Condition: reconditioned (used), functionality: fully functional, Total length 3800 mm, two units, swivels 45° in both directions, cutting width 150 mm, extraction 2x 90 mm Ø – completely workshop overhauled. Fedpfox Ezycox Ad Iopi

Condition: new, Year of construction: 2024, machine/vehicle number: 2024/121/47, functionality: fully functional, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Fpsdpotwz Tlefx Ad Iji Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Fsdovi H Dijpfx Ad Ijpi Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: ready for operation (used), Connection voltage 380V Main motor 7.5kW Scoring unit 0.75kW Variable drive Double roller carriage 3000mm Electric height and tilt adjustment Cutting width 1000mm, CNC controlled Clamping system AKE Saw blade diameter max. 500 mm Control panel at eye level Swiveling front table Template holder 2-axis scoring unit Table extension 840mm Angle fence PQS Standard PSV with narrow and wide hood Fjdoy Hq N Ajpfx Ad Ijpi

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connection value: 380V, 1.85kW, 4.8A Length of pressure bar: 3100 mm Fpjdjh U Dbrspfx Ad Iji Pneumatic material clamping with manual lever valve Chassis Stop guide, 520 mm long 6x support brackets

Condition: reconditioned (used), Year of construction: 1987, machine/vehicle number: 1277/8-71, functionality: fully functional, Connected load: 380V, 7A Fodpfxoh U Sqro Ad Iepi Cutting length: 4300 mm Cutting height: 1925 mm Frame height: 2210 mm Machine height: 2500 mm Room height: 2540 mm Edge trimming height: 1870 mm Passage height: 1940 mm

Condition: reconditioned (used), Year of construction: 1982, machine/vehicle number: 270018, functionality: fully functional, Rated voltage 380V, 6.6A, 3kW Band saw blade length 5110 mm Fence Dust extraction port 100 mm Fjdpfjh Uxq Tex Ad Iepi Machine table, swiveling with handwheel Foot brake

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, - Stack length: 2500 mm - Stack width: 800 mm - Max. stack height: 1650 mm (with pit) - Max. payload: 4500 kg - Motor drive roller conveyor: 0.37 kW - Motor drive stop ruler: 0.37 kW - Motor drive electrohydraulics: 2.2 kW - Dimensions: 2500 x 1900 x 2600 mm Fodpfxew Ec Iuo Ad Iopi - Weight: 2600 kg

Condition: used, Used machine Fpjdpjzk N Ucsfx Ad Isi Equipment and technical data: High-performance multi-blade saw Heavy-duty cast iron construction Robust transport chain consisting of directly interconnected precision links Wear-resistant guide surfaces of the transport chain with an extremely low coefficient of friction Automatic chain lubrication 4-point saw spindle bearing for maximum stability Saw bush with conical seat and self-centering function 4 pressure rollers for precise cuts, even with thin workpieces 4 slitting and recoil finger rows Cutting height up to 110 mm with a 350 mm saw blade diameter Minimum cutting length 250 mm Clamping width of the saw bush 300 mm Minimum and maximum saw blade diameter 200/350 mm Saw spindle speed 4200 rpm Feed rate 4-48 m/min Transport chain width 300 mm Saw bush diameter (with 2 wedges 20 x 5 mm) 70 mm Work table height 750 mm Dust extraction connection diameter 200 mm Air volume at 25 m/s 3500 m³/h Motor 25 kW Feed motor 1.1 kW With laser guide light 1800 kg Sound emission 98.3 dB W (A) at idle speed without dust extraction During operation 107.1 dB W (A) Workplace-related emission level 81.8 dB W (A) at idle speed without dust extraction During operation 91.2 dB W (A) Availability: short-term Location: 63934 Röllbach Condition appropriate for its age

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: very well maintained Equipment and technical data: Saw unit can be tilted up to 45° 3 speeds: 3500/4500/5500 rpm Motor: 7.3 kW S6 Cutting length: 3200 mm Cutting width: 1250 mm Maximum cutting height: 133 mm Electric height adjustment X-Motion screen control with 5.7" monitor Controlled parallel fence Parallelogram guard, height-adjustable, can be swung out of the work area, saw blade diameter max. 400 mm Dust extraction connection: 80 mm Scoring unit: 1.1 kW, 8500 rpm with 2 axes Rip fence with 2 digital jaws Fpedpfxozk N T So Ad Iei Tool compartment for 5 saw blades Protractor scale with length compensation for extension table Parallel fence with digital display and automatic length compensation when the saw blade is tilted, fence ruler length 1200 mm, can be swung out Availability: short-term Location: 63934 Röllbach well-maintained

Condition: used, Year of construction: 2025, Used machine Year of manufacture: 2025 Condition: like new, delivered in 12/2025 Equipment and technical data: Heavy-duty work table made of heavily ribbed cast iron for maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precise format sliding table made of anodized aluminum – easily movable thanks to a high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Swiveling cast iron saw unit with double segment guide – exact zero-point swivel for the highest cutting accuracy Heavy-duty parallel fence with round bar guide Equipped with a movable eccentric clamping device Integrated miter device on the sliding table – for quick and precise miter cuts Scoring device with belt drive Format sliding table length 2600 mm Cutting length 2600 mm Format sliding table width 360 mm Table length 940 mm Table width 560 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 3200 mm Saw blade tilt 90 - 46° Max. cutting height 90° = 100 mm Max. cutting height 45° = 71 mm Saw blade diameter 315 mm Speed 4000 rpm Scoring saw blade diameter 120 mm Scoring saw blade speed 9000 rpm Fodezk N Txopfx Ad Iepi Motor 6 kW Weight approx. 560 kg Availability: short-term Location: 63934 Röllbach Like new

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data Cutting length: 5300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Frame 100 mm Fpedpfx Aszk N S Isd Ioi Workpiece support: - Stable plastic support for optimal stability, even for narrow workpieces. - Chips are removed via angled slots. Roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Carbide-tipped, 250 mm, hollow-tooth, Z48 Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: incl. workpiece support for narrow parts (5 fields) with strip stop with Supercut pre-scoring device Extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: short-term Storage location: 63934 Röllbach in accordance with its age

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - with electric height and swivel adjustment for the main saw blade, dimension input via keyboard - digital display of the swivel angle and cutting height - CE version - Cutting length 3000 mm - with center and end position locking - Cutting width 1300 mm - Fine adjustment on the parallel fence - Saw blade diameter max. 450 mm - Cutting height max. 150 mm - Cutting height at 45° max. approx. 106 mm - Motor 5.5 kW with 4 speeds 3000/4000/5000/6000 rpm, manually adjustable - with automatic brake and digital display of the speed - 2-axis scoring saw with electric height and side adjustment - RAPIDO scoring system - DUPLEX double-sided miter fence Fpjdpfxjzk N Szs Ad Iji Availability: short-term Location: 63934 Röllbach in age-appropriate condition

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: Fsdpfszk N Rksx Ad Iopi Roller diameter: 500 mm Motor: 1.8 kW Connection: 430 V Upper precision guide Lower guide Telescopic blade guard Cast band saw wheels Cast table, adjustable up to 36° With automatic motor brake Blade tension indicator Max. cutting height: 260 mm Max. cutting width: 480 mm Dust extraction port: 100 mm L x W x H: 965 x 660 x 1925 mm Weight: 280 kg Availability: short notice Location: 63934 Röllbach Condition commensurate with age

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Fpedpozk N Ngofx Ad Isi Equipment and technical data: - With electric height and swivel adjustment for the main saw blade, dimension input via keyboard - Digital display of the swivel angle and cutting height - CE version - Cutting length 3000 mm - With center and end position locking - Cutting width 1000 mm - With digital display and fine adjustment - Cutting height up to 175 mm with a saw blade diameter of 500 mm (in this case, the scoring saw must be removed) - Motor 5.5 kW with 4 speeds 3/45/6000 rpm, manually adjustable - With automatic brake and digital speed display - 2-axis scoring saw with electric height and side adjustment Availability: short-term Location: 63934 Röllbach Well-maintained

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guide rail slightly worn, suitable only for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. feed height: 2200 mm - Max. trimming height: 2100 mm - Max. vertical scoring height: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Dust extraction: 2 x 100 mm Fpjdpfjzk N Hxox Ad Iji - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Availability: short-term Location: Flörsheim in accordance with age

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Condition: completely overhauled and refurbished Equipment and technical data: - Cutting area: 4,200 x 2,100 x 50 mm - CE marking - Rear full enclosure - Scoring unit - Complete with dust extraction hood and saw blade - Control on the saw carriage - Reinforced motor, 4 kW - With strip cutting device - Folding stops and aluminum center support - Adjustable slat grid for horizontal cuts Dimensions: approx. 5250 x 2700 x 1350 mm Weight: approx. 750 kg Fpsdpfx Aezk N Enod Isi Availability: short notice Location: Hesse Very good

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Fully automatic, stationary model Cutting area: 5,300 x 2,200 mm (cutting width x cutting height) Saw blade diameter: 300 mm Control system for vertical and horizontal cuts With aluminum folding stops and aluminum center support With SUPER-CUT pre-scoring device Fsdpfxjzk Nx Is Ad Ispi Motor: 3 kW - 400 V Availability: short-term Location: Röllbach Condition: normal

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels up to 45° to both sides - For vertical miter cuts, the saw blade can be tilted up to 45° to one side - Motor 2 kW, 400 volts, 2800 rpm - Saw blade diameter 300 mm - Dust extraction port diameter 75 mm - Cross cuts 380 x 85 mm - Miter cuts, saw blade positioned vertically, swiveled 45° to the left or right: 265 x 85 mm - Miter cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Fodpfx Adjzk Nxhe Iepi Availability: short-term Location: 63934 Röllbach Condition commensurate with age.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow-tooth Fpjdpfx Adjzk Nwqe Iei Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Dimension readout for: - horizontal saw cuts: via scale and via strip cutting fence - vertical saw cuts: via scale from 0 - 1,300 mm Dust extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller pneumatic workpiece clamping device between the support rollers 1 center support element per meter of cutting length Torsion-free, free-standing machine frame pneumatically retractable slat grid Round bar guide, vertical and horizontal Finely adjustable folding stop Fine adjustment for horizontal saw cuts via handwheel Strip cutting fence Manual programming rail with 5 slot wedges Pneumatic plunging of the sawing unit Pneumatic saw head locking Switch unit on the sawing unit: start button, stop button Control panel with template holder Electronic digital display for the sawing unit Electronic digital display for the folding stop Automatically pivoting saw head Location: Flörsheim Availability: short-term very good

Condition: used, Used machine Fjdpfx Adjzk Nv He Ijpi Used band saw from Budget, model BDS 1101 Motor power: 70 watts Motor speed: 1440 rpm Availability: short notice Location: Solingen Condition: commensurate with age

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Saw blade diameter: 300 mm - Saw blade speed: 4750 rpm - Motor power: 4.5 kW - Motor speed: 2880 rpm - Max. cutting width: 5300 mm - Max. cutting height: 2100 mm - Max. panel height: 2200 mm - Max. processing thickness: 80 mm - With support for small parts - Dimensions: approx. 6500 x 1300 x 2880 mm - Weight: approx. 900 kg Availability: short notice Fsdpfxszk Nnve Ad Iepi Location: 63934 Röllbach in age-appropriate condition

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: well-maintained Equipment and technical data: Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 45 mm Motor: 3 kW Saw blade diameter: 220 mm with SuperCut scoring device with automatic feed system Fodpfx Adszk Nm Eo Ijpi with complete length stop with strip stop Availability: short-term Location: 63934 Röllbach Condition commensurate with age

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Cutting length: 3200 mm Maximum width: 1300 mm Blade diameter: 300 - 350 mm Saw blade tilt: 0-45° Fjdpjzk H Rbofx Ad Ispi Blade rotation speed: 4000 rpm Approximate weight: 1300 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, cutting width (max.): 3,100 mm, saw blade diameter: 300 mm, section length (max.): 3,100 mm, Equipment: CE marking, scorer, HOLZ-HER Pressure Beam Saw LINEA 6015 Cutting length 3100 mm x cutting width 3100 mm Saw blade projection 68 mm Grooves up to 25 mm (bi-directional) 7.5 kW main saw motor 2.2 kW scoring saw motor 3 air-cushion tables 1800 mm with feed rollers Cut-out & recess device (for window cut-outs and insertion grooves) Side pressure, program-controlled Eco mode Handheld control device Label printer and software Easy-Plan optimization (upgrade and office version available) and much more... 12-month warranty Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our distribution warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Fedpoyngt Sjfx Ad Iopi Our General Terms and Conditions can be found on our website at holzher.de/en/terms-and-conditions.