Used Veneer Press Prints for sale (14,097)

Condition: ready for operation (used), Year of construction: 1996, pressing force: 70 t, Main Drive Pressing force 686 Kn This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information. Application Types Dodsx D D Nnspfx Aa Eocd Pressing / Laminating

Condition: ready for operation (used), Year of construction: 1996, Main Drive Dcjdjx D E Avepfx Aa Eod Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating

Condition: as good as new (ex-display), Year of construction: 2024, pressing area: 3000mm x 1300mm opening: 450mm heating: electrically / thermo-oil max. temperature: 120° plate sourface: stainless steel press opening: automatically - timer / manual emergency stop switch: yes / ripcord pressure: 120t number of cylinder: 6 electriticy: 36A motor power: 21 kW Djdpjhpl U Isfx Aa Escd machine length: 3600 mm machine width: 1800mm weight: 4500kg

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, cylinder diameter: 85 mm, working width: 1,400 mm, number of cylinders: 10, working length: 4,000 mm, TECHNICAL DETAILS Max. working length: 4,000 mm Max. working width: 1,400 mm Number of press cylinders: 10 Cylinder diameter: 85 mm MACHINE DETAILS Heating system: Oil EQUIPMENT System with pre-feed conveyor belt System with outfeed table Safety standard: CE marking Dcjdpfxsyqybhj Aa Esd The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8212

Condition: excellent (used), Xerox Iridesse Including: - OHCF (Oversized High Capacity Feeder) - Finisher for PFIM (without booklet-making functionality) - PFIM (Post Fuser Insertion Module) - EFI Fiery EX-P 6 (DFE – Digital Front End) - 6 Colours (including standard 4 colors: CMYK plus specialty dry inks) - Total counter: 5.5 million (For detailed meter readings, see photos) The Xerox Iridesse Production Press is a high-end digital color press designed for ultra-high-definition printing with specialty dry inks. Key product specifications: Print Speed: 120 pages per minute (ppm) for 8.5" x 11" or A4 paper size. Paper Weight Range: Supports media from 52 to 400 gsm (grams per square meter). Resolution: Ultra HD, with RIP resolution at 1200 x 1200 dpi, 10-bit; print resolution at 2400 x 2400 dpi, 1-bit. Monthly Duty Cycle: Up to 2,250,000 impressions per month. Average monthly image volume (AMIV): 225,000–475,000 impressions. Color Capability: 6-color print engine, standard CMYK plus up to two specialty dry inks (gold, silver, clear, or white). Dimensions: Approx. 4,135 mm (W) x 1,835 mm (H) x 1,114 mm (D) / 163" x 72" x 44". Toner: Uses High Definition EA (Emulsion Aggregation) toner. Dedpeydkcpjfx Aa Escd This press is ideal for premium commercial print jobs requiring metallic or clear effects in addition to traditional CMYK colors, making it a versatile solution for creative and high-impact prints.

Condition: good (used), Year of construction: 2002, functionality: fully functional, ROLAND 906-6 LVV - Year 2002 6 colors + conventional varnish + UV varnish Total impression count approx. 340 million Dedpfx Ajyn Immea Eocd Sheet-fed offset press - Printing units: 6 + 1 conventional varnish unit / UV varnish (dryer 3+3) Including hybrid rollers High-pile and extended delivery Technical features: Speed: 13,000 sheets/hour Max. paper size: 1020 x 1420 mm Min. paper size: 600 x 850 mm Thickness: 0.2–1 mm RCI - ink control system APL Dampening solution refrigeration unit IR hot air dryer Inking unit temperature control device Varnish preparation system OXY-Drey de-dusting system Eltosch drying (IR hot air drying system in the extended delivery - hybrid) 3x conventional IR dryers 3x UV dryers in extended delivery Non-stop operation Temperature control Varnishing unit: Interdeck doctor blade system

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, product width (max.): 250 mm, working width: 247 mm, number of drawers: 4, roll width: 250 mm, roll diameter: 600 mm, inner diameter: 76 mm, EDALE ALPHA 250 year 2007 web width 250mm 4 - color 4 - IR dyer's 2 - die stations 4-anilox 4 soctor blades web camera Djdpfx Aaeyrzy Ue Ejcd slitting web guide 2 sets of print cylinders 2 magnetic cylinder condition very good

Condition: used, Year of construction: 1978, Max. pressing length: 2500 mm, max. pressing width: 1250 mm, total pressing force: 80 t, specific pressing pressure: 2.5 kg/cm², press opening height: 400 mm, heating plate material: gold-anodized, operation: push-button control, swivel switch: yes, number of ram cylinders: 4 pcs., safety treadle strip: yes, weight approx.: 3500 kg, dimensions: 2900 x 1420 x 1920 mm, total connected load: 17.5 kW. Location: Nattheim Djdoyffrbjpfx Aa Eecd

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, working width: 1,400 mm, FLEXO PRINTER SCHIAVI ARIES 6 COLORS Dcsdpfx Aaoyrnmuj Eod Geared central drum flexo printer 6 colors Materials that can be printed plastic films and paper Max. printing width 1400 mm Print repeat min/max 320/1080 mm Automatic turret rewinder Drying unit by gas Equipped with sleeves and aniloxes Year 1995

Condition: excellent (used), Year of construction: 2007, Heidelberg Speedmaster SM 102-2-P Dodpoyrnkmofx Aa Ejcd Year: 2007 Colors: 2 Perfecting: 1+1 / 2+0 Max format: 74 × 102 cm CP2000 Center with ink zone control Alcolor dampening system Manual plate change Technotrans CombiStar Preset Plus Feeder Automatic ink roller washing Automatic blanket washing Air-cooled machine WashStar Preset Plus Delivery High pile delivery Delivery intercom system Eltex anti-static device Grafix Duo Plus XL CAN powder sprayer CleanStar X-Rite

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Dcedpjw R Enmjfx Aa Eod Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Dsdsuf Sy Aopfx Aa Eecd Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, functionality: fully functional, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, 2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication. B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL. Any type of inspection is of course allowed. We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears. The rubber rollers are vitrified and need to be replaced. Dodpfov Nv Tasx Aa Escd The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion. Some specs, for all specs open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing surface 350 x 510 mm Rubber cloth size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening rollers in this case of film dampening is 1 (62mm) Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm Inlay stack height maximum 850 mm Explanation stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Power consumption in total 7kW Primary fuse in any case 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Dcjdpfx Aev Nwgnsa Eod Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: used, total width: 1,300 mm, total length: 2,800 mm, total height: 2,000 mm, overall weight: 3,000 kg, pressing force: 70 t, opening width: 300 mm, cylinder diameter: 70 mm, No. 04524 Veneer press Italpresse MEC 4S Dcjdpfxoyninro Aa Eod Used Gold anodized heating plates in very good condition Plate dimensions 2200 x 1100 mm LW Heating plates electrically heated Pressing process electro-hydraulic Total pressure 70 tons 4 hydraulic cylinders each 70 mm diameter Hydraulic cylinders and pistons are made of a special steel and chrome-plated Opening width 300 mm Emergency stop safety rip cord all around The press table is guided in parallel by means of 2 racks Button control for closing / opening Electromagnetic 2-stage hydraulic pump Transport dimensions approx. 2800 x 1300 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Equipped with Busse aluminum energy-saving plates (The spots visible in the photos are purely optical; the plates are in perfect condition) Total pressing force: 80 t Dodpfex Enp Rox Aa Escd Press cylinders: 4 x 90 mm Opening stroke: 400 mm Weight approx. 3,100 kg Overall length: 2,610 mm Overall width: 1,240 mm Overall height: 1,890 mm Motor power connection: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Weight approx. 3.1 t Availability: short notice Location: Röllbach

Condition: used, functionality: fully functional, Offset printing press 52/72 with perfecting device Dcsdpfx Aaeyapxbo Eed

Condition: excellent (used), Year of construction: 1999, KBA COMET Year: 1999 Dodpfsyq N Ecjx Aa Eecd Newspaper page (broadsheet): 420 × 578 mm Magazine page (tabloid): 289 × 420 mm Newspaper page layout format: 395 × 553 mm Max speed: 30,000 cylinder rev./h Cut-off length: 578 mm Cylinder circumference: 1,156 mm Paper web width (standard): 840 mm / 420 mm Maximum web width: 840 mm Minimum web width: 685 mm Paper web speed: 9.63 m/s 6 printing units Output: 64 pages per cycle technotrans ink tank conveyors stacker Gammerler KL513/1 4x Amal AR60

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Dedpfx Aaoyf E Tfo Eocd Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: used, Year of construction: 2013, General technical data: Machine type: Flexographic printing press Web width: 530 mm Number of colors: 10 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • Turning bar • Delam/Relam unit – 1 color • Cold foil unit – 1 • Die-cut station – 1 • Master gap unit – 1 • Rewind shaft – 1 • 10 UV GEW lamps • 3 sets of sleeves • 10 anilox rollers Djdpfx Aajyplyas Ejcd • 3 magnetic cylinders

Condition: used, Year of construction: 1996, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 2 Equipment & Configuration: • Unwinder Ø1000 mm • Rewinder Ø1000 mm • 2 UV lamps Dcsdpfx Ajyplxija Eod • 2 die-cut stations • Delivery: reel or sheet with folding table

Condition: ready for operation (used), working length 3300 mm working height 1800 mm Dsdpfsypcxtex Aa Escd 3 vertical cylinders 2 horizontal cylinders manual operating mode

Condition: excellent (used), Year of construction: 2005, Our Polly Prestige 674+L machine for sale! Dcodpoypardjfx Aa Ejd Features: Year of manufacture: 2005 6 printing units and one varnishing unit Max paper size: 520 x 740 mm (B2) Number of impressions: 55 million Alcohol dampening Technotrans system High delivery and non-stop feeder Graficontrol (register, ink zone, dampening) Autoplate Washer (ink rollers) Grafix IR dryer Powder spray system Techkon densito connected to the control panel CIP 4 system Supplied with plate punch and bender The machine has not been in production for a year; according to my tests, the rubber rollers are in 60% condition. The cylinders are undamaged. Testing is possible; however, there is no longer staff or auxiliary materials for printing, so only a paper-feed test is available. The machine is located in Hungary.

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 8 Dcsdpjyn Sclefx Aa Eod Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations • Double-shaft rewinder

Condition: used, Year of construction: 2003, General technical data: Machine type: Flexographic printing press Web width: 330 mm Number of colors: 6 Djdpfoyn Scfex Aa Escd Equipment & Configuration: • Turning bar • 2 die-cut stations • 2-shaft rewinder • 6 UV IVT lamps • Video camera system • 3 sets of cylinders • 6 anilox rollers • 3 magnetic cylinders