Used Travelling Crane for sale (14,271)

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Lodpex Ev Tksfx Amvehh Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Lhsdpfx Ajptlbljmvsh Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Lhedpfxsxmf R Ss Amvoh Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2000, machine/vehicle number: 201381, load capacity: 10,000 kg, Kuli overhead crane / workshop crane 10t – gauge 19,120 mm – year of manufacture 2000 For sale by auction For sale is a used Kuli overhead crane / workshop crane in good, immediately operational condition. The crane is ideally suited for production halls, workshops, steel construction, or industrial applications. Technical data Manufacturer: Kuli Type: Overhead crane / workshop crane Year of manufacture: 2000 Load capacity / lifting capacity: 10,000 kg (10 t) Gauge: 19,120 mm Overall dimensions including end trucks: approx. 19,360 mm Control: Floor control Overall height from top of crane to hook: approx. 1,600 mm Lifting height of hoist: approx. 5,240 mm Condition The crane is in good used condition and was in operation until recently. Inspection under power is possible by arrangement. Dismantling / Availability The crane will be dismantled in week 27. Until then, the system can be inspected on site. Ledpjy Tlf Ssfx Amvohh Location AQUAtec Master in Metal GmbH Note Loading and transport by arrangement. Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Original price: over €40,000.00 Lhodpfov Uvdpox Amvjh Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. System in inspected condition with inspection logbook, fully functional and ready to use immediately. Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers!

Condition: ready for operation (used), Year of construction: 2025, A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible. Lsdpfx Asy Anuhsmvehh

Condition: excellent (used), functionality: fully functional, 15 new DEMAG crane travel motors / crane motors, some with gearboxes KBF / KBA 71 80 90 100 112 125 140 160 Very good used and tested condition Well below manufacturer's retail price Lhjdpfxsv Uvuhj Amvjh Info: We have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Check out my other offers from my inventory!

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Lodpfx Aog Dgdvsmvehh Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~6.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Lhjdpeg Dgh Isfx Amvsh Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~5.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Lhodpfxjg Dghcj Amvjh Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~14.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Lhjdpfxeg Dgg Re Amveh Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: ready for operation (used), Span: 15,030mm, load: 6.3t, lifting height: 6200mm, weight: 5.3t, including documentation and Trolley SWF. Lhjdpfx Aehyxpmsmvsh

Year of construction: 2014, condition: ready for operation (used), Span: 3150mm, load: 6.3t, lifting height: 5450mm, weight: 2.85t, including documentation and Trolley SWF. Lhjdpfx Amehyxpusveh

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=110x550 Lhodpev N A Iksfx Amveh -Number: 1x axle available -Dimensions: Ø 110 x 550 mm -Weight: 38.9 kg

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley Lhjdpov N A Htjfx Amveh -Type: D=120x320 -Dimensions: see photo technical drawing -Number: 1x axle available -Dimensions: Ø 120 x 320 mm -Weight: 25 kg

Condition: excellent (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=90x244 -Dimensions: see photo technical drawing -Number: 3x axle available Lodpfx Asv N A Hyjmvohh -Price: per piece -Dimensions: Ø 90 x 244 mm -Weight: 10.4 kg/piece

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=240x545 Lodpev N A Iqsfx Amvjhh -Number: 1x axle available -Dimensions: Ø 240 x 545 mm -Weight: 70 kg

Condition: new, DEMAG hoist motors / crane motors / travel motors / drive motors: 1. Hoist motor type - MBV 132 C 12/2 - 1 piece (new). 2. Hoist motor type - MBV 100 A 12/2 - 1 piece (new). 3. Hoist motor type - ZNK 100 A 8/2 - 10 pieces (new). 4. Hoist motor type - ZNK 80 A 8/2 - 1 piece (new). 5. Travel motor type - ZBF 90 B 8/2 - 2 pieces (new). 6. Travel motor type - ZBS 80 b 12 - 8 pieces (new). 7. Travel motor type - ZBA 132 AL B050 - 1 piece 8. Travel motor type - KBA 80 B4 - 1 piece (new). Lodpfxju U Uzno Amvohh 9. Traction motor type - KBA 90 B4 - 2 pieces 10. Traction motor type - ZBA 80 A4 - 2 pieces 11. Lifting motor type - 24/14 K4 P - 1 piece 12. Lifting motor type - 13/6 KF2 - 1 piece 13. Lifting motor type - 13/6 L4 - 1 piece 14. Traction motor type - 13/6 KF 8-2 - 2 pieces

Condition: excellent (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane Ledpfx Aev N A Hasmvehh -Travel wheel axle: for crane trolley -Type: D=120x649.5 Part 3 Crane 1/2 .: 1031 4148 -Dimensions: see photo technical drawing -Number: 3x axle available -Price: per piece -Dimensions: Ø 120 x 649.5 mm -Weight: 35 kg/piece

Condition: ready for operation (used), Year of construction: 2017, Demag Overhead Crane Double-Girder Suspension Bridge Crane Inspection logbook available! Double-Girder Suspension Crane: Manufacturer: Liebl Kranbau GmbH Load capacity: 500 kg Year of manufacture: 2017 Crane track gauge: 4500 mm Length: approx. 6 m Lhedpfxox Eikys Amvsh Width: approx. 5.13 m Chain Hoist: Manufacturer: Demag Model: DC-COM 5-500 Year of manufacture: 2017 Lifting capacity: 500 kg Fine lift speed: 1.1 m/min Main lift speed: 4.5 m/min Hook path: 4 m You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Technical data may deviate and errors in the item description can occur and are subject to change.

Condition: excellent (used), functionality: fully functional, DEMAG 635 H13 hoist, complete Load capacity 10,000 kg, 4/1 reeving Good condition Free delivery within Germany! Lhjdpfsv T Tigsx Amvsh Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Year of construction: 1984, condition: used, 1x Wimag gantry crane Load capacity: 20,000 kg Span: 16 m (adjustable to 12 m in 500 mm increments) Lhjdpoyx Ercofx Amveh Outreach: 0 m Lifting height above rail: 7.5 m Hook travel: 25 m Radio remote control Cable reel suitable for 40 m

Condition: used, 1x gantry crane Working load: 2 x 10,000 = 20,000 kg Span: 24 m Cantilever: 1 x 3 m Lifting height above rail: approx. 8 m Hook travel: 8 m Radio control Complete with crane rail Ledpfx Aoyx Dyfjmvjhh

Year of construction: 2023, condition: like new (used), functionality: fully functional, 1x BKRS gantry crane Ljdpfjyx Dv Tex Amvjhh Working load: 2 x 20,000 = 40,000 kg Span: 29 m Cantilever: 2 x 8.9 m Lifting height above rail: 10 m Hook path: 13.5 m Radio remote control Cable reel suitable for 90 m Complete with crane rail UIC60, length: 2x 180 m

Condition: like new (used), functionality: fully functional, Year of construction: 2019, 1x BKRS gantry crane Rated load: 50,000 kg Span: 21.5 m Cantilever: 2 x 6 m Lodpfeyx Dlhox Amvehh Lifting height above rail: 10 m Hook travel: 45 m Radio remote control Cable drum suitable for 110 m Complete with crane rail UIC60 length: 2x 110 m The crane was used for a tunnel boring project Demag components