Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-135° Crsliqk Debrq Sbexjb The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does not change with the mitre angle Digital mitre display, accuracy 0.1° Fast material clamping. Material is always clamped at 90° regardless of the angle to be cut Hydraulic material clamping via full-stroke clamp MEBA – Power-Package “HSS“ Hydraulic lifting and lowering of the saw frame hydraulic clamping of the material stepless, hydraulic cutting pressure- and feed regulator display of lowering speed via scale display of cutting pressure via manometer rapid lowering of the s aw frame via button until material edge Complete coolant equipment with electro-pump Chip box Saw blade drive with end of cut stop Combined precise saw blade carbide-roller guidance with saw blade brush Instruction manual and spare parts list on CD-ROM Frequency regulated AC-drive 15-150 m/min, 3 kW Colour silvergrey/ bluegrey (RAL 7001 / RAL 7031) 1 saw blade 4/6 tpi Additional standard equipment for 405 DG --ᐳ Control panel separately mounted Model Semi-Automatic Mitre 90° Ø 410mm, square 620x410mm 45° right Ø 360mm, square 420x360mm 30° right Ø 300mm, square 300x300mm 45° left Ø 300mm, square 300x300mm Motor:[kW]3 Blade:[mm]5000x34x1,1 Blade speed: 15-150 m/min Working heigt:[mm]750

Condition: used, Year of construction: 1988, roll diameter 420 mm throat 410 mm workpiece height 295 mm cutting speed 12 - 375 m/min table surface area 600 x 600 mm Croliqevdwv Ejk Dxjb saw band length 3150-3260 // 3-16 mm work height max. 1020 mm voltage 380 V total power requirement 1.1 / 1.7 kW weight of the machine ca. 620 kg dimensions of the machine ca. 1000 x 800 x 1900 mm from a maintenance workshop - good condition (!!) Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base * Machinevideo : ?v=UVpE_bLGHa0

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cjliqk Djvdk A Esxerb Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2007, Bomar Sawing machine type AL 600 Cjliqk Dovmf Eaexjrb

Condition: used, Vertical band saw HESKA type ESA 4 make no. 681174 year of construction approx. 1985 roll diameter 420 mm throat 400 mm table size 500 x 500 mm cutting height 285 mm saw band length min. 3200 - max. 3400 mm Saw band speed gear stage (1) 15-140 m/min. Saw band speed gear stage (2) 150-1400 m/min. Motor power 1,5 kW mains connection 380 volt, 50 Hz Celiqk Dodzqrvexerb - infinitely variable saw band speed via PIV gear with hand wheel adjustment and 2 gear steps - saw table tiltable in 2 axes - machine light space requirement L x W x H 950 x 750 x 1820 mm weight approx. 500 kg good condition

Condition: good (used), Used cold circular saw from EISELE EISELE VMS-III-S-PV cold circular saw Current 400V 16A Motor power 2 / 2.6kW Automatic sequence: close vice, down/up, open vice Creliqk Dovl T Nkjxob Requires compressed air 4-6 bar for pneumatics Miter cuts possible Saw blade revolutions 17 and 34 rpm Saw blade diameter max 350mm (300mm mounted) Coolant device with pump With roller conveyor on the left approx. 2m Total weight approx. 400kg UVV would need to be renewed Good condition. Fully functional. Inspection and collection possible Shipping Germany (excluding islands) 149.00 euros net The goods can be inspected at the 59379 Selm location by appointment. You will receive an invoice with VAT shown. Payment information: Payment by bank transfer before delivery of the goods. Or cash payment upon collection.

Condition: new, Year of construction: 2025, Standard equipment: MEBA – Power Package Stepless, hydraulic cutting pressure- and feed regulator Display of lowering speed via scale Display of cutting pressure via manometer Rapid lowering of the saw frame via button until material edge NC-Mitre capacity 30° - 150° (+/- 60°) Hydraulic full-stroke material clamping Modern, vibration damping saw frame guidance through 2-column linear guidance Powerful AC saw blade drive with high efficiency and low energy consumption Inclination of saw blade to vice bed approx. 3° Height setting of saw frame passage Saw blade drive with stop at end of cut Movable saw blade guide for adjustment according to material width Combined precise saw blade carbide-roller guidance Saw blade tension hydraulically with pressure-release (stand still of machine) Saw blade cleaning brush Exclusively MEBA micro sprayer Monitoring of saw blade motion and saw blade breakage Electronic SPS-control Material clamping always closest to bandsaw blade Material and shortest remaining pieces Control panel separately mounted Colour silver grey / blue grey (RAL 7001 / RAL 7031) Instruction manual and spare parts list on CD-ROM Ausfuehrung Cslsbnkk Sjiqk Dxorb Halbautomat Cutting dimension 90° Ø 510mm; square 1100x500mm 30° left, Ø 450mm, square 450x500mm 45° left, Ø 510mm, square 700x500mm 30° right, Ø 450mm, square 450x500mm 45° right, Ø 510mm, square 700x500mm Motor:[kW] 9,0 Saw blade: [mm]9300x54x1,6 Speed: 15-150 m/min Working height:[mm] 630

Condition: used, Year of construction: 1989, saw blade diameter 320 - 350 mm cutting diameter 120 mm turning speeds 16 / 25 U/min total power requirement 2,0 kW weight of the machine ca. 1,36 t Coliqk Djvl Tqzjxerb dimensions 1,0 x 0,8 x 1,8 m Cold circular saw with - 45 degree miter - coolant system - incl. 3 saw blades

Condition: used, Year of construction: 2007, cutting diameter 260 mm saw band length 3660 x 34 x 1,1 mm capacity 90 degrees: flat 280 x 260 mm vice 280 mm turning speed range: 20 - 120 m/min work height max. 660 mm voltage 400 V total power requirement 3.75 kW weight of the machine ca. 1700 kg. dimensions of the machine ca. 2000 x 1520 x 1240 mm New price ~ 18.000 euros very few operating hours (!) Furnishing: - column guided band saw - fully automatic - Fully automatic vise system - Feed unit ensures accurate positioning of the material * Feed length - single stroke : 400 mm - hydraulic vise clamping - hydraulic saw blade tensioning - 34 mm wide band saw blade. - Infinitely variable speed adjustment of the saw band - automatic chip conveyor - Spare bandsaw blades Crjlisvb Ix Eeqk Dxeb

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Carif bandsaw automat Model 320 BSA Cjliqevlx Apsk Dxjrb Year : 2008 Capacity round : 275 mm. Capacity rekt. : 320 x 230 mm. Capacity square : 265 mm. Angle cutting : 45 og 60 degrees

Condition: used, Vertical band saw JAESPA type MSU 4 make no. 724749 year of construction approx. 1980 roll diameter 420 mm throat 400 mm table size 610 x 610 mm cutting height 260 mm saw band length min. 3200 - max. 3400 mm Crjliqkjd Nbk To Dxjb saw band speed 10-1500 m/min. infinitely variable mains connection 400 Volt, 50 Hz - infinitely variable saw band speed via 2 gear steps and infinitely variable via belt drive - saw table tiltable - Saw blade butt welding machine IDEAL BS0-16 - saw blade shear - Grinding stone for grinding the weld seam space requirement L x W x H 1000 x 850 x 1850 mm weight 400 kg good condition

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 28351, in excellent condition, plug and cut Csliqk Dovlwamoxorb

Condition: new, Year of construction: 2025, MEBAbase: The must-have for doers. The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone. The portfolio ranges from small manual mitre saws to automatic straight-cutting machines and is therefore the basis for your workshop. The universally applicable MEBAbase 17G mitre bandsaw machine is ergonomically sophisticated and has an optimum price-performance ratio. Simple centralised operation. Technical data Cutting range 90° - 175 - 200x75 or 190x135mm 45° - 110 - 150x110mm 30° - 75 - 100x 70mm Cutting speed 35 - 80m/min Drive - band saw blade Cjlodb Rwasiqk Dxsrb 2kW; 230V, 50Hz Saw blade tension electrically monitored Saw blade dimensions 2140 x 20 x 0.9mm Saw blade weight 143 KG Dimensions of the machine 1080 x 800 x 1750mm Basic equipment of the MEBAbase 17 G - Fast mitre adjustment from 90° - 45°, infinitely variable according to scale to 0.5° accuracy - Mitre pivot point is the intersection point between the saw blade and the material system, which is why there is no change in the length dimension when the angle is changed - Powerful 2000 W motor - Manual quick material clamping. - Complete coolant system - Saw blade tension electrically monitored - 1 saw blade on the machine 6/10 ZpZ - Saw blade drive with limit switch - Operating instructions and spare parts list (digital) - Paint finish anthracite (RAL 7016) Subject to technical modifications. The machine consists of two parts and must be assembled according to the assembly instructions. You will receive details of the exact delivery time in the order confirmation.

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Coliqksvbwfnj Dxerb

Condition: good (used), Year of construction: 2001, Separator TEBA 240 DG Round 240 mm Rectangular 230 x 230 mm Motor 1,5kW Crslisu Ekw Njqk Dxeb Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saws 90° / -45° / +45°/ +60° Cutting speed: 40/80 m/min.

Condition: excellent (used), Year of construction: 2014, Automatic double head saw ELUMATEC DG 244 + E 355 YEAR 2014 Creljm H Udbsiqk Dxsb The proven elumatec "Cut from below" principle: This ensures free access to the support tables The large diameter of the saw blade and its optimal use guarantee the right cutting performance in all cutting variants For elumatec, it goes without saying: the ability to cut to the outside dimension in all angle settings. This eliminates the need to carry out different length calculations for profiles of different heights. A huge advantage for special angles The universal pivoting and tilting of the saw unit allows you to cut tall and wide profiles and make all types of cuts that require a two-plane tilt. Thanks to this, many profiles can be cut without the use of supports Protective covers Serially equipped with saw blades Dosing spray devic

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve Croliqk Djlqadhjxob - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg good condition

Condition: excellent (used), V. Bandsaw, manufactured by Elektra Beckum, type BAS 315/4 Year of manufacture: 1994 throat 315 mm Saw blade length: 2240mm Crjliqk Dovbf Svexob Voltage: 220V Cutting depth: 170mm Accessories: Saw bands, length stop, angle adjustment for miter cuts

Condition: new, Year of construction: 2025, The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone. The universally applicable MEBAbase 25 G mitre bandsaw is ergonomically sophisticated and has an optimum price-performance ratio. Simple centralised operation. Technical data: Cutting range 90° - 255 - 265x200 or 200x200mm 45° - 175 - 200x160mm 30° - 110 - 115x100mm Cutting speed 35 / 70m/min Drive - saw blade 2kW; 400V, 50Hz Cjlist Rv Iioqk Dxerb Saw blade tension electrically monitored Saw blade dimensions 2565 x 27 x 0.9mm Weight 265 KG Dimensions 1180 x 1500 x 1750mm Basic equipment of the MEBAbase 25 G - MEBA mitre system: Large, swivelling table prevents sawing into the material support surface - low wear costs! The material is always clamped at right angles close to the saw blade. - Fast mitre adjustment from 90° - 45°, infinitely variable according to scale to 0.5° accuracy - The mitre pivot point is the intersection point between the saw blade and the material system, which is why there is no change in the length dimension when the angle position changes - Manual quick material clamping. - Material stop with scale up to 500 mm - Complete coolant system - Saw blade tension electrically monitored - 1 saw blade on the machine 6/10 ZpZ - Saw blade drive with limit stop - Operating instructions and spare parts list (digital) - Paint finish anthracite (RAL 7016) Subject to technical modifications. The machine consists of two parts and must be assembled according to the assembly instructions. You will receive details of the exact delivery time in the order confirmation.

Condition: used, Year of construction: 1999, cutting width 150 mm machine weight ab. 300 kg 27468 Coliqeva Nqgok Dxorb

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. Positive stops at 30° + 45° left and right hand Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder Environmentally-friendly micro spray lubrication system Chip box inside Saw blade drive with end of cut stop Precise saw blade carbide-roller guidance Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment Hydraulic lift up of saw frame Model Manual Miter 30° left Ø 130mm; square 120x120mm Croliebi S Dijqk Dxsb 45° left Ø 200mm; square 180x180mm 90° Ø 260mm; square 300x260mm 45° right Ø 200mm; square 180x180mm 30° right Ø 130mm; square 120x120mm Motor:[kW] 1,8 Saw blade: [mm]3350x27x0,9 Speed: 35/75 m/min Working heigt:[mm] 900

Condition: new, Year of construction: 2025, Space saving high-tec MEBApro 260 AP Standard equipment 2-column-linear guided saw frame Crjlobv Nk Eoiqk Dxob Feed by adjustable frequency controlled lead screw drive with automatic pressure regulation for best cutting performance and saw blade life Steplessly variable saw blade speed with powerful, frequency regulated drive Central and easy to use control panel Adjustable saw frame height by sensor system Combined precise saw blade carbide-roller guidance with saw blade brush Inclination of saw blade to vice bed approx. 2° Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment NC-controlled, automatic infeed with hydraulic material full-stroke clamping Simple operating by NC-control with clear text message display by SPS control Material infeed without re-clamping of material at short sections Stable, linear guided infeed gripper with servo positioning for highest accuracy Automatic adjustment of saw blade guidance to material width Driven saw blade cleaning brush

Condition: new, Year of construction: 2025, type: straight cutting bandsaw 90° sawing process: automatic automation: serial-cut max. cutting capacity Ø: 330 mm max. cutting capacity width: 350 mm max. cutting capacity height: 330 mm Highlights: Celiqksdr Sabo Dxorb • Fully enclosed high performance bandsawing machine for safe, clean, and quiet operation • Compact and practical construction: space saving, easy to access during machine commissioning, saw blade change (large doors) and maintenance activities (inspection openings) • Carbide compatible power-package: sawing of solid material, tubes, and profiles. Trouble free cutting of hardened material while saving blade life • Maximum, reliable productivity for continious runs in single- and multi-shift operation • Secure transport of material by closed roller table. Increased, hardened tensioning elements and a high clamping force guarantee an efficient transport of materials. The result: product quality • Dynamics and power: saw feed and material feed by ball lead screw with servo-motor for accurate cuts, without compromises • Precision and reliability: use of latest linear ball guideways to provide solid smooth running • Minimum length of remaining piece by innovative vice system

Condition: new, Year of construction: 2025, Product information for metal bandsaw type: straight cutting bandsaw 90° sawing process: automatic automation: serial-cut max. cutting capacity Ø: 300 mm max. cutting capacity width: 300 mm max. cutting capacity: height: 300 mm Technical data: Motor [kW]: 3 Saw blade [mm]: 4900 x 34 x 1,1 Dimensions [mm] (length x width x height): 2500 x 1650 x 1800 Weight [kg]: 2500 Material weight: max. 250 kg/m Highlights: Machine cover: secure and compact Celsdr Sbkoiqk Dxorb Saw blade guiding: accurate and reliable Saw frame speed: powerful and dynamic Vice system: innovative and smooth Operation and control: intelligent and ergonomic

Condition: new, Year of construction: 2025, MEBAeco Ready-made individuality Central and easy to use control panel Movable blade guide arm, adjustable to suit material width Combined precise saw blade carbide-roller guidance Saw blade tension by torque wrench Coolant equipment can be combined with MEBA micro-coolant system MEBA power package Lifting and lowering of the saw frame with a frequency regulated lead screw drive, with automatic cutting pressure and feed regulator. Rapid lowering of the saw frame via button until material edge Powerful, frequency-controlled saw blade drive Creljbzll Hsiqk Dxsb Hydraulic material full-stroke clamping Minimum speed- and saw blade control on the bandwheel Ergonomic panel based on „Windows CE“ system software Stepless height adjustment by height sensing Automatic material feed: Compact design for short sections and flexible infeed shuttle system for almost any length available Electric mitre swivelling by servo motor