Vertical Turning Machine

EMAG VL 5S oLT

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 00404, turning diameter: 250 mm, Available from: 10.10.2025 – The system consists of two individual units that are linked together. TECHNICAL DETAILS Turning diameter: 250 mm Swing diameter: 260 mm MACHINE DETAILS Power supply: 3-phase AC Frequency: 50/60 Hz Operating voltage: 400 V AC Control voltage: 24 V DC Connected load: 36 kW Gbedpfxsw T Rx Nj Acwsk Rated current: 58 A Main fuse: 80 A NH Total weight: 6,500 kg EQUIPMENT - No driven tools

Condition: used, Year of construction: 2016, Technical details: weight: 22 t Gbedpfx Ajudf Evjcwsk

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 Gbsdpfx Acjqvd Iujwek equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Year of construction: 1995, condition: used, machine/vehicle number: 18891, Force: 10 to. Stroke: 1000mm Godpfxobrcmks Acwebk 3 Broaching-stations With chip-conveyor + platform and safety door

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Gbjdotpu Szopfx Acwjk Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Condition: refurbished (used), Year of construction: 2012, Offered is a vertical turning and grinding center EMAG VSC 250 DS. The machine will be mechanically overhauled and rebuilt by EMAG. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-type conveyor, L-type conveyor, turn around station) and other peripherals such as chip conveyors, coolant systems, etc. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Gbodeh Tkdqjpfx Acwek Workpiece height: 100 mm X-stroke: 860 mm Z-stroke: 200 mm MAIN SPINDLE power 28 kW TOOL CARRIER EMAG wheel turret, 12x VDI 40 console with grinding spindle 18 kW, 45000 1/min Delivery time and additional equipment of the machine on request.

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Gedowzwu Iopfx Acwsbk Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Due to its modular design, the VLC 100 can be configured for a wide range of applications. The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm X-stroke: 605 mm Z-stroke: 530 mm POWER Gbsdpfjh Tm Dusx Acwjk main spindle 18 kW grinding spindle 12 kW TOOL CARRIER 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.

Year of construction: 1992, condition: ready for operation (used), Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025. Gbsdpou D H Hwefx Acwok

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 4,9 [kW] - Spindle speeds : 16.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30.000 [mm/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie Gedpfxoxzu T Se Acwsbk - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] MACHINE HOURS - Number of hours under power : 23.456 [h] - Number of working hours : 16.703 [h] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - CNC option : extanded Memory 500 Mo - CNC option : High accuracy mode BⅡ - Type of divisor : 4e axe CNC intégré * manufacturer : YUKIWA * model : DRC170-EU * travel 4th axis : 360 [°] * indexing precision 4th axis : 0,001 [°] * clamping diameter : 140 [mm] * center height : 135 [mm] * with counter bearing * Coolant tank : 150 [l] * with high-pressure pump : 15 [bars] * With cabin washing - Coolant through spindle - Tool probe - Electric transformer