Used travelling column milling machines for sale (121)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3460 1030 9, type of input current: three-phase, We are offering this used Soraluce TRO-1250 radial drilling machine. The machine is fully operational and has seen only limited daily use. Bjdpfx Asymybtjdrsli If you have any questions or require further information, please contact us by message or phone. The buyer is responsible for transportation and relocation. The machine is located in Lahti. Test operation is possible.

Condition: used, Year of construction: 2000, x-travel 6000 mm Bsdjxmaqyepfx Adrjli y-travel 1600 mm z-travel 1300 mm control FIDIA C20 /4H-SB tool taper SK50 spindle turning speed range 22 - 4000 U/min SHW – UFZ5 Year of manufacture: 2000 Specifications X-axis 6000 mm Y-axis 1600 mm (stroke with vertical head rotated 1900 mm) Z-axis 1300 mm Orthogonal head 2 axes, indexed 1° Automatically swivelling milling head holder (rear) 360x1 degree Automatically swivelling milling head holder (front) 180x1 degree Control: Fidia - C20 / 4H-SB SK 50 - DIN 69871 Infinitely variable feed range; X-axis: 2–12,000 mm/min. Y-axis: 2–18,000 mm/min. Z-axis: 2–18,000 mm/min. Rapid traverse; X-axis: 12,000 mm/min. Y-axis: 18,000 mm/min. Z-axis: 18,000 mm/min. Spindle/auto. Milling head: Speed 22 - 4,000 rpm Torque max. 1180 Nm Total current load: approx. 50 kVA/80 A. Without clamping plate Without chip conveyor

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Bjdpfxsxwdyge Adroli Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: Bedpfx Adevn N Hdjrjli >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder Bodpfxeh Sptno Adreli - etc.

Condition: new, 2TR19H C3 FP KOYO TAPERED ROLLER BEARINGS NEW Dementions: 482.60 x 615.95 x 184,15 mm Weight 150 kg WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: NP342204-90WA2 TIMKEN x14 units 22324 EDK FAG x2 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 F36204 FAG x3 Blsdpfeqpgc Nex Adrsi STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 0112, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 9,000 rpm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Travel distances Travel X: 1,500 mm Travel Y: 3,500 mm Travel Z: 1,000 mm Worktable dimensions: 4,500 x 1,600 mm Spindle and Tooling Max. spindle speed: 9,000 rpm Swivel range of angular head (B-axis): ±90° Tool holder: SK 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 5,000 x 3,700 mm Weight: 32,000 kg Blsdow Hrh Hjpfx Adroi EQUIPMENT 2 ALMATIC machine vices Various clamping devices for the machine Technical documentation

Condition: ready for operation (used), Year of construction: 2004, operating hours: 8,087 h, functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 5,000 rpm, table height: 925 mm, The machine has undergone a complete inspection, with the milling head and the telescopic cover of the X-axis repaired. Additionally, the control panel and the polycarbonate doors have been renewed, and the machine has been thoroughly cleaned. TECHNICAL DETAILS Travel distances X-axis: 5,300 mm Y-axis: 1,500 mm Z-axis: 2,000 mm A-axis: +45° to −225° B-axis: +165° to −18° Spindle data Spindle speed range: 60 – 5,000 rpm Tool holder: SK 50 DIN 69871 Spindle outer diameter (front bearing): 140 mm Spindle bore: 90 mm Table dimensions Clamping area: 6,000 × 1,200 mm Table height: 925 mm Feed rate: 10 – 6,000 mm/min Rapid traverse (X & Y): 15,000 mm/min Rapid traverse (Z): 10,000 mm/min MACHINE DETAILS Control system Manufacturer: HEIDENHAIN Model: TNC 530 Operating hours Bljdjxbd A Nspfx Adrsi Spindle hours: 8,087 h Control system on-time: 3,785 h Machine on-time: 30,238 h Note: The machine has already been dismantled.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Travelling column machine Completely overhauled in 2025 Work table clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 7 T-slot size to DIN 650 mm 18 Travels X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top – spindle nose min/max mm 150 / 850 Main spindle drive for speed 8000 rpm Tool holder SK 40 AC motor, frequency controlled kW 26 at 44% duty cycle Speed range: rpm 15 – 8000 Torque Nm 245 Internal coolant supply (IKZ) Chip conveyor with belt filter Feed drives X-axis AC servo motor kW 3.5 Bjdsw I Tm Sspfx Adrsli Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect measuring system Accuracy Positioning accuracy X, Y axis over 1000 mm: mm ± 0.0150 Repeatability X, Y axis: mm ± 0.0075 Positioning accuracy Z axis: mm ± 0.0150 Repeatability Z axis: mm ± 0.0075 Tool magazine 24 positions mounted on the left side of the machine - Tool stations 24 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control: Heidenhain iTNC530

Condition: used, Year of construction: 2002, Technical details: x-travel: 16300 mm y-travel: 2600 mm z-travel: 1600 mm spindle taper ISO: 50 spindle turning speed range: 22 - 4000 U/min rapid traverse: 24 / 36 m/min main drive: 37 kW total power requirement: 50 kW Bedpfxsv Uzt Ao Adrjli with CNC HEIDENHAIN TNC 430 automatic Universal Milling Head automatic toolchanger 90-pockets coolant attchament and chip conveyor *

Condition: used, Year of construction: 1976, Machine type: Universal milling machine Manufacturer: SHW Model: UF21 Year of manufacture: 1976 Control type: NC Country of origin: Germany X-axis travel: 1050 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Spindle taper ISO: SK40 Spindle head swivel right-left: 90° Quill travel: 180 mm Spindle speed range: 36–1800 rpm / 18 steps Feed rate X+Z: 0.3–1800 mm/min Feed rate Y: 0.3–900 mm/min Rapid traverse X/Z: 1800 mm/min / Y: 900 mm/min Table size: 1200 x 550 mm Total power requirement: approx. 10 kW Estimated weight: 4400 kg Bsdpjxwnm Dsfx Adrjli Machine dimensions (L x W x H): approx. 3.1 x 2.5 x 2.2 m Spindle motor power: 6.8 kW

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam Bjdpfx Aoxpudtsdrsli - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Feed rate: 10 – 2,000 mm/min Blsdpexxwy Aofx Adrei Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, CNC Drilling and Milling Center Donau DANUSYS 2910, Year of manufacture 2002, overhauled Technical Data: Control: Heidenhain iTNC 530 Travel distances (X, Y, Z axis): 2900 / 1000 / 700 mm Milling capacity in St 60: 300 cm³/min Drilling in solid St 60: ø 40 mm Blsdpfxewymtqe Adrsi Tapping: M30 Feed rate (X, Y, Z axis): 7 / 7 / 7 m/min Spindle: HSK 63, 15,000 rpm Coolant: internal (IKZ) and external (AKZ) Tool changer with 32 positions, divided into 2 x 16 slots Overhauled components: - Spindle fully overhauled and rewound by the manufacturer - Spindle controller repaired - Overhaul of Heidenhain power supply unit - Main computer (MC422) and control unit (CC422) checked (Heidenhain) - Carriage and guide rail of the Y-axis replaced Additional accessories: Handwheel HR 410 Chip conveyor with integrated coolant tank Documentation (operating manual, various manuals for installed components, circuit diagram, etc.) Sale ex stock; Subject to prior sale

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, Equipment: documentation/manual, Zayer mobile column milling machine, horizontal stroke 10000, vertical stroke 2500, slide stroke 1250, spindle 1800n, tool magazine 30 positions, year 1994, Heidenhain 415b control with 15" LCD display replaced last year, cone grinding October 2024 (iso50), always serviced. Currently in use. Blsdpfjwhd Alsx Adrei

Condition: like new (used), Year of construction: 2014, Siemens 840 D Swivelling control panel including SIEMENS 840 D Solution Line control system. Travel X axis: 8000 mm Travel Y axis: 1300 mm Travel Z axis: 2200 mm Tool system: SK 50; Capto C8 Main spindle: 20–4000 RPM 3D volume model of the machine HEIDENHAIN measurement system on all axes. Automatic central lubrication with pressure and time monitoring for all axes and moving components. Bljdpfew Syv Usx Adroi Measuring probe system RENISHAW RMP60 M Tool breakage detection via probe BRANKAMP CMS collision monitoring with two measuring channels: Center height, Fibro rotary clamp: 1100 mm Center width, Fibro rotary clamp: 900–3000 mm Max. swing diameter, Fibro rotary clamp: 2200 mm Fibro rotary table D=1600; 250 RPM Carousel rotary table FIBRODYN 1600 mm: Table surface 6000x2000 mm d’Andrea facing slide Universal milling head Automatic tool changer ATC, 80 tool magazine slots in M version: 3 milling head slots High-pressure pump 30 bar Operating hours: 4261 h

Condition: excellent (used), Year of construction: 1999, Moving column milling machine in excellent condition. Blodpfxelfcdqs Adrji Disassembled machine visible at our headquarters.

Year of construction: 2001, operating hours: 27,046 h, condition: excellent (used), functionality: fully functional, CNC traveling column milling machine in cast iron design Extremely stable design thanks to the X-axis with triple guidance and a fixed table. Machine will be delivered EXW. TECHNICAL DETAILS X-axis (longitudinal) linear guide: 5,300 mm (triple guidance) Y-axis (traverse) linear guide: 1,000 mm (double guidance) Z-axis (vertical) flat guide: 1,500 mm (double guidance) Spindle speed range: 60 to 3,000 min-1 Tool holder: SK 50 Tool changer: 40-position Pull stud: DIN 69872-B Drive power: 30 kW Tool dimensions: max. L=350mm / D=200mm Table size: 6000x1000mm Heidenhain control: TNC426 with color screen and handwheel Rapid traverse X, Y, Z axes: 10,000 mm/min Clamping area: 6,000 x 1,000mm Blsdpfx Adjlhqkhersi T-slots: 22 H12 / spacing 130mm Central T-slot: 22 H7 MACHINE DETAILS Operating time: 62,774 hours (as of 11/2022) External coolant pump: 1.1 kW with 50 l/min Machine weight: 43,000 kg EQUIPMENT - Electric handwheel Heidenhain - Swivel machining function monitored with light barriers - New X-axis covers - Chip conveyor, 2-stage - New milling head bearings, 2021 - Operating manual / documentation CONDITION - Service and maintenance have been performed according to schedule - Geometry is in good condition - Suitable for swivel machining Machine available from July-August

Condition: good (used), Year of construction: 1994, KEKEISEN Universal moving column milling machine UFF 6000/15, YOP 1994, machine-no. F37642, Blodpfx Adenuda Aorji well maintained, good condition 2-axis automatic universal milling head with autom. positioning in 1°-positions tool holder SK50 according to DIN 69871/872 form B Longitudinal travel of the column (X-axis) 6000 mm Vertical travel of the headstock (Z-axis) 1500 mm Transverse travel of the headstock (Y-axis) 1200 mm Table size 6200 x 840 mm, table load 8000 kg Table surface with T-slots 22 mm, spacing 140 mm Spindle speed 20 - 2000 rpm (infinitely variable in 2 ranges) Axis speeds 4 m/min or 10 m/min (rapid traverse) CNC control Heidenhain TNC 415 with electr. handwheel HR130 Complete 2nd user interface on the operator's platform that travels with the machine 3D touch probe m&h radio-controlled Tool changer 40 places max. Ø 250 mm, max. 400 mm long Coolant unit (also IKZ, max. 10bar) with 800 l tank + drum filter cladding of the machine table, with chip conveyor between bed and table without fixators, without installation and commissioning Connection data 400 V; 50 Hz; approx. 57 kVA Price: on request, plus VAT Pricing: ex works, delivery time: short term by agreement

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes Bedpfx Ajxup Iqjdroli 36 tool stations SK40 Pendulum operation with partition wall 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA A-drive RTA 200/300

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, TECHNICAL DETAILS Travel distances Longitudinal travel: 3,500 mm Cross slide travel: 1,100 mm Vertical travel: 1,500 mm Table Blsdpfx Ajx Aph Hedrei Table dimensions: 3,800 x 1,000 mm Spindle Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool changer Positions: 40 CNC control Model: SELCA S 4045 PDH MACHINE DETAILS Unfortunately, no specific information regarding connected load, dimensions, or weight of the machine is provided in the supplied text. EQUIPMENT No additional equipment information has been provided.