Condition: used, Pilous CTR750EV bandsaw, very good condition, 5.5 kW, S6 7.5 kW, 3.6 m cutting length, 460 kg Price changes reserved, errors, misprints, and typographical mistakes excepted. Lrsdpfx Aewzzf Dsb Asu

Condition: repair required (used), Year of construction: 2003, functionality: fully functional, total length: 7,000 mm, number of previous owners: 1, The stepped slide is fully functional and was in operation until the plant was converted. The system is being sold as in need of overhaul. There is wear and tear on the mechanical guides and drive elements, consistent with its age. Welding and maintenance work are recommended for its long-term reuse. Ledjzwpxzspfx Ab Ajru It is ideal as a cost-effective project for refurbishment or as a robust source of spare parts.

Condition: used, RMS 300 Reignmac Multi Rip Saw. Came out working. 33.37kW . Saws 200mm to max of 305mm Ledez Dx Agepfx Ab Asru

Condition: used, machine/vehicle number: G-BBS112186P, Hydraulic log band saw Forestor CTR800H including the following accessories: 3m extension section, chain log turner, hydraulically rotatable log lifter, hydraulic log lifter with drive, saw band tensioning device, 11 kW motor, Lredpsvw Eb Asfx Ab Aeu pre-cutting device, ammeter, saw band guide electrically adjustable, LG Automat, irrigation pump with automatic switch-on Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), functionality: fully functional, Valon Kone VK 32S Condition Used, refurbished Rotor Upgraded to the latest version Operational readiness Immediately ready for use Availability Immediately available Location Warehouse in 3525 Lugendorf, Austria Selling price Upon request Technical specifications Debarking width 81 cm; log length from 3.5 m; feed speed 22.8–67.2 m/min; rotor drive 37 kW; machine weight approx. 9,000 kg; Lrjdpfez N S Sasx Ab Aeu According to the current machine specifications, the debarking width is 81 cm. The remaining technical specifications are based on the existing VK-32S operating manual and refer to the original version. Changes resulting from the rotor modernization and the specific scope of delivery will be specified in the individual offer.

Condition: used, Year of construction: 1987, operating hours: 30,463 h, functionality: fully functional, track width: 1,900 mm, number of previous owners: 1, Equipment: cabin, crane, low noise, RSTW, year of manufacture 1987 / Crane ASX II, 1998 Track width: 1.9 m Cabin on the right side Crane positioned in front of the cabin Four-wheel drive Equipped with a timber bunk Equipped with a trailer Lodpozv N Dbofx Ab Ajru Equipped with rails and concrete slabs

Condition: reconditioned (used), • 150 mm cutting height Ljdpfjw I Sg Dex Ab Aeru • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: good (used), Year of construction: 2007, functionality: fully functional, Note: Machine is still at the customer’s location – available at the beginning of 2027. For sale is a mobile Hartenberger “Wirex CZ-1/1 band sawmill / mobile sawmill in a robust design. The system is designed for cutting roundwood or logs into boards, planks, and timbers. The existing hydraulic log handling system with a loading/lifting arm, log turner, and log clamp allows larger logs to be handled and positioned on the system. Technical data / equipment: Manufacturer: Hartenberger woodworking machines Model: Wirex CZ-1/1 Machine type: Band sawmill / mobile sawmill Year of manufacture: 03/2007 Motor power: 12 kW Total weight: approx. 2,500 kg Width: approx. 2,355 mm Height: approx. 2,850 mm Mobile design Tandem chassis Electric, continuously variable feed Feed speed: approx. 4–35 m/min Electric height adjustment via chain Roller diameter: approx. 500 mm Saw band length: approx. 4,800 mm Ledpfozxrnnox Ab Aeru Saw band width: approx. 35–45 mm 1 loading/lifting arm 1 log turner with gripper 1 hydraulic log clamp Hydraulic log handling Roller/support track for the logs Dust extraction connections Stable steel frame construction Condition and scope of delivery according to photos The system is in used condition, corresponding to its age, and shows corresponding signs of wear. Inspection and demonstration possible by appointment. Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes subject to confirmation. All information without guarantee.

Condition: ready for operation (used), functionality: fully functional, High-performance rotor debarker designed for efficient and continuous bark removal in sawmill lines. The machine is built for heavy-duty industrial use, ensuring excellent log cleanliness and extended saw blade lifespan. Log Diameter Capacity: 10 - 45 cm The debarker is sold as a complete operational line setup, including the following auxiliary equipment: Log Infeed Ramp (Log Deck) Log Singulator & Step Feeder System Additional Outfeed Head Additional roller conveyor Lrsdpfjztqdqsx Ab Asu It's still conected and working

Condition: refurbished (used), functionality: fully functional, Centering unit, Linck ZZV type Ljdpfjz Hc Hbsx Ab Ajru 2 x 5 rollers, hard chrome-plated hydraulic closing cylinder with valve block new feed motors suitable for the required feed speed.

Condition: like new (used), functionality: fully functional, Log sorting line with 4 pockets, 2 on each side. Material diameter: 100-500 mm, length: 3-5 m. Accumulation conveyor, 12 m, new. Stepfeeder, new. Receiving conveyor, 10 m, refurbished. Pockets, 13 m, 50% new. ABB and Siemens electronics, new. Hydraulic system, new. Lrodjz Dtchopfx Ab Asu

Condition: as good as new (ex-display), Demonstration machine Robust band saw for logs up to 71 cm in diameter with extendable rail sections—extension is unlimited. Automatic feed with continuously variable speed. Electric height adjustment controlled from the operator panel. 3.8-inch touch LCD display for height adjustment. Saw unit suspended on both sides for increased stability and improved precision. CE certified. Ledpfx Absvr I Rcj Aoru Technical data: Max. log diameter: 71 cm Max. board width: 67 cm Motor output S1: 5.5 kW Cutting length, base version: 2.1 m Cutting length, extension section (optional): 3 m, 1 m Weight: 550 kg Extras not included in the price (sample image).

Condition: excellent (used), Year of construction: 2024, We offer for sale a heavy-duty double-blade angular saw type D9, designed for efficient processing of hardwood logs up to 4 m length. The machine is in very good condition and is supplied as a complete line including clamping wagons, conveyors, sorting system, and operator control cabin. Key Features & Benefits Double-blade angular cutting system (horizontal + vertical saw) Designed for hardwood processing High-performance industrial solution Smoothly adjustable feed speed Complete technology line including conveyors and sorting Includes operator control cabin Energy-saving system with braking energy recovery Technical Specifications Cutting System Saw blades: 2 × 500 mm (horizontal + vertical) Saw head power: 2 × 22 kW Blade speed: approx. 2,900 rpm Max. cutting section (angular): approx. 180 × 180 mm Material Capacity Lsdpszgtfqofx Ab Aeru Log diameter: approx. 100 – 800 mm Log length: approx. 2,000 – 4,000 mm Processing line for logs up to 4 m Feeding & Handling 4 clamping wagons, each with clamp and rotator 1 transport wagon with travel motor (approx. 30–32 kW) Adjustable feed speed up to approx. 120 m/min Horizontal compensation of tapering Hydraulic system with lubricated track and wagons Drive & Power Main motors: 2 × 22 kW Saw head feed servo (X axis): approx. 5.5 kW Clamping tower servos (Y axis): 5 × 5.5 kW Travel motor: approx. 30–32 kW Hydraulic unit motors: 5 × 3 kW Total installed power: approx. 135 kW Control & Equipment Operator control panel 2 laser guides Remote access system Measurement of power consumption Hydraulic heating function Electric cabinet heating Conveyors & Line Equipment Infeed system: 2 × infeed conveyors, each 6 m long Heavy-duty 3-chain construction Integrated log handling and transfer system Chip extraction belt conveyor (cutting waste removal) Outfeed system: 1 × single-sided tilting conveyor for waste 2 × sorting conveyors for processed timber (both sides discharge) Sorting System Extraction Requirements Required extraction capacity: min. 8,000 m³/h Connections: 150 mm + 2 × 200 mm Dimensions & Weight Machine length: approx. 36,500 mm Machine width: approx. 3,000 mm Machine height: approx. 3,000 mm Total weight: approx. 13,500 kg Condition & Sale Terms Condition: Very good Fully operational industrial line Sale includes control cabin Dismantling and removal to be arranged by the buyer Advantages Complete production line High productivity for hardwood processing Strong and reliable industrial construction Precise cutting and stable output Efficient handling with integrated conveyors and sorting

Condition: used, Connecting rod / bar frame strut / connecting rod as a spare part for a Wurster & Dietz GXV 71 or EWD bar frame. Technical data: - Overall length: approx. 3,270 mm - D1: 190 mm Lrodpfx Abszrx Ete Aju - D2: 150 mm - Material thickness: 50 mm - Centre-to-centre distance: approx. 3,020 mm

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11598-A, overall weight: 3,900 kg, input frequency: 50 Hz, input voltage: 380 V, We are offering this used TAYME P-60 debarker, year of manufacture 2011. Lodoycutcspfx Ab Aeru Technical Data – Debarker TAYME P-60 Peeling Machine (Year 2011) Manufacturer: TAYME S.A. Model: P-60 Machine type: Log debarker / Peeling machine Year of manufacture: 2011 Serial number: 11598-A Weight: 3,900 kg 1. Mechanical Specifications Tool type – Peeling heads with toothed knives Maximum pressure – 400 bar 2. Electrical Specifications Rated voltage – 380 V (three-phase) Frequency – 50 Hz Estimated power – approx. 25 kW 3. Hydraulic System Hydraulic flow rate – 22 l/min (according to nameplate) Maximum pressure – 400 bar System type – Stand-alone hydraulic unit with tank and three-phase motor 4. Main Function Industrial machine designed for: - Debarking logs of various diameters - Preparing wood for pallets, packaging, chipping, or primary processing - Peeling through toothed heads and hydraulic pressure The machine is located in Valencia, Spain, and is ready for loading and shipping worldwide. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Lrsdpfezrtpmjx Ab Aou Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: refurbished (used), functionality: fully functional, /// MONOBLOC COLUMN MODEL 1300/ SHF - Cast iron structure with stabilization treatment. - Cast iron flywheels, ellipsoidal shape, flywheel diameter 1300 mm. - Flywheel width of 165 mm for maximum blade width of 180 mm. Lodezmfrcepfx Ab Aeru - Flywheels with solid discs with special ribs to enhance mechanical characteristics, subjected to stabilization treatment; modeled with a double curvature for the best stability on the table; perpendicular to the axis of rotation. - Tilting the upper flywheel to adjust the blade thrust. - Hydraulic blade tensioning with tension indicators. - Main motor 55 kW (75 HP), automatic star-delta start, pulleys, belts and brake - For 180 mm wide canvas ///Carts hydraulic PRIMULTINI with 4 MORSE - 4 hydraulic morses - Max. clamp blade distance 1000 mm - Maximum needle opening 900 mm - Simultaneous hydraulic clamps - Fast and precise movement of clamps - Electronic module 2026 for control MOVEMENT clips - return arms - Hydrostatic advance - Automatic centralized lubrication with pump - Double control unit with seat - Cables ELECTRICAL and electrical panel - Flat and profiled rails for a maximum cutting length of 6 m MANUFACTURER PRIMULTINI ITALY - REFURBISHED LIKE NEW 2026 OPTIONAL: -Log ramp, length 4 m..... 20,000 eur excluding VAT -Log loading arms on the log saw trolley hydraulically operated with a single cylinder..... 20,000 eur without VAT - Conveyors with ROLLER for unloading - length Approx. 7m , width 1m ..... 20,000 eur excluding VAT SECOND UNLOADING ROLLER -length 6.3 m approx. ..... 20,000 eur without VAT

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Ljdpfx Aoxl Aauob Aoru

Condition: excellent (used), Catalog number: 8105 TECHNICAL DATA - Min. length of cut elements: 500mm - Max. length of cut elements: 5860mm - Min. diameter of processed raw material: 60mm - Max. diameter of processed raw material: 380mm - Min. width of cut log: 50mm - Max. width of cut log: 250mm - Power of head motors: 2 x 5.5kW - Feed motors: 2 x 0.75kW - Feeder feed – smoothly controlled by a frequency converter - Bandsaw: - Saw blade length: 4004mm - Saw blade width: up to 42mm - Saw blade pitch: 22mm Lodpfxezzxpqj Ab Aeru - Saw blade thickness: 1.1mm - Wheel diameter: 600mm - Saw blade cooling - Emergency stop - Height of the machine feeder table: 840mm - Automatic retraction of side heads - With ŁPW-3 self-loading feeder - Feeder motors: 0.75kW - Feeder dimensions (L/W/H): 4330x1220x1420mm - Feeder weight: 450kg - Dimensions of additional feeder extension: 2570x1030mm - Machine dimensions (L/W/H): 4910x1620x2000mm - Machine weight: 950kg ADVANTAGES - Smooth feed controlled by a frequency converter - Original DTR documentation + CE certification - With self-loading feeder - Automatic retraction of side heads - ANP-05 controller - Unpainted - Used machine, very good condition Net price: 35900 PLN Net price: 8350 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: ready for operation (used), Ring debarker for logs type VK26 Ljdpfx Aoz Rnq Ijb Aeru Capacity: Min log diameter : 10 cm Max log diameter : 60 cm Min log length : 3 meter Feed speed : 16 - 40 m/min

Condition: good (used), length 5 meter. working diameters 220 mm - 600 mm Lsdjv Scfzspfx Ab Asru

Condition: used, Year of construction: 1995, operating hours: 37,000 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: crane, low noise, Well-maintained Wolf sorting truck. Lodpfx Abszwd Dxj Asru Being replaced by a new Baljer & Zembrod unit. Epsilon E380 crane. Concrete weights will be removed.

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). Lrsdovrvq Dspfx Ab Aou CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel Lrjdpfxjyrdg Do Ab Aeu - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. Lrsdol H Hy Hjpfx Ab Asu - diameter of the processed log 100 - 320 mm - length of processed log 1250 mm - 6000 mm - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. - power of main motors 55 kW + 75 kW Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation