Condition: used, Camam US/1C Chair Equalizer Deb Heuwqwtoc I A Tskl

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, Manufacturer: Biesse Model: Selco EB 70 L Year: 2003 Type: Panel saw Technical characteristics Max. blade projection from work surface (cutting height): 70 mm Dob Hcov Tldcs I A Tskl Main blade max. diameter 300 mm, motor 7.5 kW Scoring blade max. diameter 200 mm, motor 2.2 kW Automatic lateral alignment device 3 air-cushion unloading tables with rounded profile 6 pneumatic clamps Windows PC-based control Remote-controlled Start cycle pusher, including emergency pusher Power and Motors Voltage: 400 V Pluging: Three-phased Air supply: 7 bar

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, BIESSE 450 SELCO SK4 Year of Manufacture: 2016 Dksb Hsr Elzyoc I A Tsl Technical Specifications: - Net weight: 4,220 kg - Working area: 3.8 x 3.2 m - Max. saw projection: 75 mm Equipment: - Main body with installed components: - Carriage for main and scoring saws with Quick Change system - Saws powered by electric motors: - Main saw motor: 7.5 kW - Scoring saw motor: 2.2 kW - Pressure beam - 3 pneumatic support tables - Feeding table with pusher carriage for panel positioning and roller modules to reduce sliding resistance - Fan unit - Dust extraction unit - PC control unit with keyboard and monitor - Max. cutting length: 3,800 mm - Max. pusher stroke: 3,200 mm - Max. saw projection: 75 mm - Power supply: Three-phase, max. power 15 kW at operating voltage 380 V / 50 Hz Installation and commissioning of the machine are available for an additional fee.

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, cutting height (max.): 100 mm, worktable length: 7,000 mm, TECHNICAL PARAMETERS maximum cutting width 300mm maximum cutting height 100mm maximum element length 6m automatic material pusher cutting out defects with fluorescent pencil Dkob Hc I Aov Td R Us Tsl length of the feeding table 7m length of the cutting unit 1m length of the receiving table 1.7m maximum disc diameter 500mm engine power 8.9kw year of production 2004 power supply 400v

Condition: ready for operation (used), Year of construction: 1976, Functionality: unexamined, saw blade diameter: 500 mm, cutting height (max.): 150 mm, saw drive: 5,500 W, Pneumatic saw feed Dsb Hov Tcu Ejc I A Tekl with roller table

Condition: new, Year of construction: 2024, operating hours: 1 h, Functionality: fully functional, machine/vehicle number: WW475M/2024, type of input current: three-phase, table length: 6,000 mm, cutting length (max.): 4,800 mm, height adjustment type: electric, saw blade length: 4,000 mm, In the WW475M model, we have used excellent ergonomics combined with a solid and durable construction. The machine is prepared for long and trouble-free operation thanks to high-class components. The WW475M sawmill is a modern sawmill that is supposed to work for many years. Thanks to the appropriate support of the wheels and rollers, we gain rigidity and no wavering of the saw. Reinforced thickness of the structure as standard. Presentation on YouTube: WW475M WoodWorm Band Sawmill Technical data: - Main engine power: 7.5 kW - 475mm guide wheels - Double-sided support of the wheels thanks to which the saw does not wave / better distribution of forces. - Manual roller - Supported from above to increase cutting stability. - Vertical head feed up / down - electric Deb Hcov Tcdte I A Tjkl - Horizontal head feed - electric on the inverter (speed adjustment possible) - Start using a star - delta automatic - Hydraulic saw tensioning (pressure gauge + additional valve) - "Quick Return" head function - PK multi-groove belt - Electronics on LG / LS components - Adjustable control panel - Horizontal / vertical limit switches - 10 meters of power cable included Frame: - Bed made of 120x80x5mm profile - reinforced - Track length 6000mm - Width 1200mm, between beams 1004mm - 5 angular stops (adjustment of the mounting location) - 2 log clamps (possibility of any arrangement) - Height-adjustable legs Cutting dimensions: - Max. log diameter 740 mm - spacing between saw guide rollers 760 mm) -Max. log diameter 1000 mm - when rotating -Standard log length 4800 mm -Gauge between head frame and saw 280 mm Blade: -blade width - 32-35 mm -blade length - 4001 mm-standard Optional equipment: -ISP electronic cutting length meter (several models to choose from) -Any extension of the log length being processed -Supporting roller with electric feed -Mobile version -Debarker -Receiving tables and ramps -Sharpener and Spreader Machine Made in accordance with CE Safety standards and with care for sensitive machine elements. The machine is covered by WoodWorm technical support and Warranty Possibility of transport worldwide.

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Dkjb Hcov S Uz Io I A Tel Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: excellent (used), Year of construction: 2001, Sliding Table Saw Manufacturer: SCM Type: SI 450 E Year of Manufacture: 2001 Deb Hc I Aov S Uvls Tskl Carriage Length: 3,200 mm Cutting Width: 1,340 mm Cutting Height: approx. 150 mm Cutting Height at 45°: 106 mm Motor Power: 7.5 kW Max. Saw Blade Diameter: 450 mm Speeds: 2,350 - 5,200 rpm Speed Adjustment: Variable - Continuous Height Adjustment: Electric Angle Adjustment: Electric Scoring Device: No Motor Brake: Yes

Condition: used, Year of construction: 1999, Horizontal panel saw SCM Sigma 90, year 1999 for sale! Dismantled Cutting length 4500 mm Cutting height 90 mm Type horizontal Blade diameter 350 mm Engine power 11 kW Dksb Hcov S Um Ro I A Tol Scoring unit Yes Weight ~3040 kg CE marked

Condition: used, Multi-blade circular saw Waco Lamell 90 for sawing, trimming, ripping or grooving boards with new feed chain. Dkeb Hspiarcsc I A Tjl Cutting height max. approx.: 100 mm chain width: 300 mm Clamping length approx.: 300 mm clamping length approx.: 300 mm Chain: New Function: Lowered chain in the cutting area function: Lowered chain in the cutting area engine: 45 kW

Condition: used, Functionality: unexamined, saw blade diameter: 500 mm, cutting height (max.): 160 mm, cutting width (max.): 430 mm, rotational speed (max.): 2,800 rpm, Two-hand control Roller table Dsb Hc I Ajv Tcmuj Tokl Automatic safety and hold-down device

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout Dksb Hc I Aov S Hy As Tjl up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, 1 complete automatic trimming system Paul 1 used Paul AB920 automatic feeding system consisting of: Transfer table with 1.1 m stroke; 6 m roller table; 9-strand conveyor chain drive Measuring device with 16 measuring points via measuring skids • NCD control and control cabinet • Control of the automatic feeding system and the BK/1000 with a saw blade adjustment Selectable: sharp edge / low wane / high wane - alignment centered or along the rear wane • Trimming grid: 48, 60, 80, 100, 120, 140 mm; • 150-400 mm in 1 cm increments • Single-track trimming with manual input of the trimming width 1 used Double Edger BK/1000L Max. cutting height: 125 mm • Feed with dual gear motor • Divided top roller • Hydraulic sawblade adjustment • Motor: 22 kW, 380 V, 50 Hz, 2900 rpm • Motor clamping rails • Fixed riving knife • Splinter separator 865 mm / 6.30 m long with fixed cutting blade and rising tooth chain for max. log length: 5.50 m • Total connected load of the system: 35 kW Dkjboulikms Hc I A Tel Saw shaft with new bearings

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: C350, cutting gripper Dobev Icp Se Hc I A Tskl

Condition: used, Engine power: 9.5 PS/HP (7.0 kW), year of manufacture: 2018, cutting height (mm): 136 mm, circular saw pivoting: 0 46 degrees, circular saw blade Ø max.: 400 mm, scoring saw Ø: 160 mm, sliding carriage 3200 mm, motorized parallel stop, control panel at eye level, digital display on ruler, Compex length compensation Dsb Hc I Asvwl Ams Tjkl

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm Dkebetxkpre Hc I A Tol -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: excellent (used), Year of construction: 1997, For sale is an Altendorf sliding table saw in very good condition. The saw can be inspected and tested on site. About the machine: - Sliding table 2800mm - Parallel stop 1050mm - Boom up to 3250mm - Height and tilt adjustment via foot pedal - Electronic tilt display - Year of manufacture 1997 - Max. 450mm saw blade - Scoring unit: no - Motor power 5.5kW Accessories: Miter gauge, 2nd saw guard, supports, tools, spare parts. Dkeb Hc Iov Syb Hs A Tsl You will receive a VAT invoice.

Condition: good (used), 11kW motor Fully operational Dsbjr A Aqle Hc I A Tskl

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 11100 € Dsb Hc I Asvvniao Tokl 227.55 € Schwenkrahmen 3660x27x0,9 mm 20-100 m/min 320 mm 300 mm 320x300 mm 640 mm 0.37 kW 2.2 kW 0.12 kW 1900 mm 850 mm 1300 mm 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: ready for operation (used), operating hours: 2,500 h, total length: 12,000 mm, net weight: 3,500 kg, Hello, I am selling a Lignuma band saw, cutting length 9.5 m, good condition, the saw includes a sharpener and additional saws. The machine is ready to work. Debjv Svhcj Hc I A Tekl

Year of construction: 2002, Condition: ready for operation (used), A vertical panel saw GMC including a small and mobile extraction unit Kemper is available. Cutting dimensions X/Y/Z: 4200mm/2100mm/50mm, max. horizontal cutting height: 1950mm, saw blade outer diameter min./max.: 240/250mm, saw blade inner diameter: 20mm, saw blade speed: 5200rpm, motor power: 3kW, weight: approx. 500kg. Extraction unit Kemper 64100, year of manufacture: 2009, volume flow: 1200m³/h, weight: approx. 80kg. Documentation available. On-site inspection is possible. Dksbev Sufms Hc I A Tjl

Condition: good (used), Year of construction: 2016, Casolin Astra 400 Sliding Table Saw 320cm carriage motorically adjustable blade tilt and top/bottom motorically adjustable blade on the right side up to 1300mm 2-axis scoring saw, electrically adjustable 120mm scoring saw 7.5KW engine, 3 cutting speeds max. 400mm blades Dob Hceu Ekhne I A Tokl angle-bent carriage with angle display used machine, good condition, holds angles and fulfills its functions

Condition: good (used), - power supply - 230 V - motor power - 0,92 kW, 1,25 HP - rotational speed - 2850 rpm - blade diameter - 250 mm - disc bore diameter - 30 mm - shield for the disc - cutting height - approx. 70 mm - cutting width - approx. 440 mm Dksb Hc I Asr A Anqo Tol - arm length - approx. 660 mm - arm angle adjustment +/- 90° - blade angle adjustment 0°-90° - arm height adjustment - blade adjustment in vertical axis +/- 90° NO DISCS FOR DISCS

Condition: good (used), Felder format saw with carriage scoring saw with separate engine, carriage length 320cm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable with readout culaga on the right side manually adjustable up to 1270mm main engine 5.5KW 3 cutting speeds max disc 350mm scoring saw diameter 120mm, hole 20mm Branded machine, technically fully functional, will still fulfill its functions well Dkeb Hc I Ajv Srq He Tol

Condition: good (used), wheels diameter 800mm Dkjb Hc Ier A Anio A Tsl dimensions of table top 1100x800mm worktop adjustable at an angle motor 3kW max cutting height 420mm overhang of the belt - body 750mm