Used veneer presses for sale (133)

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 80 Connection to central heating system Shelf dimensions: 1300x2500 mm Clearance: 400 mm Hydraulic clamping system Safety switch Hjdpfx Apjzvmkxjdsw Engine power: 2 kW Power supply: 380 V Overall dimensions: Length: 2500 mm Width: 1300 mm Height: 2200 mm

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Very well-maintained and robust OTT heating plate press, type ST 2511/80, with a pressing force of 80 tons. The press is ideally suited for gluing and veneering panels, furniture components, and other wood-based materials. The machine is in very good used condition. Technical data: Manufacturer: Paul OTT Type: ST 2511/80 Year of manufacture: 1987 Machine no.: A 6815 Pressing area: approx. 2,500 × 1,100 mm Pressing force: 80 t Specific pressing pressure: approx. 2.9 kg/cm² Total power: 15.6 kW Rated voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 24 A Heated press plates Temperature display for upper and lower heating plates Pressure and pressing time setting Safety tripwires Condition: very good Equipment: Upper and lower heating plates Hydraulic pressing device Hodjzxzbdjpfx Apdow Adjustable pressing pressure Adjustable pressing time Temperature monitoring Safety tripwires Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2018, Veneer press, OMC Type PL 105 30/13 Year of manufacture: 2018 Dimensions: 3000 x 1300 Piston diameter: 6 x 85 Hedpfx Apezx Sh Ujdow 3.2 kg/cm2 Weight: approx. 3300 kg

Condition: ready for operation (used), plate length 3500mm plate width 1300mm water heating 8 hydraulic pistons pistons diameter 85mm plates span 640mm Hedpfxezxy N To Apdsw outomatic opening year 1992

Condition: like new (used), Shelf length: 3000 mm Hjdpfxezxgx Uo Apdjw Shelf width: 1300 mm 6 hydraulic cylinders Clearance: 410 mm Water heating system Safety shear pin

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser Hodpfx Apjwxdctedjw - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Hsdpfx Aju Egp Ijpdjw Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: refurbished (used), functionality: fully functional, Refurbished, four-piston hydraulic platen press of Italian manufacture. Branded veneer press for easy veneering of wood. Dimensions of veneer sheets: 2500 x 1300 mm Pressure at full area: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic pistons: 4 MYLAR Teflon film on the platens Preparation for heating the platens with water Option to install a hot water boiler Price: 6,630 EUR excluding VAT The condition after refurbishment and the machine's readiness for delivery must be verified in advance! In stock in Telnice near Brno, Czech Republic. Testing, demonstration of the machine, and operator training are standard services. Hsdpfx Apeyi U Rnsdsw

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. Hodpfxjzuzw Do Apdsw The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, Table size: 4000mm x 1500mm Pump working pressure: -0.85 bar Hedpj Af Hm Nefx Apdsw Vacuum pump: Becker Vacuum pump capacity: 40 m³/h Reservoir: 100 l Noise level: less than 70 dB Machine length: 4100 mm Machine width: 1650 mm Machine width when folded: 850 mm Weight: 650 kg

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Hjdpfxoxgpaqo Apdjw Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Product size max. 2500 x 1200mm Oil heating. Total power 21,7 KW at maximum. Hedpfx Apeu E E A Tjdow Very good condition. Available immediately.

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm Hedpozx Aicsfx Apdjw shelf width: 1300 mm integrated, electrically powered water heating system 6 hydraulic cylinders 5 loading cycles safety shear pin CE marking

Condition: excellent (used), functionality: fully functional, shelf length 3000 mm shelf width 1300 mm water heating 6 vertical hydraulic pressing pistons diameter of pistons 70 mm 3 hydraulic thrust pistons for stop movement diameter of pistons 80 mm Hjdpfx Apjzxp R Hedow 6 horizontal hydraulic cylinders loading table 1800x3000 mm unloading table 1500x3000 mm

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 60 mm Shelf dimensions: 1000x2500 mm Clearance: 480 mm Hydraulic clamping system Safety switch Motor power: 1 kW Power supply: 400 V Hodpfszh U N Hjx Apdow Overall dimensions: Length: 2800 mm Width: 1220 mm Height: 1980 mm

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 3,400 mm, total width: 1,650 mm, total height: 2,550 mm, overall weight: 6,000 kg, Equipment: CE marking, ORMA NPC 6/100 Veneer Press Shelf length: 2500 mm Shelf width: 1300 mm Number of loading cycles: 3 Automatic pressure increase Safety cable (“breakaway” cable) Hydraulic press with heating via water from the central heating system Working pressure: 350 bar Hodpoz Nvd Tefx Apdsw Press with 6 cylinders Cylinder diameter: 85 mm CE certified Machine dimensions: 340x165x255 cm (H) Machine weight: 6000 kg

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press 4 cylinders Pressing area 2500 x 1300 mm Electric heating Electric opening and closing Pressing force 90 tons Hedpox Dzvxsfx Apdow Year of manufacture 1994 Price 7,500.-

Condition: excellent (used), functionality: fully functional, shelf length 3000 mm; shelf width 1300 mm; water heating; 6 hydraulic cylinders; piston diameter 70 mm; new Teflon films on the shelves Hedezxp Skopfx Apdjw

Condition: ready for operation (used), Veneer press with 30 floors Hsdoyh A E Uepfx Apdsw Size of press plates 3000 x 1650 mm Hydraulically operated. Hot water for heating In-feed system and out-feed system included

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Connection to central heating (CO) Hsdpfjyz T Ansx Apdow Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing 6 pneumatic side clamps Safety switch Motor power: 1.5 kW Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: excellent (used), functionality: fully functional, Shelf length 3500 mm Shelf width 1300 mm New aluminium shelves 6 hydraulic cylinders Piston diameter 70 mm Water heating Ground clearance 390 mm Safety rupture link Hsdpfxjzyaipj Apdow Year 1999 Weight 4400 kg

Condition: used, Technical specifications: Number of pistons: 2 Piston diameter: 80 mm Connection to central heating system Shelf dimensions: 1000x2500 mm Clearance: 440 mm Hydraulic pressure: ~2kg/cm2 Emergency stop switch Motor power: 2 kW Power supply: 380 V Overall dimensions: Length: 3400 mm Hjdjymyc Dopfx Apdjw Width: 1400 mm Height: 1850 mm

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm clearance between shelves: 30 cm oil heating Hsdpfx Aozx U Haspdow 6 hydraulic cylinders safety shear pin

Condition: excellent (used), functionality: fully functional, Shelf length: 2200 mm Shelf width: 1000 mm 2 hydraulic cylinders Clearance: 510 mm Hedjz D Ewqjpfx Apdsw Cold press, no heating Pump motor power: 1.1 kW

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. Hedpowd N Rmsfx Apdjw (We will only respond to inquiries if you provide your address and telephone number!)