Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 0799140181, cutting length (max.): 4,500 mm, saw blade diameter: 380 mm, Double mitre saw DG 79 used, year of manufacture 2018, mat. no. 0799140181 - Cutting length 4500mm Fobu Uu Hou Hhmderspg - Saw blade diameter 380 mm - Swivel range from 0° - 45° infinitely adjustable to the left and right, therefore external and internal dimension cuts possible - Locking points at 15.0°, 30.0° and 45.0° - Hydropneumatic saw feed for precise saw cut - Infinitely variable with rapid traverse - Vertical and horizontal pneumatic material material clamping devices ensure optimum profile fixing Electronics E 111 - Manual cutting length adjustment with digital display - Switchover from absolute dimension to chain dimension - Actual value storage of the display when the power is switched off Technical data: - Smallest cutting length: 520 mm - Voltage: 400 V, 3 PH, 50 Hz - Power output per motor: 3000 W / 4.1 HP - Compressed air connection: 7 bar - Air consumption per work cycle without spraying: 35 l with spraying: 45 l Accessories supplied: - 2 HM saw blades (used) - Dosing spray device - Mobile workpiece support - Profi S3 mobile extraction unit

Condition: used, Year of construction: 1975, machine/vehicle number: 110831, Technical data: Saw blade diameter resp. dimension 360mm Bore 50mm mitre cuts up to 45° possible fence with scale right 2500mm Cutting range 90° double-T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm 45° square steel 95 mm 90° flat steel 200 x 90 mm 45° flat steel 120 x 90 mm pole-changeable motor --additional speeds by belt conversion saw blade speeds 17/32-20/40-25/50 m/min year of construction estimated--no type plate available-- Fobu Uehcbyfeu Hrepg

Condition: good (used), saw blade diameter: 400 mm, - Saw blade 400 mm - Double miter - 2 pneumatic clamps - Mist lubrication system - Blow gun - Protective cap Fpebu Usu Dcbqju Hrog - 400V

Condition: good (used), Stock number: 2861 Type / Model: HN25 (presumably) Cutting range round: 270 mm rectangular: 270x 250 mm blade length: 500 mm opening: 310 mm Control: conventional Stroke rate: 85 and 110 double strokes per minute Fobu Ustuix Ssu Hrepg Connection: 1.7 kW Clamping jaws WxH: 180 x 120 mm Accessories/equipment: automatic switch-off Condition: good weight: 0,7 t Dimensions: 1,400 x 650 x 1,000 mm

Condition: new, Year of construction: 2020, * manual cutting cycle * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles * Vise with quick adjustment * HM band guides for highest cutting precision * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm Fjbu Uu Hsftmxvorepg * Cutting range at 90 degrees: square 220 mm * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Condition: good (used), Technical parameters Maximum cutting capacity Round 650mm Square 650×800mm Saw blade Saw blade speed 20~80 m/min Saw size 54X1.6 Guides Carbide and bearing blade guides Cleaning Wire brush & flood coolant Tension Hydraulic Motor power Fobu Uu Heullzhjrjpg 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Condition: good (used), Year of construction: 2000, Functionality: fully functional, center width: 1,000 mm, center height: 205 mm, spindle bore: 52 mm, swing diameter over top slide: 410 mm, spindle speed (max.): 2,000 rpm, type of input current: three-phase, overall weight: 1,150 kg, Horizontal lathe - in between centers: 1000mm - diameter above bed: 410mm - centerheight: 205mm - spindle bore: 52mm - spindle speed: 2000mm max. Machine equipped with: - selfcentering 3 jaw chuck - independant 4 jas Chuck - fix and steady rest - drill chuck Fpjbu Uujuyynao Hreg - lubrication unit

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 1049333220, cutting length (max.): 4,500 mm, saw blade diameter: 420 mm, double mitre saw 4,5 m D=420mm; E 355; 22,5° inside second-hand, year of manufacture: 2008 M-No.: 1049333220 - cutting length 4.500 mm - saw blade diameter 420 mm - Swivel range inwards, pneumatic 90° - 45° (up to 22.5° manual with digital display) - External dimension cutting for all cutting variants. This eliminates the need for length calculations necessary. Great advantage for special angles. Positioning control E355 - Drive-independent measuring system - Positioning accuracy +/- 0.1 mm per meter - Pneumatic locking in position - 5" matrix display with membrane keypad and handwheel for navigation in the operating menus - Memory for 999 data records Correction values for profiles - The record memory can store the record number, length dimension, profile number, angle position and number of pieces can be saved - Switch to 2nd language - Switchover mm/inch - RS 232 interface Technical data: Fpobjuw T Stou Uu Hrjg Smallest cutting length at 90°: 335 mm Smallest cutting length at 45° inclination: 335 mm Voltage: 400V, 3 PH, 50 Hz Power output per motor: 4 kW Compressed air connection: 7 bar Air consumption per work cycle without spraying: 40 l with spraying: 64 l Accessories supplied: 2 carbide saw blades for aluminum and PVC (used): 420 mm diameter, 96 teeth Dosing spray device The following accessories are also included: 1x mobile workpiece support

Condition: good (used), Year of construction: 2019, Functionality: fully functional, Machine type: Amada - Schubert High Performance Saw used Make: AMADA - Schubert Type: CMB-100 CNC / TRB-SAV Year of construction: 2019 with thin blade technology in standard version, fully automatic Cutting range: 25-101 mm Blade feed: 0-30 mm/sec Saw blade: 360 x 40 x 2.5 Cutting speed: 56-210 min Weight: 2800 kg Febuouv Hlkj Uu Hrepg further technical details on request Heavy duty feeding system for automatic separation of round and square material from 30 - 100 (140) mm and up to 8 m in length Brief description: Our feeding systems are particularly low-maintenance and robust. They are mainly used in heavy-duty areas and forging operations. 1 piece SAV 140/8 V-conveyor in standard design for processing bars up to 8 m in length. Make: Schubert General: Dimensions (L/W/H): 6500 mm/ 1500 mm/ 1500 mm Support weight: approx. 5 tons Transfer height: variable Number of supports: 4 pieces at a distance of approx. 1600 mm Drive: 2.2 kW geared motor with brake + friction clutch

Condition: excellent (used), saw band length: 6,300 mm, total height: 41 mm, Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel moving band saw blade, for cutting profiles, pipes and solid material solid material in all qualities, including materials that are extremely difficult to cut (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit made of solid polymer concrete, This ensures maximum running smoothness and service life of the saw bands. Guidance of the saw unit via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw band guides. The material is clamped using two hydraulic clamping vices. The control system offers simple machine operation. The length can be set via a counter with 0.1 mm resolution. The number of pieces is set via a piece counter, which switches the machine off when the number of pieces is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal bandsawing machine HBA 420 AU CNC ( 420 mm x420 mm /Ø 420 mm) Fully hydraulic high-performance bandsawing machine in heavy-duty design, with horizontal parallel moving band saw blade, for cutting profiles, tubes and solid material in all qualities, including grades, including extremely difficult-to-cut materials (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit in solid design made of polymer concrete, thus ensuring maximum running smooth running and long service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw blade guides. Material clamping via two horizontal frame vices. Material feed via a non-driven roller conveyor integrated in the machine with twelve transport rollers. transport rollers integrated in the machine, making it easy to transport short offcuts. Cutting range round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed infinitely variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction infinitely adjustable Material support height 700 mm Saw blade dimensions 6300x41x1.3 mm Shortest cut-off length in automatic mode 6 mm Remaining piece length in automatic mode 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Fpjbujt Tvqie Uu Hrsg Weight 2920 kg Year of construction 1989 Accessories: chip conveyor, coolant device

Condition: not inspected (used), Year of construction: 2015, machine/vehicle number: F00112, 6500 mm jaw feed Remaining piece flap strip deviation control Micronizer SLE 600 Fpsbu Uuegwq Ige Hrog Extension version M330 3M Vertical roller VR-M Remaining piece remover DSTV interface

Condition: good (used), Year of construction: 2004, saw band length: 2,530 mm, saw band width: 20 mm, For details see description and pictures; incl. mobile base frame and roller table Fpeboqqh N Aeu Uu Hrog incl. 3 pieces of completely new saw blades - dimensions 2540 x 20 x 0.9 mm

Condition: used, Functionality: fully functional, saw band length: 4,800 mm, saw band width: 16 mm, type of input current: three-phase, net weight: 1,200 kg, Equipment: rotational speed infinitely variable, Pehaka USF -10-R good condition-ready for immediate use. Table size 750x840mm hydraulically movable, fixed table 500x580mm Belt speeds: 12m/min to 2000m/min Infinitely variable variator Filing belt device Circular cutting device no welding device Transport can be organized on request for a fee free truck, loading is no problem for collection Collection possible at any time Shipping also outside the EU Febu Usrntk Nsu Hropg for further questions please call

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off Fjbuoupxupe Uu Hrspg 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Band Saw Febu Uujupkh Ie Hrepg SABI 4 KGM

Condition: new, Year of construction: 2024, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Fpobu Uu Hegcbwgjreg

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 100 mm capacity 90 degrees: square 100 mm Febjupxaxeu Uu Hrepg capacity 90 degrees: flat 100 x 195 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 100 x 135 mm saw blade turning speeds 2800 U/min total power requirement 1,5 kW weight of the machine ca. 250 kg dimensions 0,7 x 0,7 x 1,4 m ATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine base

Condition: new, Year of construction: 2024, sawing system type "ORIX" Febsfu Tgrju Uu Hrjpg With the sawing system, a wide variety of aluminum profiles can be processed fully automatically. The machine consists of a stable base. Star guides and precision carriages are used to position the saw unit. The drives are equipped with servo motors. For sawing, the saw unit moves 300 mm forwards on the Y-axis and can easily saw special profiles, panels or Item and Bosch profiles. The support table consists of moveable rollers that are moved to the correct position depending on the section length. All rollers are also mounted on precision carriages. The saw also has a stable storage table on which the sawn-off aluminum parts are placed. (Optionally, the sawn parts can also be transported away directly via a conveyor belt, including the chips). The machine is available with a section length of 6,000 mm. It therefore has a total length of 7,000 mm. The sawing system is delivered with a suitable 2-channel minimum quantity spray system. In addition, the system will be delivered with a 400 or 600 saw blade.

Condition: new, saw blade diameter 355 mm Fpjbu Uu Heupw Tkorog capacity 90 degrees: round 115 mm capacity 90 degrees: square 120 x 106 mm capacity 90 degrees: flat 102 x 197 mm 25,4 mm connected load frequency 230 V total power requirement 2,3 kW weight of the machine ca. 28 Kg Dimensions (LxWxH) 0,6 x 0,35 x 0,45 m Machine for cutting pipes and profiles made of steel, light metal, Plastic, non-ferrous metal and composite materials.

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel Fpebu Ujgwt S Teu Hrjg • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125 mm 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. Febsupw R Nsu Uu Hropg With a weight of only 25 kilograms, the saw can be used mobile.

Condition: new, Year of construction: 2024, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Fobu Uu Hjgwt S Eerjpg Please do not hesitate to contact us.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration Fpjboupw R Aeu Uu Hrjg • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: new, Year of construction: 2024, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Fobu Uujkqz H De Hrjpg

Condition: new, capacity 90 degrees: round 130 mm capacity 90 degrees: square 127 x 127 mm dimensions of saw-band 1140 x 13 x 0,65 mm band speed max. 144 m/min total power requirement 1,1 kW weight of the machine ca. 15 kg dimensions 500 x 300 x 400 m Portable and removable metal band saw Special features Powerful with 1100 watts. Fpsbusupw N Eo Uu Hrjg Including 2 saw bands, work table and integrated LED lighting. With adjustable, variable handle. Light and handy. For universal work in the workshop, on the construction site or for private use.