Used turning automatic lathes for sale (190)

Condition: new, Year of construction: 2023, operating hours: 10 h, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke Z1 [mm]: 50mm /160mm Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 2.2 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 70 C-axis with 0.001° Stroke Z2 [mm]: 215 Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Quantity: 4 driven ER16 modular drilling/milling spindles - Power: [kW]: 1.1 (S6000) - Front drilling unit for 5 drilling quills diameter 25 mm Cross slide counter spindle - Quantity: 2 driven drilling/milling spindles ER16 modular - Power: [kW]: 1.0 (S6000) Back machining 6 driven tools axial ER16 2 driven tools radial ER16 3 turning tool holders 12x12 XD20III 1.0 kW (Fanuc) 1.02 kW (Siemens) TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 5 Number of spindle axes: 2 Rapid traverse speeds m/min: 32m/min (Z1,Z2,Y,X2) ; 24 m/min (X1) Connected load [KVA]: 15 CONTROL Control type: Fanuc 0i-TF Number of axes: 5 (X1, Z1, Y1, X2, Z2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder Interface for JBS ACCESSORIES / INCLUDED Alignment shoes with leveling elements Tool box and service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English (maintenance and operating instructions incl. parameter list and test log) Dusdpfxjtw Uzvs Aahjw

Condition: new, Year of construction: 2025, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, 1 multispindle TORNOS SAS16-DC in rebuilding - new electrical cabinet SIEMENS or FANUC, to choose – pick-up with brake – adjustable stop with counter operation – 3 independent feeding system – several tool-holders and drillings – drum bar with support Duedpfx Aajugl S Iohew – Options :automatic bar loader IEMCA PRA, numerical tapping, CNC cross slides, etc... Contact us.

Condition: excellent (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, Equipment: documentation/manual, EQUIPMENT: FANUC 31i control system Back-end machining Synchronous spindle Powered tools C-axis Part conveyor Duedpfx Aozcdbijahjw Oil mist extraction system Fire extinguishing system Bar feeder magazine FMB TURBO 3-36

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA weight of the machine ca.: 1,7 t Duodpfx Aovivygjahsw dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *

Condition: used, Year of construction: 2017, operating hours: 21,752 h, functionality: fully functional, turning length: 100 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, turning diameter: 42 mm, overall weight: 3,000 kg, Max. work length: 100 mm Max. machining diameter of bar work SP1: 42 mm Max. machining diameter of bar work SP2: 34 mm Turret slide stroke X1 axis: 140 mm Z1 axis: 235 mm Z2 axis: 310 mm Number of spindles: 2 Spindle speed range SP1: 60-6,000 rpm Dujdpfx Asx Ig Iksahow Spindle speed range SP2: 50-5,000 rpm Tool spindle speed range: 50-5,000 rpm Number of driven tools: max. 8 Spindle drive SP1: 11/7.5 kW Spindle drive SP2: 5.5/3.7 kW Power supply capacity: 28 kVA Fuse: 81A Bar feeder: SN542-3.2 m Quick tech Year of manufacture: 2017 Serial no.: 1438

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,749,535 h, functionality: fully functional, machine/vehicle number: 6060449, turning length: 305 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 32 mm, overall weight: 8,000 kg, rotational speed (max.): 8,000 rpm, type of input current: three-phase, bar passage: 32 mm, total length: 3,671 mm, total height: 2,650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, bar diameter (max.): 32 mm, collet bore: 32 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, input voltage: 400 V, power: 36 kW (48.95 HP), travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 305 mm, clamping diameter: 32 mm, controller manufacturer: Traub System TX 8i - s V7, Equipment: documentation/manual, The machine is operational and currently in production. All information can be found in the attachment. The machine is available for immediate delivery. The order confirmation with all information about the machine and the loading magazine is included in the attachment. Dujdpfx Aozc Hmuoahsw New price: €444,857.70 (gross) The machine was originally used as a demonstration model from 2016 to 2020. Please note the operating hours. The machine will be sold including the FMB LSK38 loading magazine. FMB LSK38 / 3200 "C"

Condition: good (used), Year of construction: 2011, functionality: fully functional, Siemens control system, Turret, Y-axis, Dsdpfxjzakq Ss Aahsuw Counter spindle, High-pressure system, FMB loading magazine.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Siemens control system, Turret, Djdpfxozairhs Aahouw Counter spindle, Loading magazine.

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 7,000 rpm, bar passage: 32 mm, feed length Z-axis: 320 mm, bar diameter (max.): 32 mm, power: 7 kW (9.52 HP), travel distance Z-axis: 320 mm, For sale: Hanwha STL32-HY CNC lathe (9-axis live tooling, max. diameter 32mm) Siemens 840D control cabinet Year 2011, machine was retrofitted in 2018 Chip conveyor Numerous accessories/tooling included with the machine Dujdpfx Asytfynsahew Available immediately HANWHA/CINCOM/TORNOS/NOMURA/STAR/BIGLIA/TSUGAMI/SWISS-TYPE LATHE/KMX

Condition: ready for operation (used), Year of construction: 2016, spindle motor power: 11,000 W, spindle speed (max.): 8,000 rpm, overall weight: 3,900 kg, total width: 1,390 mm, total height: 1,745 mm, bar diameter (max.): 38 mm, product length (max.): 3,020 mm, number of axes: 8, This 8-axis UTIMAC ISOLA XD 38 II Siemens was manufactured in 2016. It features a maximum bar capacity of Ø38 mm and a spindle speed of 8,000 rpm. The machine includes a counter spindle with a speed of 7,000 rpm and a rapid traverse of 32 m/min. If you are looking to get high-quality turning capabilities, consider the UTIMAC ISOLA XD 38 II Siemens swiss type turning machine we have for sale. Contact us for further details. • Main spindle: • Max. bar capacity: 38 mm (42 mm optional) • Stroke (versions): H = 320 mm; N = 90 mm; NH = 90 / 160 mm • Rapid traverse: 32 m/min • Counter spindle: • Max. bar capacity: 38 mm Duodpfxsy U H Nnj Aahew • Stroke: 280 mm • Speed: 7,000 rpm • Motor power: 11 kW • Vertical tool plate axes X1–Y1: • Turning tools: 5 (16x16) • Standard rotating tools: 5 • Rotating tools for B-axis: 4 • Fixed spindle stations: 5 • Motorized tool power: 2.6 kW • Motorized tool speed: 6,000 rpm • Rapid traverse: 32 m/min • B-axis: • Angular adjustment: 145° (+90° / -55°) • Number of tools: 6 (3 ER16 + 3 ER11) • Motorized tool speed: 6,000 rpm • Motor power: 1.9 kW • HY2 version: • Tool stations: 8 (4 fixed + 4 motorized) • Coolant tank capacity: 230 L Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr230440, Control system, manufactured by CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), Bar Ø max. 16 mm, turning length max. 200 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle Ø max. 16 mm, Counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt Chip conveyor Fire extinguishing system Loading magazine IEMCA Genius 118/3200 Year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! control, make CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), bar-Ø max. 16 mm, turning length max. 200 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, counter spindle Ø max. 16 mm, counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, backworking), parts conveyor belt Chip conveyor Fire extinguishing system loading magazine IEMCA Genius 118/3200 year of construction 2005 The machine can be inspected by appointment. Duodey Ulh Nspfx Aahjw Changes and errors in the technical data and information and subject to prior sale!

Condition: used, Year of construction: 1990, Technical details: Dsdpou Iwyvefx Aahjuw spindle passage: 23 mm z-axis: 150 mm turning length: 150 mm stroke: x+z Achse / Axis/eje/eixo/os = 30 mm facing movement (x-axis): 30 mm longitudinal traverse (z-axis): 30 mm control: Num 760T spindle turning speed - continuous: U/min feed speed: x/y: 5 mm/min feed speed: z: 10 mm/min tool turret: 2 Stück/pcs mit je/each 6 tools operating pressure: max. 45 bar total power requirement: 8,0 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,45x1,3x2,2 m dimensions of the bar loader L-W-H: 4,65x0,5x1,3 m techn. details: - bar clamping hydraulic -automatic workpiece discharge (via catch basket) - 2 turrets with each 6 tool tapers - coolant device - control NUM 760 (size: L:1,0xW0,8mxH:1,56m) Zubehör: - bar loader magazine make IEMCA type CS 112/31 accessories: -24 div. tool tapers - device tool Sylvac system ( size:L:0,58xW:0,5xH:0,43m) *

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Djdpfsvbb U Hsx Aahsuw Machine documentation available .

Condition: used, Year of construction: 2003, Control system: FANUC Number of axes: 7 Complete with IEMCA SMART 316 bar feeder Main spindle: Max. bar diameter: mm 12 (15) Dodezbry Rjpfx Aahjuw Max. speed: 12,000 rpm Drive power (S2: 30 min / S1): kW 3.7 / 2.2 Counter spindle: Max. turning diameter: mm 12 (15) Maximum speed rpm: 12,000 Drive power (S2: 30 min / S1): kW 3.7 / 2.2 Axes: Maximum rapid traverse rate of the axes m/min 40 Maximum axis acceleration m/s2 10 Travel X1 (linear) / Y1 / Z1 mm 30 / 195 / 120 Travel X2 / Y2 / Z2 mm 180 / - / 180 Tool slide 1: Tool slide system: linear Number of fixed / driven tools: 5 / 4 Arbor cross-section for fixed tools: mm 10 x 10 Drive power for driven tools (S3 40% / S1): kW 1.1 / 0.55 Tool slide 2: Tool slide system: linear Arbor cross-section for fixed tools: mm ø 16 Drive power for driven tools (S3 40% / S1): kW 1.1 / 0.55 4 driven tools Chip conveyor Machine completely overhauled by the manufacturer in 2012

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,500 rpm, overall weight: 6,000 kg, bar diameter (max.): 42 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, controller manufacturer: MITSUBISHI, controller model: M730UM, number of axes: 10, This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6500 1/min and includes a high-pressure cooling system of 20 bar. The machine is equipped with a bar feeder of 3200 mm length and offers advanced capabilities for precision turning. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 42/10 linear machine we have for sale. Contact us for further details. • Maximum Speed Spindle 1: 6500 1/min • Maximum Speed Spindle 2: 6500 1/min • Max. travel Z-axis 120 mm • Electrical Phases: L1,L2,L3,N,PE • Power Consumption: 57 kVA • Maximum Input Current: 82 A • Main Fuse: 100 A • Short Circuit Rating: 5 kA • Maximum Voltage: 440 V • Operating Voltage: 400 V • Voltage Tolerance: ±10% • Frequency: 50 Hz • AC Voltage: 230 V • DC Voltage: 24 V • Counter Spindle Flushing: Included • Counter Spindle Inner Cooling: Included • Main Spindle Inner Cooling: Included • Radial Driven Drilling and Milling Unit for Revolver: Included • Axial Driven Drilling and Milling Unit for Revolver: Included • Angular Adjustable Driven Drilling and Milling Unit: Included • High Pressure Cooling System: 20 bar Djdpfxoy T Hzus Aaheuw • Bar Feeder: IEMCA BOSS 552 • Bar Feeder Length: 3200 mm Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1998, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Dusdpfjza Txlox Aahew Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Year of construction: 2003, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Dsdpfoza Tumox Aahsuw The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control system, 16 mm spindle bore, Counter spindle, 3 radially mounted driven tools, High-pressure pump, Fire extinguishing system, FMB magazine loader, Numerous accessories. Dujdpfxsyyxqns Aahjw No guarantee for the accessories shown in the photograph.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Fanuc control system, Spindle bore 26 mm, Dujdpfx Aoyyxkzeahsw Counter-spindle, 4 driven tools axially for the counter-spindle, 3 driven tools radially for the main spindle and counter-spindle, FMB tool magazine, Fire extinguishing system, High-pressure pump. No guarantee for the accessories shown in the photograph.

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min Dujdpfx Aovh I Tveahow rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: X12018, overall weight: 2,850 kg, Equipment: documentation/manual, Due to the cessation of production, we are selling a well-maintained Citizen C32 VIII long-bed lathe, manufactured in 2004. Equipment: - 2 spindles - live tooling - 6 programmable axes - 2 C-axes - chip conveyor - Iemca bar feeder (Boss 332 E/R, 2005) - parts conveyor - warning light - fire extinguisher Type: C32 VIII Manufacturing number: MCL2032/0413 Date of manufacture: 2004 Weight: 2850 kg Serial number: X12018 We are also open to discussing the purchase of additional equipment (oil mist extractor, parts centrifuge, compressor, etc.). Dujdpfxjyl St Ss Aahsw If you have any further questions or require more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 5,500 W, spindle speed (max.): 7,000 rpm, overall weight: 2,900 kg, controller manufacturer: FANUC, controller model: 18i-TB, number of axes: 7, This 7-axis TSUGAMI BS32CE-V was manufactured in 2008. It features a maximum turning diameter of 32 mm and a turning length of 250 mm. The machine is equipped with two spindles, offering main spindle speeds of 200 – 7000 rpm and sub-spindle speeds of 200 – 6000 rpm. If you are looking to get high-quality turning capabilities, consider the TSUGAMI BS32CE-V swiss type turning machine we have for sale. Contact us for further details. • Condition: Very good; low number of hours • Power-on hours: 28,538 • Spindle hours: 9,190 • Number of spindles: 2 • Max turning diameter: 32 mm • Max turning length: 250 mm • Max drilling diameter: 12 mm • Max threading diameter: M10 • Sub-spindle speed: 200–6000 rpm • Sub-spindle motor power: 2.2 kW • C-axis: 360,000° • Spindle nose: for F37 collet • Tooling/Stations: • Number of stations: 4 • Number of tools: 20 • Number of live tools: 5 • Turning tools: 5 Dujdpfx Aeyq Nwxjahsw • Drilling tools: 6 • Cross machining tools: 4 • Live tool speed: 200–5000 rpm • Live tool power: 0.9 kW • Working feed: 1–6000 mm/min • Rapid feed: 20 m/min • Dimensions (machine, without bar feeder): 2150 × 1500 × 1800 mm Additional equipment • Bar feeder: IEMCA BOSS 332L • Chip conveyor • Parts catcher • Short part ejector • Bar puller • Work light • Set of collets • Serial port interface RS232 • 3-color status light • Documentation

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Duodpfxezaud As Aahjw Machine without known defects.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,578 h, bar diameter (max.): 8 mm, number of axes: 9, This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information. • Drum with loading magazine • 10+5" HYBRID drum • Integrated hydraulic unit • Support leg rear/front • 1100 mm center height • Filter with 25 liter capacity • Electrical: 380 V, 3-phase, 50/60 Hz motor voltage • Control voltage: 24 V DC • Bar compatibility (for 14 guide tubes): • 1–4 mm diameter bars • 4 mm diameter bars Duodpfx Aaey S Aq Aehsw • 8 mm diameter bars Additional equipment • 1 piece oil basin • 1 chip collecting basinOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. 2 similar machines available! Additional information Dedpfxsy S Aqij Aahjuw • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments