Used turning automatic lathes for sale (252)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M216/0316, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, clamping diameter: 16 mm, counter spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Motor power: 3.7 kW Speed range: 10,000 rpm Indexing: 0.001° full C-axis Max. drilling diameter, frontal machining: 10 mm Max. thread size, frontal machining: M8 / M6 Sub Spindle Max. clamping diameter: 16 mm Workpiece length: 125 mm Max. drilling diameter: 8 mm Max. thread size, rear side: M6 Speed range: 250 – 6,000 rpm Gang Tool Holder (upper) Max. drilling diameter: 4.8 mm Max. thread size: M4 Speed: 200 – 8,000 rpm Turret, driven tools: Max. drilling diameter: 4.8 mm Max. thread size: M5 Speed: 200 – 6,500 / 8,000 rpm Driven Tools, rear side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: 8,000 rpm Tools Tool stations: 21 Gang slide: 8 positions Turret: 10 positions Rear side tools: 3 positions Tool Holders Turning tool shank: 10 × 10 mm Drill sleeve diameter: 19.05 mm Rapid Traverse Gsdpjxxll Tofx Ag Dsca Rapid traverse X/Y/Z: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power consumption (nominal): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor belt Parts catcher Fire extinguishing system

Condition: good (used), Year of construction: 2000, functionality: fully functional, Controller Fanuc 18i-T Gcodpsxvbbfefx Ag Dsa NC controlled axes 6 Original Japan With barfeeder FMB mini turbo 2-16 / 3200 A For 3 m bars Max. turning dia 16 mm Max. drilling capacity 7 mm Max. tapping capacity M6 Rapid feed in X/Y/Z/ZB = 20/20/20 m/min Rapid feed in A = 78,5 m/min Feedrate in X/Y/Z/ZB = 10/10/10 m/min Feedrate A = 10 m/min Main spindle speed 500 - 12000 rpm Main spindle power 100/40% ED/Power 2,2 kW Outer tool places 6 Driven tool places 3 Rear side operation Max. turning dia D16 mm Max. part length 85 mm Sub spindle speed 500 - 8000 rpm Sub spindle power 0,55 kW Max. drilling capacity 4 mm Max. tapping capacity M3 Weight 1700 kgs Dimensions LxWxH = 2163 x 770 x 1650 mm Features, accessories - FMB Mini Turbo barfeeder 3 meter - C axis on both spindles - Low volt lamp - Hydraulic unit - Coolant unit (run with oil) - Central lubrication - Door interlock - Ready part conveyor The lathe was removed from production recently. Good condition.

Condition: not inspected (used), Year of construction: 2021, functionality: unexamined, Star SR-32J sliding head CNC lathes - 4 available - see descriptions below Star SR-32J sliding head CNC lathe Serial no: 3174 (09/2015) with Fanuc Series 32i-Model B control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet GP20-2000 high pressure coolant system Serial no: 698 (07/2016) FMB Turbo 3-36/4200/A bar feed Serial no: 48-260915 / R:686664 (2008) Star SR-32J II type B sliding head CNC lathe Serial no: 0700 (12/2020) with Fanuc Series 32i-Model B CNC control, Filtermist extraction Hydrajet UB20-2000-6TF high pressure coolant system Serial no: 1461 (2021) FMB Turbo 3-36/4200/A bar feed Serial no: 61-264515 / R:1824023 (2021) Star SR-32J II type A sliding head CNC lathe Serial no: 0714 (02/2021) with Fanuc Series 32i-Model B CNC control, Filtermist extraction, swarf conveyor and chip hopper Gedpfxewxb Adj Ag Deca Hydrajet UB20-2000-5F high pressure coolant system Serial no: 1490 (04/2021) FMB Turbo 3-36/4200/A bar feed Serial no: 61-264572 / R:1843360 (2021)

Condition: used, Year of construction: 2006, bar material dia. 20 mm spindle passage 22 mm turning length 205 mm Control Siemens Yaskawa turning speeds 500-10.000 U/min c-axis 0,001 ° Gcodpsxukr Dsfx Ag Dsa gripping station 20 mm turning length 30 mm positive location each 0,001 ° Number of tools 10 fest / fix St. total power requirement 2,2/3,7 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 +FMB m CNC sliding head lathe Star Ecas 20, built in 2006, with FMB minmag 18 loading magazine, in good condition, from the medical technology sector. Two machines of the same type and year of manufacture are available.

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Gcedpfexmurrjx Ag Dsa

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, Gcjdpsmu Rtuefx Ag Dja chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 39 mm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Maximum machining diameter: 32 mm Maximum machining length per clamping: 320 mm Main spindle speed: 8,000 rpm Spindle bore: 39 mm Sub spindle (rear-side spindle): 32 mm Max. frontal milling/drilling: 12 mm Max. frontal thread cutting: M12 Tool capacity: 30 tools Number of axes: 7 MACHINE DETAILS Control: Mitsubishi Meldas Connected load: 10 kW Dimensions & Weight Gcjdpfx Agexxlkpe Doa Dimensions (L x W): 2,800 mm × 1,240 mm Machine weight: 2,800–2,900 kg EQUIPMENT High-pressure coolant system Fire suppression system Chip conveyor Parts catcher Parts conveyor belt 4 driven tool holders Standard tool holders

Condition: like new (used), Year of construction: 2021, operating hours: 3,400 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle motor power: 5,500 W, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, Manurhin KMX 920 Clever – 9 axes Year: 2021 – Serial No. 40S003 Machine Specifications - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle power: 3.7/5.5 kW - C-axis indexing accuracy: 0.001° SUB-SPINDLE - Maximum bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle power: 3.7 / 5.5 kW Gsdpfxexwp Txj Ag Doca - C-axis indexing accuracy: 0.001° - Number of turrets: 1 LOWER TURRET - Number of stations: 12 - X/Z travel: 90x65 mm - Y travel: 50 mm - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 10 - Number of driven positions: 4 - X/Y travel: 90 / 319 mm END WORKING DEVICE - Number of stations: 12 - X/Z travel: 215x305 mm ELECTRICAL SUPPLY - Supply voltage: 400 V DIMENSIONS - Floor dimensions: 2000x1280 mm - Machine height: 1720 mm - Machine weight: 3600 kg MACHINE HOURS - Power-on hours: 32,700 h (increasing) - Machining hours: 3,370 h (increasing) Equipment - CNC: Fanuc 31i-B - Interface(s): Ethernet / RS232 / USB / PCMCIA - Chip conveyor - 3-color status light - Rotary cannon - Parts catcher - Parts ejector - Coolant tank ACCESSORIES INCLUDED IN THE SALE - Bar feeder: Iemca Elite 220 (2010) - Fire suppression system - 70 bar high pressure – Muller - Oil cooling unit DOCUMENTATION - Electrical diagram - Maintenance instructions - Operator’s manual Machine currently in use. Viewing under power possible. Available within 2 months. Machine to be collected on site; travel and transport costs borne by the buyer.

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm Godpfxsm E I D Ho Ag Djca boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA installation and training not included. ( price depend on loacation and on request)

Condition: used, Year of construction: 2008, turning length: 300 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, turning diameter: 32 mm, Machine in production. Equipped with: Gcodpjxwmidsfx Ag Dja - Knoll high pressure pumps up to 60 bars - Collant cooling device - swarf coveyour - FMB bar feeder - live tools - 2x C axis We can load machine on your truck free of charge.

Condition: ready for operation (used), Year of construction: 1993, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Godoxtfx Aspfx Ag Dsca Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. 3-axis digital readout: 2 scales are mounted, the scale on the top slide has been replaced but still needs to be mounted. The display unit is for lathes and therefore, with the appropriate setting, adds the slide travel to the top slide travel. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously Gcjdpfxovivx Nj Ag Dja B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: ready for operation (used), Year of construction: 2018, Max. clamping diameter: 20mm, max. workpiece length: 205mm (GB type), 45mm (NGB type), sub-spindle diameter: 20mm, sub-spindle bore: 21mm, max. sub-spindle speed: 9000/min, main spindle motor power: 2.2kW (continuous)/3.7kW (10min / 25% DC), sub-spindle motor power: 0.55kW (continuous)/1.1kW (15min / 40% DC), driven tool capacity: max. 6000/min, tool motor power: 1kW (continuous)/1.2kW (5min / 30% DC), control: Fanuc 0i-TD, connected load: 3.74kVA, noise level: 74dB(A), length: 2070mm, width: 1177mm, height: 1760mm, weight: 1700kg. With bar feeder for bars max. 3200mm and automatic bar loading magazine for bar diameter: 2-20mm. An on-site inspection is possible. Gsdpfxjw U T Tro Ag Deca

Condition: new, Year of construction: 2021, operating hours: 1 h, functionality: fully functional, spindle motor power: 5,500 W, turning length: 210 mm, spindle speed (min.): 6,500 rpm, turning diameter: 38 mm, overall weight: 3,600 kg, total length: 210 mm, input voltage: 400 V, power of the servo motor: 2,200 W, NEW, NEVER USED, ZERO TIME MACHINE! The machine now under power, ready to use with LNS Alpha 552 Bar feeder and Siemens 828D controller The machine is NEW, never used but ready to test, under electrical power. Included is the original chip conveyor, chip container, transformator and LNS bar loading magazine. 7 axis, 5 driving tools, etc... Trasport and installation are FREE inside the EU! We will deliver the machine to your site, fully operational! You only need to provide the space, air and electrical connections, and a crane to lift the machine! Payment in installments is also possible. NEUE, UNBENUTZTE, LAUFZEITFREIE MASCHINE! Gcsdpexvqqcjfx Ag Doa Die Maschine ist betriebsbereit und mit dem LNS Alpha 552 Stangenvorschubgerät und der Siemens 828D Steuerung ausgestattet. Sie ist neu, unbenutzt und kann sofort getestet werden. Der originale Späneförderer und das LNS Stangenmagazin sind im Lieferumfang enthalten. Transport und Installation innerhalb der EU sind kostenlos! Wir liefern die voll funktionsfähige Maschine direkt zu Ihnen! Sie benötigen lediglich Platz, Druckluft- und Stromanschlüsse sowie einen Kran zum Anheben der Maschine. Ratenzahlung ist möglich.

Condition: used, Year of construction: 2007, Maier ML20E Swiss-type lathe, year of manufacture 2007 Gcedpfew D Sqcsx Ag Dja Includes high-pressure unit and bar feeder, oil mist extraction system, and fire extinguishing system Fanuc control Operating hours: 43,093 The machine is fully operational.

Condition: like new (used), Injector Model: BI 204 C Gjdpfxjxruins Ag Djca Manufacturer: Inject star Stainless steel Power: 9kW Voltage: 3 x 400V/ 50Hz

Condition: excellent (used), Year of construction: 2012, ONLY 8,300 spindle hours! Control: TX 8 i-p MAIN SPINDLE Max. bar capacity: 32 mm Max. workpiece length - Swiss-type operation: 245 mm - Short turning operation: 125 mm Max. spindle speed: 6,400 rpm C-axis SUB SPINDLE Max. bar capacity: 32 mm Max. clamping depth of workpiece: 250 mm Max. spindle speed: 6,000 rpm C-axis Gcedpfxexrf Ete Ag Doa UPPER TOOL TURRET Number of stations: 10 All driven Max. speed: 12,000 rpm LOWER TOOL TURRET Number of stations: 9 All driven Max. speed: 12,000 rpm BACK WORKING UNIT Number of stations: 8 Driven stations: 3 (T12, 13 and 14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist filter Bar loader FMB turbo 3-36

Condition: used, Year of construction: 2001, Technical details: bar material dia.: 20 mm turning length: 205 mm Gsdpfxevivyas Ag Deca turning speeds: 10.000 / 8.000 U/min number of tools: 19 driven tools: ja / yes control: FANUC 18i-T CNC sliding headstock machine, subspindle,7 axes (X/Z/Y/C1/X1/Z1(C2), Rod Ø max. 20 mm, Turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle with collet chuck, max. speed 8,000 rpm, C-axis, Tool holder for a total of 19 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt, Standard guide bushing unit Loading magazine FMB turbo 3-26/3200 / A /, year 2001 Coolant used in the machine: oil. Extinguishing system Kraft & Bauer estimated hours: 50.000h "machine on" and 30.000h "spindle on" *

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: MGL203279932, turning diameter: 32 mm, Equipment: bar feeder, documentation/manual, The machine has only been operated in single-shift use! Gcodpexrcpvsfx Ag Dea TECHNICAL DETAILS Max. machining diameter: 32 mm Spindles Main spindle: with collet chuck Sub spindle: with collet chuck and air blast device MACHINE DETAILS Operating hours: estimated approx. 25,000 - 30,000 h EQUIPMENT Bar feeder FMB Turbo 5-42/3200C Documentation High-pressure coolant pump Workpiece removal unit Various collets Central lubrication system Ejector for workpieces with through-hole

Condition: good (used), Year of construction: 2016, The machine can be inspected at our premises in Immendingen after consultation. Included is the original chip conveyor and a bar feeder from FMB 2-20 turbo Gsdpfx Agsu Rmy Re Doca Incl. Kraft and Bauer fire extinguishing system

Condition: excellent (used), Year of construction: 2007, turning diameter over bed 32 mm spindle passage 32 mm turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 spindle turning speed range 7000 U/min workpiece length - max. 150 mm clamping diameter 32 mm feed 0 - 2000 mm/min weight of the machine ca. 5,7 t Gcsdpfx Ajxq Hk Uog Dsa dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 40636/0141, spindle motor power: 15,000 W, turning length: 100 mm, spindle speed (max.): 4,988 rpm, spindle speed (min.): 373 rpm, turning diameter: 25 mm, overall weight: 8,100 kg, rotational speed (max.): 4,988 rpm, rotational speed (min.): 373 rpm, type of input current: three-phase, total width: 1,142 mm, total length: 6,500 mm, total height: 2,270 mm, bar diameter (max.): 25 mm, input voltage: 400 V, thread cutting capacity: M 20, clamping diameter: 25 mm, mount diameter: 25 mm, color: grey, coolant pump power: 1,500 W, coolant tank capacity: 700 l, oil tank capacity: 80 l, motor model: INDUKTA Sf160I-4, number of tool turrets: 12, Equipment: bar feeder, centralized greasing system, chip conveyor, documentation/manual, emergency stop, lighting, type plate available, For sale we offer: 1. Gildemeister AS-25 multi-spindle automatic lathes (4 units) 2. 1A-240-6 automatics (4 units) 3. 1A-225-6 multi-spindle automatics (2 units) 4. SECO/WARWICK VRNe-60.100-650-5-ZF nitriding and oxidation furnace (2014). All machines are operational and available for inspection in Krosno (Podkarpackie region). The Gildemeister automatics have been overhauled by FAT PONAR Wrocław. Tooling, machine tools and other equipment are also available. Godoxu Atyjpfx Ag Dsca

Condition: good (used), Year of construction: 2001, movable headstock 10 axes Spindle speed 8,000 rpm C-axis TOOL CARRIER (X1-Y1 / X2-Y2) - 2 independent cross slides with 2x5 tools - Drive unit 8,000 rpm for up to 4 driven tools on X2-Y2 Godpfxsw Exk Sj Ag Doca FRONT UNIT (X3-Z3) - Cross slide with 4 positions SUB-SPINDLE (X4-Y4-Z4) - Speed 6,000 rpm - Slide with 3 independent axes SUB OPERATIONS - Holder with 7 positions (4 end and 3 cross) Workpiece feeder Coolant pump 20 bar KNOLL chip conveyor Bar feeder ROBOBAR 532, 3m bars

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min Gcedpfxjvivygj Ag Dja number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *

Condition: like new (used), Year of construction: 2004, functionality: fully functional, Citizen M32V - Baujahr : 2004 Anbei mal paar Maschinendaten der M32-M332V - Durchlass für Stangen: 32mm - 10 Werkzeugplätze auf Revolver mit Y-Achse für Stirn- und Rückseitenbearbeitung - ⁠5 Kammwerkzeugplätze - ⁠3 Werkzeugplätze auf Bohrblock f.Rückseitenbearb. - ⁠4 angetriebene Werkzeuge für Quer - C-Achse Hauptspindel - Fräsinterpolation - schneidenradiuskompensation - ⁠synchron gewindebohren - ⁠ER16 Aufnahmen Februar 2022 – Kugelrollspindel X2 Achse getauscht und Lager gewechselt August 2022 – Regler X2 Achse getauscht September 2023 – Messsystem / Regler Ti-Achse getauscht März 2025 – Messsystem Ti-Achse getauscht Gedpfx Agjxfr T Rj Djca