Condition: not inspected (used), Year of construction: 1990, Edger carriage travel: 3400 mm Saw blade pivots 45° Cutting height at 90°: 110 mm Fobev U Nple E Hrazjgb Motor: 4 kW Weight: approx. 960 kg

Year of construction: 1994, Condition: excellent (used), THECHNICAL DATA : LENGTH OF THE WORKING ARM : 1600 MM MAX. CUTTING THICKNESS with blade 130 mm : 45 mm MAX. CUTTING THICKNESS with blade 160 mm : 70 mm Feb Eor Hmtks Hrazegb MOTOR POWER : 0,75 W - VOLT 380 / 50 HZ NEON LAMP VOLT 220 BLOWING DEVICE TO CLEAN THE WORKING AREA ELECTRONIC 220 VOLT WORKING TABLE : 1000 X 2000 MM DIMENSIONS : 2400 X 1000 X 1700 MM WEIGHT : 230 KG

Condition: new, Year of construction: 2025, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical details: Feb E Hreh Nu Iusazsgb Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° Saw blade Ø 520 mm Weight 310 kg Scope of delivery: ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Operating tool and hand crank

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly Fgjb Eocbq Nws Hrazjb -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: good (used), Complete feed of gang saw Esterer HDN 600 was recently removed due to conversion to frequency-controlled feed. Fjb E Hsr Hmhnerazogb immediately available Location: Austria, near Wels

Condition: used, Year of construction: 2023, machine/vehicle number: 23-08-14-008, Neue Ausstellungsmaschine! Listenpreis 64.270€ netto Grundausstattung: Handguard: M18178 -ElmoDrive-Steuerung -VARIO Motor 5 kW (6,8 PS) (beidseitige Schwenkung) -Winkel-Gehrungsanschlag DIGIT LD Ablängen bis 3.200 mm -CNC-Parallelanschlag 1000 mm -Ein-/Aus-Schalter am Doppelrollwagen -Vorlagenhalter inkl. Optionen.: -Wegschwenkbarer Kameraarm M44155 -Vorbereitung für 2-Achs-Vorritzsystem M24038 -Doppelrollwagen 3.200 mm M34204 -Vordere Auflagerolle M44450 HAND GUARD Das weltweit erste und einzige KI- und kamerabasierte Sicherheitsassistenzsystem für Formatkreissägen ElmoDrive-Steuerung In der F 45 ElmoDrive steckt die modernste und umfassendste Steuerungstechnik für Formatkreissägen. In Augenhöhe angebracht, vereint sie höchsten Bedienkomfort und Übersichtlichkeit mit praxisnaher und ergonomischer Anwendung. 12 Touchscreen Über diesen Screen rufen Sie alle Funktionen auf. Im unteren Teil des Bildschirms können regelmäßig benötigte Funktionen abgelegt werden (Desktop-Funktion) CNC-Parallelanschlag Steuerbar mit einer Verfahrgeschwindigkeit von 250 mm/Sek. und mit einer Positioniergenauigkeit von +/- 1/10 mm. Das fünffach gelagerte, hochpräzise Kugelumlaufspindelsystem ist wartungsarm und genauso wie der Motor gut geschützt in das Aluprofil integriert. Der Anschlag erkennt automatisch seine Position, insbesondere im Gefahrenbereich des Sägeblatts. -Vordere Auflagerolle Mit einer Breite von 300 mm ist sie beim Schneiden langer Werkstücke am Parallelanschlag eine hilfreiche Unterstützung. Sie kann mit einem Handgriff um 90° unter den Doppelrollwagen (Mindestlänge 3000 mm) positioniert werden. -Vorlagenhalter Praktisch ist der Vorlagenhalter direkt an der Steuerung in Augenhöhe. Die Stücklisten werden durch eine Klemmung fixiert, so haben Sie Ihre Aufträge permanent im Blick. Mit der integrierten Stiftablage haben Sie Ihr Schreibwerkzeug immer griffbereit. Fgob E Hjqylftsrazsb

Condition: good (used), Year of construction: 2011, cutting length (max.): 3,100 mm, saw blade diameter: 160 mm, cutting depth: 45 mm, overall weight: 17 kg, power: 1.49 kW (2.03 HP), Self-propelled, mobile panel saw Fjb E Heuw Sbmsrazjgb Processing and cutting panel materials

Condition: excellent (used), Year of construction: 2007, I sell the format sliding table saw with scoring Manufacutrer: OTTO MARTIN Model: T60 Classic Year 2007 Cutting length 3200mm. Cutting width 1250mm (optional) Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-46° digital Fsb E Hrjtmwn Heazjgb Saw blade and scoring height adjustment digital Digital display for parallel fence and working height. Turn on the main saw blade and scoring unit from control panel Main motor format sliding table saw 5,5KW (7,5 HP) (4000/4800/6000 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately. Including full documentation and CE Certificate.

Condition: good (used), Double miter saw for cutting and drilling frames or mullions Fgjb E Hrajh Rruaezjb Electronic opening

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 150 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC UKS 450 under-table cross-cut saw Cross cuts: 40x440 - 100x340mm - 160x120mm Max. cutting height: 170mm Saw blade: 550mm Working height: 850mm Bottom and top extraction sockets: 160mm Fgsb Ejrfudno Hrazjb - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: good (used), Saw blade Ø 500 mm, cutting height approx. 160 mm, cutting width approx. 550 mm, saw motor 3 kW, upper saw section swivelling for bevel cuts with locking mechanism, cutting depth adjustment via spindle ratchet, with new 500 mm Ø CV saw blade Fgjb E Hjvl E Nijrazjb

Condition: used, machine/vehicle number: 199710, max. Schnittlänge : 3000 mm max. Schnitthöhe : 45 mm Sägeblattdurchmesser : 160 mm Spannbalkenbewegung : per Handrad Bewegung Sägewagen : manuell Maschinentyp : fahrbar Fgjb E Hrajv U Hahozsb Motorleistung : 1,8 kW

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Raimann Multi-Blade Saw K47 Year of manufacture 1990 S/N 24745 Machine No. 94800 Manufacturer Interholz Raimann GmbH Technical specifications: Conveyor chain width 430 mm Shaft width 650 mm Maximum cutting height 120 mm Saw blade diameter 350 mm Spindle diameter 60 mm Sleeve diameter 80 mm Minimum length 69 cm 37 kW main motor Shaft speed 3000 rpm Feed motor 5.5 kW Infinitely adjustable from 0 to 50 m/min Feed speed adjustable via inverter Centralized lubrication system Automatic spindle height adjustment Automatic roller height adjustment Upper take-off rollers Pneumatic tension rollers Centralized lubrication system Overall machine dimensions: Length 330 cm Width 225 cm Height 220 cm Fjb Eov Rc Tvj Hrazsgb Weight 7000 kg

Condition: not inspected (used), Year of construction: 1979, Functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Parallelogram guard with narrow cover Cross table with stop Rip stop Fsb E Hsv Uqa Esrazjgb Scoring unit WITHOUT miter stop

Condition: good (used), Beam saw for cutting material into finished cut bar with electronic displacement guide Fgjb E Hep Ecc Uerazsb

Condition: used, PAUL Type AO 15 hydraulic under-table cross-cut saw for precise and fast cross-cuts in woodworking. The robust construction and powerful saw unit enable precise cuts with high repeatability. Ideal for sawmills, wood processing, and series production. Saw blade diameter: 500 mm cutting width: max. approx. 600 mm Clearance height: Max. 160 mm Fgob Ejv Rdqie Hrazob roller conveyor: 2,450 mm each

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Fgsb E Hoh Anyfsrazsb

Condition: excellent (used), Technical data: Track width: 300 mm Max cutting height: 110 mm Max saw diameter: 300 mm Smooth feed adjustment Automatic lubrication system Anti-kickback protection Culaga Extraction port: 190 mm Safety switch Power supply: 380 V Overall dimensions: Length: 2300 mm Width: 1300 mm Fob E Hrajv Unhtezjgb Height: 1400 mm

Condition: new, Year of construction: 2025, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity Fgjb E Hrajmb U T Hezsb • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, Year of construction: 2025, - Saw unit 2.2 kW (3 HP) Fsbo Azdio E Hrazogb - Milling unit 1,1 kW - Sawing length 3700 mm - Double high-grade LM-linear guides - Mechanic axial saw blade adjustment 0 – 2 mm infinitely variable - Power supply in cable duct with plastic link track - Cutting height 45 mm - Safety equipment

Condition: excellent (used), for edger ESTERER DKL, DKB, DKE Spacer rings in various widths, bore 85 mm, fixed saw bush with right-hand thread Total length 160 mm, CV circular saw blades hard-chrome plated 300 Ø x 85 Ø Fgob E Hoh Anxdsrazob

Condition: new, Year of construction: 2025, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. Fgeb E Hrjmcaahjazjb • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Fsb E Homb U T Rjrazjgb Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy Fgob E Homcaawjrazob • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture Fob Eemb U T Ue Hrazjgb • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales