Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. Dcsb E S Domrxznjnieg In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: used, Year of construction: 1998, No. 04395 Dob E S Dner U Ay Asiecg Sliding table saw Panhans 690 B Used, year of construction 1998 Sliding table length 3200 mm Double carriage with hardened steel guides Cutting length 3200 mm Cutting width 1300 mm Cutting height 145 mm Saw blade diameter max. 450 mm Saw blade quick clamping system APA Cross table with telescopic length stop up to 3200 mm Panhans Super-Gehrfix with auxiliary mitre fence Saw motor 5.5 kW Speeds 3000 - 4000 - 5000 - 6000 rpm Hydraulic height adjustment Hydraulic cutting angle adjustment Digital display cutting angle Digital display speed (defective) Transport dimensions approx. 3500 x 2000 x 1800 mm LWH Weight 1100 kg To avoid possible misunderstandings, an inspection on site is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2000, Cutting length: 4.200 mm Pusher stroke: 4.200 mm Number of grippers: 6 Saw blade projection: 105 mm Saw blade diameter max: 355 mm Main motor power: 9 kW Djb E Sowby Tyo Dniecg Scoring saw: Yes Stop side: Left Conformity marking: CE mark Total connection: 14 kW

Condition: new, Year of construction: 2025, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Dsb Esu Rqq He S Dniscg Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: excellent (used), Year of construction: 1996, I sell the complete saw mill angular saw. Manufacturer: WEP Gamota, Slovakia Model angular saw: UP1000 Dsb E S Dnjwdn Ukjijcg Year 1996. Cutting length up to 13,00m. Carriage suitable for lengths 2,00 up to 14,00m Wood diameter 1000mm. Saw blades 550mm Motors 15 + 18,5 KW Very good condition. Available immediately.

Condition: good (used), Feed speed 10-80 m/min Dcobswdn Tgs E S Dniog Saw wheel diameter 1050 mm Bandsaw width 130mm Saw motor power 2 x 37 kW Hydraulic feed with centering. Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cutting PLC control with 2-line display and plain text display for processing mode and error diagnosis infinitely variable feed rate up to 24 m/min automatic workpiece end detection Calculator function in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm max. trimming height 2100 mm Dob E Seu Dru Tj Dniocg max. scoring height, vertical 2100 mm max. cutting depth 80 mm Motor 5.5 kW Saw blade speed 4500 rpm Saw blade diameter 300 mm Air requirement 1200 m³/h Air speed 20 m/s static negative pressure 1200 Pa Extraction connection: 2 x 120 mm Dimensions L x W x H 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height 2990 mm Compressed air connection: 6 bar Air consumption 50 NL/min Electrical connection value: 5.7 kW With Supercut scoring device With pneumatically pivoting saw unit With longitudinal stop for lower workpiece support With folding rail, short, complete Availability: by arrangement Location: Solingen

Condition: used, Year of construction: 2023, gebraucht 2023 6240 prompt, Zwischenverkauf v Italien 16400 € 1 Schwenkrahmen 3010x27x0,9 mm 20-100 m/min 260 mm 240 mm 330x120 mm rund 200 mm, quadrat 190 rund 120 mm, quadrat 115 220 mm 835 mm 1.5 kW 2800 mm 2050 mm 1900 mm 1090 kg demo machine / mint condition net price (price for new machine € 20.490,00) material feed andnumber of pieces by CNC (99 programms) automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 600 mm/stroke variable cutting pressure variable cutting speed coolant equipment automatic saw blade breakage detection hydraulic vices for material clamping while cutting and for feeder unit user manual in GERMAN or ENGLISH Dsb E S Dsvrkz Reniscg OPTIONS: Roller tables and band saw blades on request

Condition: used, Year of construction: 1996, Cutting height at 90°: 170 mm Cutting length: 410 mm Horizontal miter range: 45°-90°-25° Vertical miter range: -60° to +60° Digital display: Vertical and horizontal miter Roller conveyor / support table: No Saw blade diameter: 420 mm Speed: 2800 rpm Dcjb E S Dewbqkionieg Motor power: 3 kW Motor brake: Yes Feed brake: Yes Extraction connection: 100 mm Machine length: 1.20 m Machine width: 0.70 m Machine height: 1.50 m Weight: 110 kg

Condition: excellent (used), Functionality: fully functional, Engine power 2.2 KW Manual aggregate movement Disc diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Starting the cutting process with a pedal Dcob E S Dnswbpwhjiog Safety switch Width 900 mm, height 1500 mm

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 Dcsb Eeu Tqb Ue S Dnisg POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350

Condition: used, Year of construction: 2019, Sliding table saw with movable and adjustable saw unit class px 350i Technical specifications CLASS PX 350I - max. saw carriage travel [mm] 2600 3200 3800 - saw blade tilting 0 ÷ 46° - max. saw blade diameter (cutting) [mm] 50 - max. saw blade diameter (milling + cutting) [mm] 300 - max. cutting height (D350) from the table at 90°/45° [mm] 105/72 - max. cutting height (D300) from the table at 90°/45° [mm] 80/50 - saw blade speed [rpm] 4000 - cutting width rear stop [mm] 1300 Other technical specifications: - three-phase motor 5.5kW 50Hz - extractor hood diameter [mm] 120 (1) – 100 (1) - dimensions [mm] L 3859 W 3196 H 1368 L 4459 W 3196 H 1368 L 5059 W 3196 H 1368 STANDARD EQUIPMENT - Saw unit with grooving function, height adjustment via sliding shoe guide and tilt adjustment via lateral, high-strength rounded guides - Max. saw unit speed 40 m/min - Panel length detection system for optimizing the cutting cycle - Grooving depth adjustment system with numerical display - Control on adjustable control panel with "READY" Electronic control: 2-axis control with: * Motorized tilt adjustment of the saw unit * Rear stop position adjustment (reading of the stop position via magnetic tape) * Manual, semi-automatic and automatic mode with 99 storable work programs * Additional functions: calculator and operating hour meter * 3rd axis (height adjustment of the saw unit) optional - Extendable telescopic edge stop up to 2500 mm, which can be It is installed on a wide fixed table for panel support (600 mm x 1350 mm from the cutting line) complete with:* 2 stops and scale facing the operator* Extendable roller for workpiece support, 1900 mm total length.- Motorized and programmed rear guide positionable from 0 to 1300 mm- 2 fixed tables + 1 movable table- Additional emergency stop and work cycle start button positioned on the movable table. Advantageous when machining large workpieces that would otherwise obstruct easy and safe access to the machine's main control panel. class px 350i CE version - 3200 1 pc. Sliding table saw with movable and adjustable saw blade in compliance with European safety regulations - Saw carriage travel 3200 mm Design in accordance with safety regulations 1 pc. Volt 400 EU 1 pc. Extendable telescopic edger stop up to 3200 mm with digital readout, which is installed on a wide fixed table 1 pc. Extendable telescopic edger stop up to 3200 mm with digital readout, which is installed on a wide fixed table for panel support (600 mm x 1350 mm from the cutting line) complete with - 2 stops with independent electronic digital readout with magnetic strip detection system and LCD display - extendable roller for the workpiece support, 1900 mm total length Miter device with compensation and digital readout of the stop position 1 pc. Complete with: - Telescopic stop with stop flaps for cutting dimensions up to 1500 mm - Table for quick angle adjustment - 1 digital readout Parallel cut device with digital readout 1 Complete with: - 1 stop for cutting dimensions up to 1000 mm - 1 digital display - Larger rear table with double motorized stop - Stop adjustment from 0 to 1300 mm - Support table length 2000 mm - Three-phase motor 7 kW 50 Hz (7 kW 60 Hz) - 1 piece - Pallet 1 piece Storage location: Garbsen Dceb Esvztivo S Dnijg

Condition: used, Year of construction: 2007, HOLZ-HER 6310 CUT 110 580 Computer controlled panel sizing saw Watch the video about the machine: Year of manufacture: 2007 Machine number: 136 Machine has been overhauled in all essential mechanical elements new PC, new label printer etc. in 2023. Technical data and description: Basic machine pressure beam saw execution: fence on the right side sawing cycle: from the fence cutting length: 5850 mm cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) HM scoring circular saw blade Ø 180 x 4,4/5,4 x 30 mm conical (not included!) Cutting height cutting height: 110 mm blade protrusion: 120 mm pressure bar pneumatic, pressure bar pressure adjustable Suction Central, moving dust channel at the aggregate Suction connection basic machine: 1x Ø 160 mm, placement right machine side Dust channel in pressure beam 2x Ø 120 mm - 1x top left, 1x top right for SL 5850 mm: 3x Ø 120 mm - 1x top left, 1x top center, 1x top right Air speed suction: 30 m/s Air volume: 4000 m3/h at 30 m/s Compressed air Compressed air requirement approx. 32 l/min at 6 bar per cutting cycle Switchable collet pressure Switchable from control panel For sensitive panel materials Automatic cutting length limitation The sawing unit detects the end of the workpiece by means of a guideless optical system and optimizes the sawing cycle. Residual cutting device For cuttings without residual dimension Collets retract into recessed pressure beam Width stop Precision-guided, freely programmable width stop with collets Rack and pinion drive for precise positioning With surface-guided linear guides Return speed of the knife gate: 80 m/min Feed speed knife gate valve: 80 m/min (EU - feed speed max. permissible 25 m/min) Opening dimension for collets max. 120 mm for length and cross cutting clamp, floating design compensates tensions within the panel packs upwards - 6 pcs. at 3250 mm cutting length - 7 pcs. at 4250 mm cutting length - 8 pcs. at 5850 mm cutting length Control CUTCONTROL 2 with 15" TFT display Operating system Windows 2000 RJ45 network connection 10/100 Base-T Fast Ethernet Intel Celeron processor Midi Tower US keyboard Optical mouse CD ROM drive Control panel Control on the touch side Clearly arranged operator interface on graphical basis for easy operation and management of orders and material on Windows basis Real time display Large and clearly arranged buttons All functions are accessible from one level No limits in the input fields and unlimited input of orders are possible Control functions Direct cut: Cutting by direct input of cutting dimensions. Processing of absolute, serial or format cuts, with integrated grooves, recesses or position cuts. Infinite number of jobs programmable. Priority assignment of individual jobs (priority assignment is possible at any time). Job programming, parallel to cutting. Dceb Eonbiphj S Dnisg NC cutting: Processing of optimized orders. Graphical overview of the machine with machine sequence function, as well as

Condition: used, Year of construction: 2003, Functionality: fully functional, Saw blade diameter 500 mm Saw blade motor power 4.0 kW ATTENTION: No motor brake Roller conveyors: 1 m to the left of the saw blade 2 m to the right of the saw blade Dsb E Souglvto Dniscg Roller diameter 60 mm Usable width approx. 590 mm 2 manually adjustable folding stops Scale rubbed off and difficult to read Emergency stop switch in the operating area Working height approx. 760 mm Connected loads: 400 V 3Ph, 50 Hz Suction connection diameter: 100 mm Optional: Renewal of the dimension scale

Condition: new, Year of construction: 2025, Cutting height at 90°: 125 mm Cutting height at 45°: 80mm Cutting length at 20mm cutting height: 545 mm Cutting length at 125mm cutting height: 450mm Miter range horizontal: 0 - 45° Miter range vertical: -45° to +45° Roller conveyor / support table: no Saw blade diameter: 400 mm Speed: 2800 rpm Motor power: 3 kW Djb Eogzlpre S Dniecg Motor brake: yes Extraction connection: 60mm Table size: 1540mm x 1025mm Machine length: Machine width: Weight: 180kg

Condition: as good as new (ex-display), Year of construction: 2025, Panhans band saw BSB 500 upper and lower APA II bandsaw guiding system swivelling table top up to 45 Deb E Ssdq D I Ho Dnijcg door safety by limit switch wheel diameter 500 mm drive motor 1,5 kW / 2,0 PS motor 400 Volt with motor brake belt speed 1.290 m/min. cutting height max. 320 mm cutting width max. 485 mm blade length max. 4.145 mm table size 500x680 mm table height 890 mm Suction nozzle 2x100mm space requirement: 900x525x1925 mm Weight 220 kg CE-conform, GS-tested ex stock 54634 Bitburg

Condition: new, Year of construction: 2024, Functionality: fully functional, - New machine offer - Pneumatic saw blade feed Motor power 7.5 KW Cross section max. 280 x 135 mm, or 360 x 55 mm Dobeu Nykte E S Dniocg complete with: * 1 mtr. work table to the left and right of the saw blade * beveled plate behind saw cut for removal of trimming cuts trimming cuts * 2-hand operating device * Front saw blade guard * Carbide saw blade diam. 500 mm * Fixed front guard (no protective grid) Further options on request

Condition: used, Year of construction: 1993, sliding table length: 3200 mm cutting width at the fence: 1250 mm cutting width at the cross cut: 2800 mm cutting depth: 145 mm scoring unit: ja height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch adjustment fence: manuell readout sawblade tilting: Digital read out sawblade height: - read out fence: Scala read out crosscut stop: Scala sawblade diameter: 450mm number of speeds: 4 motor power: 5,5kW Djb E S Dowbqi Ejniocg motor brake: ja - automatisch suction connection: 80mm und 120mm machine length: 3000mm machine width: 2200mm weight: 1000kg

Condition: new, Year of construction: 2024, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - Dsb E S Dnjcnz Rvoiocg On request we can also offer you the saw blade.

Condition: new, Year of construction: 2024, Functionality: fully functional, NEW MACHINE - READY FOR DEMONSTRATION IN STOCK Aluminum arm Unit runs on linear guide rails Constant zero point even when the cutting angle is changed Automatic pneumatic opening of the saw blade guard Return spring for return of the saw unit in idle position Support table equipped with exchangeable MDF sacrificial plate Complete operation of the machine from the front Motor 400/3/50 PS.5,5 (kW 4) Total weight 320 kg Dobju Rafas E S Dniocg Machine complete with: with: Carbide saw blade Ø 500 mm F=30 Motor speed 2800 rpm Horizontal tilting +60 / 0° /-45° Vertical tilting 0° +45° Horizontal tilting pneumatically locked Dust extraction nozzle 150 mm Cutting width with horizontal swivel: at 90°: 600 mm. at 60° rotation: 300 mm. at 45° rotation: 420 mm. Cutting height with vertical swivel at 0°: 175 mm. at 15°: 130 mm. at 45° - bevel: 100 mm. Further options on request

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Dcob E S Dsizkhvenijg miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS band saw Type BSB 600 Stand in modern steel construction, table top thick-walled, high ribbed cast iron massive grey cast iron band saw frames technology: Djb E S Djbzmb Honijcg - upper and lower PANHANS band saw blade guide APA II - finely planed cast iron table - swivelling table top up to 20 - dynamically balanced band saw blades with vulcanized rubber bandages - fence ruler can be used to the left of the saw blade - Fence profile can be folded down - blade tension indicator - mechanical height adjustment by hand wheel with locking pinion - automatic motor brake with main switch and motor protection switch technical data: - max. cutting height 380 mm - max. cutting width 570 mm - table size (BT) 590 x 810 mm - table height 905 mm - wheel-Ø 600 mm - engine power 2,2 kW - wheel speed 820 rpm - max. saw band length 4710 mm - suction nozzle-Ø 2 x 100 mm - machine weight 272 kg - machine size (LBH) 1120 x 750 x 2125 mm Location: ex stock Bitburg Top exhibition price Freely loaded

Condition: new, Year of construction: 2024, Functionality: fully functional, saw blade diameter: 600 mm, OPTIMIZATION CROSS-CUTTING SYSTEM WITH ROTATING SAWING UNIT CT600 / 6000 max. blank length 6,000 mm Cutting dimensions unit position A At 0° 200x215, 50x370 mm At 30° 200x185 mm, 50x325 mm At 45° 200x150 mm, 50x265 mm Dobov Aub Nj E S Dniecg At 80° 200x35 mm, 50x63 mm Cutting dimensions unit position B At 0° 160x315, 40x400 mm At 30° 160x270 mm, 40x350 mm At 45° 160x220 mm, 40x285 mm At 80° 160x52 mm, 40x70 mm Min. workpiece thickness 10 mm (with automatic feeding 20 mm) Support table inclined at 8° Slider stop side on the right Technical data saw unit: Aggregate completely rotatable with table Motor 7.5 KW, 400 Volt, 50 Hz HM saw blade diameter 600 mm, F=30, Z=60, S=5 Cutting cycle duration approx. 4 sec. Automatic rotation of the aggregate -70° to +70° Saw aggregate rotation -80° to +80° on request Rotation of the aggregate from 0° to 70° in approx. 1.3 sec. Positioning accuracy +/- 0.2° Hold-down system consisting of 2 pneumatic Pressure cylinders with mounted pressure rail Side pressure plate system with electronic control Technical data slider system: Feed via gear/rack system with "brushless" motor Positioning accuracy +/- 0.4 mm Power of the feed motor suitable for pushing a package weight of 80 kg Max. feed speed 90 m/min. Pneum. slider lift after completion of the cutting cycle and return above sliding level Control: 12 inch "touch screen" BECKHOFF professional PC with WINDOWS operating system USB port Ethernet port Loading and saving machine data via USB Editing cutting program directly on the input unit Transferring cutting lists via USB or Ethernet Direct import of .btl (10.4) format files Working software: Up to 1000 cutting lists with up to 11 different cutting dimensions or 1 list with 10000 different cutting dimensions. Cutting dimensions in sequence Cutting cycle with 4 optimization options (Max. length, min. waste, sequence, length priority) Graphic display of the workpiece Additional options installed: ZA110 discharge table (per meter) ZA040 saw unit table rotation 80°

Year of construction: 2022, Condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, Deb E S Dneihahmjiscg cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - - immediately available -

Condition: new, Year of construction: 2024, - NEW MACHINE OFFER - Cutting of fixed lengths according to cutting list and cutting out of defects Cutting cycle: Capping of imperfections by chalk marking Cutting with fixed lengths, Standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 lower infeed rollers 1 loading table 2 mt. Right with double marking table 1 pc. Outfeed table 1 mtr. with rear stop Height of rollers adjusted manually 12 pcs. luminescent chalk Cutting capacity: Pos. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming variants: - Defect caps through marking - Working with cutting list consists of 10 dimensions, repetition option for each dimension each dimension and total number of pieces for each dimension 100 memory locations for cutting lists Recognition system of the last two pieces to be cut and the following piece Electronic control of the sorting unit with no. 1 ejection kicker (ejection kicker optional) Technical features: Feed system motorized adjustment brushless and toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm. Carbide blade diameter 500 mm. Motor power 7.5 kW Cutting speed per minute up to N°100 Minimum bar length mm.550 Dcjb Esu Nhcqs S Dnijg Minimum bar width mm.40 min. Workpiece thickness 15 mm Further options on request