Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm Hedpfx Aaszk N Hxs Eefi - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 1991, Used machine Hsdpfezk Nx Iex Aa Ejfi Year of manufacture: 1991 Fully automatic vertical machine, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control for vertical and horizontal cuts, with ALU folding stops and ALU center support, with SUPER-CUT scoring unit Motor 3 kW - 400 V Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm Hfsdpfx Aajzk Nxho Eoi - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Availability: short notice Location: 63934 Röllbach

Condition: used, Used machine Used coping saw from Budget, model BDS 1101. Motor power: 70 watts Motor speed: 1440 rpm Hedpfezk Nv Hex Aa Ejfi Availability: short notice Location: Solingen

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Hfodpfszk Nwqex Aa Eei Location: Flörsheim Availability: short-term

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Saw blade diameter: 300 mm - Saw blade speed: 4750 rpm - Motor power: 4.5 kW - Motor speed: 2880 rpm - Max. cutting width: 5300 mm - Max. cutting height: 2100 mm - Max. panel height: 2200 mm - Max. processing thickness: 80 mm - With small parts support Hfedpfxjzk Nnvj Aa Eji - Dimensions: approx. 6500 x 1300 x 2880 mm - Weight: approx. 900 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: well-maintained Features and technical data: Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 45 mm Motor: 3 kW Saw blade diameter: 220 mm with SuperCut scoring unit with automatic shifting grid Hfjdpfxezk Nm Eo Aa Esi with complete length stop with strip stop Availability: short-term Location: 63934 Röllbach

Year of construction: 1992, condition: ready for operation (used), A chain-feed multi-rip saw is offered. Cutting width: 230mm, max. passage width: 650mm, max. cutting height: 130mm, saw arbor diameter: 65mm, min. workpiece length: 450mm, saw arbor speed: 3900rpm, working height: 850mm, max. feed speed: 48m/min. Dimensions: approx. 2700mm/1900mm/2000mm, weight: approx. 2500kg. Inspection by prior arrangement is possible. Hjdpozl U Idofx Aa Eefi

Condition: used, Year of construction: 2019, total length: 4,200 mm, total width: 1,200 mm, total height: 2,450 mm, Colour: Black Hsdszk Ia Djpfx Aa Eofi Weight: 600 kg - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5025 CV - Max. cutting height horizontal [mm]: 1550 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 55 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 6.6 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 4200mm x 1200mm x 2450mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA - Track width: 250 mm - Roller width: 400 mm - Max. blade diameter: 400 mm - Blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2120 mm *From above: - Pawls - Pressure roller, smooth - Pawls - Pressure roller, smooth - Saw shaft - Smooth pressure rollers, 2 pcs. From below: - Guide - Sliding shaft, smooth - Pawls - Track - Central lubrication - 2 lasers - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric lifting of the frame: 0.75 kW - Electric lifting of the saw shaft: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200x1850x2100 mm - Weight approx.: 3000 kg ADVANTAGES Hfjdpoza D Rrjfx Aa Esi – German manufacture – Laser – Electric lifting of the frame and shaft – Infinitely variable feed speed adjustment – Used multi-blade saw, in very good condition Net price: 109,900 PLN Net price: 26,160 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide Hodpfxeza Edao Aa Eefi - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: used, Year of construction: 2010, Sliding carriage: 3000 mm CNC parallel guide, cutting width 1000 mm. Motor: 5.5 kW electric motor for height and swivel adjustment. Swivel range: 0.5 - 47°. Digital display for swivel angle and cutting height. Saw blade diameter: max. 550 mm. Cutting height: max. 200 mm. Prepared for a scoring saw. Control panel at eye level, swiveling. Front table, swiveling. Table extension 840 mm. Angle/miter fence 3200 mm. Hfsdpfxezccg Ds Aa Eei Location: Supplier.

Condition: used, Year of construction: 2018, machine/vehicle number: 1000023651T, functionality: fully functional, power: 50 kW (67.98 HP), input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 3,200 mm, Equipment: documentation/manual, Selco WNAR 6 miter saw center. Hedpfx Ajzl T Hlea Esfi

Condition: excellent (used), For sale is a used Felder circular saw and milling machine, model KF700P, with a cutting width of 800 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Hfjdpozk Eicofx Aa Eei Technical specifications: - Circular saw and milling head, tiltable 90-45° - Sliding table 2050 mm - Extension table 1300 mm with miter fence 2,600 mm - Cutting width 800 mm with full table support - Milling fence 230 mm with multi-adjustment system - 4 milling speeds 3500/6500/8000/10000 rpm - 2 motors, each 5.5 HP (4 kW), 400 Volt The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, milling machine, combination machine, combo machine Reference: R-L07LE

Condition: ready for operation (used), Year of construction: 1996, Make: KGM Type: SK560 No.: 96-1600-1 Year: 1996 Cross-cut saw with a large cutting capacity; features hydraulic feed for the saw guard and discharge arms, and a pendulum-action saw blade; suitable for heavy, long workpieces such as glulam beams, etc. TECHNICAL DATA Infeed conveyor: 6 meters, 600 mm rollers Hfsdpfxszl Tuvj Aa Eoi Cross-cut saw with hydraulic power unit Cutting capacity approx.: 200 x 600 mm (height x width) Outfeed conveyor: 8 meters, 600 mm rollers + additional 2-meter conveyor section Power: 400 V, 50 Hz, 3-phase

Condition: used, Year of construction: 2020, Cutting capacity 1350mm Cutting height about 70mm Blade diameter 500mm Automatic end stop of 6700mm Maximum forward speed 60m/min Hfjdpfx Aezk D Rfea Eei

Condition: used, machine/vehicle number: 2708-07, power: 7.5 kW (10.20 HP), cutting height (max.): 115 mm, cutting width (max.): 1,000 mm, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, Equipment: saw blade guard, Cutting length, max. 5600 mm Cutting width 1000 mm Cutting height, max. 115 mm Electric feed Motor power 7.5 kW Hfodezl Tafepfx Aa Eoi Protective bar

Condition: used, Year of construction: 2015, functionality: fully functional, power: 38 kW (51.67 HP), • Year of manufacture: 2015 • Max. trunk diameter: 1.5 m • Automatic, hydraulic belt tensioning • Automatic pre-cutter • Automatic board guiding system • Max. trunk length: 8 m • 8 hydraulic clamps • 3 trunk turning devices with left-right positioning • Automatic control • Automatic lifting belt conveyor for boards Hfodpfx Aaezl Stws Eei • Dust extraction system • 38 kW motor Price: 40,000 euros

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Maximum feed width: 70 cm 0-line on the left Adjustable saw blade on the right Immediately available Hodpfjzl N Tnox Aa Eofi Location: Austria, near Ried im Innkreis

Condition: new, Year of construction: 2026, Key features: Main saw blade diameter: Ø250–350 mm Saw blade spindle diameter: Ø30 mm Scoring saw blade diameter: Ø120 mm Scoring saw blade spindle diameter: Ø20 mm Saw blade tilt: 0–45° Main saw blade speed: 4000 rpm Scoring saw blade speed: 8000 rpm Maximum cutting height (90°): 120 mm Maximum cutting height (45°): 92 mm Maximum rip capacity: 1250 mm Sliding table length: 3200 mm (optional 3800 mm) Tables: Main table: 910 × 550 mm Front extension table: 910 × 760 mm Side extension table: 500 × 550 mm Heavy-duty, high-precision aluminum sliding table. Drive: Main saw motor: 5.5 kW (7.5 HP) Scoring saw motor: 0.75 kW Power supply: 400 V / 50 Hz, three-phase Dimensions and weight: Weight: approximately 610 kg Hfodpjzl N Avofx Aa Eji Dust extraction port: Ø120 mm Recommended working space: approximately 6.9 × 4.9 m Standard equipment: Aluminum sliding table Parallel fence Angle fence with two stops Scoring saw with separate motor Saw blade guard Extension tables Eccentric material clamp CE safety equipment. Advantages: Precise cutting of sheet materials and solid wood Robust construction for a long service life Large cutting height up to 120 mm Sliding table enables precise cutting of large panels Scoring saw ensures a clean cut on coated panels without splintering

Condition: used, Year of construction: 1976, Description to follow! Hfjdpfswqrw Asx Aa Eei

Condition: used, Year of construction: 1992, Offer in progress! Hfodewh Uhfjpfx Aa Esi

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: Very well-maintained (from a public facility) Hsdpfx Aezkw Ahoa Ejfi Technical features: Table size: 862 x 1504 mm, made of cast iron, incl. standard table extension Table height: 900 mm Rip fence/slider: 3000 mm, made of aluminum Saw blade change: Quick-change system ProLock Saw blade diameter: 250 - 550 mm Saw blade swivel: +46° to -46° Cutting height: max. 204 mm/saw blade 550 mm; max. 134 mm/saw blade 550 mm at +45° and 125 mm at -45° Motor power: 7.5 kW (10 HP) 400 V-50Hz, Constant speed: 3800 rpm, Infinitely variable speed control from 2000 - 6000 rpm Cutting width: 1100 mm Length stop with 2-point support and two stop elements, fine adjustment with magnifying glass for the inner stop segment, dimension display with scale, length compensation for miter cuts with electric support, additional workpiece support near the saw blade, cutting line 255 - 2025 mm, extendable to 3365 mm Control panel at eye level, can be swiveled away, ergonomically advantageous, adjustable inclination, twice rotatable, incl. template holder Performance features of the control system Touch-screen control panel 10.4" (264 mm) for T 75 Prex Cutting height and cutting angle controlled electronically Cutting width controlled electronically Electromotive positioning of the parallel stop Incl. sensor-monitored safety guard Automatic length compensation "RadioCompens" (length stop) incl. radio-controlled adjustment of the parallelogram cross table Electrically positionable scoring width - scoring saw Electrically positionable scoring height - scoring saw Electrically positionable scoring width left-right - scoring saw Adjustment and digital display of the tool position (cutting height/angle) based on stored tool data Miter cuts and crosscuts with thickness compensation Tool data memory for 50 workdays Automatic referencing of the axes Controlled and manual movement of the controlled axes possible Display for speed and tool diameter Integrated calculator with axis-related memory function, integrated operating hour counter Mitrex double miter fence Miter cutting system "RadioCompens", 2-point support consisting of: digital 2-point length stop, parallelogram cross table with radio connection to the control system (full integration of the table angle as the 5th axis in the control system) Front table 600 x 350 mm, foldable Availability: Short-term Location: Flörsheim

Condition: used, Year of construction: 2010, functionality: fully functional, load capacity: 3,200 kg, Rotating device ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2010 ISO 3A (51 cm) Hodezl Ivnspfx Aa Esfi Capacity 3200 kg Rotator 360° Width 1150 mm Forks 1400 mm ID OS2075

Condition: used, functionality: fully functional, load capacity: 3,500 kg, Rotating device ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Hedpfx Aajzl Ivhe Ejfi ISO 3A (51 cm) Capacity 3500 kg Rotator 360° Width 870 mm ID OS2071