Used Anayak Cnc for sale (45)

Condition: used, Year of construction: 2007, operating hours: 39,215 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 4,000 rpm, controller model: Fanuc 18i-MB, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,100 mm Table dimensions: 2,700 × 850 mm Table load capacity: 6,000 kg Spindle connection: ISO 50 – DIN 69871 AD Spindle power: 22/26 kW Spindle speed: 60–4,000 rpm Gear stages: 2 Working feed rate: 20 m/min Rapid traverse rate: 10 m/min Axes: A- and B-axes Division: 2.5° MACHINE DETAILS CNC control: Fanuc 18i-MB Njdpfozmw I Ajx Amyewi Coolant pressure through the spindle: 23 bar Machine weight: 16 t Operating hours: 39,215 h EQUIPMENT Automatic 2-axis swiveling head for the A- and B-axes Two-stage spindle gearbox Coolant supply through the spindle at 23 bar Note: The functionality of the spindle cooling system was not tested prior to the auction. A surcharge of €500 will be applied for the necessary equipment if container loading is required.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 3,000 rpm, workpiece weight (max.): 5,000 kg, TECHNICAL DETAILS Travel in X-axis: 2,000 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 1,100 mm Maximum workpiece weight: 5,000 kg Nwsdozmfn Dspfx Amysi Clamping area (L x W): 2200 x 850 mm Number of T-slots: 5 Width of T-slots: 22 mm T-slot spacing: 150 mm Feed rate in X/Y/Z axis: 10,000 mm/min Rapid traverse rate in X/Y/Z axis: 20,000 mm/min Spindle speed: 60 - 3,000 rpm Swivel range of the milling head: -180°/+177.5° Positioning of the milling head angle: Automatic in the A+B planes Positioning accuracy: ±0.014 mm Repeatability: ±0.008 mm Ball screw diameter in X/Y/Z axis: 63 mm Ball screw pitch in X/Y/Z axis: 16/10/10 mm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Motor power: 38 kW Power of the hydraulic unit: 1.8 kW Operating pressure of the hydraulic unit: 110 bar Capacity of the hydraulic unit tank: 100 l Delivery rate of the hydraulic pump: 9 l/min Power of the cooling unit: 1.36 kW Air pressure: 6–7 bar Air flow rate: 50–225 l/min Power supply: 400 V; 50 Hz Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,000 x 2,900 mm Total weight: 14,000 kg EQUIPMENT Two-stage spindle speed control

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-426 Njdeugbrqspfx Amyewi Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5300 mmVertical traverse Y: 1050 mmTransversal traverse Z: 1500 mmVertical capacity (VC): 80 - 1130 Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X,Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: UndeterminedMachine weight approximate: 43000 kgMachine dimensions approximate: 11560 x 6150 x 3538 mm Accessories Guarding: 2 front sliding doorsAutomatic tool changer: ATC40Chip conveyor: 2 longitudinals hinge typeElectronic handwheel: HR-410Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 2008, machine/vehicle number: 220028, CNC control: HEIDENHAIN iTNC 530, travel ranges: X-axis 4300 mm, Y-axis 1500 mm, Z-axis 1300 mm, table size 4970 mm x 1200 mm, max. table load 15,000 kg/m, tool holder ISO 50, multi-angle milling head 45°, automatic angular positioning of axes B and A, spindle motor power 22 kW, hydraulic rotary lock, working feed rate 10,000 mm/min, rapid traverse rate 20,000 mm/min, with coolant system, total spindle operating hours: 25,496 hours. Nwsdpfx Amezn A U Rjyoi

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis Nwedpfx Ajxcgtgsmysi - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 3,000 rpm, controller model: HEIDENHAIN iTNC530, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range X-axis: 2,700 mm Travel range Y-axis: 1,000 mm Travel range Z-axis: 1,050 mm Max. feed rate X/Y/Z: 10,000 mm/min Table dimensions: 3,300 x 1,000 mm T-slots: 7 x 22 2-axis diagonal milling head: 1 x 2.5 Spindle speed: 60 - 3,000 rpm Motor power: 22/30 kW Tool holder: ISO 50 (DIN69872-B) MACHINE DETAILS Control system: HEIDENHAIN iTNC530 Coolant pressure through the spindle: 19 bar EQUIPMENT Adjustable control panel in front of the machine Nwodpfx Aozg Dq Dsmyoi Enclosure with front-facing doors Machine documentation Cooling and chip disposal Chain conveyor in the longitudinal direction

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Nsdpfx Asrx Rtrsmyowi Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: used, Year of construction: 1998, Technical details: x-travel: 2500 mm Nodpfxozc I Ndo Amyjwi y-travel: 935 mm z-travel: 1000 mm table surface area: I 1615 x 800 mm table surface area: II 800 x 800 mm spindle taper ISO: 50 milling head speed: 60 - 3000 U/min feed speeds: 1 - 3000 mm/min rapid speed: 10 m/min total power requirement: 45 kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: 5 x 5 x 4 m with CNC HEIDENHAIN TNC 426 Universa Milling Head -C-axis automatic Horiz-Vertical - Intermediate angles manual table II 800 x 800 mm as B-axis ( rotary table ) coolant attachment and chip conveyor *

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm milling spindle motor: 35/30 kW Nsdpfov Rdzbox Amyowi spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories *

Condition: good (used), Year of construction: 2004, Ref. -No.: 10634 Manufacturer: ANAYAK Type: P 3200 Year of construction: 2004 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 1400 mm Z-Travel: 750 mm Table-Size (Lxw): 3200 x 1400 mm spindle running time: 23.291 H Control: 83.301 H Nwodpszc D Euefx Amyji machine: 73.907 H Program run: 27.807 H

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Nwjdpfx Amozc D Enoyji Head and turntable: 1600 x 1450 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Njdpoyry Rfjfx Amyewi Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Revised in 2022 Axes X-axis travel mm: 2.000 Y-axis travel mm: 1.000 Z-axis travel mm: 1.100 C-axis degrees: 0.001º (cont) Worktable Table dimensions mm: 1.250x1.400 Maximum weight on table kg: 5.000 Spindle Njdorxfnijpfx Amyjwi Spindle speed rpm: 60 - 5.000 Automatic Spindle (Axes A/B): 2. 5º/2. 5º Tool system Tool holder: ISO-50 DIN 69871A Tool magazine slots: 60

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Axes X-axis travel mm: 3.000 Y-axis travel mm: 1.700 Z-axis travel mm: 1.500 Feed rates m/min: 10 Rapid traverse m/min: X, Y: 20; Z: 10 Worktable Table dimensions mm: 3.200x1.200 Maximum weight on table kg: 8.000 T-Slots: 7xT22 - 150 mm Spindle Spindle speed rpm: 30 - 5.000 Spindle drive power kW: 28/38 Gear box steps: 2 Cooling Cooling through the Spindle Center bar: 22 Nwedpforw Arzsx Amysi Tool system Tool holder: ISO-50 DIN 69871A Equipment Electronic Handwheel Chip conveyor 4th axis ready

Condition: used, Year of construction: 1994, functionality: limited functionality, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, table width: 700 mm, table length: 1,800 mm, Anayak VH 1800 bed milling machine with 4th axis Nwjdpfeypxtasx Amyoi Control system: Heidenhain TNC 415 B 4th axis as a rotary table, table diameter approx. 530 mm Tool holder: SK 50 Machine is operational, further condition unknown Machine is still connected to power Overhead crane available for loading

Condition: excellent (used), Year of construction: 2018, overall weight: 320 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, CNC Bed-Type Milling Machine Correa Anayak - HVM BIRA Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Length:1200mm Njdezcpg Djpfx Amyewi Width:800mm Height:700mm Weight:320kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, overall weight: 10,000 kg, total length: 5,000 mm, total width: 900 mm, total height: 900 mm, Box table Correa Anayak MACH-ID 9393 Make: Correa Anayak Year: 2001 Cast iron contsruction 2 matching units availebel clean surface Nwodjzcn E Sspfx Amyei Number of T slots: 7 Jump from T to T: 130mm T size: 22mm Number of T-slotted sides:1 Length: 5000mm Width: 900mm Height: 900mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, X axis (longitudinal) 800 mm Nwodpfxow Tyyie Amyoi Y axis (transversal) 400 mm Z axis (vertical) 300 mm Table length 1340 mm Table width 300 mm Max. spindle speed 2500 rpm Spindle motor power 3 kW Dimensions (L x W x H) 1800.0 × 2000.0 × 2080.0 mm Weight 2050 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, Anayak FBZ-HV-2500 Nwedpfx Ajy Tqb Eomyoi Year of manufacture: 1998 Machine no.: M-980610 Control system: Heidenhain TNC 426 X/Y/Z: 2500/900/975

Condition: good (used), Year of construction: 1999, functionality: fully functional, Anayak VH plus-2000 Nedpfxey Tqbxe Amyjwi Year of manufacture: 1999 Machine no.: M-991103 Control system: Heidenhain TNC426CB Net weight: 24 tons X/Y/Z: 2000/1300/1460

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,500 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, coolant supply: 15 bar, spindle motor power: 33,000 W, controller manufacturer: HEIDENHAIN, controller model: 430 CA, power: 0.033 kW (0.04 HP), Equipment: rotational speed infinitely variable, ANAYAK HVM 9000 – CNC moving column milling machine | 8300 mm x travel | Fully overhauled High-capacity CNC bed milling machine with moving column, reconditioned in workshop. Perfect for heavy-duty machining of large components with precision and reliability. 🛠 Key technical specifications: • X-axis travel: 8300 mm • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle power: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Tool changer: 30 positions • Automatic axes: B and C • CNC Control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min Njdpoqpd D Ijfx Amyowi 🔧 Full retrofit includes: • Regrinding and geometry adjustment of Y and column guides • Complete head overhaul: new bearings, seals, gears • Full electrical cabinet update under CE compliance • New telescopic covers, drag chains, and motor wiring • Machine tested and delivered with full documentation ✅ Ideal for: • Large-scale component machining • Energy, wind, and railway industries • Mold making, aerospace structures, and shipbuilding 📌 Ready for immediate delivery. Power, scale, and accuracy in one robust CNC machine.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Table size: 3,200 x 1,400 mm MACHINE DETAILS Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Program run time: 27,807 h Njdoy R Dn Hspfx Amyswi Control on time: 83,301 h Machine on time: 73,907 h

Condition: ready for operation (used), Year of construction: 2002, operating hours: 41,859 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,500 mm Number of stations: 90 Head and rotary table: 1,600 x 1,450 mm MACHINE DETAILS Control type: CNC Control: Heidenhain Operating hours Control on-time: 106,253 h Nodpfey R Dnasx Amyowi Machine on-time: 93,170 h Program runtime: 41,859 h

Condition: good (used), total length: 6,000 mm, total width: 1,650 mm, plate height: 300 mm, Manufacturer: STOLLE Type: CAST IRON... Year of construction: 2004 Specifications Metric US Standard Length 6000 mm Width 1650 mm Height Nedjwpva Ejpfx Amyjwi 300 mm Number of T-slots 6 Distance between T-slots / spacing 250 mm T-slot size 27 mm Weight per plate approx. 7200 ton Number of matching pieces 4 Dimensions (estimated) Length 6000 mm Width 1650 mm Height 300 mm Weight 7200 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, you will not be given any representation or contract terms. We recommend that you verify all important details.

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 Nwjdoyf Dp Espfx Amyei 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!