Radial Arm Crosscut Saw

Wadkin BRA 400

Condition: as good as new (ex-display), Year of construction: 2021, Working width: 520 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Nwjdpfjgr Udvsx Ah Hjb Hollow point adjustment: no Gap removal display: Scala Hollow pointed joint display: - Dressing stop angle adjustable: yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000mm Weight: 870 kg

Condition: used, REX four-sided planer, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles have 2 rotation speeds, electric table lifting device Nodpfxjrxf Smo Ah Hjwb

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 20,200 h, load capacity: 5,500 kg, fuel type: gas, Equipment: clamp, gripper hydraulics, For sale is a Hyster S 5.5FT gas-powered forklift. Nedpfswalyiox Ah Hjwb The forklift is fully functional and in good condition. Not offered with forks as shown, but with a Mayer paper roll clamp with rotary hydraulics from 2005 (last photo). Technical specifications: Year of manufacture: 2012 Rated load: 5500 kg (5.5 tonnes) Load center: 600 mm Turning radius: approx. 2375 mm - 2534 mm Lift height: up to 5300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm * 1,420 mm * 2,500 mm mm Weight: approx. 7,800 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: excellent (used), Genini Miniautomatic Pass-Through Lathe Turning machine from square timber Main spindle with a two-speed motor with a power of 4.9/5.9kw Nwsdpfxjv Hgcto Ah Hob Hydraulic pump motor with a power of 1.5kw Maximum length of square timber 950mm Maximum turning length 120mm Maximum turning diameter 80mm Two supports with profiling knives 1 front spindle for drilling or front profiling 1 roughing turning knife Machine weight approx. 1800kg

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Nwedpfspqxnxex Ah Heb

Condition: used, Calibrating machine brand Sandingmaster model CSB/2/900, roller + pad, with 900 belt, roller motor of approximately 11 Kw, pad motor of approximately 7.5 Kw. Used. Nwsdpfx Aoiv Dauoh Hjb Sandingmaster brand calibrator model CSB/2/900, roller + pad, with 900 carpet, roller motor of about 11 Kw buffer motor about 7.5 Kw. Used.

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. Nodpfx Asulzcheh Hswb (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), CATALOG NUMBER 7571 Technical specifications: - Roller width: 510 mm - Table length: 3040 mm - Noise reduction comb - Roller guard - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence with angle setting - Motor: 3 kW - Extraction port diameter: 130 mm - Dimensions (L/W/H): 3040x850x1000 mm - Weight: 1032 kg ADVANTAGES – German-made – Possibility to mount profile knives – Long tables – Used jointer Nwodpfxev H Dugj Ah Hob – Very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: like new (used), Year of construction: 2023, 350mm max saw diameter 890mm crosscut capacity 95mm max depth of cut 4hp motor Nsdswl Hxdspfx Ah Hjwb Swivelling and canting facility with fixed locking at 45 degrees Spring return for saw unit MDF table Year - 2023 CE Condition - Never been installed. Condition almost as new

Condition: used, Year of construction: 1980, Dimensions (LxBxH): 160 x 335 x 150 cm Price: On request 1e as: Single saw 2e as: Upper 3e as: Lower 4e as: Multibladesaw - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 10517 - Number of spindles [pcs.]: 4 - Max. planing width [mm]: 620 - Feed table length [mm]: 1070 - Diameter extraction nozzle [mm]: 110 - Transport dimensions: 1600mm x 3350mm x 1500mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Nwsdpfxownh Uxe Ah Hsb