Used Veneer Equipment for sale (41,016)

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Bledpj Afznuefx Aknop Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Like-new, very well-maintained veneer saw with planing unit. Maximum cutting length: 3050 mm. Bljdpfx Ake Ahy H Hjnop Equipped with rear support and finger stop.

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, operating speed: 50 mm/s, table width: 1,300 mm, table length: 4,200 mm, ram plate width: 1,300 mm, ram plate length: 4,200 mm, distance table to ram: 300 mm, total length: 14,090 mm, total width: 2,600 mm, total height: 2,380 mm, overall weight: 13,000 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, The QIULIN BY624×14/20 industrial hydraulic press is designed for pressing and gluing flat components, veneer pressing, and the production of furniture and door elements. It features a single-platen design with two heating plates. The heating is electric, using thermal oil, with separate temperature control for the upper and lower plates. TECHNICAL SPECIFICATIONS – CATALOG DATA: – Brand: QIULIN – Model: BY624×14/20 – Country of origin: China – Type: hot hydraulic press – Pressing force: 2000 kN, 200-ton class – Number of working platens: 1 – Number of heating plates: 2 – Length of working plates: 4200 mm – Width of working plates: 1300 mm – Plate thickness: 52 mm – Maximum press opening: 300 mm – Unit pressure: 3.7 kgf/cm², approximately 0.36 MPa – Working temperature: from ambient temperature to 120°C – Total installed power: 79.35 kW – Plate closing speed: 50 mm/s – Heating: electric with thermal oil – Separate temperature adjustment for both plates – Automatic plate opening – Semi-automatic operation EQUIPMENT VISIBLE IN THE PHOTOS: – Robust frame construction – Hydraulic cylinder assembly – Hydraulic power unit – Separate control panel – Conveyor belt and table for material feeding and removal CATALOG DIMENSIONS OF THE UNIT: – Length: 14,090 mm – Width: 2600 mm – Height: 2380 mm – Weight: approximately 13,000 kg Used machine, as shown in the photos. Paid transport can be arranged. Please contact us for details. JBS Woodworking Machinery WHERE CAN YOU SEE OUR MACHINES? Bedpfxoz Ix Auo Aknelp JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2020, total length: 3,000 mm, total width: 1,300 mm, total height: 1,900 mm, Veneer press Manufacturer: Stema S.r.L. Type: P – 90 C Year of manufacture: 2020 Dimensions (l/w/h): 3,000 x 1,300 x 1,900 Bledpfx Aksz Ip H Rensp Weight: approx. 3,800 kg Pressing force / pressure: 70 – 90 t Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please do not hesitate to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial businesses. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 Bsdoz Nyv Tjpfx Aknolp * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, total length: 40,000 mm, total width: 6,000 mm, Equipment: documentation/manual, Automated nickel–chrome electroplating line for sale in Türkiye. The line was completely refurbished in 2025 and was operational before dismantling. All equipment is now dismantled and ready for loading. Bedpsz Ei Ngofx Aknelp The line has a reported coating surface area of 400–450 dm², a maximum rack load of 1,000 kg and a production capacity of 8,000 dm² per hour. Its installed footprint is 40 × 6 m (240 m²), with reported electricity consumption of 80 kWh per operating hour. The sale includes process tanks, filters, rectifiers, a hot-water boiler, a purified-water system and dosing pumps. The equipment list includes six 1,300 A nickel rectifiers, two 4,500 A chrome rectifiers and one 3,000 A rectifier for electrolytic degreasing. The buyer is responsible for transport and commissioning. A detailed equipment list and presentation are available upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Bedpfxszn N Nnj Aknslp

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 91 82/2, NC Veneer peeler machine. Bledo Aa Amuspfx Aknsp

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Blodpfx Aozimbksknsp Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Year of construction: 2025, condition: new, CAP PRESS: - Manufacturer: Zhenjiang Boye Machinery Equipment Co. - Year of manufacture: 2025 - Model: BYJDJSCX-4 - New machine Bledpfxe Abylks Aknsp - Price: €30,000 DRYER: - Manufacturer: Zhenjiang Boye Machinery Equipment Co. - Year of manufacture: 2024 - Model: YE2-160M-2 - New machine - Price: €10,000 GRINDER: - Manufacturer: Shanghai Wannuo Mechanical & Electrical Co - Year of manufacture: 2025 - Model/Type: YE3-225M-4 - New machine - Price: €30,000 GLUE MIXER: - Manufacturer: Zhenjiang Boye Machinery Equipment Co - Year of manufacture: 2024 - Model: YE3-160M-6 - New machine - Price: €5,000 CAP CUTTING MACHINE: - Manufacturer: Shanghai Wannuo Mechanical & Electrical Co - Year of manufacture: 2017 - Model: YE3-90S-4 - New machine - Price: €8,000

Condition: used, - Cooking chamber dimensions: 1200x2000 mm - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment). Bledpowxmn Sefx Aknjp

Condition: repair required (used), Year of construction: 1969, functionality: limited functionality, machine/vehicle number: 2649, cutting length (max.): 4,200 mm, Equipment: safety light barrier, The machine is largely functional, but the optional “AFTER-CUT” function is impaired. Service and functional adjustments are required. Blodpfs Agw Hzox Aknjp Includes some replacement blades.

Condition: used, Year of construction: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Date of manufacture - 2018. Bledpfx Akeza T Slenep Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: ready for operation (used), Dryer for veneer with 4 levels. In-feed and out-feed system with quality sorting and sorting pockets. Bedpsw Ib A Uefx Aknslp

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. Bjdpfx Aksyhc Rgjnelp It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: good (used), Year of construction: 1980, functionality: fully functional, total length: 2,980 mm, total width: 1,530 mm, total height: 2,100 mm, Equipment: documentation/manual, We are offering this used Joos HP 90 veneer press, manufactured in 1980. Joos HP 90 hydraulic veneer press with electric combination heating plates. For sale is a well-maintained veneer press with the following specifications: - Press area: 2.55m x 1.35m - Height of press chamber: 0.4m - Operating pressure: 355 bar - Overall dimensions: 2.98m x 1.53m x 2.1m - Manufacturer: Joos Bljdpfs Agb Nbsx Aknsp - Model: HP 90 - Year of manufacture: 1980 - Machine type: Veneer press - Press area: 255 x 135 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1990, Ott 2513, Heavy-duty Veneer Press 4 cylinders Pressing area: 2500 x 1300 mm Heating: electric Blsde Ahx Ucepfx Aknop Opening and closing: electric Pressing force: 90 tons Year of manufacture: 1990 Price: 6,500.-

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls Bsdoyalqyopfx Aknjlp 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1980, Höfer H65S heating plate press Disassemblable design Heating power with energy-saving mode: 7.8 kW, normal: 15.6 kW Bedpfx As Ahyycsknjlp Pressing area: 2500 x 1300 mm Operating pressure: max. 65 tons 4 cylinders Space requirement: 2890 x 1460 x 1650 mm Year of manufacture: 1980

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. Bljdpfeymmgijx Aknsp The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Year of construction: 2025, condition: new, functionality: fully functional, VACUFLEX Vacuum Bag – More Possibilities Without Major Investment Would you like to carry out veneer work or form bonding – but without a significant investment in a press? Then this VacuFlex Vacuum Bag is the perfect solution. With this, you can: - easily bond and (shape-) veneer layers - work flexibly and efficiently - accept new orders - economically produce even one-off pieces This means for you: More possibilities in your workshop – without requiring extra space or incurring high fixed costs. Condition: Ready for immediate use Especially interesting for: - Smaller businesses - Getting started with vacuum technology - Supplementing existing equipment Blodpfx As Afxwqsknsp

Condition: used, Year of construction: 2019, Vaupel Air Tower, manufactured by Gram Filter line with fan Type/Model: FL 52 / VE 5500 / W3 Condition: Used Year of manufacture: 2019 Technical data Number of filter cartridges: 4 Bljdpfxozhvvbe Aknop Number of solenoid valves: 4 G102 filter area: 52 m² G105 filter area: 84 m² Compressed air: 30 l/min Dust container: 35 l Weight: 630 kg Dimensions L x W x H: 1400 mm x 1200 mm x 2490 mm

Condition: ready for operation (used), Year of construction: 1990, Langzauner LZT 90 Pressing area: 2500 x 1300 mm Opening width: 400 mm Number of press cylinders: 6 Total pressing force: 90 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.0 kW Space requirement (L x W x H): approx. 3000 x 1500 x 1950 mm Weight: approx. 3800 kg Bjdpfx Ake Ahyvvenolp Hydraulic heating plate press with bottom cylinder design Pressing pressure can be continuously adjusted by means of a pressure control unit Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel at the front Rack-and-pinion compensation for uniform closing Safety pull cord Opening automation Stroke limitation

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with a joining unit and veneer stop table. A video of the machine in operation can be sent upon request. For cutting veneer without splintering and ensuring tight joints, including thick-cut veneer. Cutting length max. 4200 mm. The saw unit and joining unit are combined in a single unit, so only one unit needs to be moved. Easy-to-guide saw unit, runs on ground and hardened shafts. The function of the joining blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with full-length finger stop, adjustable from approx. 2 - 50 cm, with pneumatic clamping. Pneumatic workpiece clamping. Veneer support made of wear-resistant hard plastic. Drive motor 2.2 kW. Fine-tooth blade with carbide inserts, sharpened. Joining blade with PCD inserts, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80 mm. Dust extraction hoses and V-belts renewed. Bjds Ahrgaopfx Aknelp Maintenance unit and compressed air hoses renewed. CE marking. Operating manual. On-board tools. Saw blade and secondary cutting blade freshly sharpened, so ready for immediate use. Partially repainted. Dimensions approx. 5550 x 1200 x 1600 mm (L x W x H). Weight approx. 800 kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this supplier."

Condition: good (used), 1 x Mono doughnut fryer. model FG059-B02 Bsdpfx Akey S Td Honjlp