure: max. 120 bar Predpoxxkd Iefx Adnod EQUIPMENT Horizontal end machining center Simultaneous double-sided end machining of shaft-shaped parts

Condition: like new (used), Year of construction: 2005, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: will advise enquirer, pressure: 200 bar, this machine has very little use and is as new condition Podpfxjwgkhrj Adnerd

Year of construction: 2020, condition: ready for operation (used), Main Drive Pjdexz H Rcjpfx Adnsrd Number of axis 4 Movement X-Axis Movement 4000 mm Z-Axis Movement 500 mm Y-Axis Movement 1670 mm This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: good (used), Similar in operation to Dohmeyer CryoRoll freezer. Packo developed these freezers to be used for high performance IQF freezing of small pieces of meat, seafood, cheese, pizza toppings, fruits and vegetables. The rotary drum is injected with CO2 down to -60 degrees C or nitrogen down to -110 degrees C. This unit was used in a cheese manufacturing facility which has recently closed, they were running shredded and diced cheese through the machine. We have a large quantity of conveying and machinery available from this facility. Psdpfx Asxz E Ndjdnsrd

Condition: excellent (used), HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) Psdpfx Adexphnlonjrd The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display