Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel saw 1x Compact label printer Hpjdpfx Asxlvkted Tja 1x "eye-M EVO" operating console 1x Human-machine interface software (HMI) MAESTRO ACTIVE 1x Maestro Pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance movable air cushion table - 2500x600 mm, with infeed rollers 1x Double lateral automatic aligner with motor drive 1x Foot switch for START/STOP of operating cycle 1x Grooving device with height-adjustable saw blade via control system 1x "Autosetting" device on the saw carriage for cut length/width 1x Main saw blade motor 25 HP (18 kW) 50 Hz with star-delta starter 1x Quick-clamping of saw blades with mechanical "AKE" flanges 1x Selective collet closure (area 0 - 1600 mm) 3x Additional double collets 4x Additional single-finger collets 1x Compact office label printer 1x Cut editor 1x Maestro Optiwise - Advanced - No. 1 license 1x Maestro Connect: service contract for 1 year (including "plug & play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: GERMAN 1x SPEC01 special version 01 1x European safety regulations (CE marking) Including 123 hours of on-site commissioning (within Germany) (daily working time is 8 hours including travel time). Includes 1 day online training for MAESTRO OPTIWISE PRO (as required) Includes 1 year MAESTRO CONNECT Includes MAESTRO PATTERN IMPORT (normally €255 - free of charge) Location:

Condition: ready for operation (used), 1 pc SCM CNC machine Hpedpex Hwgbefx Ad Toa 1 pc SCM panel saw 1 pc SCM CY7LEX CNC machine 1 pc SCM edge banding machine 1 pc SCM edge banding machine

Condition: used, Year of construction: 1990, machine/vehicle number: 1244, power: 5.5 kW (7.48 HP), lazzari juno 3000i 1990 In good working condition Hodpfx Asxpvcksd Topa

Condition: ready for operation (used), Year of construction: 2002, Giben rip saw Year of manufacture: 2002 New computer installed in 2024 Rits Gripper 7 pcs Transport dimensions: 4 packages Hpjdpfx Adsx Huhie Toa 7.5 cubic meters approx. 5000 kg total Technical data Total saw length 665 cm Saw length 3700 mm Pusher 3300 mm Saw height 90 mm

Condition: used, Year of construction: 2004, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut scale display: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Hpjdpox Edlrefx Ad Tja Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: ready for operation (used), Year of construction: 2013, This MACO VK370 AR ALU Circular Wood Saw was manufactured in 2013. It features a head motor of 5.5 kW, a trim roller motor of 0.75 kW, and a lubrication pump of 0.1 kW. The blade speed ranges from 20–120 rev/min with a maximum blade diameter of 370 mm. It operates at a working air pressure of 5–7 bar. Consider the opportunity to buy this MACO VK370 AR ALU Circular Wood Saw. Contact us for more information. Hpjdpfx Aox D Ehfsd Tja Application Types Sawing (Wood)

Condition: used, Year of construction: 2012, Saw unit: tiltable 45° Carriage length: 2000 mm Max. saw blade diameter: 400 mm Max. saw blade projection at 90°: 125 mm Max. saw blade projection at 45°: 87 mm Saw blade bore: 30 mm Hsdpfx Aox Hwqyed Tjpa Motor power: 5.5 kW Max. cutting width: 1000 mm Control panel: located on the lower machine housing Control panel version: with buttons and digital display Height adjustment: electric motor Tilting adjustment: electric motor Tilting angle display: digital Cutting width adjustment: manual with fine adjustment Cutting width display: digital Sliding table guide: steel Table extension length: 840 mm Cross-cutting at cross fence: 3200 mm Cross fence display: scale Cross fence version: fixed at 90° Speeds: 3/4/5000 rpm Scoring unit: yes Scoring unit adjustment: motorized and manual Scoring blade: Rapido system PSV guard: yes End position interlock: yes Automatic motor brake: yes Working height or feed table height: 910 mm Weight approx.: 1100 kg Extraction diameter: 120/80 mm Description: 120/80 Storage location:

Condition: excellent (used), Year of construction: 1977, Panel saw Hjdpewc Svpofx Ad Tspa Scoring unit Year of manufacture: 1977 1250 mm to the right of the blade 2800 mm cutting length 5.5 kW Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg Not tiltable

Condition: excellent (used), Roller conveyors for the furniture industry WTT Fördertechnik GmbH Type 121 750 pc. complete roller conveyors, each 3m long Price for: 1 pc. = EUR 80 (total length 3m, total weight 60kg) Further price reductions for larger quantities upon request. Detailed description: Roller conveyor length L = 3000 mm Installation length EL = 500 mm Roller pitch T = 200 mm Conveyor height H = 280 mm, adjustable +/- 25 mm Number of support feet FA = 1 pc. per meter Comprises: - 2 side frames (side rails), each 3000 mm long, profile 20/80/40/3 mm, hole spacing 25 mm, holes suitable for shaft diameter 12 mm, powder-coated in RAL 6011 green. Weight per side rail 8.15 kg - 15 plug-in support rollers Series 4.5.80.1.12.1.5.00 Steel tube – 80 x 2.0 mm wall thickness, Shaft – 12 mm spring-loaded shaft, Bearing – Steel insert with reinforced, pressed special ball bearings. Roller surface untreated steel finish. Installation length EL = 500mm Weight per roller 2.4 kg Hpjdewwmitjpfx Ad Tja - 3 bolt-on bridge support feet, fabricated from high-strength welded special profiles with cross brace, height adjustable via M16 threaded spindle with screwdriver slot +/- 25 mm. With base plates and dowel holes. Powder-coated in RAL 3000 red. Weight per foot – 2.5 kg. (Technical specifications subject to change and prior sale excepted)

Condition: excellent (used), Year of construction: 2013, operating hours: 2,520 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 4,800 mm, saw blade length: 4,010 mm, Electric motor Hjdpfx Aex Hql Ded Topa • 11 kW Log cutting length: • up to 4.8 meters Control: • stationary control panel • electric height adjustment • electric dimension adjustment Additional equipment: • cut thickness counter • band lubrication system: Lube-Mizer • electric height adjustment • electric feed Machine dimensions: • Length: approx. 750 cm • Width: approx. 220 cm • Height: approx. 240 cm

Condition: used, Year of construction: 2001, sliding table length: 3000 mm cutting width at the fence: 1300 mm cutting width at the cross cut: 3200 mm cutting depth: 145 mm scoring unit: Ja height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch Hpsdex Edlxjpfx Ad Toa adjustment fence: elektrisch adjustment crosscut fence: manuell read out tilting: Digitalanzeige read out sawblade height: Digitalanzeige read out crosscut: digital Anzeige Ablänglineal: Scala sawblade diameter: 450mm speeds: 4 motorpower: 5,5kW suction connection: 80 und 120mm machine length: 3600mm machine width: 2200mm weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 1950 kg Measurements height 1700 mm Dimensions Machine Length 1700 mm This Wood Band Saw was manufactured in 2020. It features a maximum log diameter of 1100 mm and a cutting length up to 10 meters. The main drive is robust at 15 kW, ensuring efficient operation. It includes a double edger, wood excavator, and various operational enhancements such as an electrically adjustable saw head and multiple feed speeds. Ideal for comprehensive woodworking tasks. Contact us for more information about this machine. Hpedpox D Iprjfx Ad Toa Application Types Sawing (Wood)

Condition: used, Year of construction: 2001, Max. cutting width: 4600 mm Max. horizontal cutting height: 1958 mm Max. vertical cutting height: 2070 mm Max. machining thickness: 60 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Bottom support: fixed rollers Material support: aluminum slat frame with plastic coverings Small parts support: Yes Measuring system: scale Saw head tilting: manual Mounting: free-standing Scoring unit: with saw blade Weight approx.: 700 kg Motor power: 3 kW Extraction diameter: 2x100 mm Storage location: Hedsx Hwqaepfx Ad Tspa

Condition: good (used), Code: 0261 Brand: PUTSCH MENICONI Model: SVP 145 - CE Standard Manual vertical panel saw for carpentry workshops, for vertical and horizontal cutting of panels, semi-finished products, furniture, doors, window frames, plastics and composite materials - CE Standard Hjdpex Dm T Aefx Ad Tjpa Technical data: Automatic electric movable table Max cutting length 4200 mm Max vertical cutting height 2200 mm Max horizontal cutting height 2080 mm Max cutting thickness 60 mm Motor power 5 Hp Blade diameter 250 mm Blade speed 5300 rpm Tilting device for supporting small pieces Lifting wheels device for sliding panels 2 clamps for vertical cuts 4 mechanical positioners for horizontal cuts Digital reader for vertical dimensions Digital reader for horizontal dimensions Overall dimensions of assembled machine mm 5600 x 1500 x 3000 h Overall dimensions for transport: frame mm 5600 x 900 x 2400 h - Weight kg 500 kg - Beam mm 3100 x 1130 x 1150 h - Weight kg 480

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Year of manufacture: 2022 Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Hpodpjx Dmavjfx Ad Tja Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Cutting waste: max. 300 Operating voltage: 400 V 50 Hz Oil filling: HLP-D-32 Tank capacity: 70 l Pressure: 70 bar The machine is unused and dismantled. Inspection possible at any time.

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm Hsdpfovwczyox Ad Tepa - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: new, Year of construction: 2025, Roller diameter: 600 mm Hpsdpfex Edlfex Ad Tja Throat depth: 580 mm Cutting depth: 370 mm Tilting table: yes, -0 to +20° Table size: 810 x 580 mm Band speed: 1660 m/min Motor power: 2.2 kW / 400V Motor brake: yes, automatic Extraction connection: 2 x 120 mm Machine length: 1190 mm Machine width: 800 mm Machine height: 2063 mm Weight: 295 kg

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,500 kg, total height: 1,250 mm, working width: 930 mm, product length (max.): 2,200 mm, General Data Machine weight 1500 kg Measurements height 1250 mm Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Hpjdsx D E T Uopfx Ad Tsa Application Types Sawing (Wood)

Condition: used, Year of construction: 2020, functionality: fully functional, cutting height (max.): 150 mm, saw blade diameter: 425 mm, cutting width (max.): 600 mm, chain width: 600 mm, type of input current: three-phase, input voltage: 400 V, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm Hpjdpfox Dkyysx Ad Tea - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: new, CATALOGUE NUMBER RE022 – new machine, in stock – DTR + CE documentation – cutting width at the guide 1300mm – main engine 6kW TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - cutting length on the carriage 3000mm - main spindle speed 3500/4500rpm - spindle diameter 30mm - main blade diameter 300-400mm - max. scoring diameter 125mm - scoring engine power 0.75kW - scoring speed 8500rpm - spindle diameter 20mm - cutting width at the guide (standard 1050mm, option 1300mm) 1300mm - sawing width using bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90°/45° 90/60mm - cutting height for 350mm 90°/45° 5-115 / 3.5-80mm - cutting height for 400mm 90°/45° 25-140 / 15.5-95mm - diameter of the exhaust port 80mm, 125mm - dimensions length/width/height 3300/3460/1500mm - weight 750kg Optional equipment: - angle ruler - with aluminum strip - additional support table - additional start/stop in the formatting table - electronic cutting width reader on the longitudinal ruler - electronic cutting width reader on the auxiliary table - formatting table 3200mm, 3900mm, 2500mm Net price: PLN 41,550 Net price: EUR 9,890 Net price calculated according to the exchange rate of PLN 4.20/EUR (with larger exchange rate fluctuations, the price may change) Hedpfod Sg Hxex Ad Tspa The prices given are net prices. Net price given for international transactions, customers from the EU with an EU tax identification number.

Condition: ready for operation (used), Year of construction: 2022, This WoodVER UPK-1 was manufactured in 2022. It features a maximum log diameter of 1000 mm and lengths from 2.0 to 6.5 m. The saw has a 550 mm diameter and operates at speeds up to 3000 rpm, powered by dual 18.5 kW motors. It includes an automatic feed, CNC remote control, and hydraulic log handling, enhancing productivity and precision. Contact us for more information about this machine. Application Types Sawing (Wood) Hpodpfx Adsx D I E Ts Toa

Condition: excellent (used), CATALOG NUMBER 7050 TECHNICAL DATA - Wheel diameter: 800 mm - Table dimensions: 1100x800 mm - Angle-adjustable table Hpedpfxjmrrl Us Ad Tea - Motor: 5.5 kW - Max cutting height: 340 mm - Throat/clearance (blade to frame): 680 mm - Extraction port diameter: 90 mm - Dimensions (L/W/H): 1500x950x2600 mm - Weight: 987 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 8,900 PLN Net price: 2,120 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6909 TECHNICAL DATA - Bandwheel diameter: 800 mm - Band width: 20 mm - Maximum cutting height: 400 mm - Main motor: 4 kW Feed: - Metal, geared, driven roller Hpodpfx Adekyrzps Tja - Feed roller height: 130 mm - 8 feed speed options: 2.5; 5; 7.5; 9; 12.5; 15; 18; 25 m/min - Motor: 0.4 kW - Table dimensions (L/W): 810x980 mm - Cast iron table, angle adjustable - Guide with 14 metal slide rollers - Throat (band to frame): 780 mm - Brake - Extraction port diameter: 100 mm - Overall dimensions (L/W/H): 1500x1070x2410 mm - Weight: 560 kg – Resaw for lamella production – Equipped with material feed – Brake – Used machine, very good condition Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at 4.2 PLN/EUR (In case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7051 TECHNICAL SPECIFICATIONS - Wheel diameter: 630 mm - Table dimensions: 890x710 mm Hedpfxomrrm De Ad Topa - Table adjustable in angle - Motor: 3 kW - Max cutting height: 240 mm - Throat (band to frame): 570 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1250x800x2300 mm - Weight: 681 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 7,900 PLN Net price: 1,880 EUR depending on the rate 4.2 EUR (Prices subject to change in case of significant fluctuations)

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS Hpsdpfxjxpvk Is Ad Toa - max diameter of main blade with scorer: 350mm - max cutting height: 105mm - main blade adjustable up/down + tilt - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW - extraction port diameter: 100mm - table dimension: 115x625mm - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)