Used turning automatic lathes for sale (181)

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. Bedeunr H Aspfx Aknelp The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: new, Year of construction: 2023, operating hours: 10 h, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke Z1 [mm]: 50mm /160mm Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 2.2 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 70 C-axis with 0.001° Stroke Z2 [mm]: 215 Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Quantity: 4 driven ER16 modular drilling/milling spindles - Power: [kW]: 1.1 (S6000) - Front drilling unit for 5 drilling quills diameter 25 mm Cross slide counter spindle - Quantity: 2 driven drilling/milling spindles ER16 modular - Power: [kW]: 1.0 (S6000) Back machining 6 driven tools axial ER16 2 driven tools radial ER16 3 turning tool holders 12x12 XD20III 1.0 kW (Fanuc) 1.02 kW (Siemens) TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 5 Number of spindle axes: 2 Rapid traverse speeds m/min: 32m/min (Z1,Z2,Y,X2) ; 24 m/min (X1) Connected load [KVA]: 15 CONTROL Control type: Fanuc 0i-TF Number of axes: 5 (X1, Z1, Y1, X2, Z2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder Interface for JBS ACCESSORIES / INCLUDED Alignment shoes with leveling elements Tool box and service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English (maintenance and operating instructions incl. parameter list and test log) Bedpfjtw Uzvox Aknslp

Condition: new, turning diameter over bed 360 mm turning diameter over slide rest 220 mm turning length 1000 mm turning diameter in the gap 380 mm turning speeds 70 - 2000 U/min centre height 180 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 oder 400 V total power requirement 1,8 kW weight of the machine ca. 0.65 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Blsdpfx Akeupxucenop Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, spindle motor power: 3,700 W, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 20 mm, spindle bore: 25 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10,000 rpm, bar passage: 20 mm, bar diameter (max.): 20 mm, Equipment: rotational speed infinitely variable, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 25 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Travel Z1 [mm]: 205, long turning mode Travel Z1 [mm]: 55, short turning mode Type of collet: 145E Synchronously rotating guide bushing unit Type of guide bushing: T223 TAILSTOCK Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 Maximum turning diameter [mm]: 20 Max. part length, eject forward [mm]: 80, Option 120 C-axis with 0.001° Travel Z2 [mm]: 255 Type of collet: 145E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling unit: - Number: 4 modular, driven drilling/milling spindles (Tools 4 x ER16) - Manual B-axis 3 x ER 16 - Power: [kW]: 2.5 (S6000) - Swiveling range 90° (0° ~ 90°) Cross slide, tailstock - Number: 3 fixed drilling stations ER16 Rear-end machining with Y2 axis, travel 60 mm - Tool carrier for 8 tools - 4 modular, driven drilling/milling spindles ER11 - 4 fixed drilling stations Ø 19.05 mm Bledpfx Ako Ahy Tzjnep AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Connected load [kVA]: 15 CONTROL Control type: Fanuc 32iB Plus Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External operating panel with handwheel 10.4" color monitor LCD/MDI Automatic shutdown function PowerOff Program check function (test run via handwheel possible) Continuous threading cycle Running time display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder Interface for JBS Weight 2.95 tons ACCESSORIES Alignment feet with leveling elements Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liter lubricant volume) Coolant flow monitoring Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating instructions including parameter list and test report)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Blsdex U Af Sjpfx Aknop Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: new, Year of construction: 2023, A machine directly from the Hanwha authorized dealer HB TURNKEY (Hanwha Germany): Hanwha CNC turning center XD10 with Fanuc 0i series control (comparable to Star SR-10J) MAIN SPINDLE - Maximum turning diameter: 10mm - Max. spindle bore diameter: 10mm - Maximum speed [rpm]: 15,000 - Maximum power [kW]: 3.7 BUILT-IN MOTOR - C-axis with 0.001° - Z1 travel [mm]: 155 - Synchronously rotating guide bushing unit - Type of guide bushing: SD125 R - Type of collet: 1212 E TAILSTOCK - Maximum speed [rpm]: 10,000 - Maximum power [kW]: 1.1 - C-axis with 0.001° - Maximum bar diameter [mm]: 10 - Max. part length, push-out in front: - Z2 travel [mm]: 180 - Type of collet: 1212E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 5 external turning tools 8x8mm Cross drilling/milling unit: - Number: 4 driven drilling/milling spindles, ER11 - Power: [kW]: 0.55, S6000 - Front drilling attachment for 4 drill sleeves - ER11 REAR END PROCESSING - Tool carrier for 4 tools - 2 driven drilling/milling spindles ER11 modular - 2 fixed drilling/milling spindles ER11 modular AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse m/min: 32m/min (Z1, Z2, Y, X2); 24m/min (X1) Connected load [kW]: 12KVA CONTROL Control type: Hanwha Fanuc 0iTF series Number of axes: 6 (X1, Z1, Y1, Y2, X2, Z2, X2) Simultaneous 4-axis control External operating panel with handwheel 9.5" color LCD/MDI monitor Automatic power-off function Program verification function (test run possible via handwheel) Blsdpfx Aogq Ravoknsp Continuous thread cutting cycle Runtime display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder ACCESSORIES Leveling feet with leveling elements Part conveyor with collecting tray Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liters lubricant volume) Coolant flow monitoring Coolant tank 140 L Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating manual incl. parameter list and test protocol) - READY FOR IMMEDIATE USE - We will gladly calculate and optimize the cycle time for you and set up your newly acquired machine in our facility. WE FIND A SOLUTION - Whether standard or HB-modified.