Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Crjb Hlwwsvf N Sujmob Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Year: 2008 Max. disk diameter: 300 mm Cobjf Ecwzo Hlwwmorb Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg Cob Hot A Ar Sjlwwmjrb The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Year of construction: 1989, Condition: used, cutting diameter 420 mm saw band length 6300 mm table height 700 mm 0 5,5 kW Ceb Hlworc I H Eowmerb cutting speed 20-130 m/min min. cut-off length 6 mm min. dia. 10 mm weight of the machine ca. 2,9 t dimensions of the machine ca. 2,4x3,3x2,4 m Fully automatic band saw, saw band tension hydraulic, cutting feed continuously variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min.

Condition: good (used), Year of construction: 1997, Functionality: fully functional, saw band length: 4,500 mm, saw band width: 20 mm, total height: 2,360 mm, total length: 1,250 mm, total width: 1,500 mm, overall weight: 900 kg, table width: 660 mm, table length: 660 mm, working height: 950 mm, workpiece weight (max.): 350 kg, throat depth: 610 mm, power: 3 kW (4.08 HP), Vertical Bandsawing-, Filing-, Grinding- and Polishing Machine, band speed 15-1600 m/min, motor 3 KW, band dimension 4500x20 mm, table size 660x660 mm, table high 950 mm, throat 610 mm, dimension 1250x1500x2350 mm, weight ca. 900 kgs Cjb Heu Rghzelwwmjrb

Condition: new, Year of construction: 2025, 2-column-linear guided saw frame Feed by adjustable frequency controlled lead screw drive with automatic pressure regulation for best cutting performance and saw blade life Steplessly variable saw blade speed with powerful, frequency regulated drive Central and easy to use control panel Ceb Hjbi S E Rjlwwmjrb Adjustable saw frame height by sensor system Saw frame mounted over working surface, thereby guidance is clear Combined precise saw blade carbide-roller guidance with saw blade brush Inclination of saw blade to vice bed approx. 2° Mounting elements Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment Digital mitre display 90°- 30° Centre of rotation is at intersection of saw blade and fixed vice line, there is no change in measurement at any mitre angle Integrated roller support 2000 mm Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut Chip box inside Environmentally-friendly micro spray lubrication system Model Semi-automatic Miter 90° Ø 260mm, square 300x260mm 45° right Ø 240mm, square 220x260mm 30° right Ø 140mm, square 140x200mm Motor: [kW] 1,5 Saw blade: [mm] 3350x27x0,9 Speed: 15-150 m/min Working height:[mm] 750

Condition: used, Year of construction: 1988, roll diameter 420 mm throat 410 mm workpiece height 295 mm cutting speed 12 - 375 m/min table surface area 600 x 600 mm saw band length 3150-3260 // 3-16 mm work height max. 1020 mm voltage 380 V total power requirement 1.1 / 1.7 kW weight of the machine ca. 620 kg dimensions of the machine ca. 1000 x 800 x 1900 mm from a maintenance workshop - good condition (!!) Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base Crjb Hlwwovdwv Eemeb * Machinevideo : ?v=UVpE_bLGHa0

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Crsbjvdk A Ee Hlwwmsb Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 1984, machine/vehicle number: 0278, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg Csb Hlwwot A Arlemorb The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Year of construction: 1976, Condition: used, cutting diameter 460 mm Cjb Hlorc I Htowwmjrb saw band length 4623 mm table height mm 0 4 kW cutting speed 8-80 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 2,3y2,7x2 m

Condition: good (used), Year of construction: 1998, Automatic band saw, capacity Ø 260 mm, 90°-cut, cutting speed 17-110 m/min stepless, motor 2,3 kw 2-speed, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device, dimension 2260x2100x1700 mm, weight ca. 1300 kg Crjb Hsmxliwolwwmeb

Condition: new, Year of construction: 2025, MEBAbase: The must-have for doers. The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone. The portfolio ranges from small manual mitre saws to automatic straight-cutting machines and is therefore the basis for your workshop. The universally applicable MEBAbase 24 DG mitre bandsaw machine is ergonomically sophisticated and has an optimum price-performance ratio. Simple centralised operation. Technical data Cutting range 90° - 240 - 310x240 45°l. - 200 - 200x200 45°r. - 200 - 200x200 30°r. - 140 - 200x140 Remaining piece length 60mm Cutting speed 35 and 75m/min pole switchable Drive - saw blade 1.10/1.8kW; 3 x 400V, 50Hz Saw frame feed Infinitely variable up to 200mm/min, hydraulically adjustable Saw blade tension Mechanical Saw blade dimensions 2910 x 27 x 0.9mm Working height 900mm (without set-up elements) Weight 470kg Dimensions 800 x 1750 x 1500mm Basic equipment of the MEBAbase 24 DG MEBA mitre system: Large, swivelling table prevents sawing into the material support surface - low wear costs! The material is always clamped at right angles close to the saw blade. Manual mitre adjustment from 90° - 30°, infinitely variable according to scale to 1.0° accuracy The mitre pivot point is the intersection point between the saw blade and the material system, which is why the length dimension does not change when the angle is changed Cob Hlwenfvl Sewmorb End stops at 30° - 45° - 90° - 45° Hydraulic quick material clamping. The material is clamped in parallel at 90° for every angular position of the saw frame. Centralised machine operation Cutting pressure reduction due to the dead weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via hydraulic damping cylinder and weight equalisation spring Saw blade drive with limit stop Stepless clamping jaw adjustment Movable band guide arm, adjustment to material width Saw blade deflection roller carbide guide Practical chip collection tray with drip tray Rotating chip cleaning brush Mechanical saw blade tensioning Operating instructions and spare parts list (digital) 1 MEBA bimetal band saw blade 4/6 ZpZ mounted on machine Complete coolant system Paint finish anthracite (RAL 7016) Subject to technical changes. You will receive details of the exact delivery time in the order confirmation.

Condition: used, Year of construction: 2007, Bomar Sawing machine type AL 600 Crjb Hsvmf Eaelwwmsb

Condition: good (used), Year of construction: 2005, Bandsaw, semi automatic, Capacity Ø 275 mm, cutting speed 15...100 m/min stepless, mitre angle -45°...+60°, Motor 2,2 KW, pneu,matic vertical clamping, coolant device, dimension 150x960x132 cm, weight ca. 620 kg; inclusive 3-meter measuring conveyor Crob Hlstp I T Iswwmeb

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-135° The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does not change with the mitre angle Digital mitre display, accuracy 0.1° Ceb Hobrq Txelwwmsrb Fast material clamping. Material is always clamped at 90° regardless of the angle to be cut Hydraulic material clamping via full-stroke clamp MEBA – Power-Package “HSS“ Hydraulic lifting and lowering of the saw frame hydraulic clamping of the material stepless, hydraulic cutting pressure- and feed regulator display of lowering speed via scale display of cutting pressure via manometer rapid lowering of the s aw frame via button until material edge Complete coolant equipment with electro-pump Chip box Saw blade drive with end of cut stop Combined precise saw blade carbide-roller guidance with saw blade brush Instruction manual and spare parts list on CD-ROM Frequency regulated AC-drive 15-150 m/min, 3 kW Colour silvergrey/ bluegrey (RAL 7001 / RAL 7031) 1 saw blade 4/6 tpi Additional standard equipment for 405 DG --ᐳ Control panel separately mounted Model Semi-Automatic Miter 90° Ø 325mm, square 500x300mm 45° right Ø 360mm, square 300x300mm 30° right Ø 200mm, square 200x200mm 45° left Ø 300mm, square 300x300m Motor:[kW]3 Blade:[mm]4200x34x1,1 Blade speed: 15-150 m/min Working heigt:[mm]750

Condition: new, Year of construction: 2025, MEBA 335 G-500 and MEBA 335 GA-500 Central and easy to use control panel Movable blade guide arm, adjustable to suit material width Combined precise saw blade carbide-roller guidance with saw blade brush Saw blade cleaning brush Saw blade tension with torque wrench Instruction manual and spare parts list on CD-ROM Coolant equipment can be combined with MEBA micro sprayer Colour silver grey / blue grey (RAL 7001 / RAL 7031) Lifting an lowering of the saw frame with a frequency regulated lead screw drive, with automatic cutting pressure and feed regulator. Rapid lowering of the saw frame via button until material edge Frequency regulated AC-drive 15-150 m/min Hydraulic material clamping via full stroke clamp Digital mitre display, accuracy +/-0,1° Crsbebi S H Io Hlwwmjb Mitre capacity 30° - 135° Patented mitre system (ERP Nr. 0491120) Automatic movement of the vices. The material is always clamped rectangular and close to the saw blade Model Semi-automatic Miter 45° left Ø 305mm, square 305x335mm 90° Ø 335mm, square 500x335mm 45° right Ø 330mm, square 320x335mm 30° right Ø 180mm, square 170x335mm Motor:[kW]3 Saw blade: [mm]4400x34x1,1 Speed: 15-150 m/min Working height: [mm]750

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-135° The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does not change with the mitre angle Ceb Hljbrq Sbswwmjrb Digital mitre display, accuracy 0.1° Fast material clamping. Material is always clamped at 90° regardless of the angle to be cut Hydraulic material clamping via full-stroke clamp MEBA – Power-Package “HSS“ Hydraulic lifting and lowering of the saw frame hydraulic clamping of the material stepless, hydraulic cutting pressure- and feed regulator display of lowering speed via scale display of cutting pressure via manometer rapid lowering of the s aw frame via button until material edge Complete coolant equipment with electro-pump Chip box Saw blade drive with end of cut stop Combined precise saw blade carbide-roller guidance with saw blade brush Instruction manual and spare parts list on CD-ROM Frequency regulated AC-drive 15-150 m/min, 3 kW Colour silvergrey/ bluegrey (RAL 7001 / RAL 7031) 1 saw blade 4/6 tpi Additional standard equipment for 405 DG --ᐳ Control panel separately mounted Model Semi-Automatic Mitre 90° Ø 410mm, square 620x410mm 45° right Ø 360mm, square 420x360mm 30° right Ø 300mm, square 300x300mm 45° left Ø 300mm, square 300x300mm Motor:[kW]3 Blade:[mm]5000x34x1,1 Blade speed: 15-150 m/min Working heigt:[mm]750

Condition: new, Year of construction: 2025, Standard equipment: MEBA – Power Package Stepless, hydraulic cutting pressure- and feed regulator Display of lowering speed via scale Display of cutting pressure via manometer Rapid lowering of the saw frame via button until material edge NC-Mitre capacity 30° - 150° (+/- 60°) Hydraulic full-stroke material clamping Modern, vibration damping saw frame guidance through 2-column linear guidance Powerful AC saw blade drive with high efficiency and low energy consumption Inclination of saw blade to vice bed approx. 3° Height setting of saw frame passage Saw blade drive with stop at end of cut Movable saw blade guide for adjustment according to material width Combined precise saw blade carbide-roller guidance Saw blade tension hydraulically with pressure-release (stand still of machine) Saw blade cleaning brush Exclusively MEBA micro sprayer Monitoring of saw blade motion and saw blade breakage Electronic SPS-control Crebobnkk So Hlwwmjb Material clamping always closest to bandsaw blade Material and shortest remaining pieces Control panel separately mounted Colour silver grey / blue grey (RAL 7001 / RAL 7031) Instruction manual and spare parts list on CD-ROM Ausfuehrung Halbautomat Cutting dimension 90° Ø 510mm; square 1100x500mm 30° left, Ø 450mm, square 450x500mm 45° left, Ø 510mm, square 700x500mm 30° right, Ø 450mm, square 450x500mm 45° right, Ø 510mm, square 700x500mm Motor:[kW] 9,0 Saw blade: [mm]9300x54x1,6 Speed: 15-150 m/min Working height:[mm] 630

Condition: new, Year of construction: 2025, MEBAbase: The must-have for doers. The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone. The portfolio ranges from small manual mitre saws to automatic straight-cutting machines and is therefore the basis for your workshop. The universally applicable MEBAbase 17G mitre bandsaw machine is ergonomically sophisticated and has an optimum price-performance ratio. Simple centralised operation. Technical data Cutting range 90° - 175 - 200x75 or 190x135mm 45° - 110 - 150x110mm 30° - 75 - 100x 70mm Cutting speed 35 - 80m/min Drive - band saw blade 2kW; 230V, 50Hz Saw blade tension electrically monitored Saw blade dimensions 2140 x 20 x 0.9mm Saw blade weight 143 KG Dimensions of the machine 1080 x 800 x 1750mm Basic equipment of the MEBAbase 17 G - Fast mitre adjustment from 90° - 45°, infinitely variable according to scale to 0.5° accuracy - Mitre pivot point is the intersection point between the saw blade and the material system, which is why there is no change in the length dimension when the angle is changed - Powerful 2000 W motor - Manual quick material clamping. Creb Hodb Rwaslwwmeb - Complete coolant system - Saw blade tension electrically monitored - 1 saw blade on the machine 6/10 ZpZ - Saw blade drive with limit switch - Operating instructions and spare parts list (digital) - Paint finish anthracite (RAL 7016) Subject to technical modifications. The machine consists of two parts and must be assembled according to the assembly instructions. You will receive details of the exact delivery time in the order confirmation.

Condition: new, Year of construction: 2025, The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone. The universally applicable MEBAbase 25 G mitre bandsaw is ergonomically sophisticated and has an optimum price-performance ratio. Simple centralised operation. Technical data: Cutting range 90° - 255 - 265x200 or 200x200mm Csb Hljt Rv Iiewwmsrb 45° - 175 - 200x160mm 30° - 110 - 115x100mm Cutting speed 35 / 70m/min Drive - saw blade 2kW; 400V, 50Hz Saw blade tension electrically monitored Saw blade dimensions 2565 x 27 x 0.9mm Weight 265 KG Dimensions 1180 x 1500 x 1750mm Basic equipment of the MEBAbase 25 G - MEBA mitre system: Large, swivelling table prevents sawing into the material support surface - low wear costs! The material is always clamped at right angles close to the saw blade. - Fast mitre adjustment from 90° - 45°, infinitely variable according to scale to 0.5° accuracy - The mitre pivot point is the intersection point between the saw blade and the material system, which is why there is no change in the length dimension when the angle position changes - Manual quick material clamping. - Material stop with scale up to 500 mm - Complete coolant system - Saw blade tension electrically monitored - 1 saw blade on the machine 6/10 ZpZ - Saw blade drive with limit stop - Operating instructions and spare parts list (digital) - Paint finish anthracite (RAL 7016) Subject to technical modifications. The machine consists of two parts and must be assembled according to the assembly instructions. You will receive details of the exact delivery time in the order confirmation.

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. Positive stops at 30° + 45° left and right hand Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder Environmentally-friendly micro spray lubrication system Chip box inside Saw blade drive with end of cut stop Precise saw blade carbide-roller guidance Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment Hydraulic lift up of saw frame Model Manual Crobebi S Dis Hlwwmjb Miter 30° left Ø 130mm; square 120x120mm 45° left Ø 200mm; square 180x180mm 90° Ø 260mm; square 300x260mm 45° right Ø 200mm; square 180x180mm 30° right Ø 130mm; square 120x120mm Motor:[kW] 1,8 Saw blade: [mm]3350x27x0,9 Speed: 35/75 m/min Working heigt:[mm] 900

Condition: new, Year of construction: 2025, Space saving high-tec MEBApro 260 AP Standard equipment 2-column-linear guided saw frame Feed by adjustable frequency controlled lead screw drive with automatic pressure regulation for best cutting performance and saw blade life Steplessly variable saw blade speed with powerful, frequency regulated drive Cjb Hebv Nk Eslwwmsrb Central and easy to use control panel Adjustable saw frame height by sensor system Combined precise saw blade carbide-roller guidance with saw blade brush Inclination of saw blade to vice bed approx. 2° Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment NC-controlled, automatic infeed with hydraulic material full-stroke clamping Simple operating by NC-control with clear text message display by SPS control Material infeed without re-clamping of material at short sections Stable, linear guided infeed gripper with servo positioning for highest accuracy Automatic adjustment of saw blade guidance to material width Driven saw blade cleaning brush

Condition: new, Year of construction: 2025, type: straight cutting bandsaw 90° sawing process: automatic automation: serial-cut max. cutting capacity Ø: 330 mm max. cutting capacity width: 350 mm max. cutting capacity height: 330 mm Crjbsdr Sabj Hlwwmsb Highlights: • Fully enclosed high performance bandsawing machine for safe, clean, and quiet operation • Compact and practical construction: space saving, easy to access during machine commissioning, saw blade change (large doors) and maintenance activities (inspection openings) • Carbide compatible power-package: sawing of solid material, tubes, and profiles. Trouble free cutting of hardened material while saving blade life • Maximum, reliable productivity for continious runs in single- and multi-shift operation • Secure transport of material by closed roller table. Increased, hardened tensioning elements and a high clamping force guarantee an efficient transport of materials. The result: product quality • Dynamics and power: saw feed and material feed by ball lead screw with servo-motor for accurate cuts, without compromises • Precision and reliability: use of latest linear ball guideways to provide solid smooth running • Minimum length of remaining piece by innovative vice system

Condition: new, Year of construction: 2025, Product information for metal bandsaw type: straight cutting bandsaw 90° sawing process: automatic automation: serial-cut max. cutting capacity Ø: 300 mm max. cutting capacity width: 300 mm max. cutting capacity: height: 300 mm Technical data: Motor [kW]: 3 Saw blade [mm]: 4900 x 34 x 1,1 Dimensions [mm] (length x width x height): 2500 x 1650 x 1800 Weight [kg]: 2500 Material weight: max. 250 kg/m Highlights: Machine cover: secure and compact Saw blade guiding: accurate and reliable Crjbedr Sbks Hlwwmjb Saw frame speed: powerful and dynamic Vice system: innovative and smooth Operation and control: intelligent and ergonomic

Condition: new, Year of construction: 2025, MEBAeco Ready-made individuality Central and easy to use control panel Movable blade guide arm, adjustable to suit material width Combined precise saw blade carbide-roller guidance Saw blade tension by torque wrench Coolant equipment can be combined with MEBA Crjbobzll Hs Hlwwmjb micro-coolant system MEBA power package Lifting and lowering of the saw frame with a frequency regulated lead screw drive, with automatic cutting pressure and feed regulator. Rapid lowering of the saw frame via button until material edge Powerful, frequency-controlled saw blade drive Hydraulic material full-stroke clamping Minimum speed- and saw blade control on the bandwheel Ergonomic panel based on „Windows CE“ system software Stepless height adjustment by height sensing Automatic material feed: Compact design for short sections and flexible infeed shuttle system for almost any length available Electric mitre swivelling by servo motor