Used saws for sale (25)

Condition: used, Year of construction: 2009, operating hours: 550 h, functionality: fully functional, machine/vehicle number: 041, Bridge milling machine for granite and marble, with rotary and tilting table, new steel foundations for bridge and table available Dimensions: 560 cm long, 460 cm wide, 300 cm high Weight approx. 6160 kg, disc motor inverter, work table with motor drive and tilt adjustment, linear shaping system, disc tilt for bevel cuts Head rotatable 0-90 degrees for milling/cutting miters Pedpfezim Dlex Angogu Automatic sawing program and automatic profile program

Year of construction: 1994, condition: used, functionality: unexamined, We are selling a used, traditional bridge saw, type Zambon Rover 35, manufactured and installed in 1994. The machine is in excellent, freshly renovated condition, both mechanically and visually. The bridge consists of solid, heavy-duty cast iron and is mounted on two concrete support walls on sliding rails. The total weight of the machine with table is 5800 kg. Further technical data: saw blade motor 18.5 kW / 380V / 50Hz, two speeds 1460/2930 through belt drive, pivoting support 0-90° for miter cuts, carriage with 300 mm electric height adjustment, blade diameter 350 - max 800 mm, which allows a cutting depth of 18.5 cm, cutting length 3500 mm, bridge travel 4700 mm. The machine is programmed and operated via the pivoting and hydraulically vertically adjustable control panel and the switches installed in it, and via the 2-axis control system EM760.55. Up to 99 cutting widths can be programmed with repetition, a granite lowering automatic can be set, and there is a profile program. However, the machine can also be operated in manual mode without the automatic function. The feed of the carriage and the bridge is done by hydraulic drive, the bridge travel by handwheel with scale. We have all the documents for the machine, from the purchase to the operating instructions, as well as complete records of repairs and accessories, and the complete foundation plans. The machine includes a heavy-duty cast iron table 3500x200 mm, load-bearing up to 5 tons, with tiltable support frames with wooden cladding. The table can be rotated by hand and fixed at 90° and 45°, and can also be hydraulically raised by 500 mm. The problem: 1) The machine has an electrical defect, which means that the carriage cannot be moved at the moment. The cause, which should not be major, must be found by the buyer. 2) The table is anchored to the ground with a cylinder up to about 2 m. This can be lifted out, but it will not stand on its own because of the tall cylinder. It is questionable whether the counterpart in the ground can still be removed. For this reason, and because of the costly effort involved in creating the foundation for the table, we recommend installing a different table. Terms of sale: The stated price is therefore only for the machine and does not include the table, but the table can be taken away free of charge. The machine is still assembled and can be inspected by arrangement, but cannot be demonstrated due to the described defect. The sale is ex works, and the buyer is responsible for organizing the disassembly and transport. Assistance can be provided during disassembly, and a crane is available for disassembly and loading. Podpfx Ane Aarlyogegu

Condition: used, functionality: fully functional, 3-axis waterjet machine, used, in working condition. Pedps Adqi Eefx Angjgu

Year of construction: 2005, condition: used, Breton 5-axis milling machine, complete with camera, conveyor belts, and infeed roller table. Pgjdez I D Atepfx Angou

Year of construction: 2005, operating hours: 900 h, condition: ready for operation (used), functionality: fully functional, GMM Sawing Machine - Lexta 36 (4 axes) Versatile bridge saw for marble, granite, and stone, offering high precision and user-friendly operation. Specifications: - 4 axes - Table: 3540x1850 mm - Blade: 800 mm diameter - Reliable and easy-to-use machine Pgedpfx Ansx A A Nwsgou

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AI/086060718, overall weight: 3,450 kg, total length: 5,500 mm, total width: 2,400 mm, total height: 2,400 mm, operating pressure: 6 bar, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 1,400 rpm, Denver Skema Logic from 2018, in good condition, for automatic and manual operations. New wooden bed has been fitted, cleaned and tested. Front safety photocells can be added on request. Pgjdpfxjzcm Uxj Angju

Year of construction: 2018, operating hours: 3,758 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5156, GMM rotating head bridge saw with vacuum separator Support travel distance: 3600 mm Support height adjustment: 700 mm Extension of bridge rails Y-axis to 5400 mm Maximum blade diameter: 825 mm for cutting depth approx. 300 mm Saw motor power: 23.5 kW Stepless speed control: 800 - 6000 rpm Tilting table with hydraulic tilt: 3500 mm x 2000 mm Table extension: 3500 mm x 430 mm Saw table with rubber table covering Removable table stops Vacuum lifter for automatic separation of workpieces Camera Automatic material measurement Automatic tool measurement Central lubrication Air conditioning GMM software including: Pjdjy Iu Rajpfx Angjgu - Milling - Drilling - Profiles - MiniCad - Cuts from CAD - Parametric shapes

Year of construction: 2013, condition: good (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Special design of the carriage for maximum cutting precision; Pgodpfx Ajzu A N Iongsu Water collection tray with integrated water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Mobile Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Pedpevtdztjfx Angogu

Year of construction: 2009, condition: used, GMM rotating head bridge saw with 5 working axes. Automatic rotating support, 0-90°. Automatic rotating head, 0-370°. Maximum blade diameter: 625 mm. Saw motor power: 23.5 kW. Tilting table with hydraulic tilt: 3500 mm x 2000 mm. Camera. Pedpfx Ajzz Nukongjgu 15″ Touchscreen. Laser.

Year of construction: 1995, condition: used, functionality: fully functional, Compact bridge saw, perfect for cutting stone, marble, and granite. The machine is fully functional. Features: Hydraulic table, very convenient to use Electric head movement Blade: Ø 600 mm Z-axis stroke: 500 mm Pgsdpfx Aex A Dc Ssngeu

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 76020, travel distance X-axis: 3,800 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 320 mm, table width: 2,400 mm, table length: 3,800 mm, Breton Genya is the advanced cnc bridge saw for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen tops, vanity tops or claddings. Pgjdpfx Anszrfadogou The indicated price does not include disassembly and subsequent installation costs.

Year of construction: 1994, condition: used, We offer this used F. Zambon Rover 35 bridge saw, year of construction 1994. Manufacturer: F. Zambon Model: Rover 35 Year of manufacture: 1994 Condition: used Category ID: 431 Type: Bridge saw Pgsdpfx Aneyuuudogju If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 1998, operating hours: 5,400 h, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 1000 mm Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Psdpfx Asym Nzpsngogu Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1.000 / 1.450 U/min. Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Folding bellows cover Bridge and cross guides Machine rotary table Size: 3400 x 1500 x 800 mm Table can be rotated manually through 360°, with fixed locking at 90° intervals, or individually in any position. Side stops can be folded down manually

Condition: used, A Baumunk contour wire saw in need of repair is offered. Drive power: 5.5kW, control: Bosch OSA. The machine has been idle for about one year. Contour sawing was still working well when last used. The mounting for the grinding rollers is defective. Inspection by appointment possible. Pjdpfx Ansz Du Ifsgogu

Condition: reconditioned (used), functionality: fully functional, Electrospindle 13.5 kW, brand CMS, manufacturer codes M0402501 and 7142R Pjdpjyviucofx Angjgu

Condition: refurbished (used), functionality: fully functional, Equipment: CE marking, Fully refurbished, heavy-duty bridge milling machine. GMM, model EURA 35. We offer machine installation services, including training for your operator. Pgsdpszxi Niefx Angju

Year of construction: 2013, condition: excellent (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Special design of the support for maximum cutting precision; Water collection tray with built-in water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Pgjdpfx Ansi Akvvogeu Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Mobile Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, Note: The auction end date has been postponed to September 16, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,700 mm Travel range, Y-axis: 2,100 mm Travel range, Z-axis: 370 mm Rotation range, C-axis: 0–362° Swivel range, A-axis: 0–90° Travel time, C-axis (0–392°): 3 s Travel time, A-axis (0–90°): 2 s Spindle speed, electric spindle: 6,000 rpm Power, electric spindle: 16.5/56 kW Speed, X-axis: 30 m/min Speed, Y-axis: 30 m/min Speed, Z-axis: 5 m/min Pedpfx Anezuyryegogu Dimensions, tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg EQUIPMENT Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade tilt (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Condition: used, lot of debite machines moulders hydraulic shovel 27t and 42t polisher capacity 600mm to 2000mm vertical and horizontal slitter block size 2000 x 1800 3-point shovel etc. approx. 300 tons Pgsdpfx Asncfpbongeu negotiation on site always in French, English by appointment or by e-mail translator

Condition: new, functionality: fully functional, overall weight: 52,000 kg, total length: 10,400 mm, total width: 6,800 mm, workpiece length (max.): 3,700 mm, workpiece height (max.): 2,200 mm, Breton Paragon is the multi diamond wire machine for sawing marble or granite blocks, cutting slabs in slight thickness Pgedpfexdh Rcjx Angsu Multi diamond wire machine to cut 20 or 30 mm thick slabs. The structural robustness combined with the characteristic triangle system makes it possible to saw marble and granite blocks to make slabs of various thicknesses. Price from €uro 500.000

Condition: new, Year of construction: 2021, functionality: fully functional, total height: 5,400 mm, total length: 8,300 mm, total width: 2,300 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, Machine for squaring blocks and cutting slabs and thick slabs, featuring a heavy-duty, arc-welded steel structure, which is heat treated to ensure the required stiffness of the system and a top cutting precision. Extremely user-friendly, the machine is provided with a control console with touch-screen housed in the electric cabinet and a mobile button panel to actuate the main working axes. The machine needs to be adapted for different voltages and frequency. Pgsdotwww Hopfx Angeu The machine is not available for North America.

Year of construction: 2026, condition: new, Universal miter saw; vertical adjustment 1,100 mm; rotating table +/- 180°; saw stroke 900 mm; saw blade diameter 500 mm. Psdpfx Anod A Huwjgjgu

Year of construction: 2023, operating hours: 0 h, condition: new, BCZ600 is suitable for sawing your stones/concrete. Product information: Pjdpfx Aoncffvsngjgu - Voltage: 380 V (16 A) - Engine Power: 3 kW - Engine Rotation: 1500 rpm - Frequency: 50 Hz - Table Size: 480mm x 380mm - Working height: Ergonomic height of 88 cm - Dimensions Machine: 1510mm x 750mm x 1530mm - Saw Diameter: 600 mm - Saw Thickness: 4,4 mm - Net weight: 186 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, functionality: fully functional, overall weight: 12,000 kg, total length: 8,100 mm, total width: 6,080 mm, total height: 5,500 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, sheet thickness (max.): 140 mm, table length: 3,650 mm, table width: 2,150 mm, SPECIAL PRICE Pgjdpfx Aetynfgengsu Breton Combi is the cnc bridge saw with waterjet for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen top, vanity tops and claddings Price from €uro 250.000