Used vertical turning lathes for sale (206)

Condition: excellent (used), Year of construction: 1999, Control: Siemens Sinumerik 840D Kdodpfxovvmkij Ahvsi Working range: max swing diameter: 300 mm Main spindle: minimum spindle speed: 28 rpm maximum spindle speed: 7000 rpm maximum torque: 188 Nm turning diameter: 1250 mm swing diameter: 1160 mm turning height: 800 mm faceplate diameter: 1000 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, TECHNICAL DATA MACHINE SPECIFICATION WORKING RANGE • Max chuck diameter. 260 mm • Max swing diameter. 260 mm • Max machining diameter. 220 mm • Max part length. 110 mm • Travel X axis. 570 mm • Working stroke Z axis. 250 mm • Travel Z axis. 200 mm CLOSED STANDARD AUTOMATION • Number of carrier frames for workpiece diameter 80 to 220 mm. 14 pieces • Number of carrier frames for workpiece diameter 30 to 160 mm. 18 pieces • Number of carrier frames for workpiece diameter 30 to 85 mm. 30 pieces • Max total load. 120 kg PICK UP SWITCH POINTS • Pressed. 1 mm • Over pressed. emergency stop. 5 mm • Pickup spring travel max. 30 mm CHAIN SYSTEM • Chain length. 182 inches • Chain pitch. 1 inch (25.4 mm) • Chain tension at 20 carrier frames. 400 N • Chain wheel. Z equals 30 • Gear ratio. i equals 100 • Motor revolution per belt revolution. 540 LOADING TIME • Loading time. 2 to 4 seconds MAIN SPINDLE • Spindle flange according to DIN 55026. Size 6 • Spindle bearing front diameter. 110 mm • Max spindle speed. 4500 rpm (5500 optional) MAIN DRIVE. AC ASYNCHRONOUS MOTOR. TYPE 1MB241H • Power at 100 percent duty cycle. 18 kW Ksdpfjx Elf Aex Ahvsdi • Power at 40 percent duty cycle. 27 kW • Torque at 100 percent duty cycle. 202 Nm • Torque at 40 percent duty cycle. 303 Nm • Corner speed. 850 rpm FEED DRIVE • Rapid feed speed X axis. 60 m per minute • Rapid feed speed Z axis. 30 m per minute • Feed force X and Z. 5.5 kN • Ball screw diameter X and Z. 40 mm • Acceleration. 5 m per second squared TOOL CARRIER • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max tool length including holder. 190 mm • Max swing diameter. 740 mm TOOL CARRIER WITH DRIVEN TOOLS • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max speed. 6000 rpm • Corner speed. 3000 rpm • Max torque at 10 percent duty cycle. 45 Nm • Max torque at 40 percent duty cycle. 30 Nm • Max torque at 100 percent duty cycle. 15 Nm ELECTRICAL EQUIPMENT • Operating voltage. 400 to 480 V • Control voltage DC. 24 V • Control voltage AC. 230 V • Frequency. 50 or 60 Hz • Connected load. 42 kW • Supply fuse rating. 63 A • Electrical design standard. VDE 0113 DIMENSIONS AND WEIGHT • Length. 2680 mm • Length including chip conveyor. 3820 mm • Width. 2040 mm • Height. 2400 mm • Machine weight. approx 6500 kg NOISE EMISSION • According to DIN 45635. • Measured sound pressure level. 78 dB(A) during continuous cutting on a cylindrical test part.

Condition: good (used), Year of construction: 2003, operating hours: 41,852 h, Workpiece Specifications: Max Swing Diameter: ~2500 mm (98.4 inches) Max Turning Height: ~2000 mm (78.7 inches) Max Workpiece Weight: ~10,000 kg (22,046 lbs) (depending on configuration) Spindle Specifications: Spindle Drive Power: ~50 kW (67 hp) (approximate, depending on model) Spindle Speed Range: ~10-500 rpm (variable, depending on model) Spindle Taper: Typically a large taper suitable for heavy-duty turning. Table Specifications: Table Diameter: ~2500 mm (98.4 inches) Table Load Capacity: ~10,000 kg (22,046 lbs) Axis Travel: X-Axis Travel: ~2000 mm (78.7 inches) Z-Axis Travel: ~2000 mm (78.7 inches) Tooling: Kedpfsvy Ti Hox Ahvjdi Tool Holder Type: Typically VDI or similar heavy-duty tool holders. Number of Tools: Depending on the turret configuration, typically 12 or more tools. Accuracy: Positioning Accuracy: ~0.01 mm (0.0004 inches) Repeatability: ~0.005 mm (0.0002 inches) Dimensions and Weight: Machine Weight: ~30,000 kg (66,139 lbs) (approximate) Machine Dimensions: ~5000 x 4000 x 4000 mm (196.9 x 157.5 x 157.5 inches) (approximate) Additional Features: Coolant System: High-pressure coolant system for efficient chip removal and cooling. Automation: Optional automation systems for loading/unloading of workpieces. CNC Control: Advanced CNC control for complex machining tasks.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Kedpfx Ahsym Na Sevodi Machine can be inspected and demonstrated under power.

Condition: used, Webster & Bennett 36” Vertical Borer, Retro fitted with a Siemens Control, 6 Tool Turret. S/No. 6912-4 Kdsdpfx Aheyrdt Rsvoi Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm Ksdpfox Irzvjx Ahvodi spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2760174, (Please tell us your offer price) Kdodsyiaruopfx Ahvoi Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 104440, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Kdjdpfxsyh Sc Ne Ahvei Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2005, Technical details: Kedomcibwspfx Ahvjdi swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) *

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Manufacturer: EMAG Model: VL 3 Year of manufacture: 2006 Chuck diameter: 160 mm Swing diameter: 210 mm X-axis travel: 400 mm Z-axis travel: 200 mm Ksdpfx Aheympwkevjdi Loading time: 2–4 s Main spindle Spindle flange according to DIN 55026 Size: 5 Spindle bearing diameter (front): 80 mm Max. speed: 7500 rpm Main drive AC asynchronous motor Power at 100/40% duty cycle: 16/24 kW Torque at 100/40% duty cycle: 102/158 Nm Feed drive Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Feed force in X and Z: 5 kN Ball screw diameter in X and Z: 40 mm Turret Disc turret, 12 stations, cylindrical shank holders to DIN 69880 Shank diameter: 40 mm Driven tools: Maximum output: 12 kW Max. speed: 6000 rpm Max. torque: 37 Nm Full power from: 3000 rpm Turret indexing time: 0.3 s Dimensions and weight Length: 2500 mm Length incl. chip conveyor: 3500 mm Width: 1900 mm Height: 2300 mm Approx. weight: 5500 kg Includes 9 driven tools (axial and radial) and various spare parts Subject to prior sale and errors

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 200 mm, spindle speed (min.): 6,000 rpm, overall weight: 6,500 kg, power: 40 kW (54.38 HP), year of last overhaul: 2023, Equipment: documentation/manual, Both machines form a single unit. Year of manufacture: 2003, fully functional and still in operation. See photos. The machines are equipped with a chip conveyor serving both machines. A coolant tank was subsequently installed. Accessories include various holders, jaws, and one new AGW. Kdsdpoxq Arusfx Ahvsi The machine can still be inspected under power and in operation.

Condition: like new (used), Year of construction: 2009, operating hours: 26,000 h, travel distance X-axis: 725 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, spindle motor power: 11 W, spindle speed (min.): 5,000 rpm, total length: 3,171 mm, total height: 2,648 mm, total width: 4,254 mm, overall weight: 6,000 kg, CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Ksdpfsxf Hlbsx Ahvedi Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours Under power: 38.000 Cutting Time: 26.000 Basic machine dimensions / weight Length mm: 3.171 Width mm: 4.254 Height mm: 2.648 Weight kg: 6.000

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Control: SIEMENS Sinumerik 840D Solution Line Working area: Maximum workpiece height: 200 mm Maximum workpiece diameter: 250 mm Maximum swing diameter: 390 mm Maximum distance spindle stop to turret: 580 mm Minimum distance spindle stop to turret: 240 mm Spindles Maximum spindle speed: 5,500 rpm Spindle power per spindle: 37.7 kW Maximum spindle torque per spindle: 300 Nm Spindle nose with short taper (DIN 55026): A6 Axis travel X-axis travel (within working area with closed covers): 365 mm X-axis total travel: 886 mm X-axis travel (over turret center): -20 mm Y-axis travel: +100/-80 mm Kodpfx Ahox Rwv Dsvedi Z-axis travel: 250 mm 12-position disc turret Capto C5

Condition: good (used), Year of construction: 2006, machine/vehicle number: 66078, TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm X-axis travel: 626 mm Z-axis travel: 250 mm Spindle bearing diameter: 32 mm Nominal speed: 1,200 rpm X-axis rapid traverse speed: 60 m/min Z-axis rapid traverse speed: 30 m/min Turret positions: 12 MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - WPS pallet conveyor - KNOLL system (2010) - SAUTER turret (12 places) Kdedowfdddepfx Ahvoi - Documentation available

Condition: used, Year of construction: 2006, Technical details: turning diameter: 250 mm swing diameter: 260 mm Kodpfsxc Idgex Ahvsdi Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools! *

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 100864, Technical Specifications: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse Y: 30 m/min - Standard closed automation (number of loading nests per workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100/40% duty cycle: 18 / 27 kW - Torque at 100/40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holder shank according to DIN 69880: 12 - VDI40 - Number of turret positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical Design: Ensures optimal chip evacuation and easy loading/unloading operations. - Control System: GE Fanuc Series 18i TB. - High Precision: Positioning accuracy in X and Z axes: ±0.001 mm (Heidenhain linear scales). - Main Spindle: High power and wide speed range. Ksdexxttfspfx Ahvodi - Automated Loading/Unloading: Parts are automatically fed and removed via integrated automation. - Driven (live) tools: Enables drilling and milling operations in addition to turning. - Chip conveyor included. - Documentation: Electronic manual not available; printed book manual available. Machine Status: Operational, in working condition.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010521, Technical specifications: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading magazines by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum spindle speed: 4500 rpm Kedpfxsxxt D Ro Ahvodi - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holder for cylindrical shank DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Max. tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Total machine dimensions: Length = 2680 mm (3820 mm with chip conveyor), Width = 2040 mm, Height = 2400 mm - Weight: 6500 kg Main Features and Capabilities - Vertical design: Enables optimal chip removal and easy loading/unloading - Control system: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X/Z axes is ±0.001 mm thanks to Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic version not available, printed manual incomplete Machine status: NOT WORKING - Spindle drive - X-axis linear scale - Safety access door (Euchner) - Emulsion solenoid valves x2

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 106374, Technical characteristics: Work Area - Chuck diameter: 160 mm - Maximum weight of chuck + workpiece: 45 kg - Maximum workpiece diameter/height: 100/400 mm - Distance spindle nose to origin of tailstock: 795.5 mm - X1/X2 working stroke: 340 mm / Rapid traverse in X: 30 m/min - Z1/Z2 stroke: 625 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading nests by workpiece diameter): 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm) Main Spindle - Spindle according to DIN 55026: Size KK5 - Maximum speed: 8,500 rpm - Power at 100% / 40% duty cycle: 34 / 26.5 kW - Torque at 100% / 40% duty cycle: 75 / 48 Nm Tailstock - Interface: MK3 - Clamping force: 120 N/bar - Clamping stroke: 5 mm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 – BMT65 - Number of positions: 2 x 12 (1 gripper per turret) - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 120 A - Connected load: 45 kVA Dimensions - Total dimensions: Length = 5,300 mm with chip conveyor, Width = 1,760 mm, Height = 3,650 mm - Weight: 7,500 kg Main Features and Capabilities - Vertical design: Optimized chip evacuation and automatic loading/unloading - Control: GE Fanuc FS 32i - High precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automation: EMAG O-type – Parts are loaded and unloaded automatically via integrated automation - Live tools: Allows drilling and milling operations - Tool life monitoring with sister tool management - Chip conveyor, coolant unit, switchable dual cartridge filter, high pressure pump (15 bar) - Fully enclosed working area, LED light in working area - Documentation: Available both electronically and as hardcopy book Machine Status: NOT WORKING Kdsdpfx Aoxxtkwehvoi - X-axis drive - Five electrical switches (Siemens) - Hydraulic pump - Operator panel (in stock, needs installation) - Valve chiller - Pressure switch for oiling unit - Emulsion tank pump - Four emulsion circuit switches (electrovalves) - Pressure switch for hydraulic circuit - Complete hydraulic block

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 109238, Technical characteristics: Work Area - Chuck diameter: 260 mm - Maximum workpiece weight: 150 kg - Swing diameter: 280 mm - Maximum workpiece diameter/height: 200/200 mm - X-axis stroke (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5 to 6 seconds - Standard closed automation (number of loading stations by workpiece diameter): 14 (80–200 mm), 18 (30–160 mm), 30 (30–85 mm) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Motor output at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Tool Holder with Driven Tools - Toolholders with cylindrical shank according to DIN 69880: 12 positions – BMT65 - Number of positions: 12 - Maximum tool length including holder: 200 mm - Maximum speed: 6,000 rpm - Maximum torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 100 A - Connected load: 36 kVA Dimensions - Overall dimensions: Length = 5,300 mm (with chip conveyor), Width = 2,300 mm, Height = 3,650 mm - Weight: 9,000 kg Main Features and Capabilities: - Vertical design for optimal chip removal and easy workpiece loading/unloading - CNC control: GE Fanuc FS 32i B - High positioning accuracy on X and Z axes: ±0.001 mm (Heidenhain linear scales) - Main spindle: High power output and wide speed range - In-process measurement: Marposs T25 measuring probe Ksdpfoxxkgpsx Ahvjdi - Automated loading/unloading: EMAG O-Type. Parts are loaded and unloaded via integrated automation - Driven tool capability extends machining operations to drilling and milling - Chip conveyor, coolant unit, switchable double cartridge filter, high-pressure pump (15 bar) - Tool life monitoring with sister tool management - Completely enclosed work area with workstation lighting - Documentation: Electronic version available; printed version incomplete Machine status: NOT WORKING - Requires replacement of hydraulic actuator and electrical motor - Live tool motor needs attention

Condition: used, Year of construction: 2007, functionality: limited functionality, machine/vehicle number: P-30008793, Technical characteristics: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Standard closed automation (number of loading nests by workpiece Ø: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle mount: DIN 55026, size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Kdsdpfxjxxr Rpo Ahvoi Tool Turret with Driven Tools - Toolholder shank per DIN 69880: 12 stations – VDI40 - Number of positions: 12 - Maximum tool length incl. holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 37 Nm, at 25%: 26 Nm, at 100%: 14 Nm Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall dimensions: L=2,680 mm (3,820 mm with chip conveyor), W=2,040 mm, H=2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - Control: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High torque and wide speed range - Automated loading/unloading: Integrated automation feeds and removes parts - Driven/live tools: Enables drilling and milling operations in addition to turning - Chip conveyor - Documentation: Electronic not available, paper manual available Machine status: WORKING - Operator panel safety switch broken

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010522, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026, Size 6 !!! Brand new, replaced in 2024 !!! - Maximum speed: 4,500 rpm - Power, 100% / 40% duty cycle: 18 / 27 kW - Torque, 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holders with cylindrical shank to DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: Kdjdjxxkh Topfx Ahvoi - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: GE Fanuc Series 18i TB - High precision: Positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and broad speed range - Automated loading/unloading: Integrated automation system for part feeding and removal - Driven tools: Capability for drilling and milling operations - Chip conveyor - Documentation: Electronic unavailable, partial hard copy/manual available Machine status: NOT WORKING - Hydraulic solenoid valves: 4 units - Coolant (emulsion) pump defective

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 109239, Technical characteristics: Work Area # Chuck diameter: 260 mm # Maximum workpiece weight: 150 kg # Swing diameter: 280 mm # Maximum workpiece diameter/height: 200/200 mm # X-axis travel (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN # Z-axis travel: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN # Loading time: 5-6 sec # Standard enclosed automation (number of loading stations based on workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle # Spindle according to DIN 55026: Size 6 # Maximum speed: 4,500 rpm # Power at 100% / 40% duty cycle: 25 / 18 kW # Torque at 100% / 40% duty cycle: 280 / 200 Nm Kedpfoxxir Djx Ahvedi Turret with Driven Tools # Tool shank interface according to DIN 69880: 12 positions - BMT65 # Number of tool stations: 12 # Maximum tool length including holder: 200 mm # Maximum speed: 6,000 rpm # Maximum torque: 27 Nm at 10% duty cycle, 14 Nm at 100% duty cycle Electrical Equipment # Operating voltage: 400 - 480 V, 100 A # Connected load: 36 kVA Dimensions # Overall dimensions: Length = 5,300 mm (with chip conveyor), Width = 2,300 mm, Height = 3,650 mm # Machine weight: 9,000 kg Main Features and Capabilities: # Vertical design: Optimized for chip removal with easy loading/unloading. # CNC control: GE Fanuc FS 32i B. # High precision: Positioning accuracy in X, Z axes ±0.001 mm with Heidenhain linear scales. # Powerful main spindle: High power and broad speed range. # In-process control: Marposs T25 measuring probe. # Fully automated loading/unloading: Emag O-Type; workpieces are automatically loaded and unloaded via integrated automation. # Driven tools: Enables drilling and milling operations within the machine. # Tool life monitoring with sister tool management. # Chip conveyor and coolant filtration unit: Micron filter with paper filter, 40 bar pumps (suitable for filtering two machines). # Fully enclosed work area, internal work light. # Documentation: Electronic version available (book version incomplete). Machine status: OPERATING

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 109242, Technical specifications: Work Area - Chuck diameter: 260 mm Kdjdpfx Aoxxit Uohvei - Maximum weight: 150 kg - Swing diameter: 280 mm - Max. workpiece diameter/height: 200/200 mm - X-axis stroke (effective travel): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading positions per workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Tool Turret with Driven Tools - Tool holder with cylindrical shank per DIN 69880: 12 positions - BMT65 - Number of tool stations: 12 - Max. tool length (incl. holder): 200 mm - Max. speed: 6,000 rpm - Max. torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Electrical System - Operating voltage: 400 – 480 V, 100 A - Connected load: 36 kVA Dimensions - Overall dimensions: Length = 5,300 mm (with chip conveyor), Width = 2,300 mm, Height = 3,650 mm - Weight: 9,000 kg Main Features and Capabilities: - Vertical design: Optimized for efficient chip removal and easy part loading/unloading - CNC control: GE Fanuc FS 32i B - High precision: Positioning accuracy (X/Z axes) ±0.001 mm; equipped with Heidenhain linear scales - Powerful main spindle: High output and large speed range - In-process measurement: Marposs T25 probing system - Fully automated loading/unloading: EMAG O-Type—parts are loaded and removed by integrated automation - Live tooling: Allows for drilling and milling operations beyond standard turning - Tool life monitoring with sister tool management - Chip conveyor and coolant filtration unit: Micron filter with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, illuminated for safe and easy operation - Documentation: Electronic documentation available (hard copy not complete) Machine status: Operational (in production)

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 108113, Technical Characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse Z: 30 m/min Kdjdpfx Ahjxxip Aevei - Standard automation with closed system (number of loading nests by workpiece diameter: 14/(80–200), 18/(30–160), 30/(30–85)) Main Spindle - Spindle interface per DIN 55026: Size A5 - Maximum spindle speed: 6000 rpm - Power (100% / 40% duty cycle): 18.1 / 13.9 kW - Torque (100% / 40% duty cycle): 77 / 59 Nm Tool Holder with Driven Tools - Tool shank per DIN 69880: 12 – BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque (10% duty cycle): 27 Nm; (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions (L x W x H): 4350 mm (with chip conveyor) x 1600 mm x 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Optimized for chip removal and easy loading/unloading - CNC Controller: GE Fanuc FS 32i B - High precision: Positioning accuracy in X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and broad speed range - In-process control: Marposs T25 measuring probe - Automated loading/unloading: Integrated automation for feeding and removing parts - Live tools: Capability for drilling and milling operations - Tool life monitoring and sister tool management - Chip conveyor & Knoll coolant filtration unit with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, with work area lighting - Documentation: Electronic version available, printed booklet incomplete Machine Status: - NOT WORKING - LT motor defective, repairable - Operator panel, safety switch, and two buttons broken and need replacement

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 102920, Technical Characteristics: Work Area - Maximum diameter of clamping plate: 250 mm - Maximum turning diameter: 270 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 175 mm - X-axis travel: 660 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 300 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading stations by workpiece diameter: 14/(80...200 mm), 18/(30...160 mm), 30/(30...85 mm)) Main Spindle - Spindle according to DIN 55026: Size 6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Turret with Driven Tools - Tool holders per DIN 69880: 12 x VDI40 - Number of positions: 12 - Max. tool length (including holder): 190 mm - Max. speed: 6,000 rpm - Max. torque at 10% duty cycle: 37 Nm, at 25%: 26 Nm, at 100%: 14 Nm Electrical Equipment - Operating voltage: 400 V - Connected load: 36 kW / 80 A Dimensions - Total dimensions: Length: 3,120 mm (4,185 mm with chip conveyor), Width: 2,266 mm, Height: 3,200 mm - Weight: 7,500 kg Main Features and Capabilities: Kedpexxiwyefx Ahvjdi - Vertical design: Enables optimal chip evacuation as well as easy loading and unloading - Control: Siemens 840D - High precision: Positioning accuracy in X, Z, and Y axes ±0.001 mm, Heidenhain linear scales - Main spindle: High power and broad speed range - Automated loading/unloading: Automated workpiece loading and removal via integrated system - Driven (live) tools: Supports live tooling for extended machining range, including drilling and milling - Part detection sensor with compressed air gauge through spindle: SMW Autoblock Linear Position Sensor LPS-X - In-process control: Marposs T25 - Chip conveyor - Coolant chiller: Texa TCW55PMSBXMF000, max. 30 bar input - Coolant filtration with paper belt filter: Micron filter EVO500Pro+KMT150, 550 liters, 80 l/min - Documentation: Digital & hard copy manuals available Machine Status: NOT WORKING - Lifetool motor - Slideways & carriages (X & Z axes) - Hydraulic pressure compensation block