Cut-to-length and miter saw

Graule ZS 170 N

Year of construction: 1998, condition: used, Max. saw blade diameter: 420 mm Lodpfx Agjxwylxereai Cutting height: 170 mm Miter range swivel with digital display: 45°-90°-25° Miter angle tilt with digital display: 90°-45° Hydraulic forward brake Pneumatic material clamps Saw blade spraying device Hand crank for tilting

Condition: used, Technical data: Lajdpfx Agogykicorei Max planing width: 630 mm Max planing height: 250 mm Number of knives: 4 1 roll in the table top Power supply: 400V Engine power: 5.5 kW Feed speed: 6-18 m / min Electric lifting Extraction connector Producer: Steton Overall dimensions: Length: 1220 mm Width: 1330 mm Height: 1370 mm

Condition: used, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Lsdpsiixxnofx Agrjai Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: no Saw blade diameter: 420 mm speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Machine length: Machine width: Weight: 110kg

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic Lajdpjxabztofx Agrsi - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Lsdpfx Agjdy Hm Nsrsai Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: excellent (used), functionality: fully functional, saw blade diameter: 420 mm, Motor 400 V / 2.0 kW Speed 3500 rpm Ledpexdtlfsfx Agroai Cutting length 410 mm (at 90°) Cutting height 170 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 90°-45° (left) Saw blade O 420 mm Suction nozzle 100 mm Weight 120 kg

Condition: excellent (used), RADIAL ARM SAW Graule ZS 170 N Sawblade-Ø 420 mm shipping EU ~300euro Lodpfsl Skkisx Agroai

Condition: new, Year of construction: 2024, ON STOCK!!! Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Ledpfeglfwtox Agreai Edge Banding Machine with PLC Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm radius profile scraper

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Lasdpfxeu R Syps Agrsi Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motor1 x machine stand for type ZS 135 N and ZS 170 NTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Ljdpjvwf Rdjfx Agrsai

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Dimensions (L/W/H) 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31 also for window production ----- Machine is cleaned and functionally checked ! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Lodpfxjvnv Uzs Agrsai Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools (technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 1997, cutting height at 90°: 170 mm Laedpfx Agoxc Hkfjrji cutting length: 410 mm miter vertikal: -60° bis +60° sawblade diameter: 420 mm speed: 2800U/min motor power: 2,2 kW motor brake: yes suction connection: 100mm machine length: 1,20 m machine width: 0,7 m Maschinenhöhe: 1,50 m waight: 110kg

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motorTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Ledpevwf N Tofx Agrjai

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm feed 5 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 capacity 30 degrees: flat 170 x 335 15 - 150 m/min workpiece weight max. 250 kg/m kg 3,0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: Lasdpfx Ageulnb Deroi - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA