Cnc automatic lathe for sale
Your location was not identified (Edit)
Manufacturer CITIZEN
Type E 32
Year of manufacture 1999
Machine weight approx. 4800kg
Control Mitsubishi
Driven tools yes
Y-axis yes
7 axes
Option long parts with ejection to the rear
Transmission software
Additional pump IKZ
Fit8t08j0
JBS guide bushing
Main and pick-up spindle
Backside processing more
Bar capacity 65 mm
turning diameter 280 mm
EQUIPMENT and ACCESSORIES
oriented spindle stop with 2.5 degree indexing
12 station turret with 6 stations
Psvzoiyj
Cooling by the tools
Chip conveyor
Rod guide SAMECA with 5 guide tubes
Stem adapter
3 fixed stations for backworking more
Mupem ( ex. Traub Spain ) - CNC AUTOMATIC LATHE
SWIFT & ECONOMIC & EASY
Unbeatable for mass production !
MaschTech - We offer service & support & advice in Germany and Europe!
More information, as technical data ( PDF ) is written down below.
You can watch all videos relating to our machines on our YouTube channel under "MaschTech".
Ih7aop8yy
SPECIFICATIONS
- Bar Passage with DIN 6343 collet (mm):
Ø30 Ø42 Ø60 (65) Ø80
- Main spindle motor: Asynchronous vectorial: 7,5-11 kW 11-15 k... more
CNC automatic lathe, mfrd. 1996, control Index C 200-4, with driven tools, spindle alignment and indexing device, division 2.5 degrees above dividing plate.
Swing diameter 540 mm
turning length 820 mm
Stations in the revolver 16
Powered tools 8
Hollow chuck diam. 65 mm
Speeds from 20-4000 rpm.
weight approx. 8 t
Bvelzrlj
Accessories: Chip conveyor, hollow chuck SMW FMF 315-86, tailstock, large number of jaws, large number of tool holders. more
Catalog No. : 4793
Type: Multideco 26/6
Producer: TORNOS
Made in: 2001
Characteristic:
Control system: FANUC 16i
Total hours: 69290 h
Maximum power of the main spindle: 18 kW
Maximum spindle speed: 5000 1/min
Number of synchronous axles: 13 pcs
Maximum-turning length: 120 mm
Max. bar diameter: 26 mm
Length of the lathe: 3500 cm
Width of the lathe: 1950 mm
Dsjivcuxy
Height: 1600 mm
Weight: 8500 kg
Equipment:
Chip conveyor
Bar feeder EMT SUPER 80 (1500 mm)
Machine cooling
Filtratio... more
CNC automatic lathe
Brand: Grape
Type: TNM 28
Machine number: 193
Year of birth: 1996
Control: TX 8 H
Operating voltage: 400 V
Control voltage: 24 V
Total output: 17 KW
Rated current: 35 A
Bar capacity 28 mm
Work spindle 63 - 6300 rpm
Parting slide x 2 axis
Turret slide 8 stations
Number: 5 axes.
Speeds 300 - 6000 rpm
Rapid traverse speed
15/30 m/min
Dimensions: 6500 X 1600 X 2000 mm
Zx3fbhm
Weight: 3500 kilo
With bar feeder, coolant pump and Knoll chip conveyor more
CNC automatic lathe
Herstller: DMG
Type: Sprint 20-5
Year of construction: 2016
Control: Fanuc Series 32 i
spindle passage: 20 mm
turning length: 60 mm
spindle speed: 10.000 min/-1
Rod passage 20 mm
C axis: 0.1 °
Counter spindle speed: 10.000 min/-1
bar passage: 20 mm
C axis: 0.1 °
Blz8x0c2wm
X-path 1: 325 / 2: 220 mm
Y-path 1: 325 / - mm
Z-way 1: 60 / 2: 170 mm
Rapid traverse ( all axes ): 32 m/min
Machine weight approx.: 2.3 t
Space requirement approx.: 2.5 x 2.0 x 2.0 m more
Manufacturing origin Switzerland
Netweight 3000 kg
Dimensions 215x155x215 cm
Custom position 8458.11 20
TECHNICAL DATA
Headstock (axis Z1) (+C optional)
Max bar capacity dia. 20 mm
Max workpiece length according to guide bush type 200 mm
Rotation speed of the programmable spindle 0-12000 rpm
Positioned stopping and indexing increment 0,1 degree
Max spindle power 3,7 (5,5) kW
Guide-bush holder (X1/Y1) (X2/Y2)
Number of tools on the guide bush (2 slides ; 2 x 2 axis) 2 x 5
Cross section of too... more
Mupem ( ex. Traub Spain ) - CNC MULTISLIDE AUTOMATIC LATHE
SWIFT & ECONOMIC & EASY
Unbeatable for mass production !
MaschTech - We offer service & support & advice in Germany and Europe!
More information, as technical data ( PDF ) is written down below.
You can watch all videos relating to our machines on our YouTube channel under "MaschTech".
Magna & MagnaMax 16 / 26 / 36 :
for the production of turned parts up to Ø 16 mm – max 36 mm passage material.
OPTIONAL ATTACHMENTS
- Rotati... more
CNC FANUC
2 SPINDLE
STROKE 300mm
Etcbruv
2 TOOL GANG
4 STATIONS FOR TURNING
2 STATIONS FOR MILLING
3 STATIONS FOR FRONT DRILLING
3 STATIONS FOR BACK DRILLING
THE MACHINE IS IN GOOD CONDITION
BARFEEDER IEMCA GENIUS MUST BE SERVICED more
cnc-automatic lathe
brand: TRAUB
type: TNM28
new in: 1995
equipped with: TRAUB TX8-H control
4x crossing slides
8 hole turret
subspindle
driven tools
back working
thread milling and poligon turning attachement
Hd7t00ljk
chip conveyor
bar feeder TRAUB more
Stock number : Z100000264
Brand : DMG MORI
Model : SPRINT 20-8
Year of Production : 2016
Control : FANUC 32-ı
Axis Movement : x1 50 MM /y1 325 MM/x2 220 MM/y2 85 MM/z2 170 MM
Spindle Speed : 10.000 MIN / -1
Number of toolpositions : 15
MAIN SPINDLE : 10.000 MIN / -1
BAR CAPACiTY : 20 MM
Z1 AXIS LIMIT : 60 MM
SLIDE 1 : X1 /Y1
X1 AXIS LIMIT : 50 MM
Y1 AXIS LIMIT : 325 MM
FIXED TOOL HOLDER : 6 ADET SABİT TAKIM 12/12 MM
DRIVE TOOL HOLDER : 4 ADET TAHRİKLİ TAKIM /ESX 16 TUTUCU
SLIDE 2 : X2/Z2/Y2
X2 A... more
Control Fanuc O-TC, loading magazine FMB Minimag 3 m.
max. turning diameter 12,7 mm
small turning diameter 3 mm
Longitudinal stroke z 1 160 mm
Rapid traverse 30 m/min.
max. thrust 125 daN
Hymnslr
Radial stroke x 1 85 mm
Weight approx. 2.0 t
Tool holder slide 1: fixed tool holder 5 more
Manufacturing origin Switzerland
Netweight 3000 kg
Dimensions 215x155x215 cm
Custom position 8458.11 20
With bar-feeder SSF-532
TECHNICAL DATA
Headstock (axis Z1) (+C optional)
Max bar capacity dia. 20 mm
Max workpiece length according to guide bush type 200 mm
Rotation speed of the programmable spindle 0-12000 rpm
Positioned stopping and indexing increment 0,1 degree
Max spindle power 3,7 (5,5) kW
Blcvyk2ksu
Guide-bush holder (X1/Y1) (X2/Y2)
Number of tools on the guide bush (2 slides ; 2 x... more
1 double-sided CNC sliding headstock automatic lathe
Manufacturer Müga
Type XP4-42SM
Year of manufacture 2008
Serial number 2579,
Control Mitsubishi
Bar feeder manufacturer Müga type BFG-42.3M
Technical details, without guarantee:
x-axis 255 mm
y-axis 365 mm
z-axis 365 mm
z axis travel 470 mm (counter spindle)
Main spindle:
spindle power: 7, 5 kW
bar capacity: 42 mm
turning length: max. 100 mm
turning diameter from bar: max. 42 mm
Max. spindle speed: 4,000 rpm
Tool holder (4 edges) 20 mm x 20 m... more
Max. swing over bed/ slide: 540/ 320mm, max. turning diameter: 280mm, max. rotational speed: 4000/min, quill stroke: 100mm, controls: SIEMENS SINUMERIK 840 C.
Unc930gn more
NOMURA DS NN-38 UB8
with control MITSUBISHI M80 (short term stock Kirchheim / Teck available)
With the following accessories / equipment:
Ptwxvi
-Conveyors - transformer
Parts Abnehmeeinrichtung
-Parts conveyor band
-Teileausstoßer for counter spindle
-Blowing device for spindle
-Automatic central lubrication system
-Status light
-Coolant tank
-Tool breakage monitoring for detour
-Interface for loading magazine key data on the machine:
Maximum turning diameter: 38 mm maximum turning length: 260... more
Stock number : Z10000084
Brand : DMG MORI
Model : SPRINT 20-5
Y9s7oux9
Year of Production : 2015
Control : MITSUBISHI M70
Axis Movement : X 1:325/2: 220 MM / Y 1: 325 / Z 1: 60/2: 170 MM / C 0,1 °
Spindle Speed : 10.000 MIN / -1
Number of toolpositions : 15 more
year 1999/2000, control Fanuc O-TC, loading magazine FMB Minimag 3 m.
max. turning diameter 12,7 mm
small turning diameter 3 mm
max. speed 12000 rpm.
longitudinal stroke z 1 160 mm
Rapid traverse 30 m/min.
max. thrust 125 daN
N2klp
Radial stroke x 1 85 mm
Weight approx. 2.0 t
Tool holder slide 1: fixed tool holder 5
Accessories: Coolant device. more
Manufacturing origin Switzerland
Netweight 3000 kg
Dimensions 215x155x215 cm
Custom position 8458.11 20
with bar-feeder FMB Turbo 5-42
TECHNICAL DATA
Headstock (axis Z1) (+C optional)
Max bar capacity dia. 20 mm
Max workpiece length according to guide bush type 200 mm
Rotation speed of the programmable spindle 0-12000 rpm
Positioned stopping and indexing increment 0,1 degree
Max spindle power 3,7 (5,5) kW
Guide-bush holder (X1/Y1) (X2/Y2)
Number of tools on the guide bush (2 slides ; 2 x 2 ... more
Manufacturing year 2006
Manufacturing origin Swiss
Machine number 7313
Netweight 1500kg + 600kg +bac
Dimensions 155x88x185 + 380x70x140
Custom position 8458.1110
spindle max 15'000min-1 - 5 axes
Fanuc 32i,
Feeder Mini Boss325A no.1200641N02
Be07ugk90
TECHNICAL DATA
X1 55 mm
X2 16 mm
Y 227 mm
Z1 22 mm
Z4 115 mm
Min. bar capacity 1 mm
Max. bar capacity 8 mm
Max drilling dia. of main spindle 6 mm
Max. drilling dia. counter spindle 6 mm
Max. drilling dia. Of rotary tools (HF unit) 3 mm
Speed range... more
Manufacturing origin JP
Voltage 200V 3ph 50/60Hz
Netweight 950 kg
Custom position 8458.9130
Dimensions 141x56x140 cm
with feeder LNS Tryton-107 no.173000
TECHNICAL DATA (standard)
Number of axes 6
Number of spindles 2
Main spindle
Max bar diameter Ø 7 mm
Max turning length 40 mm
Travel 40 mm
Spindle speed 16000 min-1
Spindle power 1,1 kW
Indexing precision C-axis 0.0001°
Back-spindle
Max bar diameter 7 mm
Spindle speed 10000 min-1
Power 0,5 kW
Indexing precision C-axis 1°
Gang tool... more
Manufacturing origin Switzerland
Netweight 3000 kg
Dimensions 215x155x215 cm
Custom position 8458.11 20
TECHNICAL DATA
Headstock (axis Z1) (+C optional)
Max bar capacity dia. 20 mm
Max workpiece length according to guide bush type 200 mm
Rotation speed of the programmable spindle 0-12000 rpm
Positioned stopping and indexing increment 0,1 degree
Max spindle power 3,7 (5,5) kW
Guide-bush holder (X1/Y1) (X2/Y2)
Number of tools on the guide bush (2 slides ; 2 x 2 axis) 2 x 5
Cross section of too... more
Fanuc 31i, turning bush, pcs catcher, pcs conveyor,
pce ejector, coolant tank, Robobar SBF-532 bar3600mm
Manufacturing origin Japan
Voltage 400V
Netweight 3000 kg
Dimensions 240x138x205 cm
Total power
Custom position 8458.11 20
TECHNICAL DATA
Number of axes 8
Number of spindles 2
Control Fanuc 31i
Main spindle
Max bar diameter 25.4 mm
Travel 230 mm
Speed 10'000 min-1
Power 5.5 kW
C-axis indexing precision 0.1°
Counter-spindle
Max bar diameter 25.4 mm
Spindle speed 10'000 min-1
Power ... more
control Fanuc - feeder LNS Hydrobar
Manufacturing origin Swiss
Voltage 380/50/3
Netweight
Custom position 8458.9130
TECHNICAL DATA :
Machining range :
maximum machining diameter 11(.433')
maximum machining length 120 (4.72')
maximum tapping diameter M6 (Brass) (1/4')
maximum drilling diameter 7 (.27')
Machine capabilities :
main spindle speeds 200-12,000min-1
sub spindle speeds 200~4,000min-1
number of O.D. tools 8
number of I.D. tools 3
tool size 8x8x85
travel ... more
CNC AUTOMATIC LATHE "TORNOS" DECO 2000, CAP. 10 MM
10 axes, with feeder Tornos Robobar SSF-226 no.C14111
12'423 working hours
Manufacturing origin Switzerland
Voltage 400V/50Hz/3ph ; 8 KVA ; 12A
Netweight abt. 1500 kg
Dimensions 1650x1050x1850 mm
Custom position 8458.11 20
TECHNICAL DATA (standard execution)
Headstock (axis Z1) (+C axis optional)
Bar capacity of max bar dia. 10 mm
Max workpiece length according to guide bush type 60/90 mm
Rotation speed of the programmable spindle 0-16000 ... more
7 axes simultaneous, control Fanuc 32i-A
Manufacturing origin Taiwan
Voltage 400/50/3
Netweight 2400 kg
Custom position 8458.11 20
Dimensions 2605 x 1420 x 2150 mm
TECHNICAL DATA :
- max turning dia of main spindle 20 mm
- max turning dia of sub spindle 20 mm
- max turning length (fixed guide bush) 200 mm
- max turning length (rotary guide bush) 85 mm (option : 150 mm)
- max turning length (non guide bush) 45 mm
- max drilling capacity of main spindle 10 mm
- max drilling capacit... more
A25 CNC GLE - CNC Automatic Lathes for the production of turned parts up to max. 25 mm passage material.
MADE in GERMANY ! Unbeatable for mass production !
Spindle power– 2.1kW ; Spindle Speed- 1500/9000 U/min ; Max. spindle capacity - 25 Ø ; Hexagon – 22mm ; Square - 18mm / Production rate – 2100 Pc ; Distance max. between collet and spindeltailstock – 240mm
Blfislsuyq
Dimensions without Bar Feeder - 1100 x 470 x 1420
Exceptionally low work costs, short production quantity - simultaneo... more
CNC lathe WEILER 160 CNC
SIEMENS 810 T path control
Bjnr7ekfk3
Year of construction: 1985
SeNr .: 081 more
TD36 CNC 2A - CNC Automatic Lathes for the production of turned parts up to max. 36 mm passage material.
MADE in GERMANY ! Unbeatable for mass production !
Control – FAGOR; Spindle power– 5.5 kW / Spindle Speed- 4000 U/min / Max. spindle capacity - 36 Ø / Hexagon – 31mm / Square - 25mm / Production rate – 28-1880 Stück / Distance max. between collet and tailstock – 285mm / Turning length – 70mm / Vertical slides stroke – 35mm / Horizontal slides stroke – 35mm
Dimensions without Bar Feede... more
Carbide CNC Wood Lathe Turning Cutters Bits Knife Tools
This CNC wood lathe turning tool is a new design carbide wood lathe cutter, it is used with CNC wood turning lathe machine, such as cnc auto motion, cosen cnc, Intorex, Unique CNC, StyleCNC, Laguna, etc, reduces the tool changing times greatly during one day working. This wood lathe knife eliminates the need for frequent sharpening which is very common in lathe turning woodworking. Improved the productivity, and reduce the production cost... more
ready for operation (used)
2008
ready for operation (used)
Manufacturer Brazil
Condition: limit switch is not working and the battery is low or the memory card is defective, the machine is connected
control system Fanuc
Machine has documentation in German language
The machine includes collet chucks and a set of tool holders
Blkg9xtguc more
Code: ST3230
Swing over bed ..... 870mm
Swing over cross slide..... 500mm
Centre height..... 440mm
Cbeqtunc
Distance between centres..... 4150mm
Spindle bore..... 230mm
Spindle nose..... A2-15
Spindle centre..... MT#6
X axis feed..... 0.1mm/min-3000mm/min
Z axis feed..... 0.1mm/min-3000mm/min
Bed width..... 560mm
Tailstock body movement..... Hydraulic
Tailstock centre..... MT#6
Tailstock quill travel..... 200mm
Tailstock quill diameter..... 165mm quill more
IMMEDIATELY AVAILABLE STORAGE MACHINE
brand-new CNC cycle lathe
Manufacturer STYLE, Type Style350 ( 850 ) with CNC control STYLE
Designed for individual parts and small series
Simple and intuitive operation
Modern and ergonomic design
7 models with turning diameter from 300 - 1200 mm
centre distances between 500 and 5000 mm
Precise double prism guide
Stable cast iron bed with double prism
Full enclosure with CE marking
Optimal accessibility of the working area
Independent and functionally well t... more
1994
ready for operation (used)
Serial No. C20038
Control Fanuc O - T
Turning length 400mm
Max, machining diameter 250mm
Swing over Covers 530mm
Swing over carriage 330mm
Spindle speeds 3500 rpm variable
Bar capacity 65mm
Number of stations on turret 12
Spindle bore 77.5mm
Tail stock 5 morse taper
Z axis working stroke 400mm
X axis working stroke 215mm
Bjbdjxvnrm
Feed rate Rapid traverse X axis 10m/min, Z axis 20m/min
Bed type Slant
Input 415/3/50hz / 15 kW
3 jaw chuck 254mm
Fitted with Suds, parts catcher, Swarf tray
Bar fee... more
AVAILABLE ON REQUEST
brand-new CNC cycle lathe
Manufacturer STYLE, type Style 750 with CNC control STYLE
Service for commissioning etc. from
- Munich / Germany
- Erwitte / Germany
- Netherlands
Developed for individual parts and small series
Simple and intuitive operation
Modern, ergonomic and encapsulated design
Different models with turning diameter from 300 - 1200 mm
centre distances between 500 and 5000 mm
Precise double prism guide
Stable cast iron bed with double prism
Full enclosure wi... more
2001
ready for operation (used)
Manufacturer Czech republic, Kovosvit
Eaquqf
Condition: the power tools and tailstock are not working, the machine is connected more
Centauro BETA CNC 3 Axis Automatic Swing Chisel Mortiser with Router - Milling Head. 2012 CE
Fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloadin... more
Technical data
CNC - lathe plan
Make ZERBST
Type DP 1
Year of construction 1989
Control Siemens 840 6 (2014)
Workspace
Centre distance feed machine without tailstock swing over bed 1,400 mm swing over bed slide 1.200 mm
Main drive
Power at 100% ED 55 kW
Main spindle
Diameter of front bearing 240 mm
Spindle bore 100 mm
Speed range 1 - 450 min-1
Max torque 25,000 nm
Transmission levels can be switched via M-function 4
Gear-unit stage 1 1 - 28 min-1
Gear-unit stage 2 3 - 71 min-1
Gear level 3 9 - 1... more
1995
ready for operation (used)
Serial No. 119272
Control Mazatrol T- Plus
Turning length 1000mm
Turning diameter 575mm
Spindle through hole 88mm
Distance between centres 1018mm
Spindle centre height above bed 310mm
Swing over cross slide 470mm
Spindle speeds 35 - 3000 rpm Variable
A T C 40 Station
Max, Tool Length 300mm
Max, Tool Diameter 90mm or Adjacent pocket empty 120mm
Max, Tool Weight 10kg
Tail stock 5 morse taper
Tailstock travel 900mm
Z axis travel 1065mm
X axis travel 450mm
Rapid traverse speed X Axis 12000mm/min / ... more
2016
ready for operation (used)
Over Front Apron: 508 mm
Over Front Apron: 279 mm
Chuck (optional): 203 mm
Max Cutting Diameter (varies with turret): 406 mm
Max Cutting Length (varies with workholding): 1219 mm
Between Centers: 1219 mm
X Axis: 203 mm
Z Axis: 1219 mm
Rapids on X: 11.4 m/min
Rapids on Z: 11.4 m/min
Max Thrust X: 17321 N
Max Thrust Z: 8661 N
Spindle Nose: A2-5
Drive System: Direct Speed, Belt Drive
Max Rating: 7.5 kW
Max Speed: 1800 rpm
Max Torque: 146 Nm @ 355 rpm
Spindle Bore ø: 58.0 mm
Inline Air Hose: 3/8 in
... more
